Drivers for DS-8A5LH DVD player on Pavilion dv6-6153cl

My Laptop Pavilion dv6-6153cl doesn't recognize the Dvd
DS-8A5LH.  It is in the
Bios but not in Registry or Device Manager
It powers up when a cd or dvd is inserted.  I want to get the drivers for the DVD

Windows 7 or Windows 8? There is no driver to give you but it sounds like you need to do the "remove upper and lower filters" repair.
http://support.microsoft.com/kb/314060
Be sure and click the plus signs on all the steps to see all the steps. The "autofix" is a good start but I find the manual registry edit works better.
If this is "the Answer" please click "Accept as Solution" to help others find it.

Similar Messages

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • Exported slideshow from Iphoto11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine but show stops 1/2way through because DVD has 2 chapters. How do I eliminate chapters?

    I exported slideshow from Iphoto 11 to IDVD 7.12 so I could burn DVD for play on DVD player. Fine, but then when playing on DVD player show stops about 12 way and starts over. Seems there are 2 chapters in show. I wan t show to play straight through until end. How do I elimiante chapters or solve problem. Thanks. Bob Low

    Try this workflow:
    Once you have the project as you want it save it as a disk image via the  File ➙ Save as Disk Image  menu option.  This will separate the encoding process from the burn process. 
    To check the encoding mount the disk image and launch DVD Player and play it.  If it plays OK with DVD Player the encoding was good.
    Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality.  Always use top quality media:  Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    Play the disk image with DVD Player and see if you get the same start over half way thru.
    Did you create the slideshow in iPhoto in the slideshow mode?
    or were you in an album and then used the Share ➙ iDVD menu option?  What I'm trying to find out is if the slideshow in iDVD is a movie file or an iDVD slideshow with the photos from iPhoto? If it's the latter how many photos in the slideshow?
    OT

  • Urgent! Anyone know the specs for creative slimline dvd player

    Anyone know where to get the specification for creative slimline dvd player? I cant find the information at the creative website.
    Message Edited by keetech on 03-08-2005 04:24 PM

    keetech,
    Glad to hear that you enjoy the Fest.
    Jason

  • Vista has no drivers for MacBook Pro DVD drive

    When I boot into Vista, everything works well enough but I can't use the DVD drive on my MacBook Pro. Under the device manager it's listed as not having drivers and when you tell it to find them on the internet, it comes up empty handed.
    Anyone know where I can find drivers for this drive? It's a Matsushita UJ-857D.

    I've been having the same problem. THere was a discussion with a link that no longer exists.

  • "Ghost files" when exporting to CD for PC or DVD player

    I'm exporting my photos from iPhoto and then burn them to a CD (for friends that are using PC or want to watch them on their DVD player) ghost files appears like duplicates. So if I burn 100 images it will be 200 when opening on a PC or on a DVD player.
    I tried it on my Xbox360 and the same thing appears.
    Is there some way to get around this?
    PB 12" G4 / Mac mini intel core duo Mac OS X (10.4.7)
    PB 12" G4 / Mac mini intel core duo   Mac OS X (10.4.7)  

    The "extra" file is probably an icon (resource fork file).
    These resource files are only used by the Mac OS and can be removed from the image file prior to burning the PC CD.
    I've been using Grim Ripper for years:
    http://free.abracode.com/cmworkshop/grim_ripper.html

  • HiFi for use with DVD Player?

    I am considering purchasing the HiFi for use with my Ipod but also as a placeholder for a speaker system to be purchased later. I want to use it with my DVD player to watch movies using the audio input port on the back.
    I have read that one can do this, but have not been able to confirm that it is possible. If so, what cables would I need and has anyone tried it to see how she sounds?
    Thanks,
    iMac G5   Mac OS X (10.3.9)  

    Yes, it proves in my case, there are 2 ways to do it i.e. analogue or digital. I suggest that you should try the analogue first, you need an audio cable - one end is RCA for connection with the DVD and the other end - Minijack to iPod HiFi.
    Of course, you can connect with an optical toslink cable which sounds better - you can have a look of this cable, but you need to add the mini adapter which should included
    http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore?productLearnMore=TL9 55LL%2FA

  • Convert iMovie Project to NTSC for Viewing on DVD Player

    I have been trying to find some application (relatively cheap) that will convert an iMovie project to NTSC.  I found one on line for $30, but didn't know if anyone had suggestions for a cheaper solution that is realiable.  Thanks
    PS - If iMovie can do it, PLEASE let me know how because I have looked and I haven't found anything that will let me burn in DVD player format.

