Drivers and software Hp deskjet 2050 j510a All-in-wonder for Windows 8 Pro x64

Hi,
from when I update my system with Windows 8 Pro I can' t use the printer Hp Deskjet 2050 J510a.
I downloaded the latest version of drivers and software for Windows 8 Pro 64 bit:
DJ2050_J510_Basicx64_1313.exe
The application give me at the and of installation the message:
"installation not completed"
and in details I can see:
"Installation error. Operative system not supported. This software can be installed only in Windows XP, Vista, Seven. Change operative system or install the printer in another computer."
The printer as been recognized from the system, and in panel control I can see it, but when I print any page the printer make only half print and than show me a message of " not original or used printer cartridges, press OK to continue or cancel do delate the print" but the print cannot be completed untill the end.
Cartridges are original; I tested the the printer too in an another computer with different operative system: the printer work correctly.
Thanks for your attention

Hello kamran554,
I understand you are looking for the driver to download for your Deskjet 2050 J510a for Windows 8 64bit.
I have located the correct driver for you to download below.
Please click the link to download and install.
HP Deskjet Full Feature Software and Drivers
Good luck to you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Similar Messages

Audigy 4 - Vista drivers and software urgently nee

you know... i have this sound card (Audigy 4 - non pro) for over one year now, AND i don`t have a good driver and software for windows vista home premium x64. last driver for this sound card is:
. Creative Sound Blaster Audigy series Vista Driver 2.2.0002 (38.30 MB) 6 Mar 07.
i mean... 6 mar. 07
how long do i have to wait for you, to relase all the software it is on windows xp oh, this audigy 4 was not intended to use with vista, wright and you want everybody to buy that x-fi sound card with another set of problems in windows vista. nice marketing solution. good for you ONLY.
i`m just tired waiting. my card doesn`t work as it should, nor as it worked in windows xp.
i need all that software. all of it, working under vista. PRONTO!
you will provide that software, or you just lost me as a customer, and along with me, alot more.
btw, daniel_k was only helping people, by providing drivers and software YOU couldn`t, or you just didn`t wanted to. stop deleting his posts or links to the drivers made by him.
just stop that abbusi've marketing strategy, by not releasing software for older sound cards, and forcing customers to buy your new products. no, that wouldn`t happend.

http://forums.creative.com/showthread.php?

Which drivers and software do I download?

I was told I should only download drivers and software updates from the manufactures website.. which would be hp.. so I went to the software and drivers download page and after entering my product information it gave me a list of downloads which was
Driver - Audio (‏1)
Driver - Graphics (‏2)
Driver - Keyboard, Mouse and Input Devices (‏2)
Driver - Network (‏3)
Driver - Storage (‏1)
BIOS (‏1)
Diagnostic (‏1)
Order Recovery Media - CD/DVD/USB (‏1)
Software - Multimedia (‏5)
Software - Solutions (‏1)
Utility - Tools (‏3)
So how do I know which ones I need or do I need to download all of them? I have a compaq cq58 and just want to make sure I keep my laptop up to date!

Several ways to check if you have the version listed or an older version. For drivers use Device Manager.Right click each device,such as Audio, choose Properties.You can check the version of the driver and compare it to the description in the file on your software/driver page. Or just use the option on your sofware/driver page to let HP do a Scan to check your versions against what is new.
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Lenovo Drivers and software

There are a lot of drivers and software listed for my T500 on the Lenovo website but the explanation about what they do is very weak. Can I get that info anywhere? I recently updated my system from Win 7 32 bit to 64 bit and some of my drivers had to be replaced (fn+ function key and Ultranav Touchpad to name two). In the process of finding those, I found all the others. Should I consider updating all the listed drivers that are appropriate for my T500 and Win 7 64 bit operating system? Thanks.
Dave

