Drivers error recovering Windows Vista on Satellite A200

Hello,
I replaced the HD of my Toshiba Satellite A200. I replicate the original disk partitioning in the new disk and installed the original SO (Windows Vista) from the recovery disk.
Everything went well. However, when I started Windows for first time, it was unable to end the autoconfiguration phase. An error message appeared on the screen: it had been unable to find all the drivers that it needs.
After accepting the error message, windows rebooted the system without giving me any chance.
Can anyone tell me what went wrong with the Windows recovery process?
How can I add the drivers needed or skip the autoconfiguration process to do it later?

> {quote:title=JoeLouis wrote:}{quote}
> >Does anyone know if there is any chance to interrupt Toshiba recovery process or windows autoconfiguration process to load a specific driver?
>
> No, if you want to add the driver while windows installation and setup process, you have to use an Microsoft Windows disk Toshiba recovery disk contains an image which is NOT the same like a common installation disk!
That's completely right. However, after copying the image to the HDD, the system reboots and loads Vista for first time. Then, the system starts a non-interactive autoconfiguration process (it shows a label similar to "Please, wait...").
Eventually, it shows an error message and shuts down.
This leads me to think that the image copy process went well (the system loads without trouble) but then Windows loads a wrong driver to manage the HDD and crashes.
I would like to know if I can change any option in a configuration file (after copying the image in the HDD and before loading the OS for first time) to make this process interactive or to load a different set of drivers to manage the HDD. Does anyone have a clue?

Similar Messages

All network drivers error 31 Windows Vista 32 bit

Dear,
we have a desktop here with Vista 32 running on it.
It's an Acer *sigh* Extensa E464, so yes it's old.
The problem: all the network adapters in device manager are showing the yellow explenation mark with error code 31.
The strange thing is, I do not know if it's related, that every network adapter (about 25-30, yes, I know, wtf) has an extra network adapter with Panda something... (can't add image before my account is verified :/ )
So I google'd that and came on Panda security [profanity removed].. It might be related, I'm not sure.
I can't uninstall the drivers, I can't disable the drivers, I have rebooted, I've done system restore, that did nothing to the problem, and Acer doesn't provide any driver information about this computer anymore (feel free to look) so I'm not sure what driver
I could try to install..
In my humble proffesional opinion, this is something software related, maybe something about the panda software thing that's getting in the way, perhaps malware.
Any help/ideas are welcome!
Thanks in Advance,
Maarten De Vos

You need to update the network driver.
Visit the website of the manufacturer to download and install the latest compatible driver.
S.Sengupta, Windows Entertainment and Connected Home MVP

How to recover Windows Vista on Satellite A210?

My friend bought Thoshiba Satellite A210. The machine is running slow, so he wants to reinstall Vista.
Can we recover it from hard drive?
He does not have any CD coming with the laptop.
Thanks.

The A210 was definitely delivered with the Toshiba Recovery DVD which would help you to get the notebook back to the factory settings.
As far as I know the A210 was not equipped with the HDD Recovery option and therefore the Recovery DVD should be in the package.
If you dont have the Recovery DVD anymore, then you could order it here:
https://backupmedia.toshiba.eu/landing.aspx
Bye

