Drivers for format hard drive of desktop imedia A3523 made in year 2010

Can you please help
I need to down load drivers then burning to disks to reload a formated hard drive, o/s windows 8
( to clean hard drive, load drivers, then re-instll windows 8)
Thank you.
t.j.

As the imedia A3523 circa 2010 originally shipped with WIN7, you have an issue. Do you possess a retail WIN8 or upgrade WIN8?
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine. Do I have to wait for Seagate to update their drivers for this hard drive?

Once I upgraded to ML, I'm now finding that my Seagate Free Agent external hard drive is no longer being backed up by Time machine. Do I have to wait for Seagate to update their drivers for this hard drive?

I tried your suggestion, and it's been giving me the message "Preparing for Backup" for the past 8 hours. Does this mean TM is backing up my hard drive? I'll give it a few more hours, but if nothing else happens, I'm not sure what else to do. I'm not sure if there are any new external hard drives that are compatible with ML yet.

I have a vaio vgn-fz140e i installed a 1tb hard drive i am unable to update windows 7 i need drivers for my hard drive

Hi robman,
Welcome to Sony Community!
Thank you for this message. The model# VGN-FZ140E only supports Windows XP and Vista. We dont have driver updates available for other operating system as of yet.
Jen
If my post answers your question, please mark it as "Accept as Solution"

ONE PARTITION.
You don't need to buy anything but you should have backups.
you can delete #2 you created. Then resize to full drive.
There are already
GPT
EFI
Mac
Recovery
and there needs to be Windows which cannot be higher ID
Reading the instructions first and just swallow whatever pride or inidignation. It is a "my way or highwar" setup and utility,.
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
create a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
Installation Guide Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/

.exe drivers for external hard drives

I just bought a external hard drive case that supposedly supports Macs. However, the driver on the included CD is an 'Autorun.exe' file - there are no included OSX files on the CD. Is there a simple way that I can get this external drive up and running or do I need to run an emulator, like QEMU, and a copy of Windoze? The enclosure is an Eagle/Consus ET-CSWESU2-BK which accepts SATA drives and outputs them thru USB2.0.

I'd just format the drive. (All the .exe will give you is crapware...)
To format it for a Mac, open up Disk Utility (/Applications/Utilities), click the drive (as in the orange icon further to the left than others) and now you have two choices.
1. If you want just one partition, click the Erase tab. Choose Mac OS Extended (Journaled) and give the thing a name. Then, from Security Options choose any of the choices except the first (the 3rd and 4th will take longer but are better, I recommend the third). Finally click Erase and be patient.
2. If you want partitions, do the above, but choose Free Space instead of Mac OS Extended (Journaled). Then go to the Partition tab and do what you want there.

Reinstalling drivers for external hard drives

Seagate support rep says that I need to reinstall the drivers. He thinks they may have been corrupted.
How can I do this? Do I have to reinstall all system software from CD & them all updates?

Only by reinstalling OS X from scratch or by doing the following. Why did they tell you the drivers needed to be reinstalled?
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

SOLARIS OS Support for Advance Format Hard Drives

Hello,
I am fairly new to the UNIX Operating System so I'm hoping that someone can help me. Does Solaris support the new Advance Format hard drives (4k sector boundaries)? I cannot find any mention of the advance format drive in the Oracle literature. I believe, based on my recent reading that Open Source Solaris depends on ZFS to handle the support of the new 4kbyte sector size.
Thank you in advance for any information you can supply.
Steve

Moderator Action:
This post has been moved to the Solaris 10 forum.
@ O.P.,
You originally posted your inquiry to the Clustering forum, which has nothing to do with the topic of disk cluster size.
Glance at the documentation for Oracle Cluster 4.0 to see what clustering is all about.

Formatting hard drive for project compatibility PC /Mac

I'm editing a project for a friend who uses PC. I bought a Lacie Quadra d2 drive for the project. The media files I'm being give are DV and WMV files, which my friend will copy to the drive.
So my question is: Will there be any compatibility issues and is there any way to avoid them?
Should I (or how should I) format hard drive before giving it to my friend? And will I be able to take drive back as is and work with the files?
I appreciate any guidance.

