Driver update configuration error

When i try to update my driver software for my iphone when registering to a non apple computer, it says that one of the drivers for my device cannot be installed. when i go into properties it says my device is not configured correctly so i cannot update my driver. how do i reconfigure my device?

try reinstalling itunes. or change the usb port.
and use 2.0 usb instead of 3.0

Similar Messages

Software updater configuration error

Hope somebody can help...
I tried to update my N95's firmware via the Nokia Software Updater.
It was downloading the file (about 135mb) just fine when an error occured after it downloaded around 80mb . I did not make note of the error unfortunately. Now when starting the NSU, the starting screen appears and idles for about 2 minutes. The updater will not start up and comes back with an message saying: "configuration error"
I have tried to uninstal and re-instal, uninstal and deleting remaining folders that are left behind but no luck. I also tried the port scanning thingy that Nokia suggested but could not find only closed ports on IP Address 127.0.0.1 between 62700-62750.
So the odd thing is that it worked fine at first and now won't even startup, No firewall settings were changed.
I would appreciate any suggestions
I run windows Vista home premium.
Thanks

Willowy wrote:
I know it's been a while, but I found another way to solve the annoying "configuration error" and I'd leave it here for someone else. Nokia tells you to turn off the Internet File Sharing in the FAQ of the NSU. Here it didn't work. So I decided if it is a network problem than I'd turn off the ICS. It worked and I didn't have to turn off any of my security software (firewall and antivirus). So.
Start menu > Execute (or use the Search box in the start menu of Windows Vista) > Services > Find ICS in the list of services > Right mouse > Stop. Now NSU will find the new firmware.
Please turn on the ICS again after you finish the update.
Thanks man! This has been my problem for such a long time!

Configuration Error when I try to update software

Hi
I have an X6-16mb and I am running Windows 7. I have the latest version of Nokia Software Updater v2.5.2 but every time I try to update I get a "Configuration Error". What is this likely to be please?

a screenshot would be helpful,
anyways Turn off firewall and antivirus. and close Ovi suite (If u have installed) before launching NSU.
/t5/PC-and-Mac-Software/Software-updater-configuration-error/m-p/552098#M38622
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Windows 8.1 Update 1 error :0x80070002 for Inf: usbxhci.inf

Hello. I am using the offline Windows 8.1 Update 1 Windows8.1-KB2919355-x64.msu on a computer running Windows 8.1 X64 Enterprise ( did an implace upgrade from Windows 8 to 8.1 last fall)
The update KB2919355 fails during Reboot phase of the patch, Installing update 0% then system reboots.
The CBS log file shows the following error : 2014-04-14 14:20:01, Info CBS Doqe: Recording result: 0x80070002, for Inf: usbxhci.inf
After this occurs he CBS log file just indicates a reboot.
2014-04-14 14:20:00, Info CBS Doqe: [Forward] Staging driver updates, Count 31
2014-04-14 14:20:00, Info CBS STAGE index: 27, phase: 1, result 0, inf: miradisp.inf
2014-04-14 14:20:00, Info CBS STAGE index: 28, phase: 1, result 0, inf: mgtdyn.inf
2014-04-14 14:20:00, Info CBS STAGE index: 29, phase: 1, result 0, inf: idtsec.inf
2014-04-14 14:20:00, Info CBS STAGE index: 0, phase: 1, result 0, inf: mf.inf
2014-04-14 14:20:00, Info CBS Shtd: Changing shutdown timeout to a sliding window timeout: 900000
2014-04-14 14:20:00, Info CBS Progress: UI message updated. Operation type: Update. Stage: 1 out of 1. Percent progress: 0.
2014-04-14 14:20:01, Info CBS STAGE index: 1, phase: 1, result 2, inf: usbxhci.inf
2014-04-14 14:20:01, Info CBS Doqe: Recording result: 0x80070002, for Inf: usbxhci.inf
2014-04-14 14:20:01, Info CBS DriverUpdateStageUpdates failed [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-04-14 14:20:01, Error CBS Doqe: Failed staging driver updates [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-04-14 14:20:01, Info CBS Perf: Doqe: Staging ended.
2014-04-14 14:20:01, Error CBS Failed staging drivers, rebooting and trying again [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
I don't recall installing any 3rd parth USB drivers and this comptuer is an older Lenovo ThinkCenter that only has USB 2 ports.
I used devcon driverfiles * > hardware.txt to export all of the hardware and driver files in use on my system and did not find any reference to
usbxhci.inf
Any suggestions ?
Naim

