Drivers for HP Officejet 150 (mobile) will not install

I've been attempting to install a HP officejet 150 on a Mac air laptop that is running windows 7 (64 bit). Every time I try to run the installation program for either the full software and driver set OR the basic drivers it tells me that the computer has neither USB drivers nor USB ports, so it cannot install. Obviously the computer has these things. This happens even if I am trying to set up a bluetooth connection through the software as well as the USB connection.
Also, when I try to go through the bluetooth menu to install the device without a driver, it finds the device but cannot find appropriate drivers.
Has anyone heard of a similar issue? This is a real problem for me as I purchased this machine specifically for use with this computer.
This question was solved.
View Solution.

Hi,
Try following these steps and let me know if that may help:
1 )From Windows 7, type %temp% into the search bar and open the litsted Temp folder.
2) Locate and open the HP installation folder, it will begin with the 7z characters (e.g. 7zs1234)
Note: if there are several folders locate the latest one.
3) From that folder fo open the Setup folder
4) Delete the usbready.exe file
5) Navigate back 1 level up to the 7z folder and launch the Setup.exe file to install the HP software.
Hope that may help,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Officejet 150 mobile scanner not recognized

Win 8.1 desktop connected by usb to officejet 150 mobile printer/scanner
Installed using latest driver install package from HP. Install completes with no errors. Printer works normally
HP scan fails. Gives error box saying scanner not recognized - attempted uninstall and reinstall
Used utility from HP to do complete removal did not fix. Ran HP diagnostic which says driver not recognizing scanner and to contact support.
Need help

Hi @lutzro
I understand you are having problems scanning despite the troubleshooting your best efforts. I'm sorry to hear that, but will certainly do all I can to help out
Although you have already uninstalled and reinstalled, I suggest trying a more comprehensive uninstall. Please complete the following steps and let me know the outcome;
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box, type %temp%
Delete all files and folders from the temp folder. Choose skip if any pop ups appear saying any of the files could not be deleted
Download the software and choose to save as, save to desktop > OJ150ML511_Full_14_en.exe
After the software downloads and extracts, open the temp folder again, use the instructions from step 1.
Look for, and open the folder starting with 7z (Example: 7zS2356)
Open folder Util
Open folder CCC
If you have an HP computer run the L3uninstall.exe. If you have anon-HP computer run the L4uninstall.exe
When the uninstall has completed restart the computer
Follow these steps to reset the registry settings and options for Windows Installer.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /unregister, and then click OK.
Hold down the Windows Logo key on the keyboard and the 'R' to open the run box
In the Open box, type msiexec /regserver, and then click OK
*Note: there is a space between the c and the /
If you have any difficulty with this step, please use this link to perform it another way. Restarting Windows Installer
Run Disk cleanup from Accessories\ System Tool < How to Delete files using Disk Cleanup
Download and install the latest version of Adobe flash player http://www.adobe.com/support/flashplayer/downloads.html
Restart the computer
Hold down the Windows Logo key () on the keyboard and the 'R' to open the run box
Download and run the HP Printer Install Wizard for Windows
Type services.msc and press Enter
Locate Print Spooler and double click on it to open the Spooler properites
Make sure startup type is set to Automatic, if it is not please click on the drop down and choose Automatic
Under Service status, please Stop the server, and then wait a moment and click Start
Deleting the printer from Printer Server Properties
1. Open the ‘Devices and Printers’ folder
2. Choose ‘Print server properties’.
Win XP – With no printer selected, click ‘File’ then ‘Server Properties’.
Windows Vista – With no printer selected, press ‘Alt’ then click ‘File’ then ‘Server Properties’.
Windows 7/8 and 8.1 – Select any printer in the ‘Devices and Printers’ folder and click ‘Print Server properties’ above.
3. Click on the ‘Drivers’ tab at the top of ‘Print server properties’ window
4. Choose the printer you want to uninstall and click ‘Remove’
5. Choose 'Remove driver only'
6. The next screen will give a warning, letting you know that deleting the driver package will remove it from the system. Click ‘Yes’ to say that you are sure you want to do this.
Download and run the HP Printer Install Wizard for Windows
The HP Printer Install Wizard for Window was created to help Windows 7, Windows 8, and Windows 8.1 users download and install the latest and most appropriate HP software solution for their HP Printer.
Keep me posted, I look forward to hearing from you.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Im trying to install new drivers for my printer and it will not accept my password

Im trying to install new drivers for my printer and it will not accept my password

Hey fyermanbob,
Thanks for using Apple Support Communities.
OS X Mavericks: If your administrator password was not accepted
http://support.apple.com/kb/PH14014
Have a nice day,
Mario

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7

MultiMedia Center for Think Offerings for Windows XP and 2000 -- will not install on Windows 7 in compatibility mode or any other way. I receive error " can not open \device\memory" and then " This program can not run on his hardware.
Thinkcenter E series 8291-ETU --- upgraded from XP to Windows 7 yesterday.
Any ideas on how to get this product installed in Windows 7 ?

