Driver without bloatware for LaserJet P1102w

I'm trying to use an HP LaserJet P1102w that's on my home network. I'm looking for the drivers, but I'm uncertain of what to download. There is a 100+mb package that declares I need 500+mb of space to install. It comes with the driver and a bunch of extra software that I don't need. I assume that it is the extra stuff that takes so much space, since drivers are much smaller. There are also two other packages that say they are "updates". I'm not sure if I can just download the updates and they will install the driver from scratch or not. What should I download to get the driver and nothing else?

What operating system? There is a basic driver available through Windows Update in Windows 7.  You can get this driver by simply attaching the printer with a USB cable.  
Once this driver is installed you could install the update from the HP website.
Bob Headrick,  HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Similar Messages

  • How can i cancel a password i set in the html config utility for laserjet p1102w under mac osx 10.6?

    After setting a password in the Networking tab of the HTML Config Utility for HP Laserjet P1102w under MAC OSx 10.6, I cannot access either the settings or the Networking tabs again. How can I access them or just cancel the password I set?

    hi,
    I beleive your question has been answered in a different post
    http://h30434.www3.hp.com/t5/Printer-Networking-and-Wireless/Reset-the-admin-password-on-the-web-pag...
    hope this helps
    Russ@HP
    Say thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution
    (Although I am employed by HP, I am speaking for myself and not for HP)
    +++++++++++++++++++++++++++++++++++++++++++++++++++++++

  • Need to download Mac driver (OSX Mavericks) for LaserJet P1005

    I am visiting a home that has a HP LaserJet P1005.   I need to install the driver on my MacBook Pro Retina using OSX (the latest version: Mavericks).  The owner of the printer has an install disk for the driver but these new MacBook Pros no longer have an internal optical drive.  So I need to download the driver from the internet.  The printer is now out of warranty, not that it should matter.  The HP site says to get the driver from Apple using Software Update but Apple does not have it.  The HP site says if Apple does not have the driver that the older driver on your computer will work - but I don't have that.   So I have not been able to find any support post that helps me.  I tried calling the 800 number and was on hold waiting for half an hour before I gave up.  Please help!  I need to print some documents in the next few days before year end.  Thanks.
    This question was solved.
    View Solution.

    Hi,
    Restart your Mac, then plug the USB and try running Software Update again.
    if the same persists install the dollowing package prior adding the printer under Pritners & Scanners:
    http://support.apple.com/kb/dl907
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Windows 8 Driver Informatio​n for LaserJet, ScanJet, and other supported printers.

    To help customers successfully use their products with Windows 8, HP has identified recommended drivers per product. Please visit the following support documents for more information:
    HP LaserJet – Printers, MFPs, and All-in-Ones supported in Windows  8
    HP Scanjet – Scanners supported in Windows 8
    For HP Business Inkjet, Designjet, Deskjet, Officejet, Photosmart, PSC, or another supported product, go to Supported Printers for Windows 8.
    HP understands that Microsoft has released a Windows 8 Release Preview version. HP is not currently supporting
    any Windows Release Preview operating system versions. If you have any questions about the Windows 8 Release Preview,
    please refer to the Microsoft’s web site at http://www.microsoft.com/.
    I am an HP employee.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution

    mikemalins,
    To add - currently you may use your product on Windows 8 but a Full Feature Software Solution is not yet available
    For USB connetion you may print and scan via Windowws Fax and Scan by adding the device from Devices and Printers.
    For network connection you may print by adding the device from Devices and Printers.
    If you have the RTM version you may also scan through the network by using the HP Scan and Capture app:
    http://apps.microsoft.com/webpdp/en-us/app/hp-scan​-and-capture/94fffdd0-bb3b-4adc-96ca-24c1d79e16c6
    As mentioned by the document above, the full software solution expected to become available prior the public OS release (Oct 26th)
    Regards.
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How to re-download PS Elements (on replacement hard drive) without paying for software a 2nd time?

    My hard drive completely died and I lost all my files and programs.  (I usually have everything backed up but unfortunately my back up drive had had issues about a month before and I hadn't got around to getting it fixed - lesson learnt the hard way!)
    I now have a brand new hard drive in my laptop and need to re-download and install PS Elements but I don't want to have to pay for it a second time. 
    How do I do this?

    Have you bought the PS elements or you were using it as the trial?
    If you have bought the software then you ca download and install the software as you did earlirer.
    and also please tell us your OS and verison of PS elements.

  • Driver without software for HP D110a?

    I am looking to install the drivers to print and scan but not all the packaged software that HP provides. Any suggestions? The printer is HP Photosmart D110a and I'm running Snow Leopard.

    You can only download a disk image containing all the drivers and software. However when you open the installer you may be able to select which item to install. If you don't have this option you can only install everything and then delete the additional software.

