Driver Win7 x64 bit for S10-3s and s10-3

hi all...
where i found driver lenovo s10-3s and s10-3 for win7 x64bit and x86bit??
please help me...
thx...

Hi there,
Driver for my Ideapad S-Series
Ideapad U260   Windows 7 64 Bit ( audio driver didnt match)
S10-3s Windows 7 32 Bit
S10-3 Windows 7 32bit
64 Bit on Atom based Netbook that can use max 2GB Memory isnt exciting ...produce more probs than usefull working,
cant recommend 64bit system on an Atom based system at all.. .
I would prefer Windows 7 32bit
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

Similar Messages

SATA Compatible AHCI Driver win7 x64 bits,

I NEED YOU

Hi,
1. Please write your notebook product number (p/n) and country of purchase.
Resource:
How to Locate the Notebook product number (p/n)
2. Could you tell us why you need SATA driver?
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

Differences between S10-2, s10-3, and S10-3t

Hey all!
I've been looking around the internet for teardowns of the s10-2 and s10-3 netbooks, but I couldn't find any so I figured I should ask the source. I know that the s10-2 has the ability to be hackintoshed, but I didn't know of any hardware differences between that and the s10-3 to know if it would be hackintoshable.
Also, is the s10-3t just an s10-3 with a touch screen module?
Thanks!
Andy

s10-2 is still at Atom N280, GMA950 and WLAN b,g, while s10-3 and s-10-3t have N450, GMA3150 and WLAN b,g,n. The difference between the s10-3 and 3t is the touchscreen, battery, keyboard, trackpad, and motherboard layout.

What is causing software "hangup" and inability to print with Firefox 20.0 on Win7-64 Bit for PC?

Just updated Firefox with Ver.20.0 on a PC running Win7-64 Bit. Since doing this, Firefox seems on occasion to be slow/unresponsive requiring multiple clicks on a button to perform function. More of an issue is the fact that frequently get a message that document will not print since there is no access to printer. After exiting Firefox and then trying to restart program, get a message that Firefox is still running and either shutdown or reboot computer (which does seem to work). Have the same issue with a second PC running WinXP. Printer works fine with other programs, ISPs, etc.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

Automatic Duplex Prinitng not available on Win7 64 bit for Photosmart c7280 printer

I have a Photosmart c7280 printer that I originally purchased for a WinXP PC. I upgraded to a new Win7 64 bit PC and downloaded and installed (wireless) the full driver and was able to setup automatic two sided printing. However, the printer would drop often and I have had to reinstall a number of times. I have just reinstalled and am trying to setup an option for automatic two sided printing, but it is not an option. I cannot set that option. Is this missing from the Win7 driver or is there a setting I am not finding?

BarnDog, when you are are setting up your printer are you using the Printer Preferences in Devices and Printers to allow it to automatically duplex (there should be an option to allow that under "Advanced" settings).
Also, are you installing the printer from the PnP drivers that are in place when you plug the USB cord in or are you using the full feature software and drivers from the website (linked below)? If you don't have those drivers, I would recommend removing the USB cord and uinstaling the printer, then using the driver download and when prompted plugging the USB cord back in.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76036-1&cc=us&dlc=en&lc=en&...
Let me know!

Which jdbc driver should be used for sqlserver 2000 and where to put it.

hi all,
My odi is 11g. I met the error infor "Could not load JDBC driver class [com.microsoft.sqlserver.jdbc.SQLServerDriver]" when i tried to connect to a sqlserver2000 database.
The questions are:
1. which jdbc driver should be used for sqlserver 2000?
2. which folder to put it in?
3. how to set the physical topological "Microsoft Sql Server" to use this jdbc driver?
failed tries:
i downloaded the driver "SQL Server 2000 Driver for JDBC Service Pack 2" and put it in the following folders:
1. .../oracledi/drivers, and set this path to CLASSPATH.
2. .../oracledi/userlib didn't exist, i created it and put the driver in.
3. .../oracledi/agent/dirvers, in which a readme file exists and told me to put drivers in this folder.
All these works were not useful. when I start odi.sh and try to connect to sqlserver2000 database, the same error infor came up.
my environment is:
os: Linux 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
java: Java(TM) SE Runtime Environment (build 1.6.0_13-b03) Java HotSpot(TM) 64-Bit Server VM (build 11.3-b02, mixed mode)
ODI: 11g, installed in /users/oracle/odi/
please help me,thanks a lot.
jun
帖子经 Jun编辑过

Hi,
You should check which JVM version is required by that version of the driver, I think the 2.x versions require a 1.6 JVM
What error are you getting? If it is the "com.sunopsis.sql.c: No suitable driver", it indicates it can't find the jar file (sqljdbc.jar) for the driver you specify.
Drivers folder in ODI 11g is under
C:\oracle\product\11.1.1\Oracle_ODI_1\oracledi\agent\drivers.
if you are using the standolone version
On windwos :
C:\Documents and Settings\<userName>\Application Data\odi\oracledi\userlib
on linux
$HOME/.odi/oracledi/userlib
Have a read of :- http://download.oracle.com/docs/cd/E14571_01/core.1111/e16453/install.htm#CHDBIFAJ
Thanks,
Sutirtha

How can i format an external drive to be used for both windows and mac

i recently bought a macbook pro and used bootcamo so as to be able to run win7 and mac. I now wish to have an external usb drive so as to backup and tranfer files between the two os's. How can I do this?

