Driver(s) to print on HP Laserjet 4000n and HP Deskjet 722C printers for Windows 7 (64bit)

I'm introducing a Windows 7 64bit) computer in a network of Windows XP (32bit) computers.
How do I find driver(s) to print on HP Laserjet 4000n and HP Deskjet 722C printers in a network that uses Windows 7 (64bit) and Windows XP (32bit)? Printer sharing is done using a Windows XP (32bit) base computer.
Should I load a 64bit driver on the 32bit XP computer for the benefit of the Windows 7 computer or will that mess up the XP computer?
Thanks

Hello, the HP laser jet 4000n you install the drivers via windows update procedure. The HP 722C is not supported under Windows 7 due to it's age.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit

Dear
I need
HP laserjet 1200 series pcl5 driver for windows 7 64bit and windows 8.1 64bit
can anyone provide me ? no links to read text, direct solution is welcomed
thanks in all

Hi.
You may download the Universal Print Driver PCL5 below, it is compatible with both Windows 7 or 8 64-bit.
For USB select Plug n Play, for network select Tradiotional Mode and follow the steps by setting a TCP/IP Port with the IP Address of the printer:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=29790&spf_...
Please let me know of any issuesm
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

I'm installing windows 7 64-bit on my imac which I've done before but I get a message that the partition is GPT even after I format the bootcamp partition. I just upgraded my hard drive to a 3tb and I'm allocating 1tb for windows. How can I fix this?

No easy fix for a few reasons:
1) Bootcamp requires a hybrid MBR for the partition table. That is: both an MBR and a GPT partition table at the same time with the GPT one having all partitions and the MBR one having only the ones that are relevant, but at most 4 of them (including the protective partition and the Macintosh HD one). Which leads us to:
2) The MBR part of the hybrid partition table cannot work with 3TB hard drives. MBR is limited to 2TB.
I am working on a small EFI app that can boot Windows in EFI mode on a Mac and that would mean that you can go GPT only on your system. The progress of the app is slow due to the nature of EFI and for now requires that you do an unattended Windows install with slipstreamed graphics drivers, but we are adding VGA loading on top of EFI quite soon after the rest of the app stabilises. The status of the app is documented at:
Win7 x64 booting natively via EFI (no bios emulation)
Windows does actually successfully boot in EFI mode on most Macs (anything with a 64bit EFI should work), but does not have graphics support even if you load the driver due to the VGA pci registers not being set by the firmware. Furthermore, in Setup and Safe Mode, Windows uses VGA instead of GOP which is a failure by design since VGA is a BIOS standard and not really compatible without hacks with EFI. Other EFI implementations also add VGA compatibility at a high cost to the firmware complexity for the VGA cards available on the market that don't actually contain anything in their ROM except the VGA BIOS.
My recomendations:
1) Install on a second smaller hard-drive; or
2) Wait for the EFI app to come out officially and use that to boot Windows Vista SP1 x64 and Windows 7 x64 (RTM and SP1) in the native EFI mode.
3) Wait for Windows 8 which supports VGA-less booting acording to the AMD presentation at UEFI Plugfest.

I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions. Can you tell me how please?

I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions. Can you tell me how please?
I see an upgrade path from Safari but don't want to change that and would like to be able boot from Maverick when needed.
Is this possible and how?
Thank you!

On the Apple site I see an upgrade path but not from scratch. I will use my current systems and then it place a complete install of Maverick on the other drive to boot from?
Thank you!

Satellite P100-426 - What sound driver I need for Windows 7 64bit?

Hello,
I have installed Windows 7 64bit to my P100-426. It was no problem but I can't foud a driver for the sound chip and I also don't know wich sound chip is on board.
Maybe someone can help me.
thank's a lot.
sven_lee

Hey,
The problem is hat neither for Windows Vista 64bit or Windows 7 64bit are drivers available for your notebook model. I have checked this on official Toshiba website:
http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
According the Toshiba page your notebook has Conexant sound chip
But Conexant doesnt provide drivers directly so you have to check the Toshiba website again
I found out that Satellite P300 has also Conexant sound card and there is a driver for Windows 7 64bit available. In my opinion you should try the sound driver from Satellite P300. Theoretically this should work. ;)