  • Hp Laserjet P1102w Doesn't show up in Print and Fax list OS 10.5.8

    Got an HP Laserjet 1102w and tried to install under Mac OS 10.5.8.  I downloaded and sucessfully ran the HP drivers but when I go to add the printer under system preferences/printers and fax the list of available printers is blank.  I've tried several routines suggested by a web search of the problem to no effect.
    Anybody out there solved this?
    This question was solved.
    View Solution.

    Thanks for your attention.  I figured out the solution.  See below.
    The printer was connected by USB and I was also trying to get the wireless connection set.  I had intermittent progress on both fronts but could not get a successful installation either as a USB connection or wireless connection.  The printer would "disappear" off the list of available printers (using the "+" to add printer, OS 10.6.8) or not respond to setup commands.  And I could not get the printer's wireless connection to my network to "take".
    Printing the  configuration page was of no use.  If the printer is unable to connect to the wireless network it reports the printer IP address as 0.0.0.0. 
    TO SOLVE THE PROBLEM
             (clicking + under "Print & Fax" the printer does not appear or the printer name disappears)
    1) replace the USB cable - the original was susceptible to cutting out;
    2) give up on wireless - to - wireless set up methods - no amount of factory resetting would clear the mystery connection block;
    3) set up the wireless connection by way of a (good) USB cable;
    3) switch the browser used to view the printer's setup page from Firefox (34.0.5 for Mac OS 10.6.8) to Safari
    4) use WPA security mode (not WEP as suggested by HP's help files).
    The primary troublemaker was the bad USB cable.  Going thru a wireless set up presumes that the printer can connect to the network. As already noted, the wireless connection was not working.  The blue network light would not come up steady.  Some transmission option was blocking sucessfull handshaking between the printer and my wireless router.  I tried the recommended factory reset methods without success.
    I needed a good USB connection to get to the printer's setup options.
    Don't know what was up with Firefox - a bad plugin or something?  It just would not connect to the printer via IP addressing.  Safari worked fine.  (Now the printer is successfully setup Firefox has decided to work too.)
    SO THE SOLUTION IS:
          1) connect the printer and Mac via a (good) USB cable;
          1) use Safari to get in to the printer's setup functions (via system preferences/print & fax/options & supplies/show printer web page);
          2) follow the recommended setup options (HP support for Laserjet P1102w, OS 10.6, using a USB cable to set up a wireless connection);
          3) select the proper wireless network from the list;
          4) reset the security mode to WPA; and
          5) give the printer the correct wireless network password.
    Thank-you, and the forum, for your help.

  • Message 'computer unable to connect to printer' appears during installation of laserjet p1102w.

    During installation of wireless software for Laserjet P1102W on computer with XP Professional (pk2), the message ' printer was able to connect to wireless network.  However, this computer is unable to connect to the printer.'   I verified the computer and printer both connected to same named network with same WEP , open, key, etc. credentials.  I have a linksys connected to the computer and cable modem. When I connect using the USB connect wire to the computer directly, I can print.   Both software, wired and wireless, were loaded.  My HP Inkjet printer is wired to the linksys and works for multiple wireless network computers. Do I need to have a different printer? I thought i could still have a truly wireless printer!?!  I am a novice at this.  Thanks for any assistance you can give.
    This question was solved.
    View Solution.

    I called HP support.  The tech was very knowledgeable and helpful.  The HP Smart Install program (in printer and on CD) that came in the box  was an old version.  I needed to reset the printer back to factory default and  download the new firmware from HP.com internet site. 
    The older software had an incorrect router address (network). You can see the router (IP) address when you do the Self Test (holding down the 'on' button) under network Information.  The IPv4 address should be the same as your router.  Now my printer and computer are looking at the same network. 
    Works great!  Love this LaserJet.  Faster than my last HP LaserJet 4L.

  • Can't install driver for HP laserjet p1102w

    I have a HP laserjet p1102w installed on my network wirelessly. It was working fine, but then I had to set up the network anew.
    Now I can't get it to work on one of our macbooks. The other one works fine, they both run 10.7.5
    I tried to remove the printer from the list and install the driver again from scratch. I downloaded the newest driver from HP, installed it, and upgraded the printer firmware (using the other laptop). When i click the + in the printer list, the printer shows up, and then i get the message to configure it, saying that the software is available from Apple. It seems to download, and then says the software is not available at this point, telling me to get the newest software from the printer manufacturer. Which is what I did in the first place.
    I tried this several times, also tried repairing permissions, that didn't help.
    Does anyone have any ideas? Would greatly appreciate help, have spent a few hours trying to figure this out to no avail.

    Hi there,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/TS3147
    -Griff W.

  • Help setting up a Laserjet P1102w for wireless printing on a Mac

    I'm trying to setup a Laserjet P1102w on my Mac for wireless printing, but it's not working.  It will print fine using USB, but all the documentation for wireless setup is for Windows, not Mac.  if I connect the printer via USB to my Mac, how will it get an IP address from my wireless network?  Any help appreciated.