Download this free driver: http://www.ntfs-3g.org/index.html#download and you can format the drive as NTFS, which both of you can read and write.
Once installed, NTFS will appear as a formatting option in Disk Utility.

L305D-S5934 Has formatted hard drive, can I load recovery disk from a different machine?

Hi,
I have an older L305D (can't remember the sub group model, but it does not have the web cam). The LCD screen went out so I bought a L305D-S5934 with a formatted hard drive. I swapped my old hard drive into the new computer, but it will not boot up. It tried to recover, but that failed. Can I make a recovery disk with my old computer to use in the new one, even though they are different sub models? The new computer has a Windows license on it. If I can't make a recovery disk with the old one that will work, can I get a copy of Vista Home and use the license on the new computer to install it or does the license only work with the recovery disks? Once I have an operating system installed, I know I can get the right drivers from this website. Any help/ideas would be appreciated! I would rather not have to buy a recovery disk through Toshiba if I can avoid it.

Satellite L305D-S5934
Can I make a recovery disk with my old computer to use in the new one, even though they are different sub models?
That won't work.
can I get a copy of Vista Home and use the license on the new computer to install it or does the license only work with the recovery disks?
The OEM key won't work with a retail version of Windows. (And with the recovery discs it's unnecessary, because that one is pre-activated.)
The recovery media from Toshiba costs less than the product key for the retail installation DVD. And you don't need to mess around adding drivers and utilities.
Order Toshiba Recovery Media
-Jerry

Recovering data from a newly formatted hard drive

Has anyone had any experience with programs that recover data from a newly formatted hard drive? There seem to be a lot of programs out there to do this, but, a) do they work, and b) which one worked best for you?

Ive had so and so success with a freeware utility called "Recuva"
http://www.recuva.com/
Its from the makers of CCleaner.
*******DISCLAIMER********
I am not an employee of BBY in any shape or form. All information presented in my replies or postings is my own opinion. It is up to you , the end user to determine the ultimate validity of any information presented on these forums.

Advanced Format Hard Drive not recognized by HP DV6000 Controller

Hello,
I have an HP DV 6000 laptop (6276 I think, I'm at work can't check) that came preinstalled with a Western Digital 160gb 1.5gb/s 5400 RPM drive (Vista) that failed a couple of weeks ago. So i bought a Western Digital 750 GB WD Black SATA III 7200 RPM 16 MB drive to replace it. I read about people having some problems with Advanced Drive Format hard drives not being recognized by their controller, but also read that depending on the controller and specific Dv6000 model laptop they had-one wouldn't run into problems.
Well sure enough, when attempting to install Windows 7 I received the error that the hard drive was not detected. After researching online I came across an article on WD's site that noted
"Our SATA II hard drives use autospeed negotiation. This enables our SATA II drives to automatically detect the motherboard data transfer rate, making it backward compatible with SATA I data transfer rates. However, some older SATA I controllers are unable to support autospeed negotiation and cannot recognize the drive. This “drive not detected” condition occurs when a chipset is incapable of correctly negotiating the data transfer speed with a SATA II hard drive."
my drive is a SATA ||| but I'm pretty sure it's the same problem. The site goes on to say a fix would be to "purchase and install a third party PCI or PCI-Express Second Generation Serial ATA controller card for your Serial ATA hard drive(s)."
My question(s) are.
1)Is the problem that I am trying to install a Sata ||| hard drive on a laptop with a controller that will only recognize SATA | hard drive?
2) Or is the problem that the hard drive is an Advanced Drive Formatted hard drive and I need to buy a hard drive with out that specification?
3) Or Should I buy a SATA controller card as WD suggests on their website and if so will this definitely allow my laptop's controller to recognize the new hard drive and proceed with the installation?
4)Or Should I just return the hard drive and buy a SATA | non Advanced Drive Format hard drive? (question 2 basically)
Thanks for your help!

