Drivers for input devices, xorg.conf

Hi!
I have a laptop with keyboard + touchpad of course and external usb logitech mouse. I would like you to advise me about drivers for these devices. For logitech mouse it's rather obvious. I need to use evdev, to use all buttons. But is there any sense to use evdev with touchpad (Elantech) or keyboard? Should I use standard kbd driver for keyboard and mouse for touchpad? Do you have any other suggestions?
(BTW. I am encountering some problem with mouse and touchpad configured as evdev. When logging out of gnome, X server gets a segfault (Fatal Error, Caught signal 11).

I think that card is an agp card (i have one matrox g100 here agp1x, powerful stuff 8mb xD).
There's an option called Agp aperture size in your bios... since you almost dont have any video ram memory avaiable, increase that value to at least 128mb and you should be able to do something with that... (you need to have at least 128mb of ram).
8mb isn't enough to have high resolutions with 24bit depth. just do "(resolution x bit depth) / (100000 * 8)" -> that will give you in MBytes the amount of vram that you need. For example, 1280x1024 @ 24bits needs 4mb. *i cant confirm if what i said is correct, but im almost sure that this is the math that you have to do*

Similar Messages

Officejet Pro 8600 Premium error message The drivers for this device are not installed. Code 28

Printer : Officejet Pro 8600 Premium. model CN577A
OS : Microsoft Windows 7 Home
Basic 64
How is your product connected to your PC? : Network
Problem description : In Device Manager I've got an error message with the
Officejet pro 8600 icon - "The drivers for this device are not installed.
(Code 28)
There is no driver selected for the device information set or element." I
have uninstalled and re-installed the driver to no effect. The printer
appears to be functioning properly.
This question was solved.
View Solution.

Hello,
Yes, i too would suggest a clean re-installation of the software.
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Qosmio G10-133 Drivers for Other Devices

Hi peeps.
Yes I know this is an old laptop. I recently had to re-install the software due to hard drive failure. I always have problems. Toshiba installed a new motherboard years ago with the upgraded video chipset Nvidia Geforce Go 6600. Since then I have always had problems reinstalling using original disks. I have never been able to reinstall the Qosmio Player and always end up with the laptop rebooting after software was installed and going to blue screen of death. I have now given up with the qosmio player and the install disks (Windows MCE) and just install Windows XP. However here is the problem:
Under Device Manager I get a couple of errors:
Other Devices states MULTIMEDIA VIDEO CONTROLLER as not working.........what an earth is this and where do I find the driver?
UNKNOWN DEVICE as not working.................................what on earth can this be and what drivers?

Hi again,
I went and did what you suggested, but it can't find a vendor and the 2nd item is unknown. The "System" showed the following:
System Information report written at: 02/13/11 09:19:59
System Name: QOSMIO
[Problem Devices]
Device PNP Device ID Error Code
Multimedia Video Controller PCI\VEN_4444&DEV_0016&SUBSYS_00011179&REV_01\4&AD1 B67F&0&48F0 The drivers for this device are not installed.
Not Available ACPI\TOS6205\2&DABA3FF&0 The drivers for this device are not installed.
I couldn't find vendor 4444. I assume that the problem is that my motherboard is different to the one my disks are for. To get the graphics card to work I had to download the drivers for the g20 model not the g10. (I assume that this is due the original being an nvidia 5900 and this board has nvidia 6200.

Where can I find drivers for dvd device?

Hi guys,
Hi want to install Windows 7 but when I am running setup windows asks for drivers for dvd device.
Where can I find these drivers or how can I install windows 7?
I know hp does not support serie tx1000 in windows 7 but I have seen people who installed that OS.
any help will be usefull
thanks!