Thank you for the link.
I tried the windows upate repair but that did not fix the issue. I also manualy run the sfc /scannow and now errors were found
I found that the driver updates are logged in file setupapi.dev.log, Where I can see more errors that relate to usbxhci.inf, this occurs at the same time as the cbs.log errors.
sto: {Stage Driver Package: C:\WINDOWS\WinSxS\amd64_usbxhci.inf_31bf3856ad364e35_6.3.9600.17031_none_1122457cd237accf\usbxhci.inf} 14:20:45.054
inf: {Query Configurability: C:\WINDOWS\WinSxS\amd64_usbxhci.inf_31bf3856ad364e35_6.3.9600.17031_none_1122457cd237accf\usbxhci.inf} 14:20:45.257
inf: Driver package 'usbxhci.inf' is configurable.
inf: {Query Configurability: exit(0x00000000)} 14:20:45.445
sto: {DRIVERSTORE IMPORT BEGIN} 14:20:45.445
sto: {DRIVERSTORE IMPORT BEGIN: exit(0x00000000)} 14:20:45.445
flq: Hardlinking 'C:\WINDOWS\WinSxS\amd64_usbxhci.inf_31bf3856ad364e35_6.3.9600.17031_none_1122457cd237accf\usbxhci.inf' to 'C:\WINDOWS\System32\DriverStore\FileRepository\usbxhci.inf_amd64_60b784e1a62d9ad9\usbxhci.inf'.
flq: Hardlinking 'C:\WINDOWS\WinSxS\amd64_usbxhci.inf_31bf3856ad364e35_6.3.9600.17031_none_1122457cd237accf\USBXHCI.SYS' to 'C:\WINDOWS\System32\DriverStore\FileRepository\usbxhci.inf_amd64_60b784e1a62d9ad9\USBXHCI.SYS'.
flq: Hardlinking 'C:\WINDOWS\WinSxS\amd64_usbxhci.inf_31bf3856ad364e35_6.3.9600.17031_none_1122457cd237accf\UCX01000.SYS' to 'C:\WINDOWS\System32\DriverStore\FileRepository\usbxhci.inf_amd64_60b784e1a62d9ad9\UCX01000.SYS'.
idb: {Register Driver Package: C:\WINDOWS\System32\DriverStore\FileRepository\usbxhci.inf_amd64_60b784e1a62d9ad9\usbxhci.inf} 14:20:45.460
idb: Created driver package object 'usbxhci.inf_amd64_60b784e1a62d9ad9' in SYSTEM database node.
!!! idb: Failed to query processor architecture for 'usbxhci.inf_amd64_3f3240b34354ef29'. Error = 0x00000002
!!! idb: Failed to register driver package 'usbxhci.inf_amd64_60b784e1a62d9ad9' against 'usbxhci.inf'. Error = 0x00000002
!!! idb: Failed to register driver package 'C:\WINDOWS\System32\DriverStore\FileRepository\usbxhci.inf_amd64_60b784e1a62d9ad9\usbxhci.inf'. Error = 0x00000002
idb: {Register Driver Package: exit(0x00000002)} 14:20:45.460
sto: {DRIVERSTORE IMPORT END} 14:20:45.460
sto: {DRIVERSTORE IMPORT END: exit(0x00000002)} 14:20:45.460
sto: Rolled back driver package import.
!!! sto: Failed to import driver package into Driver Store. Error = 0x00000002
sto: {Stage Driver Package: exit(0x00000002)} 14:20:45.460
!!! sto: Failed to stage all driver updates. Error = 0x00000002

What can I do about driver updates that will not install because of an "unknown error".

I have an HP p6530 Pavilion that is taking a while to startup. Not real long but longer then it should. I tried to install driver updates from Intel for the Chipset and RAID but when I download and install it will not finish the install because of an "unknown error" and then setup exits. I could really use advice from anyone that can help.