    Hi
    PAL to NTSC or NTSC to PAL
    A. Copying commercial DVDs - No Not possibly at all - Not even legal to discuss.
    B. Home made DVDs (DVDs without copy protection)
    C. Movies from iMovie or FinalCut
    • Save as full quality QuickTime .mov and convert this with JES_Deinterlacer  (free on internet)
    NTSC ---> PAL.
    • Most often not necessary - Most stand alone PAL DVD-players playback NTSC
    (if TV is old in BL/W)
    PAL ---> NTSC.
    • If played on Mac - not necessary AT ALL
    • If on NTSC DVD-player - CONVERSION IS NEEDED - nearly no Stand alone NTSC-DVD-players
    playback PAL at all.
    To do this You need to convert the PAL DVD to streaming.DV or full quality QuickTime .mov
    • I use Roxio Toast™ to do this (There are no free converter)
    • JES_Deinterlacer  (free on internet) to convert to NTSC
    • Set up an NTSC project (29.97fps or 30) in iDVD and import then burn
    I burn to
    • Verbatim DVD-R
    • Set down burn speed in iDVD to x1 or x4 recommended by many
    • Secure a minimum of 25Gb free space on internal boot hard disk before burning (IMPORTANT)
    PAL is 25 fps and an analog TV standard of 625 lines
    NTSC is 29.97 fps and 520 lines
    NTSC (29.97fps) 520 lines - about 640x480 pixels (square) 720x480 rectangular (narrow) pixels
    PAL  (25 fps)   625   lines - about 768x576 pixels (square) 720x576 rectangular (narrow) pixels
    to use a photo 702x480 resp 576 then add 9 pixels on each side to add together as 720
    If iDVD hangs on PAL or NTSC.
    Bengt W wrote
    Deleting iDVD pref. file - should return You into NTSC mode.
    Yes iDVD can switch to PAL - BUT as You see with a rather lousy result. (so will other way around too)
    a. Need to convert to PAL - most often not - Most PAL-player can playback NTSC
    and on a fairly new TV in color. (old TV in Bl/W)
    (Other way around - from PAL to NTSC most often a must - few NTSC-player can use PAL)
    b. IF MUST - then use JES_Deinterlacer to do this conversion - so much better and free.
    My list on this (or rather PAL --> NTSC - just think the other way around)
    Allosaurus writes
    Thank you SDMacuser. I dumped all the plist icons with no result, and was getting pretty plist off when it occurred to me to delete all the previous dvd.proj files. Bingo. That did the trick. So thank you for all your help and the additional information you provided.
    Yours Bengt W

  • HT1926 need to install drivers for cd and dvd burning

    the registry settings used by itunes drivers for importing and burning cd and dvd are missing because of other burning sofeware

    I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
    iTunes for Windows: "Registry settings" warning when opening iTunes

  • Registry drivers for cd and dvd burning missing?

    I have the Itunes 5.0 or whatnot and Everytime it pops up it says the registry drivers for burning cds and dvds isn't working and then it doesn't reconize my Ipod?
    Help?

    You may find the answer here.
    Michael1950, ""Disc burner or software not found" error.", 08:56pm Sep 10, 2005 CDT
    If not, post this in the iTunes for Windows forum, but don't say "I have the iTunes 5.0 or whatnot".
    If you're not sure, it's hard to know how anyone will be!! : )

  • How do I convert iphoto slideshow for playback on dvd player

    how do I convert iphoto slideshow for playback on dvd player

    Roxio's Toast is one such.
    http://www.roxio.com/enu/products/toast/titanium/overview.html
    regards
    TD

  • Putting slideshow on DVD for use in DVD player

    I have a slideshow that I need to burn onto a DVD for use in a regular DVD home player, not in a computer. Can I do this with iPhoto? If yes, how, and if no, then can I use iMovie instead?
    This is urgent!

    Urgent? Then in iPhoto Share -> Send to iDVD. You need to create the actual DVD in that app not iPhoto or iMovie.
    Regards
    TD

  • Drivers for HP60-443CL DVD drive with Signature for Win 8 RP

    How can I get a driver for the DVD drive on HPG60-443CL so the Release Preview of Win 8 will accept the DVD drive?  The drive is a HL-DT-ST DVDRAM GT20L.  THANKS!

    How can I get a driver for the DVD drive on HPG60-443CL so the Release Preview of Win 8 will accept the DVD drive?  The drive is a HL-DT-ST DVDRAM GT20L.  THANKS!

  • Major crash Pavilion dv6-6153cl

    My computer kept crashing to blue screen stating hard disk error repeatedly. I attempted restore points and it got worse, crashing more frequently. I restored it to factory settings. It worked for 2 days, then crashed again...but this time, it won't even open...right to blue screen before it can even finish software installation. Tried several times to restore, same problem. I don't have access to a repair shop since I am living in Costa Rica at the moment....HELP!! Please.

    Sounds like the hard drive needs to be replaced.A retail hdd can be used, and you will need Recovery Disks to get Windows reinstalled. If you are still within warranty period HP will send a hdd replacement.Contact HP
    Enter BIOS setup by tapping/holding the F10 key immediately after powering on the laptop.Use Diagnostics to test your hdd.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • DVD writing speed for home DVD player

    I was just wondering what is the best speed to burn movies for a home DVD player (2x, 8x or 16x). I have heard that you can have problems with a DVD player reading the disk if you burn at too high of a speed. I have 3 DVD players at home with the oldest being 2 years old.

    I don't know about "best" speed. I do know that slower is better, your chances for a compatibility issue increase with the speed you burn. I've had good luck with 8x burns. Any higher than that has been iffy for me.

Maybe you are looking for

  • To complete a workflow manually

    Is there a way to complete the workflow for a particular object id manually so that it does not trigger and its instances does not get executed.

  • How to add a a href="" /a to my textarea

    Guys im using a flex 4.5 to build an application however for the first time ever i came across something i just can't seem to wrap my head around. Typically i wwould use the link button for this but now i actually need to insert a link within text. i

  • Why is Lightroom 2.4 Thumbnail Rendering SLOOOOOOOOW...?

    For some reason Lightroom 2.4 is taking an enormous amount of time to render thumbnail previews and in spite of having my thumbnail cache set to 50 GB, it still re-renders the thumbnails every single time I use the scroll bar. Every other aspect of L

  • How to export an image column from SQL server to an excel

    Hi team, Would like to know how can i get an Image column storeed in SQL Server database to get copied in Excel (Hard Drive). Requirement : Need to get Username, User email address and User photo in to an excel sheet from SQL server database. Fix: I

  • BatchProcessing - Error: 6 Overflow

    Hello everyone, we're trying to use Batch Processing for Dataupload from textfiles to Essbase via FDM. We're encountering a problem as described below. Every hint or advice is appreciated. Thank you in advance. On an additional note: We noticed in th