Burned CD yesterday, can not burn today. Error 4280 - Windows Vista

Yesterday, I bought a number of tracks and albums from the iTunes store. Before I purchased them, I created a test CD with some tracks I already ripped from CDs I own. I burned this CD through iTunes. All seemed well.
I bought my music. After, I also backed up my purchases using iTunes. Still, all seemed well.
Today, I tried to create audio CD with the tracks I purchased from the iTunes store. It did not work.
It seems that the error (4280) comes up a lot, but in relation to Sony drives. My drive is not made by Sony.
Anyone have any ideas on how to solve this?
Diagnostics:
Microsoft Windows Vista Home Edition Service Pack 1 (Build 6001)
GBT_ GBTUACPI
iTunes 8.0.1.11
QuickTime 7.5.5
FairPlay 1.0.15
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.1.13
Bonjour 1.0.5.11
iTunes Serial Number B7AD5D81210AD3E3
Current user is not an administrator.
The current local date and time is 2008-10-14 09:50:15.
iTunes is not running in safe mode.
Video Display Information
NVIDIA, NVIDIA GeForce 7600 GT
** External Plug-ins Information **
No external plug-ins installed.
** CD/DVD Drive Tests **
No drivers in LowerFilters.
UpperFilters: GEARAspiWDM (2.0.7.5),
G: LITE-ON DVDRW SHW-160P6S, Rev PS0A
Audio CD in drive.
Found 25 songs on CD, playing time 52:14 on Audio CD.
Track 1, start time 00:02:00
Track 2, start time 00:21:59
Track 3, start time 01:15:10
Track 4, start time 02:07:35
Track 5, start time 03:09:32
Track 6, start time 06:00:56
Track 7, start time 07:42:21
Track 8, start time 08:59:27
Track 9, start time 11:53:25
Track 10, start time 12:16:55
Track 11, start time 14:15:44
Track 12, start time 20:17:12
Track 13, start time 23:44:05
Track 14, start time 25:45:70
Track 15, start time 26:08:02
Track 16, start time 26:30:32
Track 17, start time 31:00:10
Track 18, start time 31:57:05
Track 19, start time 37:03:25
Track 20, start time 39:36:13
Track 21, start time 40:39:48
Track 22, start time 42:51:45
Track 23, start time 46:11:23
Track 24, start time 47:28:63
Track 25, start time 50:57:25
Audio CD reading succeeded.
Get drive speed succeeded.
The drive CDR speeds are: 4 8 10 12 16 24 32 40 48.
The drive CDRW speeds are: 4.
The drive DVDR speeds are: 4.
The drive DVDRW speeds are: 4.
The last failed audio CD burn had error code 4280(0x000010b8). It happened on drive G: LITE-ON DVDRW SHW-160P6S on CDR media at speed 8X.

Failed while scanning for CD / DVD drives, error 2380.
Error while opening iTunes CD driver. This could be caused by a corrupted iTunes file or a conflict with other older CD burning applications, either currently installed or previously installed and uninstalled incorrectly.
what has been working for folks with the 2380s on 64-bit systems (it can hit XP too) has been reinstalling the 64-bit version of the GEAR drivers that iTunes uses for burning and importing.
GEAR drivers are available from the following page. (note that there are two different 64-bit versions. be sure to get the one that matches your hardware.)
GEAR drivers

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on T61/T61p

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD. This information can help address blue screen errors specifically related to Turbo Memory, but may not solve errors related to other issues. Please read through the instructions completely, make sure they apply to your system, and after attempting the solutions please post back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad T61/T61p (14.1 inch widescreen with IEEE 1394 model) - BIOS version 1.22 (7LET52WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Message Edited by Tim_Lenovo on 11-30-2007 07:03 PM
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Thanks Tim,
I do have my T61p fully up-to-date to the latest drivers and updates (via System Update and the Drivers&Software web page when the former is not that up-to-date).
At the moment the most recurrent problem is this:
http://forum.lenovo.com/lnv/board/message?board.id=T_Series_Thinkpads&thread.id=55
which has been longly speculated here:
http://forum.thinkpads.com/viewtopic.php?t=47755
My other angst is the boot-time chkdsk hang-up problem:
http://forum.thinkpads.com/viewtopic.php?t=52765&highlight=chkdsk
I just wonder if this purely a Vista issue when using NV cache, the disk spinning down at almost exactly 1 hour from the beginning of the chdsk operation seems too much of a coincidence.
This is my T61p configuration:
Intel Core 2 Duo T7700 2.4GHz
BIOS version 1.26-1.06
4GB RAM 2 SO-DIMMs
nVidia Quadro FX 570m with 512MB VRAM
WUXGA LCD
Seagate 7200.2 160 GB
4GB RAM 2 SO-DIMMs
Windows Vista Ultimate 32bit (waiting to move to 64bit)
thanks,
andrea
Message Edited by abarbieri on 12-05-2007 03:48 PM
T61p - 15.4" - T7700 - FX 570M 256MB - 4GB RAM - ST916023AS - 4965AGN - BT - FPR - 9 cell - Vista Ult. x86
T21p - 14" - PIII 850MHz - S3 Savage/IX 8MB - 512MB RAM - 100GB 7200rpm - WinXP x86