Hp Laserjet 1015 Printer Driver for Windows 8 64bit

I am Using Windows 8 64bit in my laptop. I want to Connect my laptop with Hp Laserjet 1015 printer.It is a Network printer and I am unable to found a sutable Driver for my laptop. I'm badly In need of the driver.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I did find the a document on how to install the printer on Win 8.
HP LaserJet .
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Driver Require or HP laserjet 1015 PCL Printers for Windows 8.1 64 Bit

Dear Sir,
I Working at PGVCL (Leading Electricity Distribution COmpany o Gujarat (India) ) having many HP printers Laserjet 1015 PCL. Now, recently our company upgrade our computer system with OS of Windows 8.1(64 bit),now trouble of printing start. No any above printers install in PC, due to non availibility of that Drivers. I checked HP websites for that Drivers. but our requirements driver not available in it. Finaly many printers of HP become unusable for us.
So, you are kindly requested to please provide Drives of Printers for HP LaserJet 1015 PCL for Windows 8.1 (64 Bit) or provide guideline ti install it in our PC. So, we can use HP Printers in our work place.
Regards:
Mr. Pranjal [Personal Information Removed]
[Personal Information Removed]
Contact No. [Personal Information Removed]

My Windows 8.1 Professional 64-bit system has a built-in driver for the LaserJet 1015 model:
You may have to click the Windows Update button in the Add Printer dialogue, then wait (perhaps for several minutes) whilst additional drivers are downloaded, before the list is repopulated.

Can not Print with HP LaserJet 5000 and Epson AcuLaser C9100

I am using MacBook Pro 2.3 GHz Intel Core i7 with Mac OS X (10.6.6)
I already install the latest print driver from the Apple Software Update website.
The driver for HP is Ver. 17.5 & for Epson is Ver. 5.2
I connect two of the printer to my Belkin Surf N300 wireless N Router with ethernet cable.
The error when print to HP LaserJet 5000 is as follow:-
Unable to get printer status (Not Implemented)!
Network host 'x.x.x.x' is busy; will retry in 30 seconds...
This error can stay forever if I do not delete the print job
The error when print to Epson AcuLaser C9100 is as follow:-
Printer not responding
This error can stay forever if I do not delete the print job
Previously I can print with my emac with OS X 10.4.10, but now I can not print with 2 of my printer.
My 2 printer are in good condition, so this is not the printer problem.
Please, do anyone know how to fix this problem fast, because I need to use this two printer for my business.
Thanks in advance.

That is not what Greg needs to know. That is just the way that the IP addresses are assigned to the printers.
Your problem is probably that the printers were probably originally found by AppleTalk. AppleTalk is not included in Snow Leopard. If the printers support Bonjour, they should be found that way. Otherwise, you have to use other methods.
How did you add your printers on the new computer? If you delete them from Print & Fax, how would you add them again?

I need help printing with HP laserjet 2200 and OS 10.6

I need help setting up my HP laserjet 2200 and OS 10.6 -- I've downloaded and installed all the software and still can't print.

Hey jeo1951,
If you haven't already, try running through the recommended steps in the following article:
Mac 101: Printing (Mac OS X v10.6)
http://support.apple.com/kb/HT3771
It should help you set up your printer.
Welcome to Apple Support Communities!
All the best,
Delgadoh

Laserjet 4200 drivers for Windows 7 64bit

ok...ive upgraded to Windows 7 64bit to test on our network and come to find HP is lacking on the drivers for my laserjet!!!
I need a solution for this.
thank you

