Driver problem for linux

i want to know that which linux is suitable for  my laptop. please tell me. i installed ubuntu 14.04
but there were problem for touch pad. i installed red hat linux but touch pad didnot support. so which linux is suitable for my laptop?? please solve this....

I have Kubuntu 14.04 and have had no trouble. I also have a Synaptics touchpad and it works great.
I have never had to use it but there is a Linux project for Synaptics support:
http://cscott.net/Projects/Synaptics/

Similar Messages

  • ODBC instant client driver rpm for Linux X64

    Hi,
    Can anyone tell me where can I find odbc instant client driver rpm for Linux X64 edition.
    I can only see for Linux x32 not for X64.
    Edited by: user11128035 on Sep 6, 2009 3:13 AM
    Edited by: user11128035 on Sep 6, 2009 3:15 AM

    I don't understand your step 7 (the first step 7, actually).
    What is that unixODBC-2.2.14-linux-x86-32.tar.gz, where did it come from, and why are you doing all that?
    unixODBC should be installed after step 5.
    I guess that that is the cause of your problem.
    isql is not linked against readline at all on my RHEL 5 system.
    Do you notice any improvement after removing the files from that tar.bz file?
    Yours,
    Laurenz Albe

  • Give me driver mainboard for linux please

    Give me driver mainboard for linux please

    Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how you are looking for a driver for your desktop computer using Linux, and I would be happy to help you in this matter! For further assistance on Linux-based Operating Systems on HP computers, I recommend taking a look at this document on Frequently Asked Questions About Linux (FAQs).  I hope this helps! Best Regards

  • Driver wireless for linux

    please help me!!
    i have toshiba satellite c840 series ; corei3
    i have problem Why wireless toshibac840 not detected on linux?? is it necessary to install the driver?? and where do I get the driver?

    I have never seen any Linux drivers on the Toshiba website. Figure out which company's wireless hardware is being used on the computer and go to that company's website for Linux driver.

  • VIA Chipset has Driver problems for ver. 4.42...

    VIA based MSI Mainboard has bad driver problem.
    any time computer reset..!
    this chipset has in bridges and VGAs drivers problems...  i have problem and i read in forums this eror. is this right? ?(
    please help...
    soryy for my bad english... i can't...

    I use the VIA 4.37 that came on the MB cd with my KT3 ultra with no problems at all....Uninstall the drivers and try a different set!!!
    I have never seen a performance gain from switching via drivers so when i last formatted i just stuck the 4.37 on and everything is running normal and stable so no need for me to update them!!
    also try reinstalling directX after you install your via drivers. VxD has some ties to DirectX

  • Driver problem for hp deskjet ink advantage 2515

    my HP Deskjet ink advatage 2515 only print file from Microsoft word. and we cannot found any installer for HP deskjet ink advantage 2515. if we do download a driver from the result in the website of HP the driver is for HP deskjet ink advantage 2510 series.

    Hello teamcalabanga,
    Welcome to the HP Forums.
    I see that you are having some driver and connectivity issues.
    I suggest that we start off by running the HP Print and Scan Doctor.  If the Doctor fails, please let me know where it fails as well as any error codes you may see. 
    Thanks for your time.
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Nvidia Geforce 650m driver problem for windows 8.1 on macbook pro

    Hey guys. I installed windows 8.1 on my macbook pro (mid2012, Intel core i7, retina, Geforce 650m) of course only for game, but I have a disappointing problem with the graphics driver. First I tried to instal graphics card driver by bootcamp (not the last version, the one before the last) .It started to install drivers one by one starting with graphics card, but suddenly the screen got black and remained black forever! I restarted the windows and guess what! after windows logo it got black and nothing more! Then I installed windows again and tried to install driver from windows update. It checked for update and found the driver for it and downloaded it and started to install, but again the black screen !!! Please help me thanks.

