Drivers 64v pci Window 98

OK our sys went dwn due to some malfunction.We contacted the Dell Tec Support and recieved Sys Rec Disk to re-install sys with original settings with WIN 98SE.
Sound driver folder/files failed without results?
Contacted Dell again and they sent a link for the drivers:
http://support.dell.com/support/downloads/type.aspx?c=us&cs=9&l=en&s=dhs&SystemID=DIM_PNT_P0 3_XPS_T___&category=0&os=W98&osl=en&deviceid=23&de vlib=3
were unable to get going and so was the Dell tec support so they sent an additional link to do the job and that was :
http://support.dell.com/support/downloads/format.aspx?c=us&cs=9&l=en&s=dhs&SystemID=DIM_PNT_ P03_XPS_T___&os=W98&osl=en&deviceid=67&devlib=3&ca tegory=0&releaseid=R20634
Regrettably that did not work either?We are stuck and need help?
Wonder if there is a relevent update or a relevent driver that will fit work to resolve the issue?Please help ASAP.Your input in the matter will be much help and appreciatedjust4ufolks

Hi JasonMany thanx for the input to my post on the subject.Finally I'm able to do the stuff by looking in to the creative down loads and here is the link that resolved the issue:
SB PCI 64/28/28 vibra application updates (857.07 KB) 0 Nov 00 Download Now To ensure a successful installation, the card must be already installed on the system. You are required to download the following packages. These must placed into the same dire..... Show Details... Filename: capp_setupus.exe SB PCI 64/28/28 vibra application updates CAPP-WEB--US
To ensure a successful installation, the card must be already installed on the system. You are required to download the following packages. These must placed into the same directory:
Creative Mixer 6.04.00 (906,973 bytes) Creative Recorder .04.03 (2,64,085 bytes) Creative Playcenter .55.06 and Creative News 2.50.0 (3,774,332 bytes) Creative Installer .00.06 and setup files (6,37,790 bytes) This is a new applications release for users running Windows 95, Windows 98, Windows NT4, Windows 2000 and Windows Millennium Edition. This update supports the following products:
Sound Blaster PCI28 (Model No. CT4700, CT4750 & CT475) SB 6 PCI (CT4740) Creative Ensoniq AudioPCI (CT480, CT48, CT482, CT485 & CT486) Vibra 28 (CT480, CT48, CT482, CT485 & CT486) 370 and 37-based card models Please refer to the README. TXT file for further details. Drivers Date . Sound Blaster PCI cards Web Update for users running Windows 98SE, Windows ME, Windows 2000 or Windows XP. (4.62 MB) 9 Dec 02 Download Now Overview This package is meant for Sound Blaster? Vibra28, Sound Blaster 6 PCI, Sound Blaster PCI 28, Sound Blaster 4. Digital, and Sound Blaster Ensoniq AudioPCI users running Win..... Show Details...
Ihave seen many posts on this problem and I'm sure there are friends that will benefit from this seach..please share and pass on as deemed fit.Once again appreciate your input.Have a great holiday season..regards ...just4ufolks(Vijay)

Similar Messages

Please help! (factory installed) SBlaster 64V PCI isn't instal

I hope someone can help me. I bought my computer in 2000. (Dell) My Audio was already installed.
I have a SoundBlaster 64V PCI sound card installed. All of a sudden it quit working and now says I
don't have any Audio Driver installed? Can someone please tell me what happened? If it isn't even
installed anymore and it was factory installed do I buy another Sound Card and install? Please help!
Thanks,
Dana

i'm sorry i cannot help i am having the same problem for months i have tried all different drivers and still no luck.i am runnung in windows xp. I hope someone has a solution?gina

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

Solaris 10 won't boot up "Cannot load drivers for /pci@400.....

This is the error message that I am getting on a Solaris 10 sparc server
scsi: no major number
cannot load drivers for /pci@400.....
Can't load the root filesystem
Type 'go' to resume
{0} ok
Is there a way for me to correct this issue. It looks like I am missing a scsi driver to boot up the server? Is there a way to boot into single user mode, mount the filesystem and rediscover the hardware, etc.....

First i guess you have to verify that you can find the disks with a probe-scsi-all
next you can boot it of a CD-rom/dvd into single-user:
boot cdrom -s
.. or similar into single-user from a jumpstart image:
boot net -s
Then you can mount the root disk under something such as:
/mnt
and rebuild the config with:
devfsadm -R /mnt
be careful if you have a mirrored filesystem though, you don't want to update just one of the mirrors without first breaking the mirror..
.7/M.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp 4000n.