I just got off the phone with a new case manager named Jamie 1-877-917-4380 ext 93 regarding new case number 7501359724, and of course just what I expected he would say, HP has no known issue with the tx series and no issue with the Nvidia 6150 chip. He said that its just a coincidence that 1000's and 1000's of owners have experienced overheating motherboards. That despite the same symptoms of other hp laptops and their recall proceding a huge lawsuit with Nvidia admitting they had sold hp defective chips, the tx/ 6150 nvidia was not one of the defective chips. After reading the lawsuit details I found that Nvidia never released a list of the exact defective chips just that there were some, and then settled with hp. Hp for some reason or another made a list of the so called defective ones and left many of the additional defective ones including the tx series/ Nvidia 6 series chips off the list. Maybe there are not as many of us that own it, so as a business move they felt they could get away with this, or maybe because the failure typically hits a month or two after warranty expires. I even looked up the chip by itself and found that the same Nvidia 6150 chip was used in certain Dell notebooks and had an issued recall relating to its defect. Yet Jamie from Hp clearly stated that there is no known defect and that I would need to pay 400.00 USD and get the mother board replaced. I told him that I wasn't going to do that, why would I spend 400 dollars to have a new defective mother board intsalled to fail again. He assured me that it wouldn't be an issue because the new mother boards have a different set of chips due to the issue with the old chip. What is that about? Does he think I am stupid, they say there is no defect in that chip, so they wont take responsability but they admit there is an issue with the chip, what is the difference? They change the word defect with issue and that excuses them from any liability in providing a product capable of delivering expectations and quality of its class. I personally wont settle for this. I wont settle for less than a refund or a new equall value notebook free from defect with an extended warranty. To all of you others with this model of notebook i suggest you do the same, don't give up on your right to defend your hard earned money. Look up Nvidia 6 series chips and you will find many companies that have disclosed its defect and taken responsability to their product owners. Hp needs to do the same. Shame on HP I had to edit this because they keep deleting my posts to cover up there secret, you can try and follow the trouble shooting tips, but it wont work, the graphics card has burned up and is killing your mother board. A company invested a lot of money only to realize they can either lose a lot more money or they can brush it under the rug at the expense of their customers, and so they try to sustain profitability, by hiding the truth. I suggest you buy a msi netbook, it has no frills but I promiss it will last, msi knows how to make a strong motherboard and stand by their products, no use in buying a fancy computer when it will only tease you with 13mons of life. I am sorry that myself and all of you put your hard money and trust into a product that was probably knowingly doomed before it was even sold to us. Just remember that in this economy even a large company that you think you can trust can't be trusted, MONEY trumps the consumer!!

Drivers for VME devices and VME-MXI-2

I would need some drivers for the following devices to run in LabVieW:
VME-MXI-2
CAEN V513 16 CH PROGRAMABLE I/0 REGISTER
CAEN V260N 16 CH NIM SCALER
Many thanks for any help!

Is this still an issue? Did you submit a request on the National Instruments Device Network? If not, I'll post the link to the page below:
Instrument Driver Request

Drivers for Analog Devices RTI-815

Hi,
Does anyone know where I can find Labview drivers for an Analog
Devices RTI-815 card, if they exist?
The card came out of a Haake Rheocord System 90. The old
controller for it is a 286; we'd like to replace it with a newer computer
and software written in Labview. Thanks for your help.
-Nathan

Hi, thanks for the responses. I did a search on the 815 and 802, but I must admit, I neglected to search the forums for the AC28. All 3 cards are still available (although AD has discontinued their cards UEI manufactures replacement units) The company I work for has these cards in several test rigs, and I'm looking at options of modernising the PC & control software without incurring the cost of a complete control system retrofit (the current control software is DOS based). In view of performance & accuracy it probably makes sense to upgrade the cards and signal conditioning, but In the short term that would be a difficult proposition.
We also have other test machines which use labview, AD 5B signal conditioning, and Siemens profi connected I/O. Ideally if we were to look at a complete retro I would be keen to commonise as much equipment as possible. However, while the current hardware remains available, and performs adequately It will be quite difficult to justify.
SSK: Also, I would be interested in the code that was you utilised, if you could dig it up that would be a great starting point.
Mark: Thanks also for your post. I'll look into the driver kit, and most likely ask NI if they would consider writing some drivers at some stage.
Some links:
AC28:       http://www.opto22.com/site/pr_details.aspx?item=AC28&qs=100110021006,,,0,6
RTI-815:   http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815-32/
                 http://www.ueidaq.com/products/pci-data-acquisition/uei-800/uei-815/
RTI-802: http://www.ueidaq.com/products/pci-data-acquisition/uei-isa-ao/uei-802-8/

X240 Drivers for Unkown Device: USB\VID_138A&pid_0017

Hello,
I am trying to install all the drivers for a Lenovo x240 running Windows 7 64 bits.
I can't find the one for the unknown device (see attached screenshot):
As you can see the ID for the driver is USB\VID_138A&PID_0017
(I have unsuccessfully tried to install most of the drivers from the Lenovo Drivers site)
I would be really gratefull if you have found this issue and share the solution.
Regards.
Thanks

Hello and welcome
A little searching turns up some threads here on the forums that say it's the fingerprint reader.
Have you tried this? http://support.lenovo.com/us/en/products/laptops-and-netbooks/thinkpad-x-series-laptops/thinkpad-x24...
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Still looking for drivers for this device