    DemetriAA wrote:
    no this does not work. bootcamp drivers are broken for windows 8.1 on an efi install. apple is withholding the discreet gpu drivers from microsoft to trick people into thinking osx is more stable/efficient and thus windows cannot detect which gpu it is supposed to use when it can see both. the discreet gpu is hidden in the fake bios setup that bootcamp wants you to install with. the problem with doing this is that the more powerful gpu is all you can use in windows so the computer runs more hot and is louder which is annoying and hard on the battery life.
    thanks apple, if i knew that when i bought the laptop i would have gone with something else.
    This is not correct. If you force an EFI installation on a preUEFI Mac, you will see GPU and Audio errors. A non-EFI Hybrid MBR installation works correctly. Does Windows have the ability to switch GPUs? OS X, using external monitors, uses the non-Intel discreet GPU and the machine does not run hot. If Windows can provide dual-GPU support (which they have) and also provide GPU-switching (missing), this can be done. Can it be done for older hardware, highly unlikely. MacRumors has threads with PCI Register changes to expose the Intel GPU and the machine still runs hotter.
    From Bootcamp Info.plist...
           <key>PreUEFIModels</key>
            <array>
                    <string>MacBook7</string>
                    <string>MacBookAir5</string>
                    <string>MacBookPro10</string>
                    <string>MacPro5</string>
                    <string>Macmini6</string>
                    <string>iMac13</string>
            </array>
    You can verify your Model Identifier from How to identify MacBook Pro models - Apple Support. The 2012 MBPs are 9,x models.

  • NI GPIB driver support for linux 2.4

    Is the NI linux GPIB driver compatible with the Linux 2.4 kernel? Does the NI linux GPIB driver provide a generic device interface (i.e. independent of LabVIEW)? I would like to access the driver using the POSIX interface (i.e. read/write/mmap etc.) via a standard device node (i.e. in '/dev'). We are looking to add a PCI-GPIB interface to our generic control and monitor system. The initial application will involve special purpose software interfacing with external test equipment (scope, power supply, etc.). The current platform is an Intel based industrial PC running Linux 2.4. This system will NOT be able to support data visualization via LabVIEW.

    Unfortunately, the current BETA driver (0.6) released by NI does not support version 2.4.x of the Linux kernel. There are plans for support in the future but no timeline has been specified. I would suggest checking back with NI on occassion at http://www.ni.com/linux for the latest news and support of the Linux OS.
    Ryan Mosley
    National Instruments, Applications Engineer
    http://www.ni.com/exchange

  • JDBC Driver Problems for Oracle 10

    Trying to setup an OCI driver in our system but keep getting this response.
    INFO 2005-12-02 08:49:40,868 [STDOUT] java.lang.UnsatisfiedLinkError: C:\_EP\coldfusion\cfusion\lib\ocijdbc10.dll: The specified procedure could not be found
    INFO 2005-12-02 09:02:35,008 [STDOUT] A non-SQL error occurred while requesting a connection from DEVX2
    INFO 2005-12-02 09:02:35,008 [STDOUT] Timed out trying to establish connection
    That file exists on that path, so I'm not sure if this message means that it can't find that dll, or a procedure within that dll.
    If I set it up to use the thin client... no problems. This is very strange. ojdbc14.jar is on the classpath as well as all the DLLs needed, and I have the client installed on my machine.
    What else could I possibly need?

    Prior to 10g, Oracle claimed to require the entire Oracle client installation for the OCI driver to work; allegedly you couldn't just pick up the dlls you needed...
    With 10g, they've supplied a stripped down "Instant Client" that has just the bare bones stuff (it's still 10MB, zipped):
    http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/winsoft.html
    They still recommend that you install the client and add an entry to your classpath and path variables rather than trying to pick and choose what you need. I believe the 10g OCI driver is still dependent on an Oracle Net installation (which would be part of the Instant Client install, if required).
    BTW, last I knew (last year), Macromedia was discouraging the use of the OCI driver with Cold Fusion.
    Personally, I'm not aware of any significant benefits the OCI driver would provide a Cold Fusion installation. The only good reasons I've ever heard of for using the OCI driver are: to connect via IPC instead of TCP/IP (requires the database be running on the same server as the Java program), to use TAF, to use the OCI connection pooling for connection multiplexing, to take advantage of some slight performance gains with stored procedure calls. While not an expert in this area, I think only the first could possibly apply to use with Cold Fusion. The myth that OCI is substantially faster for standard SQL (non stored procedures) has been repeatedly debunked.

