"Driver transmit queue stuck" Error - what does it mean?

My 1231G Cisco on 12.3(7)JA2 is giving me the Critical error message: "Interface Dot11Radio0, failed - Driver transmit queue stuck," I have never seen this before. What does it mean, and can it be resolved? Thanks!

This error means the AP had an radio failure and if had one then it should disconnect the clients at that point. Try upgrading the firmware to the latest. This will resolve this issue.

Similar Messages

Cannot upload music says I O error what does this mean?

When uploading tracks says high res best wav or aiff when track is chosen to upload says I O error what does this mean?Tried all types of files same thing!!
== URL of affected sites ==
http://www.jinglepunks.com

connect it to your computer and open iTunes

HT201257 mac os x 10.4.11 tiger: apple hardware test has detected an error (what does this mean): 4SNS/1/40000001:VDOR

Can someone help? I did an apple hardware test and it has detected an error: 4SNS/1/40000001:VDOR
What does that mean? Can i correct it myself? how?
my computer is "tiger" mac os x 10.4.11, Processor: 2.16 GHz Intel Core 2 Duo, Memory: 2.5 Go 667 MHz DDR2 SDRAM

Thank's for answering, realy appreciate your time,
A technician had installed last year "mac os x snow leopard 10.6" (family pack) at around $49.00 - I had originaly mac os x 10.4.11 (tiger). He had changed my hard drive, added memory: 2.5 Go 667 MHz DDR2 SDRAM, processor is: 2.16 GHz Intel Core 2 Duo (he told me he had to change my hard drive probably due to a power shortage. Before he did the changes, I had done a hardware test: it gave me the same error as today 4SNS/1/40000001:DVOR, He cleaned the inside, but he did not change any sensors. What am i to do???
Not too long ago i started having problems. (probably from a power shortage, at one point. I don't know if my external back up got corrupt. so i don't want to use it. He had eraced tiger 10.4.11 and installed snow leopard 10.6.
I eraced snow leopard and installed mac os x 10.4.11 (that came with my computer).
I wanted to install mac os x 10.6 (snow Leopard) without eracing tiger (chat sites say you can do that) but it said it couldn't use my hard disk because of my memory: my info says: used: 18,78 Go on the disk, available: 446.66 Go, Capacity: 465,44 Go
So that's when i did a hardware test with the CD1 of mac os x 10.4 (tiger) and that where i got the message.
If i have a sensor problem, then i guess i'm waisting my time trying to reinstall mac os x 10.6 (snow Leopard) or am i doing it wrong. I was told i could leave tiger there and upgrade directly to snow leopard, without installing mac os x 10.5 (leopard).
Thank again

Trying to download iOS7 and it is saying i have a setting error what does that mean

trying to download iOS7 and it is saying i have a setting error what does that mean

Quite probably, or it may just be off and out of range of a network. In order to find a missing iOS device it has to have had the app enabled, and be on, not wiped, and able to connect to a network.

This appears under my hard drive icon"]]]]]]]]]..]]]]]]]]". What does this mean?

These brackets appear under my hard drive icon on my desk top...."]]]]]]]]..]]]]]]]]]]" what does this mean? Can anyone help please?

It just mean's it the name of your hard drive. Just click once on the hard drive to highlight it then press your return key then type Macintosh HD.

When trying to save a document , it says syntax error-what does that mean and how do I fix it?

when trying to save a document that I typed, it says syntax error..what does that mean and how do I fix it so I can save my documents?

Applescript is like HTML, Actionscript, or Javascript.
SYNTAX is EVERYTHING.
Unlike HTML, Dreamweaver will pop a syntax error when trying to save a javascript that is unworkable because of a Syntax Error. Flash will do the same with a bad Actionscript.
AppleScript Editor is the same way as Dreamweaver or Flash.
The reason is:
Bad HTML - a browser simply won't load the page or it'll load it with missing or no content. Not all that bad.
Bad Javascript - your browser can lock up and if the script is complex enough, it can lock up your entire system.
Bad Actionscript - just like bad javascript, it can potentially lock your entire system.
Bad Applescript - can lock up your entire system.
With Windows, viruses are often improperly read as SYNTAX errors in Actionscript or Javascript. That's not a worry with an AppleScript, but the possibility of locking up your system is worth a warning.
You need to double check your syntax to be sure you haven't got something missing or improperly written.