Hi @jasmine00
Welcome to the HP Support Forums.
I certainly understand your issue with the drive upgrade. Unfortunately it is a bit of the nature of notebooks, the sacrifice of a large amount of upgradeability, in exchange for compactness and portability. Whenever a new technology comes out, older notebooks are never really going to be easy to upgrade, it at all. Normally the unit as a whole is tested with a set list of hardware, and only those items are supported.
That being said there is this document that could be helpful with your problem.
Preparing Advanced Format hard drives for Microsoft Windows installations on HP Business Notebook PC...
And for your reference:
HP Pavilion dv6000 Notebook PC Maintenance and Service Guide
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Format hard drive

i try to rpaid the hard drive but the repair tolls couldn't and ask for format the drive and install everything again.
i have lots of information in my outlook and hard. i have a back up on time machine.
if i formatthe hard drive do i need the cd for lion? which i don't have!
how about the software and information, how can i use the time machine , how can i bring everything back to the same which i have it now?
please help

Alex, before doing anything, read through the Pondini tip on TM, and follow thelink to his TM site so you understand how to use TM. You will need that to restore your material if you format the hard drive.
To service the hard drive, restart the computer holding the Command and R keys, that will startup on the Recovery partition for Lion and you can proceed from there. At that point it might be worth using the utilities, disk utility to first check the hard drive before doing a format...be sure that is what you really need to do. You may just need to reinstall Lion. But see what it says before taking the step of reformatting.

Cd/dvd drive not found, can I format hard drive with an external cd/dvd drive. If so how?

My cd/dvd drive quit working and is not found in device manager so I purchased an external cd/dvd rw. Now I am having other issues with installing software and windows updates so I would like to format hard drive. Can this be done with external cd drive, if so how do I boot from it? presario v6000 laptop windows vista 32bit os.

Restart the notebook >> start tapping F10 key >> go to configuration menu >> Boot Order >> select the Ext DVD drive as 1st boot device >> save and exit >> Insert the recovery disc >> restart the PC >> press any key when prompted >> follow the instructions..
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

How do you find the right replacement for a hard drive

i have a 2007 macbook and the hard drive just went out and i want to find a new one that would be combatible

For a new hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives&Order=PRICE
Or OWC for regular hard drives and SSDs http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here are instructions on replacing the hard drive in a MacBook with a removable battery. http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088
After you put in your new hard disk put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window.
Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it. You should see your hard drive in the left hand column along with your other drives. Click on the drive and select the Erase tab. Set the format value to Mac OS Extended (Journaled) and click the Erase button. After that has finished select the Partition tab. Type in a Name for your hard drive and select how many partitions you want from the Volume Scheme. The usual setting is one partition. Click on the Options button after you've selected a partition to make sure it's set for GUID. Then click the Apply button and after the Partitioning is done quit Disk Utility.
You can now follow the instructions on the install screen

Hard Drive and Desktop Icons Have Disappeared From Dessktop

I can locate all the files and access them via "search" and clicking on them, but can't see them on the desktop.
Problem started with difficulty using Spotlight, which eventually led to a freeze and when I restarted, the images were gone.
Have already tried: (1) Disk First Aid, which found a couple of minor problems, but was unable to complete the verification test,stating "underlying disk needs repair" and "1 HFS volume checked needs repair. . . (2) Trashing the Finder preference (which had no effect) . . . and (3) Restarting — both from the existing OS, as well as the Mac OS X Install CD. Tried several times with the latter (holding down the C key), but it did not override the damaged system.
Can't remember the last time I had to reinstall a system, bu it probably was at least 5 years Ago, if not longer, so am hoping to avoid that. Also have found a few directions online (and in an Apple document) that require rewriting a script, which scares me even more, since I've NEVER done that and am concerned about messing up my system even further.
Am hoping there's an easy fix that does not require taking the computer in for service.

