Drivers for Canon BJC-1000 printer

I have a very old printer Canon BJC-1000. I understand that Canon do not have drivers for Mac OS and Apple is using Gimp-Print 5.0.0 beta2. However, my prints are all black and white despite I am using a colour cartridge. Is there a ny better driver?. I would like to try the latest release of drivers from this third party company: Gutenprint 5.0.0 cr2... will it work?
Any help will be much appreciated...

"will it work?"
Try it and find out.

Similar Messages

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

Downloaded Canon printer/scanner drivers for Canon PIXMA MP520 and MX860 on Mac Book laptop, and they worked. However, when I downloaded the same two drivers on Mac Book Air, neither worked.

I wasn't aware that VueScan charged a yearly license.
You simply launch Image Capture and if the scanner is recognized it will be listed in the SHARED list in the left display column. Select the scanner name and the app will start an overview scan. You will also see a list of scanning options in the right display column (resolution, paper size, file output format, etc.
The above description is when everything is working correctly, which has been the case for me.
Good luck.

Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?

Just upgraded to snow leopard, downloader apple support drivers for canon mp620. Why won't a printer list display in add printer window?

Assuming the MP620 is connected to your wireless network, then there are two components to this device - the printer and the scanner. The printer uses Canon proprietary software while the scanner is supported by Apple's Bonjour service. So in many cases, you will at least see the scanner, shown as Bonjour Scanner in the Kind column, while the printer can take longer to appear and is shown as canonijnetwork in the Kind column. If you cannot see either then you have a network issue. Try turning off the MP620 for a minute and then turning back on. Then see if the scanner / printer component appears in the Add Printer window. If you still don't see either, then confirm the MP and the Mac are using the same network. If you know the MP's IP address you can use Network Utility to Ping the address. You can also enable Bonjour Bookmarks in Safari preferences and when selected, the MP620 should appear.

Apple 's new drivers for Canon printers

Apple has just released new drivers for Canon printers. I have an i9900 inkjet printer which is not listed in the supported printers. Will the driver work for me or am I out of luck?
Thanks.

The driver update is supplied to Apple from Canon, who has made the decision to end support for the i9900. They actually ended support several versions previously.
So to print from Mavericks to the i9900 you can download and install Gutenprint v5.2.9 which lists the i9900 as a supported device.

OSX 10.9.1, will there be drivers for a Cannon MP800R printer

I can't find any drivers for a Cannon MP800R Printer/Scanner for use with OSX 10.9.1, does anyone know if these will be available.
The printing with the previous drivers produce striped printouts.

Bobster16, to answer to your question, there will not be any update from Canon for your printer drivers (see there : http://www.canon-europe.com/Support/Consumer_Products/operating_system_drivers/).
However, I also have a Canon MP800R printer and I found a solution on my own iMac, working under OSX Mavericks (10.9.1).
I first installed the following drivers and softwares from Canon website (although said not to be supported by Mavericks) :
Canon IJ Network Tool : mnt_-mac-4_2_0-ea11
MP Navigator v. 2.1.3 : mpnosx213ej7
MP800R printer driver : mp800rosxcp102620ea8-2
MP800R scanner driver : msd_-mac-mp800r-12_13_3-ej7
Installing those softwares allowed me to configurate the all-in-one printer, by using an USB cable.
In order to operate the MP800R by Wi-Fi, I then used Canon IJ Network Tool (installed automatically in Applications folder). It seems necessary to unable MAC adresses to set up the wireless mode. I had some troubles doing that, don't hesitate to ask for further information.
At that time, I could use my printer, but with some restrictions, e.g. some choices in the printer menu were stroken through. I then download from Canon Website the latest driver for MP printer (MP980 CUPS driver : mcpd-mac-mp980-10_84_2_0-ea13), and installed it. I didn't have to set up anything more, the files for Mavericks had been found by OSX, and everything works correctly now.
Please excuse the possible faults, English is not my mother tongue .

Need to download drivers for canon MP 280 for macbook pro

I need to download drivers for canon MP 280 for macbook pro how do i go ...