I recently did a clean install of Win7 Ult on my X61 7676A24, and this is the only Lenovo software that I could not find a Win 7 solution for. However,
1. I was able to load WinDVD8 upgrade (from Lenovo's Win7 information page) after first loading the WinDVD5 version that was the last good release for Vista.
2. The Multimedia Center for Think Offerings is basically Roxio's suite for writing cd/dvd's, drag to disc and so on.
Since I could not load this anyway, I was forced to try out Win7's inbuilt cd/dvd writing - it works perfectly well. Even better, Win7 natively supports an excellent ISO burning tool. So, I think if you explore these inbuilt tools, you can probably live without the Mul Cent for Think Off.
TP600E > T41 > X61 > X201T > X220 i7 IPS 8GB 160GB SSD

Why do i get an unknown publisher for 10.5 download? will not install on XP

why do i get an unknown publisher for 10.5 download? will not install on XP

Hi
Are you using a wireless router to connect to the internet? if so disconnect the wireless router and connect through LAN. Ensure you disconnect all your wirless devices including a wirless dongle if you are using one. Once connected through LAN download again. This worked for me today.

The latest update for iCloud has downloaded, but, will not install, I have tried manually as suggested.

The latest update for iCloud has downloaded, but, will not install, even when tried manually. The QuickTime update which was on the same page was ok though!

I have the same problem....I hope they get arouind to fixing this issue?????????????????

HP OFFICEJET PRO 8500 - Will not install on wintows 8.1- says SYSTEM CANNOT FIND SPECIFIC FILE

My HP Officejet 8500 will not install on windows 8.1. The error message says:
The system will not find the specific file

Hi,
Follow the steps below and check if that resolve the issue:
1. Open Mcafee software, from the Virus and Spyware Protection section click on Schedule and run scans. Click on Real time scanning and then on Turn Off. select till I restart the PC and confirm by clicking the Turn Off button.
Now try reinstalling the HP Software and check if the error no longer appear..
If the issue persists continue follwoing the next steps below:
2. Open the run dialog by clicking both the Windows key and the R key on your keyboard. Type %windir% and click on OK.
3. Type hpoins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpoins1.old)
4. Type hpwins*.dat into the top search bar, if there are any results rename the extention into old instead of dat. (e.g. hpwins1.old)
5. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /UNREGISTER into the Run dialog and click on OK.
6. Launch the Run dialog by clicking both the Windows key and the R key on your keyboard. Type MSIEXEC /REGSERVER into the Run dialog and click on OK.
7. Run the installation file and check for any difference.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp officejet 6100 eprinter will not install on windows 7 64bit

