Driver version for xp

i purchased a new sbli've platinum 5. way back when,
im trying to use the original apps like audiohq and mixer with winxp and i have
done this before, that is untill a new sbli've install with sp2.
so whats the first driver version number that works with xp
i've tried 4 different installs from the install cd to li'vedrv july 7 to the update to the unidriver. the closest i can get it to work with winxp sp2 the unidrvs but none of the application not the li've dri've works ?
an earlier install with new drivers had the apps working but the only problem i had was the line2/mic2 would not unmute.
has anyone get a working audiohq and mixer working with xp sp2 ?

This board is filled with dozens of people trying to get their SB drivers/cards working in SP2, me included. I have my SB Li've! working with the Windows drivers, but have not been able to get it to work with SP2. Still working on it. I am fairly sure this is a driver issue. I hope that Creative is working on updated drivers.

Similar Messages

  • Finding an older driver version for LaserJet Profession​al M1212nf MFP

    Dear all,
    I am looking for an older driver version for our HP LaserJet Professional M1212nf printer, since with our SAP-Citrix system I could only print reports from that version. The version is 20100331 (1.0.1.19178). Is there any place where I could find this driver version? If not, is there any way to transfer the printer driver to the new computer?
    In the meantime I found the HP FTP path where various drivers can be found: ftp://ftp.hp.com/pub/. However, I don't know where I could find the driver I am asking for. Could please someone help me with this?
    Best regards,
    Radu

    @RaduPopa ,
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post personal information (serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    Thank you for visiting the HP Support Forum.
    I work for HP. However I speak only for myself, not for HP nor anyone else

  • Driver version for NI4351 under XP

    Hello,
    I am trying to use a NI4351 board to acquire thermocouples under VB.Net with NIDaq 6.9.3f5. I have a driver on the CD that comes with the board. However, installing the driver shows a version for WinNT/95/98. I downloaded from NI Web Site and foudn an ni435x.exe that is supposed to work with Win2K/XP.
    When installing it also shows version for WinNT/98/95.
    When calling functions for the driver, I always get an error FFFFD800. Sample installed with the drvier show up the same problem.
    Thank you for your help
    S. BARTHES

    Currently .NET is not a supported platform for that driver. I know some people have had success getting things to work, but it will take some know-how on your part. Here are some comments from another .NET user with the NI-435x driver. This customer was using C#.
    1) The NI 435x driver must be installed
    2) LabWindows/CVI support must be installed (under DAQ traditional drivers)
    3) Each DLL method that is to be called must be declared  using the DllImport attribute and both the extern and static modifiers.  
         For example, the following is the declaration for the NI435X_Getting_Started_No_Acc  method:
            [DllImport("ni435x_32.dll")]
            public static extern int NI435X_Getting_Started_No_Acc(string resourceName, string channelString, short
    mode, double lowLimit, double highLimit, int numberOfScans, double[] scansData);
    4) The following system namespace must be included to add support for the DLL Import and external method calls:
             using System.Runtime.InteropServices;
    5) The ni435x.dll needs to be linked as a reference for the project.   This will also allow access to the constants defined within the DLL.
         For example, the NI435X_VOLTAGE constant is used in the following:
            short  mode  = (short) ni435x.DLLConstants.NI435X_VOLTAGE;
    6) More information on using importing DLLs and external method calls can be found in Microsoft C# Language Specification - section 10.5.7 External methods, and in Microsoft C# Programmer's Reference - Platform Invoke Tutorial.  

  • ATI RagePro128 card G4 400 AGP and driver version for 10.4 - 10.4.6?