Firstly,
There is a forum for MacBook Pro - not this. And for Boot Camp.
You can:
add Paragon HFS driver to Windows which works
add Paragon NTFS for Mac OS X
USB is of course slow and while people use it for backups and TimeMachine, that is one place where FW800, eSATA or USB3 would be better served.

New installation win7 32 bit but cPU high and laptop hot

I've upgraded an Acer from XP to win 7 home premium 32 bit, got an expert to install the drivers, and noticed the system was slow and the laptop got hot after a short while (30 minutes). Looked at CPU which varied between 9 and 65%, average about
45%, and while trying to determine the effect of changing from Aero to basic desktop, got it up to 100%. Removed most gadgets on the desktop. All to no avail.
Laptop doesn't feel reliable anymore. Didn't recognise an external drive twice (paging error) and it's generally unhappy.
I saw most of the CPU was being hogged by good old searchfilterhost.exe. I thought that had been resolved with win 7. I studied the various posts online, unclicked XML file (though it came back), stopped media player shared app, and reduced
the number of files and folders to be indexed. It began again. Laptop is now faster but remains warm and CPU is still far too high. I let index run in the hope that when it's finished, it will calm down. When it gets hot, I switch
it off. Search has now indexed about 30000 files (so has some time to go) but CPU is still high and interestingly, is not really affected by me using the laptop. It almost never reverts back to 0-5%.
I have ESET AV and had windows defender on. (Switched that off to see if it makes a difference). Scanned. Nothing of note found.
I don't wish to lose my laptop by overheating so am a little worried. I can disable windows search but I find it really helpful. Troubleshooter found nothing.
Would love advice. Posts re this issue tend to be old. My installation is new and I have relatively few apps and prgrammes. RAM is 3 GB. Slow processor but enough for win 7.
Another laptop with win 7 64 bit is just fine. Searching has been completed though.

Hi,
My bad. Apologize.
Windows search(searchfilterhost.exe) sometimes would take the CPU at a high usage, older posts suggested to disable it or change the start type to manually, or rebuild the indexing, which seems not to be so good as a workaround. And some
folks don't have the high CPU usage regarding Windows search with a clean install, compared with upgrade install from Windows vista to Windows 7.
Before going further, could we take a high CPU usage Capture in order to determine the causes? follow this:
Note: WPT is a tool which we need to install first.
WPT: WPR/Xperf: Capture high cpu, disk i/o,
file, registry, networking, Private bytes, Virtual bytes, Paged Pool/Nonpaged pool and/or application slowness.
Also please take a capture using process monitor(Also a troubleshooting tool):
Troubleshooting with Process Monitor
If possible please upload the results into skydrive and post the link here.
Thank you.
Best regards
Michael Shao
TechNet Community Support

Hard drive to airport extreme for time machine and iPhoto library

Can I buy an external hard drive and connect to my airport extreme to be used to host my iPhoto library. Meaning that no mater what Mac I upload an image to iPhoto in, it is referencing the same library on an external drive.

While you can do this as Kappy points out, there a few details that you might want to consider before you make the move.
1) Time Machine backups to a drive at the USB port of the AirPort Extreme are not supported by Apple. While this does seem to work for some users, others (like me) have difficulty with corruption issues. The bottom line is that this is not a reliable method to back up your important data....and, no support or help from Apple if you do have difficulties.
Reference this Apple Support Document to confirm:
"Time Machine can’t back up to an external disk connected to an AirPort Extreme......"
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html
2) If you move the iPhoto library to the hard drive attached to the AirPort Extreme....your original or master library now resides on that disk.....and you have no backup for the library.....when, not if.....the drive has a problem.
3) You might want to post in the iPhoto forum to ask if it is still an iPhoto requirement that only one user at a time can have iPhoto open with the shared library arrangement.

Nvidia CUDA driver update fixes crashes for Premiere Pro and other applications

We are seeing reports that the CUDA 5.5.47 driver update released today addresses the crashing problems introduced by the CUDA 5.5.43 driver update in Premiere Pro and other applications. So, if you have an Nvidia GPU, please update your drivers to use the most recent version of the CUDA driver.
Thanks!

It should be added that only Macs and Quadros need the CUDA driver. That is not required for use with GeForce cards on Windows.

Nvidia CUDA driver update fixes crashes for After Effects and other applications

We are seeing reports that the CUDA 5.5.47 driver update released today addresses the crashing problems introduced by the CUDA 5.5.43 driver update.
So, if you have an Nvidia GPU, please update your drivers to use the most recent version of the CUDA driver.
On Mac OS, you can update your version of the CUDA driver from the CUDA panel, available from the Mac OS System Preferences. For CUDA downloads, see the Nvidia website.
Also, make sure that you have installed the most recent updates for your Adobe video applications.