Welcome to Apple Support Communities
As you can see, that printer is compatible > http://support.apple.com/kb/ht3669
To get the drivers for that printer, you just have to add the printer to OS X, following these steps > http://support.apple.com/kb/PH11145 OS X will download automatically the driver for your printer after adding it to the printer list. Or you can download the Canon drivers from the Apple website > http://support.apple.com/kb/DL899
You don't need to get drivers from the Canon website. The Apple drivers are sufficient to make the printer work, although you may find software in the Canon website that you may want

Drivers for HP Laserjet P1007 Printer

I have not been able to get the Drivers for Hp Laserjet P1007 Printer loading into my iMac Desktop.
HP sites dpo not open up for my required queries
thanks
s.s.kulkarni

Hi.
Follow these steps to install the printer:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435678/model/3435679/document/...
Basiclly you would need to turn the printer on and connect it to your Mac.
From the Apple Menu click on Software Update and install the HP Printer Drivers v3.0.
Next the printer should appear under Print & Scan, if it isn't click the plus sign and add it.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Canon BJC-6200 Printer Drivers

The Canon website only has drivers for OS 8 - 9.2 for the BJC-6200. I need the 10.4 drivers.
An article on the Apple website states: "All included printer drivers are installed by default when you install Mac OS X 10.4." When I tried installing the drivers for my Canon BJC-6200 from the hard disk, it produced an error after about 10 seconds and asked me to re-try. I did, but it failed again.
I then read this in the article: "If you would like to install any of the optional printer drivers after installing Mac OS X, insert the Install disc into your computer and use Optional Installs." I tried installing the drivers off my Mac Mini Install Disc 1, from the Optional Installs folder, but there were zero bytes in the Canon folder and the message came up with something like "There is nothing to install".
Is there any way I can get the drivers for 10.4?

Hi cwp1,
Maybe that's because you already have the driver on your mini? Did you try to add this printer and select the Canon BJC-6200 driver in the list? I have that driver on my mini and I never installed it...
How is your printer connected?
Does your mini see that printer?
Guylaine

Snow Leopard : print drivers for Canon PM620

I have just installed Mac OSX Snow Leopard and cannot now use my Canon MP620 printer. I have tried reinstalling it but it continues to tell me that I need to install the print driver software or contact Canon. I have tried to contact Canon and download any print driver for the MP620 that is compatible with Snow Leopard. Their is not a new print driver available from Canon or Apple !!!!! Apple state in their literature that Snow leopard will make sure that the most up to date software is available. Unfortunately the most up to date software is not compatible with Snow Leopard. Considering this particular printer is available on the apple store with a 3.5 star rating I wonder what apple intend to do about this problem? Which printers do work ? I need a printer urgently. Any suggestions out their .cm

HI and welcome to Apple Discussions...
Sorry to hear you are having problems with your printer.
Just so you are aware. It is not Apple's responsibility to update 3rd party software such as printer drivers. This holds true for the hardware sold at the online Apple store. That is up to Canon to update their drivers to be compatible with 10.6.
Also, if you have any 3rd party software, not just drivers for printers that you have on your Mac, Apple is not responsible for updating their software either.
*"Important: Mention of third-party websites and products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Apple assumes no responsibility with regard to the selection, performance or use of information or products found at third-party websites. Apple provides this only as a convenience to our users. Apple has not tested the information found on these sites and makes no representations regarding its accuracy or reliability. There are risks inherent in the use of any information or products found on the Internet, and Apple assumes no responsibility in this regard. Please understand that a third-party site is independent from Apple and that Apple has no control over the content on that website. Please contact the vendor for additional information."*
From here:
10.6 Incompatible Software
Check Epson for printers. They have already updated most of their models to be 10.6 compatible.
*"Apple state in their literature that Snow leopard will make sure that the most up to date software is available."*
They are referring to the Mac OS X system software. Not 3rd party software. "Snow Leopard" ...
Carolyn
Message was edited by: Carolyn Samit

Cannot find drivers for HP laserjet 1000

for the love of GOD, can someone tell me why this is so difficult?
I'm on OSX 10.6.8 and the one printer that apple did not install drivers for is the one I am using: HP LASERJET 1000.
I have scoured the forums, and the queries that have been answered date back to four years ago, with the referenced links leading to non-existent sites.
Finally, I found some information.
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
What, pray tell, do I need to do to print something? Why is this so difficult?
Please help save a human life today; give me the answers.
It's good karma
PS: contrary to my product listed, this matter concerns an iMac, not a macbook pro. thanks!