    Gidday, folks
    Is this a problem? Trying to eliminate all sources of freezes, quits and panics.
    This is what the System Log records during startup; does it mean that the computer is defaulting to a non-ATI driver, with less capability?:
    Jun 19 07:41:37 localhost kernel[0]: ROM ndrv for ATY,Rage128Pd is too old (0xb6246498)
    Jun 19 07:41:37 localhost kernel[0]: obtaining ID
    Jun 19 07:41:37 localhost kernel[0]: from Registry
    Jun 19 07:41:37 localhost kernel[0]: ATIRage128: using AGP
    System Profiler says there is this kext driver:
    ATIRage128.kext 1.4.0
    And it says the display card is:
    ATY,Rage128Pro:
    Chipset Model: ATY,Rage128Pro
    Type: Display
    Bus: AGP
    Slot: SLOT-A
    VRAM (Total): 16 MB
    Vendor: ATI (0x1002)
    Device ID: 0x5046
    Revision ID: 0x0000
    ROM Revision: 113-72701-130
    Cheers,
    M<

    Hi, M.
    ROM ndrv for ATY,Rage128Pd is too old
    I have a PM G4 Dual 500 MHz that displayed that message in system.log at every startup for its ATI Rage 128 Pro graphics card, but it did not cause a problem. As you can see by this Google search there is not much reported about this issue.
    If you're trying to troubleshoot freezes, hangs, and especially kernel panics, see my "Resolving Kernel Panics" FAQ. This FAQ includes step-by-step instructions for identifying and resolving some of the most common causes of kernel panics. The FAQ is a roadmap: start at the beginning and work systematically through the end, i.e. the "If all else fails..." section.
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X
    Note: The information provided in the link(s) above is freely available. However, because I own The X Lab™, a commercial Web site to which some of these links point, the Apple Discussions Terms of Use require I include the following disclosure statement with this post:
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.

  • Question about newer graphic driver version for Satellite A series

    Hi!
    Probably I'm not the first and last one who will ask: is there going to be any actualization for the display drivers, because the one that are on the driver-homepage of Toshiba are v8.4.0.0 form 2006 :( For example: Far Cry (1 not 2).
    Nearly 2/3 of the landscape is black (when I say black, a mean BLACK). And that's not all. Timeshift wouldn't start at all (yes, I know the card will not support full graphics, but I've played games with much better graphic on my PC at home (with GeForce 5200 128MB).
    Good think it was just a demo.
    Can't imagine what "nice" surprise it would be if someone gives a 40-50$ for a game and finds out he can't play it because of the drivers.
    Had just tried trails of some programs for 3D animation...Well, only problems :-/
    Another program told me in a straight line - drivers not up do date.
    Updating drivers will fix most graphical issues etc....
    Thanks for the help in advance.

    What Satellite model dou you have?
    As Akuma said, you can try modified drivers or drivers that are not from Toshiba. But with these drivers you could get more problems as now.
    As far as I know the games need a lot of power and a Satellite notebook was not made for computer games. The Qosimo series is ideal for playing games.
    If you want to play games on a Satellite notebook, you should not set high quality settings in game. It runs better when you play with lower settings.

  • I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supp

    I have a tesco router and an external hard drive attached to it as a network drive (shared) for my macbook and MB-Air. Have no problems with my MB accessing it, but with MB-AIR it says -  'the version of the server you are trying to connect to is not supported. pls contact your system administrator to resolve the problem'. MB-Air uses maverick downloaded yesterday - upgrade from mountain lion. MB uses snow leopard still, as i am quite used to it and am thinking of upgrade if mavericks work fine on air. Also have parallel on snow leopard but it is no longer supported according to mac website - if i upgrade am i going to lose my parallel and will have to buy a new one!!!

    Yes, the Old Master file has a folder for each year where I find all photos from that specific year. I am attaching a screen shot of the file.
    In the meantime i have managed to download all photos (it did not download any video files though in mpg, avi, 3gp, m4v,mp4 and mov format) to a new iphoto library. Unfortunately the photos are quite mixed and often doubled up. I ma considering to purchase iphoto library which checks all duplicates in iphoto. this will save me a lot of time. What do you think?

  • I need to use a Driver Version 1.4 for my my Sharp printer.  When I add the printer, it is driver version 1.3?

    I need to use Driver Version 1.4 for my Sharp printer.  When I add the printer it says Version 1.3?

    Have you asked Sharp whether they have a driver that is Mavericks compliant?

  • Driver Version Not Found" Error when installing drivers for X-fi Xtreme audio

    I recently bought the game Bioshock off steam and have been unable to play as it crashes as soon as I try to launch it. After doing some digging around I found out it was a sound problem. When I was looking at the drivers for my sound card (Sound Blaster X-Fi Xtreme Audio) I noticed that the driver called:?XFXA_PCDRV_LB__04_0079.exe has a fix for Bioshock. However when I install the driver I get the error "Driver version not found". I am positi've it is the correct driver for my sound card. I am on Windows 7 64bit.