In Windows 7 Prof 64 bit I got my HP 4200DTN to work kind of. In Windows install a network printer, have it look for the driver in Windows 7 prof 64 bit. Now with that said it will make it print, duplex BUT if you have an envelope feeder like I do you are SOL, THANKS TO HP. Their solutions is to buy one of their cheap Chinese printers. I will not do that because the HP 4200DTN will print and does a good job in my network. Before I buy one of their cheap Chinese piece of crap I will get rid of Windows. Still trying to find a work around. The HP printer driver web page has a Universal Printer Driver for the HP 4200 but a lot of features are not supported. Tray 1 envelope feeder ( no support ) you can take the feeder off and feed tray 1 by hand to print envelopes HANDY!!! Just like starting your car with a crank!!! Would not hurt HP to provide drivers for the HP4200DTN, with the envelope feeder. They are so busy trying to SELL, SELL, SELL the new Chinese cheap crap. HP had a problem with their DeskJets in the 90's, paper feed rollers and gears broke. They talked me into a HP 8600Pro Premium, going to send it back. I am going to try my hand at fixing my HP OfficeJet 7310 All-In-One that quit working. It has been a good printer since purchase 6 years ago. I puchased a parts machine today. With any kind of luck I will have the needed parts to make my HP 7310 live. Don't need their cheap Chinese Junk. They don't want to have the service they used to provide. Spend all day on the phone and get transfered all over the world and back again, no help. Sick of it!

Hp LaserJet 1005: drivers for Windows 7 64bits

Hi,
I recently reinstalled my windows 7 x64 Bit operating system. I tried again installing my LaserJet 1005 (not M1005), but it's not possible. I tried everything but I am not able to install the printer. Its very frustrating since I spent so much for the printer and windows 7 only to find they are not compatible. Please help.

Hi,
Since Laserjet 1005 is a old product the drivers are not available, refer link below for more options.
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/mostViewedDisplay/?sp4ts.oid=240...
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution"

Toshiba E-studio 200s driver for Windows 7 64bit

I have printer/scenner /fax e-studio 200s , but there is no driver for my new Windows 7 64bit. I`m searching on Toshiba web site, but no results
Can you help me ?

This driver was very hard to find. I have the 200s e studio but the installation cd was lost. it was almost impossible to find this driver, but finally I managed to stumble upon it. So I want to help you all you seekers.
Here is the download link.
http://www.eid.toshiba.com.au/n_driver_es162025.asp
Thanks
+Message was edited: dead link has been replaced+

X-fi elite Pro Driver for Windows 7 64bit

)X-fi elite Pro Driver for Windows 7 64bitH Hi all
I've read in the past and toady some topics about the x-fi drivers and windows 7.
Due to the fact, that I want to install win7 64bit in the next few days, i just want to know which drivers I should use for my Elite Pro.
Currently I'm using XP and got no problems with the drivers yet, everything could be installed with the cd from my elite pro package.
So as far as I understood the topics correct, there are 3 option which drivers i could use:
. Orignal Creative windows 7 driver
2. Daniel_k support pack
3. Pax drivers
Can anyone tell me the advantages or disadvantages of these drivers? Important for me are the "gaming" utilities and THX for my 7. Teufel system.
Which dirvers should i use and work without problems?

- i have? windows 7? 64 bit
? and having trouble with an older version
? SOUNDBLASTER AUDIGY PLATINUM ex
? i cannot get it to open mixers, or other Audigy functions.
? even with downloading Windows 7 driver from Creative.
? doug barron? 902 425 8836

Looking for AMD AHCI storage driver for Windows 7 64bit

I plan to downgrade Notebook 15-F009VM with AMD E1-2100 processor to Windows 7 64 bit. It looks like it has an AMD AHCI storage controller. Can anyone direct me to the driver so that I can load the Windows 7 OS on the system?

Hi:
It seems that several folks are unable to find the right driver.
All I can tell you is that you can try the drivers in the Packages folder from the chipset driver at the link below. First driver on the list.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
You can use a free file utility like 7-zip to extract the file folders from the exe file vice running it.
http://7-zip.org/

Re: Satellite P200-1FJ - LAN driver for Windows 7 64bit

Can anybody help me for LAN driver for Satellite P200-1FJ? I have Windows 7 64bit, when I ask for this driver in toshiba site, reed "Sorry we couldn't find any drivers matching your search criteria. "

Hi legiadb,
The drivers you can download here:
http://eu.computers.toshiba-europe.com > Support & Downloads > Download Drivers
As you probably already saw, no Windows 7 64bit driver is available so I would recommend testing the Vista 64bit driver.
Does it work on Windows 7?
Alternative check the Realtek page directly ;)

Driver(s) to print on HP Laserjet 4000n and HP Deskjet 722C printers for Windows 7 (64bit)

Similar Messages

Maybe you are looking for