Have you tried to disable your virus protection and any running programs in the system tray? Turn off any programs that are not necessary before you run the updates. Make sure you run the updates as administrator (right click on the driver install program and click on run as administrator).
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Email driver configuration error

Hi
I am trying to send Email notification through BPEL.
I have cofigured my Email driver in enterprise manager
But I am unable to send a email
the error reported by UMS log says
Overall Status     failed
Status Code     DELIVERY_TO_GATEWAY_FAILURE
Status Message     javax.mail.AuthenticationFailedException
any pointers ??
Thanks in advance
Aditya Kaulgud

<Apr 29, 2011 11:30:01 AM GMT+05:30> <Error> <oracle.soa.services.notification>
<BEA-000000> <<.> Error while sending notification.
Error while sending notification to 'email:******@*******.net; 9fd7a440ac11ccf
10139c6df3ddb3d9a'.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used
; Email server/Messaging gateway is down; using IP address as part of email ID
instead of domain name;.
ORABPEL-31015
Error while sending notification.
Error while sending notification to 'email:******@*******.net; 9fd7a440ac11ccf
10139c6df3ddb3d9a'.
Possible causes : SDPMessaging Driver not configured; Invalid To Address is used
; Email server/Messaging gateway is down; using IP address as part of email ID
instead of domain name;.
at oracle.bpel.services.notification.impl.asns.ASNSDriver.onStatus(ASNSD
river.java:680)
at oracle.bpel.services.notification.impl.asns.ASNSInteractionBean.onSta
tus(ASNSInteractionBean.java:235)
at oracle.bpel.services.notification.impl.asns.ASNSInteraction_rwgsr4_EL
OImpl.onStatus(ASNSInteraction_rwgsr4_ELOImpl.java:126)
at oracle.sdpinternal.messaging.MessageDispatcherBean.dispatchStatus(Mes
sageDispatcherBean.java:332)
at oracle.sdpinternal.messaging.MessageDispatcherBean.onMessage(MessageD
ispatcherBean.java:247)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:46
6)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDL
istener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:
327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:517
0)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTunin
gWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
Edited by: 855320 on Apr 28, 2011 11:06 PM

I am trying to install SC6 Photoshop and Bridge on a new Mac laptop. Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive. I get a message: Configuration error. Peas

I am trying to install SC6 Photoshop and Bridge on a new Mac laptop. Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive. I get a message: Configuration error. Please uninstall and reintall... Error 16

Hi midtone,
Is it possible to download the product? It seems that copying didn't work.
If you can download then please use this link: Download CS6 products
-Ankit

Mac, keep getting configuration error 1 when trying to open files re-installed from external drive

I recently had to do a clean install of my computer and tried to run my Adobe applications after installing them from a hard drive backup. It keeps giving me Configuration Error 1. I tried to take a different route and use my serial number to activate Adobe Acrobat X Pro and my serial number will not work to activate the free download.
I downloaded a university copy of Adobe Creative Suite Design Premium CS5.5 in September 2011.

http://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
Mylenium

Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

Help! Installing updates an error occurred now my MacBook Pro will not restart. "Unable to find driver for this platform"

Did you try more than once? If so:
Reinstall Lion, Mountain Lion, or Mavericks without erasing drive
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu.
Reinstall Mountain Lion or Mavericks
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Boot Camp driver update error

I keep getting Error code 1603 whenever I try to install the boot camp driver update under Windows Vista, it says something about a restart pending in the event log but I've restarted twice and it hasn't changed a thing, is there any way to fix this?

right click on my computer, go to manage, then to device manager.
Under display adapters, remove everything, may ask to reboot, try rebooting or just run installer again.
This fixed it for me, i tried so many things before i found this fix.

Driver Update Error

Did a clean install of XP Pro last week. This morning, I updated the driver for my XF-I card to ver 2-8.0008. When I rebooted I got a Fatal Error box pop up, RegOpenKeyEx() Failed. It looks like it is tied to the Vol Control Panel.exe. I went to the Creative menu in the Start up menu and clicked the Volune Control Panel Icon and an error popped up saying"Failed to load". The Vol Panel icon was in my system tray before the driver update but not now. Any fixes for this issue other than uninstalling and reinstalling the XF-I CD software? Thanks.