  • Driver problems for Konica Minolta 5430DL

    HELP required please!
    I Have bought the 5430 DL and have run into problems installing the latest drivers.
    Installing the driver for Leopard, I then found out that this was wrong, as it wasnt Leopard for intel Macs, just the older ones. I SHOULD have installed the 10.4 (intel) driver even though I have 10.5.
    With me so far?
    I have removed the 10.5 driver, but mu puter wont let me install the 10.4 driver cos it says I have newer drivers installed.
    It appears that some little b**r of a file is embedded somewhere and I havent removed it.
    Anyone tell me how I can find and remove said offending article, or tell me I am barking up the wrong tree, please?
    Konica have been very helpful ( apart from their driver information desription) but have gone as far as they can.
    Help required, please.
    Thanks a lot.
    Sallasboy

    Can you tell us why you think you have the wrong driver installed?

  • Iphone driver problem for itunes 64-bit

    I am having problems with the driver for my iphone to connect with my hp laptop, running on windows 7 home edtion. I recently installed the 64-bit version of itunes onto my laptop and then proceeded to update my iphone to the latest version aswell, since doing this i can no longer access my photo library on my phone and my computer keeps telling me that there is a device error- device not installed error cable unplugged? i dont no what to do i deleted the drivers (as there were 2 in the list) and then reinstalled but same error. It is really bugging me and has taken up my last 2 days of searching on the internet for answers. should i just forget the 64-bit itunes? ive read alot of people are having problems? please can someone help??

    Instead of having Apple Mobile Device USB Driver, i have a driver called MTP USB Device

  • JDBC Connection Driver Problem for Oracle in a J2EE servlet/class

    Hi,
    I am having a big problem with setting up a JDBC connection with my oracle database, I have been trying to fix it for about 6 hours now with no joy, I have read that many threads about JDBC, class paths etc.. that i dont know which way is up any more!!
    Here is the issue:
    (Please bare in mind that I am new to this when posting replies)
    I have a Web Application set up as a project in the netbeans IDE. I have a servlet which creates a new object call dbaseFunc which is a public class I have wrote and within this class is a function called getAppConfigCon(). The code for this function is below:
    public Connection getAppConfigCon()
    Connection con = null;
    try
    Class.forName("oracle.jdbc.driver.OracleDriver");
    con = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:xe","cavdev", "password");
    catch (SQLException e)
    e.printStackTrace();
    catch (ClassNotFoundException e)
    e.printStackTrace(System.out);
    return con;
    The database is Oracle XE and is installed on the same machine I am developing on, the database is up and I can connect to it via the netbeans IDE database interface after telling it where the driver is (C:\oracle\product\10.2.0\client_1\jdbc\lib\ojdbc14.zip). Obviously this is just IDE functionality and allows you to browse the database objects from netbeans however I now need to know how to tell the jre where the drivers are, right??
    Well like I said multiple forums led me down the classpath route and I have a system environment variable called CLASSPATH set up with the oracle jdbc driver specified as its value, when i run the set command from the command line ( I am running Windows XP Pro) I can see the class path entry in the output as follows:
    CLASSPATH=C:\oracle\product\10.2.0\client_1\jdbc\lib\ojdbc14.zip
    When I try to run my web app it doesnt assign the connection object with a value, i.e. when i was debugging my con object was null after calling the method mentioned above. After some time debugging i found a ClassNotFoundException was being thrown when the following command was executed:
    Class.forName("oracle.jdbc.driver.OracleDriver");
    Which I understand is because their is a problem with the class path but what is the problem??? The IDE likes the driver so why doesnt the jre.
    I am runnin jdk and jre 1.5, an Oracle XE Database using the netbeans environment.
    Some one please help me, I have spent far to much time on this rather than actually working on my project!!!!
    Thanks
    Keith