Tips for blue screen (BSOD) errors with Windows Vista and Intel Turbo Memory on X61/X61s

Important note: The symptoms and solutions described below address only a small subset of the possible causes for blue screen errors, aka BSOD.
This information can help address blue screen errors specifically
related to Turbo Memory, but may not solve errors related to other
issues. Please read through the instructions completely, make sure they
apply to your system, and after attempting the solutions please post
back with your feedback for the community.
Some users may experience random blue screen errors with ThinkPad
systems running Windows Vista with Intel Turbo Memory hardware. These
blue screens may occur during normal usage on the system or they may
occur when booting into Windows Vista. Blue screens related to the
Intel Turbo Memory hardware may reference a stop code of 8086 with
memory address locations of {0, 0, 0, 0}.
There are two main steps that you can take to help resolve blue screen issues related to Intel Turbo Memory.
Step 1: Update Intel Turbo Memory Driver
If the driver version is before version 1.0.1.1004-7.0.3.1001, please
update to this version.
To determine what version of the Intel Turbo Memory driver is installed:
1.    Click Start, then click Control Panel.
2.    Click System and Maintenance.
3.    Click System.
4.    Click Device Manager.
5.    Expand the Storage controllers category.
6.    Double-click Intel Flash Cache Logic Chip.
7.    Click the Driver tab. Then you will see the driver version (for example, 1.0.1.1004).
The new driver and installation instructions can be found here.
Note: The Intel Matrix Storage Driver is updated with this package.
Step 2: BIOS version
If your BIOS version is older than those listed below, please update to the version listed.
How to check your BIOS version:
Turn off the system.
Turn on the system.
While the To interrupt normal startup, press the blue ThinkVantage button message is displayed at the lower-left area of the screen, press the F1 key.
The
BIOS Setup Utility menu will be displayed. If you have set a supervisor
password, the BIOS Setup Utility menu appears after you enter the
password.
Check BIOS Version and Embedded Controller Version.
Turn off the system.
System BIOS versions:
ThinkPad X61 or X61s - BIOS version 1.06 (7NET25WW)
Please
remember that these updates do not solve every possible system blue
screen, but they do resolve several problems related to the Intel Turbo
Memory driver.
Tim Supples
Lenovo Social Media
Got a question? Don't PM me, post it on the forum!
Lenovo Blogs
X60 Tablet SXGA+ primary, Z61p fully loaded workhorse