    Hey!
    I have Vista Ultimate x64 and I ran windows update couple days ago. There was a new update for my xtreme audio pci-e. I installed it and now my driver version in creative software update is .3.2. Before i updated i ran creative's own software update. It didn't find any new drivers. I was WTF. I think that new driver fixed my volume problem. I had problem's when there was a deep bass in a song. The sound card lowered volume levels then somehow. Now that happens no more. In vista's device control it shows the driver version as 6.0.0.203. Driver date is 7 october 2008.

  • Create a query in SCCM 2012 R2 for NIC Driver Version

    Hello,
        Is there a way to create a query for the specific NIC driver versions with SCCM 2012 R2? For example I can do this and other descriptors for video i.e.,
    select SMS_R_System.Name, SMS_R_System.LastLogonUserName, SMS_R_System.HardwareID, SMS_G_System_COMPUTER_SYSTEM.Manufacturer, SMS_G_System_COMPUTER_SYSTEM.Model, SMS_G_System_VIDEO_CONTROLLER.DriverVersion, SMS_G_System_VIDEO_CONTROLLER.Description, SMS_G_System_VIDEO_CONTROLLER.VideoProcessor
    from  SMS_R_System inner join SMS_G_System_COMPUTER_SYSTEM on SMS_G_System_COMPUTER_SYSTEM.ResourceID = SMS_R_System.ResourceId inner join SMS_G_System_VIDEO_CONTROLLER on SMS_G_System_VIDEO_CONTROLLER.ResourceID = SMS_R_System.ResourceId where SMS_G_System_COMPUTER_SYSTEM.Model
    like "HP EliteBook Revolve 810 G2" and SMS_G_System_VIDEO_CONTROLLER.Description like "%intel%"
    Is there a script that will give the version for NICs?
    Thanks Bill

    This article provides one way to do it:
    http://blogs.technet.com/b/configmgr_geek_speak/archive/2013/11/10/inventorying-and-reporting-network-adapter-driver-details-and-how-to-report-only-the-wireless-type-in-configuration-manager-2012.aspx
    Jeff

  • Where to download previous driver releases for W500 (need AuthenTec fingerprint version 3.2.0.341)

    Hi Everyone,
    after investigating an issue for hours it turned out, that i need an older version of the lenovo fingerprint package for W500 (AuthenTec AES2810) fingerprint reader.
    Where can i download this driver:
    Driver: Fingerprint Reader for W500 Model 4061W7P (AuthenTec AES2810)
    OS: Windows 7, 64-bit
    Language: EN
    Driver Version: 3.2.0.341 (which is the only version supported by Sophos SafeGuard Easy 5.50.8 full disk encryption and Power On Authentication using fingerprint).
    I could not find any download location for older driver versions.
    Any help is highly appreciated.
    Thank you guys!
    Regards
    Andrea

    Hi Peter,
    your suggestion is not an option for this issue, since i'm under time pressure and i know this will turn out to be a "who is responsible for the fix" problem.Lenovo or Sophos... Besinde this there's no rollback option, since i installed the system this week with the most recent drivers and fingerprint software.
    Maybe i was not precise enough, its the AuthenTec Software Version 3.2.0.341 which i exctly need to get things working (this also includes the device driver but also other things which are recommended to enable biometric authentication). ThinkVantage System Update utility automatically selects the most recent software, which (in this case) will break biometric authentication.
    Can anyone point me to a download URL where to get older Software releases. I was unable to find older releases for the fingerprint software.
    Thanks and regards
    Andrea

  • Installation of Master Collection CS3 (disc version for Windows)  on a laptop without optical drive

    Installation of Master Collection CS3 (disc version for Windows) -  is there any possibility of installing my legitimately purchased MC-CS3 on a new laptop without optical drive? Perhaps through a download link or will tranfering all Adobe files from my old to my new computer do the trick as well? Or do I necessarily have to buy an external optical drive? Thank you for answering.