HT201210 (-1) error what does it mean i didi everything the guide said with no success

error (-1) what does it mean

heisetax,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HT1338 4sns/1/40000001:tbit-0.000 hardware error - what does it mean?

What does this hardware error mean?

Hello, is the Battery removed from your MacBook?
https://discussions.apple.com/thread/1791371?start=0&tstart=0

Adobe Reader problem message; 'internal server error'; what does this mean?

My update didn't take so I uninstalled the Reader and installed it again. This is the error message I bgot after the installation:
Internal Server Error
The server encountered an error while processing this request:
{error,{case_clause,{undefined,undefined,undefined}}, [{ox_user,determine_user_id,2,[{file,"ox_user.erl"},{line,467}]}, {lists,foldl,3,[{file,"lists.erl"},{line,1248}]}, {ox_user,ensure_user_info,2,[{file,"ox_user.erl"},{line,25}]}, {webmachine_resource,resource_call,3, [{file,"src/webmachine_resource.erl"}, {line,186}]}, {webmachine_resource,do,3, [{file,"src/webmachine_resource.erl"}, {line,142}]}, {webmachine_decision_core,resource_call,1, [{file,"src/webmachine_decision_core.erl"}, {line,48}]}, {webmachine_decision_core,decision,1, [{file,"src/webmachine_decision_core.erl"}, {line,162}]}, {webmachine_decision_core,handle_request,2, [{file,"src/webmachine_decision_co
any suggestions as to what the problem is

What is your operating system? Browser? Reader version?
You get this error when doing what?

FF81 -65504 PRINTER ERROR What does it mean.

My printer is a: LaserJet 4515
My operating system is Mac OS 10.6.8, 10.7.6, &/or 10.8.2
Error message: FF81 -65504 PRINTER ERROR
No computer system changes
This error came up while printing an envelop from storage on the printer's hard drive. The printer gave the above error code. It told me to turn the printer off & then back on. That did not help. The printer manual says tha a the FF81 error code is a firmware error. At this point I did the following:
1 - checked the ethernet cable that did no good.
2 - I took out the hard drive. That fixed the problem.
3 - Replaced the EIO hard drive card with one from my HP LaserJet 8150 printer. Printer still works.
4 - I have taken the 80 GB PATA drive off of the small card that it is on.
5 - I want to replace this hard drive with one that I know is good.
6- Changing the hard drive is easy, but ... That is my question.
7 - If I change the hard drive how is it formatted?
8 - Does HP use a propritary hard drive formatting or does it use a Windows format like Fat32 or other format?
9 - I don't want to pay $500 - 700 for a new card & drive. The drive now in use is only worth $25 when working.
10 - What are your ideas? I want to put the hard drive back into my HP LJ 8150.

heisetax,
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/ .
I hope this helps.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Invalid Node Error: What does this mean?

I have a white Macbook I purchased in September of last year, so the hardware warranty is still active. I did not purchase any extended care warranty, but am considering it now...
This past Monday, I was using my computer at one work site, then had to go to another. I shut it down, and when I got to my next destination (roughly 15 minutes later) I tried to power it up. I got the gray screen with the apple, the little wheel spinning below it, and after about two minutes of that, it shut down. That's all it has done since. It was working perfectly until then, as far as I could tell.
I have tried resetting the PRAM, taking out the battery and holding the power button down, running a hardware check, and booting from the installation disk. The hardware check said it detected no problems, but the disk utility consistently finds an Invalid Node error, and can't repair the disk. I can't verify either, for the same reasons.
Of course, I have nothing backed up. I would like to recover my data if possible, but I'd rather have a working computer with everything lost than neither. I have an appointment at a Genius Bar for tomorrow, but was wondering if anyone had any suggestions as to what this might be.
I appreciate any help!

Disk Warrior can repair the invalid node problem if it's not extensive. However, if DW is unable to repair the disk, then reformatting would be your only other option.
If you have a backup clone from which you can boot the computer then you can update the backup of your data files before reformatting the drive. If you don't have a backup (which you should,) then the following would be an option:
If you have access to another Mac with FireWire, then you can use Target Disk Mode to access the drive and backup your data files, provided the drive is accessible.