Dear Tim,
First off, many thanks for the tips for resolving BSOD with Vista + Turbo Memory on X61. I've been suffering from this BSOD for countless times since I bought in my X61 7673-CW9 in April 2008.
Even prior to having the pleasure to visit this wonderful forum, I followed both steps as indicated, and updated my Intel Turbo Memory driver to 1.5.0.1013 and my BIOS to 7NETB4WW (2.14). However, the BSOD recurrs.
For the past two months, I've recovered my system to factory default settings using Rescue and Recovery for over twenty times, each time with the latest Intel Turbo Memory driver and BIOS. Notwithstanding that, BSOD recurrs.
During these painful experiences, I tried two options: 1) making my X61 up-to-date by using System Update and Windows Update (including Vista SP1 or excluding Vista SP1); 2) keeping my X61 the status as factory default (i.e. without updating through either System Update or Windows Update (the automatic/scheduled update function of both is turned off)). In either case, BSOD recurrs.
I'm 100% positive that the BSOD does not arise from any hardware or software/firmware I install. I never install any hardware (e.g. RAM). And, it is not caused by any software/firmware I install: the clear and unequivocal evidence is that at one time,I encountered BSOD while having restored back to factory setting and booting for the first time.
I live in Taiwan, and I seldom heard this BSOD here.  All of my friends (as most of Taiwan residents) using X61 operate in Traditional Chinese environment, whereas I operate in English environment. In Taiwan, when booting for the first time after purchase/recovery, the Windows Vista Business system provides for lanuage choice (Traditional Chinese or English), and, once chosen, the language cannot be altered later on (unless, of course, the system is restored back to factory default settings).
My system specs are the same as the day I purchased it and are listed below (as I'm not sure if my machine type X61 7673-CW9 is applicable outside Taiwan):
Processor: Intel(R) Core(TM)2 Duo CPU T8300 @ 2.4GHz
Memory: 1.00 G.B.
System: Windows Vista Business (32-bit)
Hard Drive: 160 G.B. @ 7,200 r.p.m.
And, of course, with Intel Turbo Memory 1 G.B.
I contacted the Lenovo support staff here in Taiwan for countless times, but they seem to be clueless. I learned that some friends at this forum downgraded their OS back to Windows XP, but I chose not to. The reason is simple: my purchase price for X61 7673-CW9 includes the Intel Turbo Memory, which cannot function under Windows XP (at least so far).
Therefore, I just wish to share my experience here and perhaps I can get some advice from you and other friends here. Any advice will be tremendously and enormously appreciated.
Kevin Chen @ Taiwan

Recover Window Vista

Hello.
I have an laptop Lenovo N500 and I want to recover the original OS from Lenovo special partition.
On the laptop it is right now installed another Window Vista (not the original) and i don't have any drivers or lenovo care software installed. In my computer there are 2 partitions SERVICEV003 (D and Lenovo (E. I read that in those partitions are the recover files.
What should I do to reinstall or recover the original Window Vista from those partitions. I have tried by pressing F10 on boot loading and i got a black screen Edit Boot Options with these messages
Edit Window boot options for: Microsoft Windows Vista
Path: \Windows\system32\winload.exe
Partition 2
Hard disk: 3ad....
[/NOEXECUTE=OPTIN
I don't have any recover dvd, just that 2 partitions. Can I reinstall the original Windows?

Welcome to the forums
Since you have installed another copy of vista,i am not sure whether you will be able to recover your OEM version.The best option might be to contact technical support and explain your situation,ask them for a recovery DVD set for your model.
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Re: How can I Install Windows Xp in Satellite A200 1M7 PSAE3E?

Hi,
I am having a Toshiba Laptop Satellite A200 1m7 PSAE3E, while I am trying to Install windows XP on the laptop, its showing no hard disk installed. Can I get the *Raid* for the laptop? so that I can customize windows XP and detect the hard disk to Install it.
Thanks in Advance.

> while I am trying to Install windows XP on the laptop, its showing no hard disk installed
You have to install the SATA drivers!
The notebook supports the SATA controller and the drivers are not a part of the Windows OS!
The SATA drivers are in the Intel Storage Manager!!
Read some threads here regarding this theme to get more details!! There are a lot of threads!
> Can I get the Raid for the laptop?
No because the notebook does not support RAID controller.

Error with windows vista but not xp

Hi there all,
IT have recently changed my computer to Windows Vista from XP.
i have lots of reports that were created pre transfer and they now dont work in vista.
it seems to be a common problem when a report containts "Date Job completed" it returns an error of "ERROR DURING SQL EXECUTION DA0003" so i assumed it must be a time out error and ameded the times in regedit.
however it still doesnt work. i cant see it being a date format as a simple report that contains "date job raised" works. its just these other date ones!
can anyone shed any light on the problem im experiencing? IT have now given me my old computer back to fix the problem but im gonna need to go back to the new one again soon!!
also, i assume it must be a setting somewhere that needs changing!?!?
thank you
sam
p.s. i use desktop intelligence XIR2.