I am having a problem installing the x86 drivers on a Windows 2008 server for a hp laserjet 4000n.

Hi all,
Sylonious, did you manage to sort this problem out? I have been experiencing similar problems. I think my problem was because I had many different versions of JDKs. I have done a complete re-install. I would be really grateful to you (and anyone else) for help with this problem.
I have re-installed JSDK1.4.2_03, set the "path" variable to "C:\JSDK1.4.2_03".
When I compile using "javac" I get an error saying "javac" is not recognised.
When I compile using "C:\j2sdk1.4.2_03\bin\javac Freq.java" no error is thrown.
Every time I try to run a java file, I always get the NoClassDefFound error. When run with the -verbose option, files are loaded from C:\Program Files\Java\j2re1.4.2_03\bin - is this correct?
I have removed all previous references to java in the registry editor.
Please help !
Regards,
Vipul

RAID drivers that support Windows 2003 server for Qosmio G30-153

Hi,
Where can i find RAID drivers that support Windows 2003 server for Qosmio G-series(G30-153 )
Thanks in Advance.
Abdul Hameed

Hi
Windows Server 2003 should support the XP drivers.
So try to search for the RAID XP drivers!
regards :)

Drivers JDBC for Windows CE

I want to develop an application using java which works in a PDA. I whish to access to the Oracle8i Lite installed in the same PDA.
Exist drivers JDBC for Windows CE? It is possible?
Thanks.

Hello-
National Instruments currently does not have any Windows CE drivers and do not, at this time, have plans to develop a driver.
Ray K
NI Applications Engineer

Drivers needed for windows os upgrade?

I'm updating my os from win98 to win2k.
do i need new drivers for pci-7344, pci-6110e and ni-5411 (for pci). Labview version, i believe is 5.1, hardware and software purchased in summer 2001.
Thanks,
Byron Golden
U of Houston
Allied Geophysical Labs

Hello.
There are updated versions of the drivers you would need for those boards available on the web, but your LabVIEW version is very old and thus will not be compatible with those driver versions.
Hopefully you have the CDs with your older driver versions on them. Many drivers are available on the web at:
http://www.ni.com/downloads/
You will need NI-Motion, NI-DAQ, and NI-FGEN for the 5411.
Regards,
Colin C.
Applications Engineering
Colin Christofferson
Community Web Marketing
Blog

These drivers are causing Windows to resume slowly

I have seen the posts below
ATI Radeon Kernel Mode Driver Causing Windows to Resume Slowly
ATI Radeon kernel mode driver causing windows to resume slowly/ event ID 351- using Windows 7 x64
ATI Radeon kernel mode driver causing windows to resume slowly (Win7 x64)
These drivers are causing Windows to resume slowly
ATI Radeon kernel mode driver causing Win 7 x64 to resume slowly...
However in my case I have a lenovo W540 with Windows 7 Professional, Service Pack 1. The message I get is different than the above posts. The drivers mentioned are:
1. Name: Intel Graphics Kernel Model Driver, Filename: igdkmd64.sys, Publisher: Intel Coorporation, Device: Intel(R) HD Graphics Family
2. Name: NVIDIA Windows Kernel Mode Driver, Version 312.69, Filename: nvlddmkm.sys, Publisher: NVIDIA Coorporation, Device: NVIDIA Quadro K2100M
3. Name: RealTech Wifi Display VGA Adapter, Filename: RtlvVga.sys, Publisher: Realtech Semiconductor Coorporation, Device: Realteck Wifi Display VGA Adapter.
My Windows indeed are resumed slower than when I boot up the laptop.
Thanks

Hi,
For this problem, you can also use Performance Recorder to captuer the process of system Resume from sleep.
Please take the screenshot below as reference:
Roger Lu
TechNet Community Support

Drivers update for Windows 8.1 model Lenovo G580 (2689, 20157)

When available drivers update for windows 8.1 model g580 (2689, 20157)....microsoft launch win8.1 18 October and i m also using windows 8.1 RTM ...