Joni Chacho wrote:
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
That page is an old page. It should have redirected you to http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic .
Message was edited by: Matt Broughton

Drivers for Canon MF4150 and Epson SPR320 won't load (used to be there)

I recently reinstalled my system software for other reasons. Now, I can not print to the above mentioned printers because there are no drivers associated with them. I have downloaded and installed the drivers for both printers three times but the computer does not recognize them. Any ideas?

With regards to the Canon MF4150, the driver installer will add the files to ./Library/Printers/Canon/UFR2. If the printer is connected to the Mac via USB then the software should automatically select the correct printer model when you select to add it via the Default browser view. If the printer is connected to your Mac via some other means, then the UFR2 driver software can have problems with determining the printer model and will either add a generic UFR2 model or not create a printer queue at all.
Could you explain how you have the printers connected to your Mac?
PaHu

I am looking for a driver for a BJC-420J PRINTER

I am looking for a driver for a BJC-420J PRINTER

Hi dad,
Drivers for Windows 7 are not available for this model. While considering the desire to provide the best possible support for Canon's current products, Canon must make decisions on which products to support when new operating systems are introduced. These decisions are generally based on the age of the product and the number of product estimated to be still in use.
Since your device is not supported under the current operating system, you are eligible for Canon's Loyalty Program. This option allows you a one-time opportunity to purchase a new or refurbished product that uses Canon’s next generation technology and carries a limited manufacturer’s warranty. To help you get up and running quickly, we also offer free ground shipping (if the order is completed by 4:00 PM EST). If you would like to take part in this option, please call our Sales Department at (800)OK-CANON (800-652-2666) seven days a week, 8am to Midnight.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

PKGBUILD for Canon Pixma iP1500 Printer

Hi, I'm not sure if this is the correct place, maybe the forum needs a "AUR Packages release" section?
I wrote a PKGBUILD to this printer and I know that it's very difficult to find this driver, and it even can be easily modified to get others similar Canon printers working so I post it here.
I uploaded to AUR http://aur.archlinux.org/packages/pixma … 0/PKGBUILD

Glad to help the Arch community the same way you had helped me
@ Chris|MD: When I was searching how to get working mine, I read on Gentoo Forums that someone got the iP2000 working with the Canon BJC-7100 foomatic driver (foomatic package it's in extra repository). You can try that and see if works for you.

Firewire drivers for Canon i9900???

I had firewire drivers for my Canon i9900 for Leopard (10.5) but upon upgrading to Snow Leopard (10.6) the Mac wouldn't see the printer anymore. I read someone mentioning to try a USB cord for someone in the same situation and, presto, the Mac saw it -- but I prefer using the firewire port (if only to free up a USB port).
Isn't that standard to include firewire support in the drivers? Do I need a special driver?

Update: 10/08/09
FW driver causes printer to hang endlessly without apparent reason. Print cue will show "printing" but nothing happens. Turning the printer off and on again, sometimes several times will usually get it to finally print.
Neither the FW or USB drivers seem to support edge to edge printing anymore, a feature Canon bragged about on this printer and one I depend upon; Letter Extra and Tabloid Extra have disappeared from the dialog box and choosing borderless printing has no affect and the extent slider is grayed out. Furthermore the non-print area around the paper edge seems to have gotten wider with these new drivers, all and all making this printer next to useless to me. Is this Canon's way of telling us they don't really support this printer anymore?
I'm back to the USB driver, which at least prints, after I watch the spinning beachball for 20 seconds. Anyone figured out how to get edge to edge to work?

Drivers for HP laserjet 1020 printer for Macbook Pro OS 10.10.1?

Like to install drivers in OS 10.10.1 for HP laserjet 1020 printer. When checking on App Store updates I cannot find anything. Where do I find the driver? Thank you

Hi @LGolf ,
I see by your post that you are looking for drivers for the Laserjet 1020, for 10.10.1. I would like to help you.
Unfortunately the Laserjet 1020 is not supported on a Mac operating system.
Printer Specifications for HP LaserJet 1020 Printer Series.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Drivers for Canon BJC-1000 printer

Similar Messages

Maybe you are looking for