Hi Samantha,
Are you getting the error message while accessing deski through infoview or just local deski.
If it is deski through infoview, Can you please let me know which version of Internet Explorer you are using.
You can try the below steps to increase the timeout of IE in your machine and then test the report.
Now, here are the steps to increase the IE7 timeout-
Backup of your registry settings, before making any changes.
Add a ReceiveTimeout DWORD value with a data value of (<number of seconds>)*1000 in the following registry key:
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings
For example, if you want the timeout duration to be 8 minutes, set the ReceiveTimeout data value to 480000 (<480>*1000).
Restart your computer.
Repeat all of the above steps on every computer that uses IE 7.
This particular error message appears because of the Timeout setting in Microsoft Internet Explorer 7. By default, IE 7 has the timeout of 30 seconds.
Also, here is the link from Microsoft which identifies the issue-
http://support.microsoft.com/kb/181050/en-us
Lets hope this resolves your issue.
Regards,
Gaurav

IPod Shuffle Error (-48) : Windows Vista

Hoping someone can help with my predicament here:
I have Windows Vista Ultimate and the most recent version of iTunes. I bought the shuffle new about 2-3 months ago. When I connect my shuffle it always gives me the error in the screenshot below and prompts me to format the device as well. It will also do this each time a song changes if I am listening to the songs on the iPod through iTunes. When transferring songs to the iPod it prompts me with these pop-ups for each song that is loaded.
I have tried to search for that error code and have not had any luck. Has anyone run into this issue before.
All software is up-to-date: Windows/iTunes/Shuffle Firmware
Thanks for any feedback!
Here is a screenshot of the errors:
http://www.drunet.org/images/iPod-Shuffle-Error48.png

Hi, I would suggest you to try Temporarily changing the Time Zone setting and then Open the latest version of iTunes and Restore your iPod. After successfully restoring your iPod, change the Time Zone back to your normal setting.
Hope this works.

Error 2330, Windows Vista - Can't uninstall or Reinstall ITunes

Itunes was working fine for quite awhile, but now when I access the store to download another song the store shows up but almost immediately blanks out to a white screen with only header info on it, no details.
When Itunes starts up, I get a message saying that there is a problem with the installation and CD downloads will not work.
I have tried reinstalling Itunes and Quicktime from the apple website. Also, uninstalling both from the Windows control settings. QT gets uninstalled and reinstalled fine. I get error 2330 with no other information when trying to reinstall or uninstall Itunes.
Have tried clearing out the TEMP folder and also doing selective startup as directed on the apple help tips. Still no luck.
Does anyone have suggestions how to resolve the 2330 error and why I am getting it?
THANK YOU !!

I had this same issue with the iTunes store loading then going to a blank white screen straight after. I then checked for updates, installed everything it told me to (Safari, Quicktime, iTunes). However after everything installed it cut my internet connection. I was able to browse the internet for about a minute before I completely lost my internet connection.
I called my router manufacturer, they could not resolve my issue as the other PC's could access the internet so I knew it was iTunes/Safari/Quicktime. I did a system restore (I am using Windows Vista), that did not work. I searched on the other PC for help and found somewhere to uninstall network adaptors under the device manager. That just took away all my applications that pointed towards the internet so I did another system restore to bring them back, but this however fixed my issue. I did have to re-access my router from my computer by prompting it to reconnect to my ISP and then I got my internet back.
But, I can't access my iTunes or listen to my music.

New Install Error on Windows Vista

On a new install I am getting this error when I try to request license.
I am trying to install it locally on a new Windows Vista machine.
Server Error in '/B1WebTools' Application.
Object reference not set to an instance of an object.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.NullReferenceException: Object reference not set to an instance of an object.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[NullReferenceException: Object reference not set to an instance of an object.]
   netpoint.LicenseRequest.Page_Load(Object sender, EventArgs e) +266
   System.Web.Util.CalliHelper.EventArgFunctionCaller(IntPtr fp, Object o, Object t, EventArgs e) +14
   System.Web.Util.CalliEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +35
   System.Web.UI.Control.OnLoad(EventArgs e) +99
   System.Web.UI.Control.LoadRecursive() +50
   System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627
Version Information: Microsoft .NET Framework Version:2.0.50727.3074; ASP.NET Version:2.0.50727.3074
Has anyone seen this before?
Edited by: Brett Flake on May 28, 2009 9:31 PM