    No need to buy an optical drive and don't try transferring, it rarely works.
    Download the installer from Download CS3 products
    Install then enter your serial number to license it.

  • UCS B-series :enic driver version 2.1.1.41 is causing kernel panic for RHEL5.7

    The enic driver version 2.1.1.41 which comes with driver iso ucs-bxxx-drivers.2.1.1a is resulting in Kernel panic for RHEL5.7
    When RHEL5.7 OS is installed, the kernel version that gets loaded with the iso that I have is 2.6.18-274.el5 x86_64 whereas the kernel version expected by the enic driver provided by Cisco is  2.6.18-164.el5(supported distribution).  The Cisco documentation says : If kernel version does not match, the enic RPM cannot be installed.
    The enic driver that comes with OS is  ver 2.1.1.9 whereas the one Cisco provides is ver 2.1.1.41 . The system crashes for non-matching distribution after loading the driver version 2.1.1.41 .

    Here are some other details:
    root@rhel57 cisco]# rpm -ivh kmod-enic-rhel5u7-2.1.1.41-1.0.x86_64.rpm
    Preparing...                ########################################### [100%]
       1:kmod-enic-rhel5u7      ########################################### [100%]
    [root@rhel57 cisco]# rpm -qa | grep enic
    kmod-enic-rhel5u7-2.1.1.41-1.0
    [root@rhel57 cisco]# /sbin/lsmod | grep enic
    enic                   79425  0
    8021q                  58321  2 cxgb3,enic
    Thanks,
    Yogesh

  • Can AMD update the Catalyst to the newest version for mac(newest:12.1,driver in bootcamp:11.1)?

    I just installed the Windows,and I installed some games.
    But it said the driver version is a older version(11.1),and it required 11.7 and upper.
    So can AMD update the driver?

    Latest 12-1 for Windows 7 64bit in Mac Pro I've tried for HD 4870 is not MS approved as shown by Dxdiag info below.
    I found that heavy use with game Skyrim, my cooling fans were going louder than with 2011-01-04 V 8.812.0.0 Bootcamp provided driver.
    Free to try, Catalyst Manager is a lot more detailed, confusing even and may allow something that will be better for you.
    The file (s)aticfx64.dll,aticfx64.dll,aticfx64.dll,aticfx32,aticfx32,aticfx32,atiumd64.d ll,atidxx64.dll,atidxx64.dll,atiumdag,atidxx32,
    atidxx32,atiumdva,atiumd6a.cap,atitmm64.dll is not digitally signed, which means that it has not been tested by Microsoft's Windows Hardware Quality Labs (WHQL). You may be able to get a WHQL logo'd driver from the hardware manufacturer.

  • Where can I download IMAQ driver version 1.0 for the PCI-1408 board?

    Because of the computer crash I have to reinstall the NI-IMAQ driver version 1.0 for my PCI-1408 board. I couldn't find the original IMAQ driver which came with the PCI-1408 board. Could anybody tell me where I can download the software? Thank you very much.
    Solved!
    Go to Solution.

    Lowest version I could locate on the ftp site was 1.5, that may work:
    ftp://ftp.ni.com/support/imaq/pc/ni-imaq/
    -AK2DM
    ~~~~~~~~~~~~~~~~~~~~~~~~~~
    "It’s the questions that drive us.”
    ~~~~~~~~~~~~~~~~~~~~~~~~~~

  • I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image an

    I am running Photoshop CC 2014 on Windows 8.1 with an AMD quad core processor and AMD E1-2100 APU with AMD Radeon HD 8210 Graphics Card. I have installed the latest driver version 13.152.0.0. When I activate puppet warp, the mesh appears over the image and I can place the first pin.  However, when I go to add the second pin, Photoshop crashes. I have tried with on a new, blank file, with just a few lines on it, but, as soon as I place the first pin, the image disappears, and then, as soon as I click anywhere else in the image, Photoshop crashes. I have followed all the online advice about settings under the Preferences/Performance interface, but nothing fixes the problem. Can anyone please help?

    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, such as total installed RAM, scratch file HDs, video card specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
    A screen shot could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

Maybe you are looking for