    Hi Staxofjoy,
    Based on the information you provided, and comparing to another post regarding this issue (link below) - It sounds like you are running 10.7 (Lion).
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/HP-Laserjet-P1102w-driver-for-Macbook-OS-X-Li...
    Please go to the linked thread above, and look for the post by mikel1004 - he outlined the steps for connecting Adhoc to the printer very clearly.
    Summary of what you will need to to:
    1. Reset Printer to Defaults
    2. Connect to printer via Adhoc from your Mac (This will disconnect you from your home wireless network)
    3. Access HTML Config, and configure the printer's wireless settings manually from there.
    4. Reconnect the Mac to the Home Network
    5. Add the printer to the print queue.
    Hope this helps
    I am an HP Employee
    Click the KUDOS Star to say "Thanks"
    Please mark the post that solves your problem as "Accepted Solution"

  • Wireless connecting for laserjet Pro P1102W

    I have a mac - no problem setting up the printer but I can't seem to connect the wireless component.  I have gone into the systems and opened up printer - utility - everything is good but it won't let me put in the encrypted password for my network.  

    Welcome to the HP Forums dcfrk,
    I see by your post that you are unable to setup the printer on the wireless network.
    I can help you with this.
    If the issue is that the HTML won't load, please follow these steps for 10.8 or lower:
    Make sure Safari is set as the default browser. (sometimes the EWS won't open if it isn't set as the default)
    Open Safari, across the top select the Safari menu, select Preferences, General, set as default.
    Close out all applications.
    You can access the HTML from this location:
    On the Apple menu bar, click Go, computer, Mac Harddrive, library, printers, HP,Laserjet, P1100_P1560_P1600Series, open HTML config.
    Go to the network tab, select wireless on the left side, select infrastructure, select network name, select the double
    arrow button to move the network name over to the left side, fill in passwords, apply.
    You should get a solid blue wireless light in about 1 minute.
    Then go to the Apple, system preferences, print & scan, highlight the P1102w and click the minus at bottom left
    corner to delete it, then disconnect USB cable, click the plus sign in bottom left corner and highlight the P1102w bonjour printer, beside Use: make sure it shows the proper printer name and not Airprint, (Airprint is a preinstalled Apple driver with basic functionality) click on the add button. You might have to click on the drop down to select your printer.
    Test the printer.
    Steps for 10.9:
    Here is a Youtube video of the Laserjet P1102w wireless installation for Maverick.
    Laserjet P1102w.
    What operating system are you using? Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Please provide in detail the results if you are still having issues.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Have MBP with OSX10.9- trying to connect  HP Laserjet P1102w  error msg on add printer says driver not available from apple - workarounds?

    Trying to connect a new HP Laserjet P1102w printer via USB to a MBP running OSX 10.p and fully up to date.  Problems getting the correct driver - does it exist and what are the workarounds?
    Many thanks

    Lots of information on the HP web site for this printer with Mavericks, a driver is available for 10.9. Try this web page and go from there.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4159&lc=en&cc=uk&dlc=en&s w_lang=&product=4110304

  • How to install HP Laserjet P1102w without a disk?

    I have a Dell Notebook running MS XP and I want to install my HP LaserJet P1102w which was previously installed on a laptop that has died.
    The notebook does not have a CD drive.  How can I link the printer to this computer.
    HELP please.
    Thank you!!

    You can get the SOFTWARE free here
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=bi-80329-5&cc=us&dlc=en&lc=en&​...
    ***WHEN DOWNLOADING CLICK SAVE not RUN!**** save to desktop to make it easier to find.
    -Open the download
    -Select extract
    -then once it extracts install the software
    If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • I have a macbook pro. I had iphoto on it prior to my hard drive crashing.  Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?

    I have a macbook pro. I had iphoto on it prior to my hard drive crashing.  Hard drive was replaced but iphoto is no longer on. How do I get it back without paying for it?

    Have you tried
    http://support.apple.com/kb/HT4928

  • Driver Require or HP laserjet 1015 PCL Printers for Windows 8.1 64 Bit

    Dear Sir,
    I Working at PGVCL (Leading Electricity Distribution COmpany o Gujarat (India) ) having many HP printers Laserjet 1015 PCL. Now, recently our company upgrade our computer system with OS of Windows 8.1(64 bit),now trouble of printing start. No any above printers install in PC, due to non availibility of that Drivers. I checked HP websites for  that Drivers. but our requirements driver not available in it. Finaly many printers of HP become unusable for us.
    So, you are kindly requested to please provide Drives of Printers for HP LaserJet 1015 PCL for Windows 8.1 (64 Bit) or provide guideline ti install it in our PC. So, we can use HP Printers in our work place.
    Regards:
    Mr. Pranjal [Personal Information Removed]
    [Personal Information Removed]
    Contact No. [Personal Information Removed]

    My Windows 8.1 Professional 64-bit system has a built-in driver for the LaserJet 1015 model:
    You may have to click the Windows Update button in the Add Printer dialogue, then wait (perhaps for several minutes) whilst additional drivers are downloaded, before the list is repopulated.

Maybe you are looking for