Sorry. I am NOT using 10.2.
I am using 10.4.11!
Also working with the original set of disks that came with the computer.
The first time I tried to boot with the Software Install disk, I assumed it had not booted properly, because the entire desktop (such as it was . . . i.e., just a few assorted folders, apps down the side and icons for the install disk appeared with with it.)
The same thing happened when I held down the shift key while booting.
Both times when I tried to use Disk First Aid, a message stated that it was not compatible with the current OS.
And no, I did not think to see which OS was active either time. But I wouldn't be surprised to find 9.2 (Classic), . . . one of the operating systems identified on the disk) which was available as an option at that time, for users still using software that had not yet been updated by the manufacturers.
But even if I had thought of that, I probably also would have tried to avoid loading OS 10.0.4 if I didn't have to. (Why take an unnecessary step backward?)
Fast forward to today: My computer is still working. Miraculously, Spotlight has reappeared (on its own). I think I can access all or most of the files on my computer by using "search" . . . but the only ones currently on my desktop (and reappearing after a shutdown) are the few that op up at random, when Iaccidentally hit the "G" spot.
The icons for the hard drive and other peripherals still don't show up . . . which, in combiation with the missing file icons suggests to me that I still have a problem,which I would rather repair now, than wait for it to multiply or cause a major, irretrievable crash.

HP System Recovery DVD incorrectly formats hard drive (WIN Vista HP SP1 64-bit 510141-001)

HP Pavilion DV4-1225dx
Vista Home Premium 64-bit
AMD Turion x2
I had previously posted the issue as "HP System Recovery Fails on new HDD", however it appears that the reason it is failing is due to incorrect formatting of the hard drive:
Went to purchase the oem HDD @ Tiger Direct (Hitachi 0A56415 Travelstar 5K320 Mobile Hard Drive - 2.5", 5400 RPM, SATA 3G, 250GB, 8MB Cache) but found it was out of stock. I purchased the suggested replacement (WD Blue 320GB Mobile Hard Drive - Designed for everyday computing - 2.5", SATA 3Gb/s, 5400RPM, 8MB C...)
I have attemptted the System Recovery several times each failing with errors. But after each failure the HDD is found to be incorrectly formatted as documented in the following link:
System Recovery Fails on new HDD
hp G71-340US WIN 7 HP 64 Bit
hp pavilion dv4-1225dx VIsta HP 64 Bit
hp pavilion zd7000 WIN XP Pro
hp pavilion xv886 WIN Millennium / WIN XP Pro
hp deskjet 6980xi
hp pavilion xt236 / ze4200 WIN XP Media Edition

Slolearner,
After doing a little research, I believe your issue may be related to your new hard drive being an AF (Advanced Format) drive. Please see "WD Scorpio® Blue™ SATA/PATA Hard Drives", which indicates your WD3200BPVT may an AF drive.
Please see "Cannot Recover the PC after Replacing the Hard Drive with an AF Drive (Windows 7 and Vista)" for information on this subject. While this document isn't for your specific computer, it is generic enough that it applies to your situation. If you wish to use your HP Recovery Discs successfully, you may need to purchase a non-AF drive.
If your computer boots into Windows, please see "Identifying an Advanced Format Hard Drive" to download and run the HP Advanced Format Hard Drive Information tool.
If it is an AF drive, please see "Preparing Advanced Format Hard Drive for Windows" and "Improving the Performance of an Advanced Format Hard Drive" for more information on the subject and possible steps to be taken to resolve your issue.
Lastly, it may be necessary to follow Paul_Tikkanen's advice and install Windows Vista from a Microsoft Windows Vista installation disc as follows;
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
If you can still read the 25 character Microsoft Vista product key on the bottom of your PC, you can make your own plain Vista installation media and use that to at least get the OS on your PC.
Here is how to do that if you can read that key:
Please click on the link below, click on the Windows Reinstallation Guide [27-07-2013] pdf link on the upper left of the page and then read the instructions for doing this starting on page 302.
http://philipyip.wordpress.com/dell-community-forums/
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
You may also consider purchasing a copy of Windows 7 and installing that instead. Windows 7 SP1 has much better support for AF drives than the previous versions of Windows.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Drivers for format hard drive of desktop imedia A3523 made in year 2010

Similar Messages

Maybe you are looking for