-39 error, what does this mean, how do I fix it?

I try and download a game from the iTunes store and I get this error message "There was a problem download ######. An unknown error occured -39." How do I fix this, I am using the Windows Vista platform.

This is a not uncommon problem when uninstalling iTunes and other Apple programs. It also occurs when updating because Apple uninstalls the previous version before applying an update.
There is a Microsoft "Fix it" solution for programs that won't uninstall correctly found at http://support.microsoft.com/mats/Program_Install_and_Uninstall. It can bypass the network resource unavailable error. It is well written but may take several minutes (I have seen 20-30) to uninstall the app. When the utility finishes successfully the app is uninstalled and, if desired, you can try the software update again.
This solution is a replacement for the older Windows Installer CleanUp utility (msicuu2.exe). Microsoft retired the CleanUp utility because it can cause problems with other programs installed by the Microsoft Windows Installer. If you see suggestions that direct you to download the older utility, please try this Fix it solution before doing so. Downloading programs from unknown sources can be risky.

View access denied to Subject on a Rule error: - what does it mean?

I get this red error message when I attempt to validate a field on a form.
I am logged in as mailadmin and I am using his default form. When I edit and save a user, I want to ensure that the mail username is unique.
I wrote a rule which compares the username entered on the form against all present IdM accountIds (queriable attribute 'name'). The rule has a <RunAsUser> section and the rule runs as id 'Configurator'
What is the trick here to allow mailadmin View access?
I want an admin (not Configurator) to be able to list all IdM objects so I can apply the Attribute condition startswith for all present IdM accountIds. I believe it should be possible.
Any hints gratefully accepted

I've had problems with a rule that was unaccessible to end users. here is what I had to change in the rule :
<Rule authType='EndUserRule'
<ObjectRef type='ObjectGroup' id='#ID#All' name='All'/>
now it works

Loadjava error what does it mean?urgently please

Hi,my problem is that :
C:\TEMP>loadjava -u sys/sys -o -r -v -noverify -synonym -g public mail.zip
arguments: '-u' 'sys/sys' '-o' '-r' '-v' '-noverify' '-synonym' '-g' 'public' 'm
ail.zip'
Exception in thread "main" java.lang.UnsatisfiedLinkError: t2cParseExecuteDescri
be
at oracle.jdbc.driver.T2CStatement.t2cParseExecuteDescribe(Native Method
when ı wrote -u sys/sys instead of sys/sys@orcl this error occured why ?
thanks!

Hello,
Is this related to the same issue you're having here -
Re: urgent help about javaload command
when ı wrote -u sys/sys instead of sys/sys@orcl this error occured why ?Are you saying that when you specify sys/sys@orcl it works ok?

ADE 3.0: E_ACT_NOT_READY error - what does it mean?

Hi knowledgable and helpful Adobe forum people,
I'm getting an E_ACT_NOT_READY error when trying to open an ebook I just purchased and downloaded.
Backround:
I've had an Adobe ID for several years and bought several Adobe ebooks from various retailers and generally access the ebooks on desktop (I know - wierd), I just got a new MacBook and want to move some books across, and buy some new ones.
What happened:
- I installed ADE 3.0 on my new MacBook (I didn't get a prompt to authorise my computer and there doesn't seem to be an option in the menu to do this retrospectively)
- I've paid for and downloaded an ebook in the form of a 1KB ASCM file
- I go to open the ASCM file
- I get an E_ACT_NOT_READY error when attempting to open the new ebook I just downloaded, as well as other ebooks I have in my library:
Questions:
- Is anyone else getting this error?
- Has anyone found a solution / workaround?
This is REALLY frustrating - any assistance from Adobe or anyone on what might be causing this much appreciated.
Thanks in advance.

Please try the steps mentioned in the following link:
http://helpx.adobe.com/digital-editions/kb/error-e_act_not_ready.html
It should fix the issue.

"Driver transmit queue stuck" Error - what does it mean?

Similar Messages

Maybe you are looking for