I actually had a very negative thing happen to me when I updated CUDA to 5.5.47, it broke my computer! Here's what happened and how you might put a band-aid on it for the time being....
Specs:
MacPro (Mid 2010)
Mavericks 10.9.2
ATI Radieon HD 5770 1024 MB
1) I went to System Preferences > CUDA > Update and ran the updated for 5.5.47
2) After the update was successful, I launched Adobe Prelude CC and it crashed immediately. Then I launched Adobe Premiere CC, crashed on startup.
3) I restarted my computer
4) Tried launching Adobe Prelude CC again, crashed.
5) Restarted my computer in Single User Mode, Ran a File System Check, shows that the Mac HD Appeared to Be "Okay"
6) Rebooted and went to System Preferences > CUDA, it shows that I had 5.5.47 but that a UPDATE WAS REQUIRED, the problem was that it didn't have an update button
7) I went to the CUDA update website and found the 5.5.47 update for Mac, ran it and it appeared to install successfully, but the applications still crashed and the preference pane for CUDA still showed that an update was required.
8) I called Apple, they suggested re-installing Mavericks, so I did. Still the apps crashed and CUDA showed 5.5.47 with an update still being required
9) I searched for CUDA and found that it was in HD > Library > Frameworks
10) I moved the CUDA Framework file to my Desktop to make a copy and to remove it from the Frameworks folder
11) Launched Adobe Prelude CC and Adobe Premiere CC and they worked fine.
I know CUDA does some wonderful things when it works, so if anyone has any suggestions on how to re-install and it get it working again, please let me know.

External hard drive filesystem to use for both pc and mac

hi everyone,
i've got a 120 gig portable WD passport harddrive that i'm planning on using to move files between my pc and macbook.
it is recognized fine on both and I am able to copy files to my macbook but cannot write files to it, i'm assuming it has to do with the file system it's using (not sure what it is off hand bought it used and preformated)
any suggestions on how to get it working on both platforms?

Important Note: Reformatting a HD will overwrite all existing files.
Before attempting Reformat,Be sure to Back-up important files to another HD,iPod,CD or DVD.
Jim
PowerBook G3 500 Mhz "Pismo"/ 2.0Ghz BlackBook 2GB OWC RAM Mac OS X (10.4.9)

TS1538 i try to download the 64 bit for my itunes and everytime it pops up a little box sayng "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient pirvileges to start system services." how do i get this to

i just want to be able to sync my ipod to my itunes so can have my music but my ipod isnt even conecting to the itunes because of this stupid (AMD) please help, i have the new 11.5 itunes just that will not install

See:
access privileges for Itunes: Apple Support Communities
ITunes Access Privileges Error?!?!: Apple Support Communities
iPhone - not enough access privileges: Apple Support Communities

Qosmio F60 and Win7 x64 Drivers

Hi, i just purchased a Qosmio F60:- PQF65A-016002 and did a clean install of windows 7 Pro x64.
But i am now unable to find any drivers for it. i have looked in the toshiba support but it brings up no drivers for my machine.
If someone could point me in the right direction that would be great.
Thanks
Alastair

Hello Alastair
Why you have done this stupid mistake as hundreds of other notebook owners?
It is logic to check support at first and be sure certain operating system is fully supported and then installed own OS. Isnt it?
Qosmio F60 is newest notebook and even not available worldwide so you must be careful with support for it. The drivers will be offered soon or later but it can take some time.
What to do now?
Either go back to factory settings or try to use some drivers for other Qosmio models with similar hardware configuration. Try with X500. It is definitely supported for Win7 x64. Maybe Toshiba tools and utilities can be installed on your F60.
Play a little bit with it. Nothing can goes wrong now.

External hard drive for both windows and mac

hello, all - just bought a western digital 500gb my book premium edition external hard drive. will be using for both pc and macbook, not necessarily to share files (though i may on occasion), but rather as a backup. been researching the discussion boards and concluded that i should use it as pre-formatted fat32. few questions...
1) if i do use to share files, from what i understand i will be able to read windows files with my mac but i can't read mac files with windows (unless i have macdrive installed). is this correct?
2) since mac can read/write to fat 32, is it necessary to partition the drives and keep the files separated? i talked to a "computer guy" earlier today and he said i should consider having two completely separate external hard drives as having files from two different operating systems on the same drive could cause major problems for both... i didn't really believe him.
3) i have seen different posts stating using fat32 format for mac limits file size to 4gb. another post said 32gb. which is right? i have os is 10.4.7 if that makes a difference.
thanks in advance for any insight.

2 - i don't mind partitioning at all. but he strongly suggested not even partitioning but using two completely separate hard drives. yeah, the 500gb was a bit overkill, so if i can use it for both as opposed to one and buying an additional, i'd rather.
2/3 - if i partition, is it best to divide it into ntfs and hfs+? or should i keep the pc portion fat32? if the mac portion is hfs+, can i store any size file? i have videos that are anywhere from 10-20gb, and i'd like to get them off my computer and into the external drive.
thanks.

Driver Win7 x64 bit for S10-3s and s10-3

Similar Messages

Maybe you are looking for