? A little background on what caused this mess in the first place. I have an aircraft add-on which required a newer sound driver than the one that was on my X-Fi CD. I downloaded the latest driver from Creative ver 2-8_003 and installed it after removing the older first in the Device Manager. When I rebooted, that is when I got the Vol Control Panel error. Also, the Creative Console Launcher wouldn't launch. I figured it might be a corrupt driver download.
So, I went back into the Device Manager and deleted the driver I had just installed. Then I uninstalled the Soundblaster X-Fi program in the Add/Remove Program. I then inserted my X-Fi CD and did a Custom Install choosing what applications that I wanted to install (minus the Driver).
After that was done I installed a previous driver I had saved ver 2-8_008. Rebooted and all applications worked correctly. Hope this makes sense.

Proliant ML310e G8 boot error, boot logical drive is configured but missing or offline

Following a power outage the server will no longer boot up. During bootup  I get the following...
HP Dyanamic Smart Array B120i RAID Controller (v3.06.0m 0MB) 0 Logical Volume
1785-Drive Array Not Configured
    Run Array Configuration Utility
Press <F5> to run HP Array Configuration Utility (ACU)
Press <ESC> to skip
    **** Boot Logical Drive s configured but is Missing or Offline.
In ACU it shows 930GB available on the 1TB drive. There are few article I found that mention going into F8 boot option and nothing fits in with the options available.
for example these
   1. start the computer and wait till you see; "Press F8 to run option ROM configuration for Array utility"
   2. Press F8, you will see the Main Menu, Select the last option "Select Boot Volume"
   3. Select in Direct attached storage,
   4. if you see first logicar drive 01 select it .
   5. Press F8 To save Logical Drive 01 as Boot Volume.
   6. Press F8 to Exit and start with New Boot Volume.
I did find the following advisory but the controller isnt in the ones listed under Scope.
http://h20565.www2.hp.com/hpsc/doc/public/display?sp4ts.oid=5177937&docId=emr_na-c04081865&docLocale...
Also as I mentioned, viewing the ACU screens refer to createing array and creating logicl volumes, no mention of setting boot order. And going the the steps of creating the array and logical volumes seem it will wipe the data.
Thank you in advance.
Regards
S.

Hi:
You may also want to post your question on the HP business support forum -- ML Servers section.
http://h30499.www3.hp.com/t5/ProLiant-Servers-ML-DL-SL/bd-p/itrc-264#.VNd3snk5C9I

Start up error and beats audio crackling after realtech driver update

I am having several issues.
If I plug in a external hard drive, the OS will not start and goes to "press esc for start up menu" in lower left corner on a black screen. I press esc and it goes to boot options. I have done what HP states and hard started my computer twice and it did not help, and I have found no other suggestion to try and fix this. I have tried everything, including a system recovery and it still goes to the start up menu options. If I disconnect the external, it will still appear, but the operating system will start up after a few seconds. Why do I have to disconnect my external to start OS. And for some reason, my external has been seated in the hardrive section of my computer, instead of the removable storage devices in my computer.
Also, after updating realtech driver, my beats audio speakers pops and cracks. I tried to roll back driver, but no changes. Please help. I dont want to go thru the trouble of sending my computer back for repair. This is really upsetting!!!! I cannot play any videos or music, because of the crackling. Why did it do that, and is it fixable. My laptop has not been jarred or dropped in any manner to have caused any damage. It started after the driver update, and even tho I rolled back the driver, it still does this.

Hi @rbuckner35 ,
Thank you for visiting the HP Support Forums and Welcome. I have looked into your issue about your HP Pavilion 17t-f000 Notebook and issues with Beats Audio and startup issues. The startup looks at the USB as one of your Boot options. So it can not load anything until it know that this is not a boot device.
You could restore the BIOS with this document selecting the reloading the BIOS default settings which could resolve the issue with the sound.
Here is a fix that has helped others.
1. Right click the Speaker icon in the bottom right corner by your time.
2. Click Playback Devices.
3. Click Speakers.
4. Click properties.
5. Click the advanced tab on the Properties window.
6. Change the Default Format drop-down to the highest quality.
7. Apply the properties.
8. Click OK to close the properties window.
I hope this helps.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

How do I fix a Configuration Error on MacBook Pro?