I've tried everything. Cannot install software for brand new hp officejet 6100 eprinter. No using disc, not wireless, not usb, not downloading software not troubleshooting in windows nothing what so ever. It's been weeks and weeks, just can not use this printer in anyway on HP Pavilion dv7-3060us Entertainment Notebook PC
Serial Number: [edited by Moderator]
Product Number: VM237UA
Can't attach screen print of error messages here.
install does not finish: A fatal error occurred preventing product use. Click "Cancel" to cancel install.
MSIExec command: /i "C:"\HP_ePrint\Setup\Core\SIPM_64\HpTcpMon65.msi"/qn REBOOT=ReallySuppress
Path: <empty>
Return code: 1603
Troubleshooting HP printer software installation
We are sorry that our printer software encountered an error while installing.
Your printer software did not install successfully. You may have seen an error similar to one of the following:
"Device setup failed to complete"
"Unknown device"
A red X displays after connecting the USB cable
On the following screens, you will find troubleshooting solutions that our support agents have found to be the most helpful to resolve install errors. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved. Also, this troubleshooter includes buttons to make certain steps easier. If a button doesn't work or you would like to do the steps yourself, you can view the manual steps by expanding the hidden text below any button.
To begin troubleshooting, click Begin USB Troubleshooting, below.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software
This solution consists of multiple steps. Make sure you complete each step before continuing to the next one.
Uninstall the HP software
Even if the HP software installation failed, some components might have partially installed on your computer. Follow these steps to remove them.
Disconnect the USB cable from both your printer and computer (if it is currently connected).
Click here to open the list of currently installed programs.
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type control panel in the Search (Windows 8.1) or Search Apps (Windows 8) box.
Click or tap the Control Panel icon.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click the Windows icon, and then click Control Panel.
The Control Panel window opens.
Under Programs, click Uninstall a program.
On the taskbar, click Start, and then click Control Panel.
The Control Panel window opens.
Double-click Add or Remove Programs.
In the list of installed programs, click your HP printer name, and then click UninstallChange/Remove.
Follow the onscreen instructions to complete the software removal.
Caution
If the uninstaller asks you to remove shared files, click No. Other programs that use these files might not work if you delete the files.
You may be prompted to restart your computer.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Run the Microsoft Fix it troubleshooter to reset the registry entries
Sometimes the uninstall does not completely remove the software. Microsoft provides an automated fix for this problem on their web site. Follow these instructions.
Click here to open the Microsoft support solution:
If you like, review the information on the Microsoft web page.
We recommend that you click Run now in the Microsoft Fix it section to fix the problem.
Follow the onscreen instructions in the Microsoft wizard:
On the Are you having a problem installing or uninstalling a program? screen, click Uninstalling.
On the Select the program you want to uninstall screen, scroll through the list of programs and choose the entry for your HP printer series, and then click Next.
When the Microsoft wizard completes, you will be prompted to restart your computer. Click Yes to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Disable startup services
Windows allows many programs and processes to run immediately upon startup. These programs may be preventing you from installing the HP software. These directions explain how to disable these programs and processes temporarily so that you can install the printer software.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
Check to see if Normal Startup or Selective Startup is currently selected. If Normal Startup is selected, follow the indicated steps, below. If Selective Startup is selected, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To disable a Normal Startup
To disable a Selective Startup
Select Selective Startup, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Click Disable All.
Click the Startup tab, click Open Task Manager, and make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click the General tab, and then clear the Load Startup Items check box.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
Make a list of the items that are selected.
You will need this list to reset your computer startup items later.
Click Disable All.
Click Apply, and then click OKClose.
A new window displays. Click Restart to continue.
Note
After the restart, this troubleshooter will open and return to this page automatically.
Upon restarting your computer, the System Configuration Utility window may display. If it does, select the Don't show this message... check box, and then click OK.
Click Next Step below to continue with the next step in the solution.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Reinstall the HP software
Now that your system is updated, try installing the HP software again.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Printer Install Wizard download page.
Follow the directions to download and run the HP Printer Install Wizard.
Follow the onscreen instructions to download the printer software for your version of Windows.
The HP Printer Install Wizard downloads and starts the software installation.
Note
A full Windows 8 or Windows 8.1 printer software install may not be available for all products. Click here to find out if a Windows 8 or Windows 8.1 download is available for your printer.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following USB tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Turn your printer on.
If you are using a USB connection, disconnect the USB cable from both your printer and computer (if it is currently connected).
Reinstall the software using the CD that came with the printer, or download and install the latest version of the software for your printer from the HP web site (recommended):
Click here to go to the HP Support & Drivers web page.
Select the option to download drivers and software, and then type the name of your printer in the search box.
For example, type HP Photosmart B211.
Follow the prompts and make selections to display the software and drivers for your printer.
When prompted, select the appropriate version of Windows, to view the driver download and CD ordering options.
Tip
If you're not sure whether your operating system is 32-bit or 64-bit, click the Is the Windows version on my computer 32-bit or 64-bit? link on the page for help.
If given a choice, select the full feature software and drivers link.
This option may appear in an area labeled Drivers.
When prompted, click Save, and download the software to your desktop or a folder where you can easily find it.
Start the HP software installation by running the install program that you downloaded.
Follow the onscreen instructions, making sure to proceed all the way through the installation without canceling or exiting any screen.
Note
Some printer models require a USB connection during the install. If you are prompted by the software, connect the USB cable. Do not connect the USB cable until you are prompted, or an install error may occur. Also, if your software is still not finding your printer over the USB connection, review the following tips.
+ USB tips
Ensure that your USB cable is no more than 5 meters (16.4 feet) in length. (For best results, use a cable that is less than 2 meters (6 feet) in length.)
Try connecting the USB cable to a different USB connector on the computer. (For example, if you plugged the cable into a front USB port, try plugging it into a port in the back.)
If the USB cable is connected to a USB hub or a docking station for a laptop, it could cause the installation to fail. Even if you believe that your USB hub works fine, try connecting the USB cable directly to the computer during the device installation (when prompted). You can always move it back to the USB hub later.
If you need to use a USB hub, use one that is externally powered instead of using a non-powered hub.
When the installation completes, try using your printer.
Whether or not you installed the software successfully, make sure you follow the instructions in the next step to enable your startup software, or your computer may not function in the way you expect. Click here or click Next Step below to continue.
Uninstall the HP software, run Microsoft Fix it, disable startup services, and reinstall the software Enable startup services
If you disabled startup services earlier, make sure you follow these steps to enable them again or your computer may not function in the way you expect.
Click here to open the System Configuration Utility dialog box. (It may take up to a minute for this to open.)
+ Button didn't work? Click here for instructions.
Point to or tap the upper-right corner of the screen to open the Charms bar, and then click or tap the Search icon.
Type msconfig in the Search Apps box.
Click or tap msconfig.
On the taskbar, click the Windows icon.
Type msconfig in the Search programs and files dialog box, and then press Enter.
On the taskbar, click the Windows icon, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
On the taskbar, click Start, and then click Run.
Type msconfig in the Run dialog box, and then click OK.
If you disabled a Normal Startup, follow the indicated steps, below. If you disabled a Selective Startup, follow those steps instead.
Note
Follow the appropriate instructions for your startup type. You only need to follow one set of instructions, not both.
To enable a Normal Startup
To enable a Selective Startup
Select Normal Startup.
Click the Startup tab, click Open Task Manager, and then selectenable every item from the list you made in a previous step.
Click the Services tab, and then select the Hide All Microsoft Services check box at the bottom of the screen.
On the Services tab, select every item from the list you made in step A.
Click Apply, and then click OKClose.
A new window displays, prompting you to restart.
Note
After the restart, this troubleshooter should open and return to this page automatically. If it does not open by itself, open it manually after the restart.
Try using your printer again.
If you successfully installed your HP printer, you're done! You can delete this troubleshooter if you'd like.
If the install was not yet successful, click here for further assistance.
Home Begin USB Troubleshooting>
Further Assistance Exit Start Over
Give us feedbackclose
Give us feedback
Select your answer, and then click the button that appears to send us your results.
Did this solution solve your problem?
Yes, it solved my problem No, it did not solve my problem I want to give HP more feedback. Take me to a short online survey to provide additional comments on how to improve this solution.
Exit without giving feedback
close
close
Confirm Exitclose
Exit Troubleshooter?
YesNo
For Further Assistanceclose
For Further Assistance
Visit HP Support Forums and connect with HP users to get insights, tips, and answers to questions about your product. Follow the link below to view the forums.*
Click here to go to the online HP Support Forums.
If you are still unable to install the HP software, please contact HP support.*
Click here to find HP contact information for your country/region.
* Support options and availability vary by product, country/region, and language.
OK