Install the lenovo update utility and it should get all the ones you need

Canon 860 Series (Pixma) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips

After spending several hours sorting out Canon Pixma OSX problems here are my thoughts:
Canon 860 Series (Pixma 868) Printer Problems with OSX 10.8 (Mountain Lion) – links to Canon Support Site with Drivers and Software with install tips
Problem:
- New imac and MacBook Pro 2012 (OSX 10.8.2) had a problem using Canon Pixma 868 printer on network and would not scan or print using Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print), which has advanced scanning and photo printing functions.
- When I connected the canon printer to my imac, OSX 10.8.2 automatically downloaded and installed drivers for Canon 860 series printer. I could then add the new printer (select ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”) and printer would work while connected via USB but could not get to print or scan over network wifi.
- The original Canon 860 Series CD does not work with 10.8 and the manual / online instructions did not make sense (as based on CD install).
Solution:
1) Install Canon Printer Drivers and Software (from official Canon site)
Go to canon support site, review FAQ, then download and install following Pixma 860 Series software & drivers for OSX 10.8 (links see below). The version I downloaded is in brackets but check for updated version. Full instructions are below.
Canon 860 Series Drivers & Software for OSX 10.8 Mountain Lion:
The base software and drivers needed for using Canon 860 Series on Mac OS X 10.8 (USB) are
1 Printer Driver
(Canon MX860 series CUPS Printer Driver Ver. 10.67.1.0 (03-Aug-2012))
2 Scanner Driver
(Canon MX860 series Scanner Driver Ver. 14.11.4a (03-Aug-2012))
3 Network Tool
(Canon IJ Network Tool Ver. 4.1.0 for Intel Mac (27-Dec-2012)
Canon Software for using advanced printing and scanning functions (while connected to network)
4 Solution Menu
(Canon Solution Menu Ver. 1.4.1 (27-Jul-2012 ))
5 MP Navigator EX
(Canon MP Nav EX Ver. 2.1.3 (02-Auf-2012))
6 Easy-PhotoPrint EX
(Canon Easy-PhotoPrint EX Ver. 4.1.6 (21-Jan-2013 ))
Canon Support (HK) – check your local site
http://www.canon.com.hk/en/download/main/index.do
Select Product and drivers from support site eg http://support-hk.canon-asia.com/
1. Choose a product category
Multifunctional Printers
2. Choose a product series
Pixma
3. Choose a product model
Pixma MX868
4. Choose type of document
Downloads or FAQ
If you have problems installing the software under 10.8, see the FAQ on Canon site. You will need to allow software installs from “unidentified developers by using “Control” Key or by changing your system preferences)
2) Check Canon Printer and Software Working while connected via USB
Once you have downloaded and installed drivers and software and restarted computer, check that the printer and Canon Pixma software (Pixma MP Navigator 2.1 & Photo Print) are working via USB. Open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App) and make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it shows the correct SSID Wifi settings (under the Canon IJ Network Tool App ‘Setup menu’). This is normally done as part of the automatic install but worth double checking
3) Add new network printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”).
After you have checked USB printing turn off printer, unplug the USB cable and shutdown the Canon IJ Network Tool App.
Then turn the printer back on and wait 30s. Then add a new printer using ‘apple menu’ / ‘system preferences’ / ‘print and scan’ / “+”). Once you select “+” (add new printer), wait 10-30s for the Wifi Networked Canon MX 860 Series printer to appear in the new window eg Canon MX 860 series (xx.xx.xx.xx.xx.xx) (Kind: “Canon IJ Network”)
DO NOT ADD THE MX 860 SERIES BONJOUR SCANNER (the Bonjour Scanner is the built-in software, is not needed and often appears first on the add printer list). The Canon scanner can be accessed used through the MP Nav EX Ver. 2.1.3 software (which has much better functions)
You will now have two Printer Canon MX860 (USB) and Canon MX860 (Wifi / Network). Set the Canon MX860 (Wifi / Network) as default and test print and scan
If the Wifi Networked Canon MX 860 Series printer does not appear, check the printer and make sure that the printer can see the wifi network. On the printer select Menu / Settings / Device Settings / Lan Settings / WLAN Setting List. It should say WLAN Active, identify the SSID and have an IP address
If the printer can not see the Wifi Network, plug the USB cable back in, then open the Canon IJ Network Tool App (Applications / Canon Utilities /IJ Network Tool / Canon IJ Network Tool App). Make sure you can see the Canon MX 860 series (xx.xx.xx.xx.xx.xx) and that it has your SSID settings (under setup), if it has this info, restart the computer and the printer and try again

Hi, thaks for response, meant to post as a discussion (not question), wanted to save others time if they get the same problem

Drivers and Software will not work on new hard drive

Hello:
Pavilion DV7-4270us
Windows 7 64 bit
I installed new 500 GB hard drive into the above referenced notebook, as previously installed 640 GB hard drive from factory began to fail.
I have downloaded drivers and software for HP Media Smart, HP Simple Pass Fingerprint Reader, and HP Power Manager from HP Download page, and none of these work.
HP Support Assistant was downloaded and it works, however it says no updates needed.
Is this because I installed a hard drive not purchased from HP?
Thank you for any help you could provide.

No the laptop does not care where you bought the hard drive. Do you have any devices that are not working right in the Device Manager?

When is Lenovo planning to update their drivers and software to 64-bit versions for Windows 7/8?

Many drivers and software for T530 are still 32-bit, despite being offered for 64-bit operating systems.

lenssd9 wrote:
Many drivers and software for T530 are still 32-bit, despite being offered for 64-bit operating systems.
Which drivers are you looking for?
I took a quick look through the T530 page, and didn't see any that were 32-bit only.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Need help install drivers and software

& well after talking with creative for a week
they finnaly gave me the hole cd for the sound blaster 5. sb0680
and then i go to set up and says this?
your version of windows operating system is not supported by this product . please
upgrade to windows 98 second edition or later versions before resuming
installation
i got windows ME ver 4.90.3000
would you guys know why its doing this ?
thanks for your time

yer its old school but 9x was the only series of OS's that were stable and fast.
any way i am sure its made for windows me as it says get windows 98 SE and above
last time i checked windows me is above windows 98 se lol creative gee you guys got real probloms . ps creative mabye trying the drivers on every OS that ment to support the driver will help very much lol and the card is just sound blaster 5.