    Well After 10.5 hrs I actually sorted this myself, the two problems that were throwing me were this:
    1. Netbeans does not stop the tomcat server when it finishes running the app, you either have to stop the server from the menu or exit netbeans, until the server restarts it will not pick up on any driver files you add to common/lib
    2. You are very right Kiros tomcat does not do .zip files!!!!~~~###
    In order to sort this I had to add the oracle driver as a package to my project using the netbeans ide Project > Libraries > New Jar file, this allowed me to access the oracle classes. Then I had to set the server up to deal with the drivers as well, this meant adding the .jar file (not the latest .zip as it wont work) to the bundled tomcat common lib directory and restart the server via the ide (using the start/stop bat files in the tomcat conf directory doesnt work for some reason when its bundled with netbeans!)
    Thanks for the help guys but in the end it took 10 hrs a lot of reading and 2 bottles of lucozade to keep the brain goin.
    Keith

  • Oracle JDBC driver problem for Canada locale

    Hi, there:
    I have problem on Oracle JDBC thin driver with Canada locale on client side:
    I'm using Oracle9i thin jdbc driver, the nls parameters in oracle database is:
    NLS_LANGUAGE: AMERICAN
    NLS_TERRITORY: AMERICA
    NLS_NUMERIC_CHARACTERS : .,
    My java client side is running on Windows NT, which using jdbc thin driver to connect oracle database. If I set the locale in client side as "English(Canada)", it seems return me "French" number format, like ",45" (comma, instead of decimal point) for "0.45". However, If I set client side locale as "English(United States)", it returns me "0.45" as expected.
    So, my question: does Oracle JDBC driver always returns "French" number format evenif I set "English(Canada)" as locale? Because Canada have both English and French locale "French(Canada), and English(Canada)". How can I get "English" number format like "0.45" with "English(Canada)" locale setting?
    Really appreciated any reply, and thanks a lot in advance
    David

    Sounds like a question for Oracle Support to me.
    Anyway, the way to avoid the problem is to not ask Oracle to format numbers. Get the number directly (via ResultSet.getInt() or getDouble() or whatever) and ask Java to format it.

  • Bluetooth driver problem for N-8

    I am having N-8 with latest FW ,i cant pair with (IVT.BlueSoleil.v6.4.249.0) N-8 has bluetooth version 3 i think its not suiting for IVT.BlueSoleil,
    is there is any other blurtooth software like IVT.BlueSoleil ?
    i am using win 7

    hey people i solved this problem by installing the 
    ASUS P8P67(rev.3.0) Atheros AW_AR3011 Bluetooth Driver Package
    i hope it will help you
    http://www.download-source.de/1758412/ASUS-P8P67rev30-Atheros-AW-AR3011-Bluetooth-Driver-Package/

  • Audio driver problem for xp

    hi,
    iv downgraded frm vista to xp and the audio wnt work
    iv tried all sorts of sites from lenovo to ms to fix
    the problem but still no solution.everytime i try and
    install audio driver it keeps giving the message
    "HDA driver not installed" .......anysolutions anyone...
    my model is thincentrek200.

    I can give one answer to you problem ( the easiest way)
    1. Go to http://www.realtek.com.tw/ and find the drivers you need, almost all Lenovo products use RealTek
    2. Burn those drivers to a CD\DVD
    3. Delete all video and sound driver
    4. Reboot
    5. When the system ask if you have the drivers, answer yes
    6. Then give them the path where you downloaded the drivers
    That's the easy way, if that does not work for you let me know and I will guide you through the hard way. Let's hope the easy way works for you!

Maybe you are looking for