Hi @prdstudio3 ,
Thank you for visiting the HP Support Forums. The Serial Number needed to be removed from your Post. This is From our Rules of Participation:
Protect privacy - yours and others'. Don't share anything about yourself that you would not want to see on a road-side billboard. Don't post contact or other personal information-your own or anyone else's-or any content that you receive in one-to-one communications without the author's consent. For example, don’t post your computer’s serial # or contact information publicly, and do not allow someone you don’t know to remotely take control of your computer.
If you need people to contact you directly, either ask them to send you a private message or subscribe to the thread so you will be notified when there are replies. You may also click on your name anywhere in the forum and you will be taken to your profile page, where you can find a list of threads you have participated in.
Sharing personal email addresses, telephone numbers, and last names is not allowed for your safety. If you have any questions feel free to send me a private message in reply.
Thank you
George
I work for HP

Device driver for IPOD NANO...will not install from installation CD

During first installation of software, program asked to connect the ipod to the pc for possible formatting. PC did not find the hardware drivers on the installation disk, will not reconize the new hardware!!!! Did install itunes and ipod updater fine. I already uninstalled and reinstalled and the same thing happened. Please help I have two brand new nano's that I would like to be able to use.
Thanks Jen
dell deminsion 2350 Windows XP

Hi jngs & amyjo - have u sorted problem? I'm having exactly the same problem with my nano.During first installation of software, would not recognise new hardware when connecting ipod to the pc for formatting. I've uninstalled and reinstalled using both CD that come with nano and also latest software update available on itunes...but still will not recognise hardware when nano connected to pc. Have tried with several 2.0 ports - these r all ok cause i've connected other devices to them and they work fine. I've tried connecting nano to a friend's pc - he all ready uses a ipod (not nano) - same problem "does not recognise new hardware". The usb lead is fine as the nano charges when connected to port. Am planning to take nano back to Apple store in Blue Water (outside London) nxt wk. Why is it that things don't work even when you follow instructions to the letter!!!