I have a MacBook Pro 2.4 GHz Intel Core i5 with 8 gigs of memory. I was running CS6 and my video board went out. I got it fixed but lost all my data on my hard drive. So I tried installing cs6 from a disk image that I had saved and after entering the serial code I received that my license was revoked. That could be true since I was at another company when I purchased it. Now I'm trying out the TRIAL Adobe cloud solution and after installing and getting updates, when i clicked on the app I get a configuration error when trying to open the . Do I need to delete some library items that are conflicting when I tried to install CS6?
Here is the error:
A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
If this problem still occurs after restarting, contact Customer Support for further assistance, and mention the error code shown at the bottom of this screen.
Error: 213:5

Imjoewalkerid the file permissions on your SLStore folder have become compromised. Please see Configuration error 16 | CC, CS for information on how to resolve Error 213:5.

Installation Failure: Windows failed to install the following update with error 0x800F0922

Hi folks,
I have a HP Elitebook Folio 9470p. It came with Windows 8, and I installed it on my corporate domain. I was trying to do some Windows updates so I could upgrade it to Windows 8.1, but it fails installing the updates, whether or not I try
to install them one at a time or all of them. It has about 18 updates it needs from security updates to a .net framework update. I run Symantec EP, and disabled it, checked for driver updates for things like display and networking and they are
all up to date.
I'm at a loss as to what to do. It gives this error in the event log for each file, Event ID 20.
Installation Failure: Windows failed to install the following update with error 0x800F0922: Security Update for Windows 8 for x64-based Systems (KB2862152).
This is the example for KB2862152, but it gives the same error for every one. I've tried to auto fix for Windows update issues and it fixed a couple of the issues, but not all of them, and provides no other help.
I also deleted folders and files from the SoftwareDistribution folder as well, to no avail. Any ideas what I can do to get whatever updates it needs, so I can fully patch it, and upgrade it to Win 8.1?
Thanks for any help!

Hi MM. Mr Kywildcat and Vegan Fan,
GOOD NEW ! At this time, my issue is solved. The only black side is "how ?" : I hope that we will get a response some day ; however, and for in information pnly - hoping this could help someone - I resume some actions which allowed this the happy end
1) about installing 8.1 : I wanted to be sure that gain/pain ratio was positive, and that upgrading from a (potentially) damaged system would'nt produce something looking like a new Win 8.1, but difficult to maintain and keeping some negative potentialities.
2) I was influenced by the fact that this
0x800F0922 error acted as "a serial killerror", whose root cause could be a unique update error at reboot time concerning several (>20) packages, so I decided to test some manual upgrades.
3) Manual update (i.e. manual download and maunching of .msu packages) of the 2 following packages
(whose update previously failed on a Windows Update) was successful : .NET Framework version 3.5 for x64 (KB2898866) and Camera Codec Pack Windows 8 for x64 (KB2899190)
4) So I decided to try Windows Update on a selection of packages, first : those concerning .Net Framework 3.5 and 4.5 (that is: KB2898866, 2901120, 2898865) --> Successful !
5) finally, I selected almost all other packages, with some exceptions wich I (think to) have no need for : KB2871690, 2904659, 2843630. To be complete, here is the list of pakages updated one time at all :
KB 2892074, 2893294, 2893984, 2909210, 2912390, 2916036, 2889784,2903938, 2911101, 2913152, 2917499
--> always succesful.
I am not a specialist, but I uess that this 0x800F0922 error hides another problem which is globally "H-RESULTED"
to all updates pending in one update operation with reboot. This could be assumed from this CBS.log exterped from my last wrong attempts, where root cause seems not to be
0x800f0922, but 0x80004003 :
2014-02-15 21:29:13, Info CBS Could not get active session for current session file logging [HRESULT = 0x80004003 - E_POINTER]
2014-02-15 21:29:13, Info CBS Not able to add pending.xml.bad to Windows Error Report. [HRESULT = 0x80070002 - ERROR_FILE_NOT_FOUND]
2014-02-15 21:29:18, Error CBS Startup: Failed to process advanced operation queue, startupPhase: 0. A rollback transaction will be created. [HRESULT = 0x800f0922 - CBS_E_INSTALLERS_FAILED]
Anyway, thanks to you who spent some of your time to describe issues and search/ suggest solutions ; I will upgrade my system to 8.1 anyway, some of this day, when I am sure that my configuration does not hides some other problem. I thing that potential
issue remains until maybe a new KB corrects it, wrong :-) ?
And I hope that you - Mr Kywildcat - can upgrade your system on "current levels" trying similar attempts.
Phil

Driver update configuration error

Similar Messages

Maybe you are looking for