My HP Deskjet 2050 J510 can NOT scan for my MBA.

My HP Deskjet 2050 J510 can NOT scan with my MBA. It could not print before I download the printer driver as described in the below link...
http://support.apple.com/kb/HT4670
After install the printer drive...
Now the printing function works fine, but the scan function won't work. Could anyone give me a suggestion to make both printing and scanner functions work?
Thank you
Bill

Try to re-install the drivers and software for the printer.
You can also try to run the print and scan doctor, and see if it will auto-fix it.
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03286146
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

HP Deskjet Ink Advantage K209 All-in-One for Windows 10 64 bit.

Hello, Is there already a new HP Deskjet Ink Advantage K209 All-in-One for Windows 10 64 bit. I Was looking and what I only found is: HP Printer Install Wizard for Windows and HP Print and Scan Doctor for Windows. Will be appreciate for help. M.

Hi , Welcome to the HP Forums! I noticed that you are wondering if their is a driver for Windows 10 for your HP Deskjet Ink Advantage K209. I am happy to take a look for you! As far as I can tell, the only software items available, are the ones you already mentioned. The HP Print and Scan Doctor, and the HP Printer Install Wizard for Windows. So if you are looking to install your printer, I would suggest trying the HP Printer Install Wizard for Windows. Hope this answers your question, and have a nice day! “Please click the Thumbs up icon below to thank me for responding.”

X201 Tablet: Drivers not working for Network controller on Windows 7 Pro x64

Hello,
After downloading and installing all LAN and WLAN drivers for X201 Tablet, I couldn't find one that works on Windows 7 x64.
How can I proceed?
Thank you in advance
Solved!
Go to Solution.

I fixed it by downloading this drivers:
https://downloadcenter.intel.com/download/18713/Network-Adapter-Driver-for-Windows-7-
And after installing them and restarting, searching for them manually from the Device Manager.
Cheers

Windows 7 pro x64 and palm centro

I'm running windows 7 pro X64 and the software installed just fine, but not the driver. Does Palm have any plans for a solution? Are there any third party drivers that will solve my problem without having to install a bluetooth device on my pc?
Post relates to: Centro (Verizon)

Hello rpiquette, Welcome to the Palm Support Community!
Palm has moved away from their legacy operating system (PalmOS) and on to a new one called webOS. Since Palm Inc. doesn't even own their own software anymore (Palm Desktop) I'd seriously doubt any further support will be forthcoming for Win7, especially for 64-bit architecture.
Palm Inc. has historically not divulged any "future plans" for software (or hardware). Will a third-party develop a desktop client? I have no idea at this point, but the opportunity certainly exists!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

HP Deskjet Ink Advantage 5525 - Unsuccessful installation for Windows 7 64-bit - Error 5

Hi,
during installation of HP drivers and software to Windows 7 64-bit I receive Error -5 - Installation unsuccessful - Unable to install HP monitor... I've download new software from HP webpage, but received same error.
Could you please guide me trough this problem.
Regards, Max.

Hi @MaxN ,
I see that you are getting a "error 5" when trying to install the printer software. I would like to help you out today.
I would run the SFC on the computer to repair any damaged or corrupt windows files.
Scannow to Repair Protected Windows Operating System Files.
Right click on the installer and "Run as Administrator.
If the issue persists, create a new Administrator Account and run the install from there.
User Accounts in Windows 7.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

HT1338 I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for windows to complete installation it will hook at that stage please i need help.

I have been trying to install window 7 operating system through booth camp assistant, i will finish all the stages for window to complete installation it will hook. the installation cannot be able to complete and i really install windows on it, please i need an assistance on how to go about it.

Right now I have 6 different systems installed. Windows XP, 7, and 8 plus Linux Mint, Commodore, and OS X Snow Leopard (for old times sake), all running on Mountain Lion.
I recommend reading the user manual as it greatly helps getting through the steps, however an intuitive person should pick it up fairly easily.
Thanks to BobTheFisherman for the link.
There are other ways to get Windows on a Mac but I'm a big fan of open-source software.
Give it a try. You might like it or it may not be your cup of tea.

Model 15-d006TU all driver link for windows 7

plz plz plz
model 15-d006TU all driver link for windows 7

Hi:
I have already answered your question yesterday.
http://h30434.www3.hp.com/t5/Other-Desktop-PC-Questions/32-bit-driver-for-windows-7/m-p/3481621
Your notebook is not supported by HP for windows 7 32 bit.
You have to use drivers from other notebooks and manufacturers websites.
If those drivers don't work, then you need to install W7 64 bit.
Asking the same question every day will get you absolutely nowhere.

Drivers and software Hp deskjet 2050 j510a All-in-wonder for Windows 8 Pro x64

Similar Messages

Maybe you are looking for