Hi Sutanshu,
Welcome to Lenovo Community Forums!
The driver updated for Windows 8.1 will be available only when the full version of the OS (Operating System) is released from the Microsoft and it will be automatically available through “Windows Update”.
Do post us back for further queries.
Best Regards
Shiva Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Coprocessor drivers missing after window 8.1 installed

coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.

morris2672 wrote:
coprocessor drivers missing after window 8.1 installed, I have a file to install it when it ran windows 7; and it did install; but will not install drivers off the file now.
What program are you talking about? Coprocessor is built into the Processor nowdays...
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

DRIVERS REQUIRED FOR WINDOWS 7 (32-BIT) - FOR HP Pavilion g6-2004tu Notebook

Hi everybody!
Today have formatted my Notebook and changed the OPERATING SYSTEM to Windows 7 (32-Bit) (Enterprise Edition)
Need basic drivers for the my HP Pavilion g6-2004tu Notebook for the following devices, currently being Yellow Highlighted by the Device Manager:
1. Ethernet Controller
2. Network Controller
3. PCI Device
4. PCI Simple Communications Controller
5. SM Bus Controller
6. Some Unknown Device
7. USB Mass Storage Device (Although it is reading the Flash Drive)
Your help is requested and reply is anxiously awaited.
Thanks in advance.
Best Regards,
Faraz
This question was solved.
View Solution.

Hello mike_farhat. I understand you're looking for drivers for your G6.
Unfortunately there are no drivers available specifically for Windows 7 32-bit. However, here is a link to the drivers for Windows 7 64-bit.
Another thing you could try is to install both the HP Software Framework and HP Support Assistant. Then you can run HP Support Assistant and the application will scan your PC and automatically download and install any drivers which are available.
I hope this helps. Have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

Are winncom drivers ok for windows xp sp2?

i realize my bluetooth headsets won't work with the current stacks profiles (correct terminology?) on windows xp sp2. And I read numerous websites and fixes for this by downloading the winncom drivers to allow bluetooth headsets to work.
my question is if this is ok to do on BootCamp. Since apple has it's bluetooth profile in the computer to allow the mac's bluetooth to be accessible by windows, will adding or replacing with the winncom drives effect the computer? I use bluetooth to connect my mighty mouse and my wireless keyboard.
someone must have tried this already. I'm surprised there isn't a post about this yet. (forgive me if i just didn't see it)
thanks everyone!!!

You're welcome.
At least when googling for that board I found it offered in a German online shop with it's components listed. It should be possible to google drivers for it's components (Intel G965 + ICH8 chipset, JMicron JMB368 IDE controller, VIA VT6307 Firewire, Realtek ALC888 sound, Intel 82566DC Lan)
http://www.cbo-do.de/shop/product_info.php?info=p15186_MSI-MS-7334-Ver-1-0-MS-7334-MS7334-Sockel-775-PCI-X-IDE-SATA--Zub--NEU.html

DRIVERS REQUIRED FOR WINDOWS 7 (64-BIT) - FOR HP Pavilion g6-1201sm Notebook

Hi everybody!
Today have formatted my Notebook and changed the OPERATING SYSTEM to Windows 7 (64-Bit) (Home Edition)
Need basic drivers for the my HP Pavilion g6-1201sm Notebook for the following devices, currently being Yellow Highlighted by the Device Manager:
1. Ethernet Controller
2. Network Controller
3. PCI Device
4. SM Bus Controller
Your help is requested and reply is anxiously awaited.
Thanks in advance.

http://www.ma-config.com/en
http://techpp.com/2010/01/12/identify-and-find-drivers-for-unknown-devices-in-windows/
good luck

Unknown Devices/Drivers HP dv6885se Windows 7

HP dv6885se
I just installed windows 7 in my laptop from vista. I just can't figure out what this 2 unkown devices are. Please help me.
Details: Status
A.) PCI bus 7, device 9, function 2 -
B.) PCI bus 7, device 9, function 3 -
Hardware ID:
A.)
PCI\VEN_1180&DEV_0843&SUBSYS_30CC103C&REV_12
PCI\VEN_1180&DEV_0843&SUBSYS_30CC103C
PCI\VEN_1180&DEV_0843&CC_088000
PCI\VEN_1180&DEV_0843&CC_0880
B.)
PCI\VEN_1180&DEV_0592&SUBSYS_30CC103C&REV_12
PCI\VEN_1180&DEV_0592&SUBSYS_30CC103C
PCI\VEN_1180&DEV_0592&CC_088000
PCI\VEN_1180&DEV_0592&CC_0880
PLEASE HELP MEEE!!! ((

Hi,
See this post :
http://h30434.www3.hp.com/t5/Operating-systems-and-software/HP-Pavilion-dv6820tx-Driver-Problems/m-p...
Probably need the drivers specific to your model though, so go to HP, then support, and put in your model # and get the drivers.
Jim

Drivers 64v pci Window 98

Similar Messages

Maybe you are looking for