And how can I uninstall it from a Creative Suite ??
And how can I install then the next full version "directly"??
And I don't really understand.
Adobe Updater cannot install this update, and tries it again after a month, it is downloading this update once in a month, and when it fails, closes itself, and says sorry, see you later in november? And when it fails, I cannot say, please stop bugging me with this.
Almost the same problem with the Adobe Media Player, which cannot play even the files advertised in its own browser, : adobe trainings from adobe related sites, and cannot update itself. It's almost brutal. How does this happen?

Disk errors in Windows Vista

I have new Fujitsu Notebook running Windows Vista home premium. Everytime I plug in my iPod to sync it, I get an error window saying that I need to scan my drive for errors. It does not restrict access to my iPod in iTunes but it does slow the sync process. I am running version 7.3.2.6 of iTunes and version 1.2.1 on my 5th gen with video. I usually tell the computer to ignore the error and have no problems. I have run the scan on the iPod with negative results(still get error and no errors were found.). I also checked and my copy of Windows Vista is current and updated. Is there a patch for this problem or do I just have a mutant laptop??

Hello mludwin
Check out the article below to troubleshoot your issue with syncing your Contacts and calendars to your iPhone, using Outlook. It will have some options to reset sync history and disabling any conflicting any Outlook add-ins.
Troubleshooting Sync Services on Windows with Microsoft Outlook 2003, Outlook 2007, or Outlook 2010
http://support.apple.com/kb/ts2776
Regards,
-Norm G.

LV8.5.1 Labview memory is full error message Windows Vista 64bit

I have a small application where the top level vi will no longer load into either LV8.5.1 or LV8.6 (see attachment) when using the project exployer. Anyone else have this problem?
Hardware:
ASUS G1 4Gig memory
Windows Vista 64bit
Regards,
Karl
Attachments:
LV load error code 14.jpg ‏24 KB

Hi Jon,
Here is the code,
Regards,
Kal
Attachments:
SUbvis.zip ‏499 KB

Secutiry error in windows vista gadgets

Hi everybody,
I'm trying to add a flash into a microsoft windows vista
sidebar gadget and I get the following security error :
SecurityError: Error #2060: Security sandbox violation :
caller ExternalInterface
http://test_server/player/widget.swf cannot access
x-gadget:///index.html.
at flash.external::ExternalInterface$/_initJS()
at flash.external::ExternalInterface$/addCallback()
at
com.acme.project.widgetClass.event::ExternalDispatcher/initExternalInterface()
at com.acme.project.widgetClass.event::ExternalDispatcher()
at
com.acme.project.widgetClass.controller::PlaylistController()
at com.acme.project.widgetClass::CarouselPlayer/initialize()
at com.acme.project.widgetClass::CarouselPlayer()
at
com.acme.project.widgetClass.application::BaseApplication/attachPlayer()
at
com.acme.project.widgetClass.application::WidgetApplication()
at widget()
My flash needs to download different files (pictures, music,
video) from the server where it's hosted and interracts with the
gadget (html pages) via javascript.
I tried to add a crossdomain.xml file and to set the
'allowScriptAccess' to 'always' but with no success so far...
Here's how the flash is added into the gadget :
var div_id = "playerDiv";
var fo = new FlashObject(
http://test_server/player/widget.swf,
"flash_movie", "262", "265", "9", "#FFFFFF");
fo.addParam("menu", true);
fo.addParam("allowScriptAccess", "always");
fo.addParam("allowNetworking", "all");
fo.addParam("allowFullScreen", "true");
fo.addParam("wmode", "transparent");
fo.write(div_id);
Thanks in advance to anyone who could help me,
Cheers,
Vincent

Does anyone have any idea on this? I have upgraded to the latest version, still a problem...

Drivers error recovering Windows Vista on Satellite A200

Similar Messages

Maybe you are looking for