HP Officejet Pro 8630 will not install In Windows 8.1

Error 5: Failed to add port monitor HP Discovery Port
Monitor (HP Officejet Pro 8630)
When I try and install the printer the software hangs up after the first page with this error message and it will NOT go any further.
On my Windows 7 Laptop it went right on without any problems.
I'm about ready to take this one back to the store and DEMAND my money back.

Hello there @FIRSTLIONHEART ,
After doing some research for you, I have found another community member with the same issue who's issue was resolved within this thread.
Please click this link to see their solution and try the steps:
error 193: failed to add monitor HP Discovery Port Monitor (HP Office jet Pro 8600).
If this does not resolve the issue for you, please let me know the results!
Good luck
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Download drivers for another pc, but firefox will only install them

I am trying to download drivers for a new (used) pc I obtained. When I try to download the proper driver, The only option available to me is to install. There is no question of do I want to save, only to install. Is there a setting to overcome this?

Hi bussoboy,
Adding to sarbin's instructions, you should probably run the Windows 7 Upgrade Advisor from MS . That will show you what is compatible and what is not.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Downloading Adobe Reader for OS 10.4.11 will not install

In the options to selecting OS version I selected OS10.4.11-10.5, but when I try to launch the installer, I receive a message that OS 10.5 is required. I tried an earlier version download option and I receive the same message...Any thoughts (other than 10.5) I can look at? My computer OS is up to date according to Apple - I use a Powerbook G4
Thank you,

Let me know your OS. Reader X does not work on OS 10.4.11 even if it is Intel Processor.
Requirements for Reader X are:
1) OS 10.5.x or OS 10.6.x (Will not work on OS 10.4 series)
2) Intel Processors (will not work on powerPC based architecture)
Does your system qualify these two requirements? If not I suggest you download Reader 9.4.1 to work with pdf files.
Thanks,
Karan

Printer officejet pro 8600 will not install

I have done everything but start drinking and that might be next!!! I cannot get this printer to work. Every since I download McAfee (which I uninstalled it) it will not work correctly. Now I got this pop up.
This file does not have a program associated with it for performing this action. Please installl a program; if one already installed create association in the default program controls.
How do you do that? And yes I have installed the software a million times.

Hello @glendaguichard ,
Welcome to the HP forums.
I understand you are getting an error message, despite a million software installs.
I would like to help you.
3/4 oz Malibu® coconut rum
3/4 oz white creme de cacao
1/4 oz Frangelico® hazelnut liqueur
1 splash half-and-half
Combine ingredients in a mixing glass. Shake and strain over ice in an old-fashioned glass.
Sorry.
On a more serious note, What is the operating system of the computer?
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Software update in mountain lion offers updates for iPhoto and iMovie that will not install

Updated my iMac 2011 to Mountain Lion. Software Update now operates through the App Store. Third Party apps are OK but Apple's native Mac apps eg iPhoto, iMovie offer updates for installation that do not install.
Get this error eg for iMovie but similar for iPhoto and maybe others:
"We could not complete your update. iMovie is already installed on this computer. Choose Software Update from the Apple menu to check for available updates."
If you do as suggested, it reloads App Store software update and goes round again...
If I go to "Check for updates" in the iMovie menu it tells me it's the current version.
"This version of iMovie (9.0.8) is the current version."
The badge showing the count of apps requrining an update is also wrong.

Hi, just wondering, were any of Apple's Apps moved from there default location?

Extension for Motif Flash Ad Kit will not install

I followed the directions given on this page:
http://www.adobe.com/devnet/rich_media_ads/articles/flash_ad_kit03.html
I downloaded the extension from Doubleclick. I installed the
extension successfully. The templates are not available in the
Flash UI. What did I do wrong? See this screenshot -
http://plutonomy.org/no_motif_install.jpg
- It shows the Flash UI, my Configuration folder with the Motif
components installed, the Extension Manager with Flash Ad Kit
installed. But no way to use the templates... Very confused.

I'd like to add that there are several errors with this
Double-click extension. It would not install on a Windows XP
machine with CS3, stating "This extension requires Macromedia Flash
MX or greater. Quitting." Oh, CS3 isn't greater??
Also, I found the Window > Other Panels on my Mac version
(where the extension did install but doesn't show up on the welcome
screen) and when I try to open the Motif Panel, I get several
Javascript errors and the panel opens up with blank content.
I will be sending a note to the author of the tutorial. Users
trying to develop Flash ads with the Flash Ad Kit be warned - it
doesn't work!!

Drivers for HP Officejet 150 (mobile) will not install

Similar Messages

Maybe you are looking for