Hi guys, I'm having some issues finding the device at hand:
ACPI\VEN_SMB&DEV_0001
I've got a Pavilion 17f100 nm, croatian market.
Also, i've noticed I have some dificulties when trying to connect via wireless or issues with my ping being tooooo high when playing online, may be because of the internet connection but I'm not so sure.
Thanks in advance, help always appreciated

Hi:
Download, unzip and manually install the driver I attached under Attachments below.
Go to the device manager and click on the device needing drivers. Click on the driver tab. Click on Update Driver.
Select the Browse my computer for driver software option and browse to the driver folder that you unzipped.
Make sure the Include Subfolders box is checked and the driver should install. Then reboot.
Attachments:
AMD VEN_ASD&DEV_0001.zip ‏62 KB

WIndows 8.1 Drivers for Unknown devices - Brazilian Portuguese Version

Hello,
I bought my Envy T100 in USA but I have installed Brazilian Portugues version on it.
So, there are some missing drivers on it...
I've installed all drivers from HP center, and even then there are missing drivers from HP.
So, my quesiton is how can I install them all?
Here are they:
1 - PCI\VEN_8086&DEV_8C3A&SUBSYS_1967103C&REV_04
PCI\VEN_8086&DEV_8C3A&SUBSYS_1967103C
PCI\VEN_8086&DEV_8C3A&CC_078000
PCI\VEN_8086&DEV_8C3A&CC_0780
2 - ACPI\VEN_HPQ&DEV_6007
ACPI\HPQ6007
*HPQ6007
3 - ACPI\VEN_INT&DEV_33A0
ACPI\INT33A0
*INT33A0
My HDMI just won't work as it should, I mean, the sound doesn't go thru the cable...
Anyone could help?
thanks and awaiting...
This question was solved.
View Solution.

Hi:
You need these drivers...in the order you posted the devices...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-123966-1&cc=us&dlc=en&lc=en...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131788-1&cc=us&dlc=en&lc=en...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128857-1&cc=us&dlc=en&lc=en...
Did you install the Intel HD graphics driver? You need to install that in order for the HDMI to work.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...

Missing drivers for unknown device

Hi all, I installed Windows 8.1 on a HP Pavilion Notebook - 15-p101 and managed to fix all missing drivers but this one.
Device unknown
Location: on PCI Bus
ACPI\HPQ6007\3&11583659&0
Any help would be greatly appeciated. Thank you.
This question was solved.
View Solution.

Hi:
You need this driver...
HP 3D DriveGuard Software
File name: sp67280.exe

T61 cannot install device drivers for any device plugged in, no permissions

Hello to All,
1. Vista is unable install a simple device driver. There must be some trick to fix this.
2. I've changed the one user from Administrator to single user. I can not open a file which requires Admin password. It says "type in password" and doesn't change with no place to type in the password.
Typeing => start 'control Userpassword2' ; I get the same message.
The one user is a member of Administrators and has all rights. Yet has no actual rights, and UAC cannot be turned off.
Please any help is appreciated.
Blessings,
Chetanji

hi dunchilla,
Could you please try this once?
1. Uninstall Ovi Suite, PC Connectivity solution and Nokia Connectivity cable drivers from Add/remove program if anything is there.
2. Delete the files from here If anything is there
C:\Documents and Settings\User\Application Data\Nokia\Ovi Suite
C:\Documents and Settings\user\Local Settings\Application Data\Nokia
C:\Documents and Settings\All Users\Application Data\OviInstallerCache
3. Please search and download MSI clean up utility from microsoft website
Once installed please select the programs related to Nokia and click remove.
Restart Computer.
Then download from microsoft website and install Windows Installer, so that the installer is upto date.
4. Restart the PC
5. Download and Install latest OviSuite http://europe.nokia.com/support/download-software/nokia-ovi-suite
6. Connect the device and select pcsuite mode
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

I need drivers for PCI device and SM Bus controller

I have a Hp 2000-2d19wm and I downgraded from win8 to win7. Now I'm trying to install the drivers and I can't find them on the HP website. Please help me.
This question was solved.
View Solution.

Hi:
You need this driver for the smbus controller...
http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=cp_118001_1
You need this driver for the PCI Dev:
Realtek Card Reader Driver
File name: sp64801.exe

Windows 7 x64 only installs the drivers for USB devices that are plugged in upon system startup

Hi all,
I have a most unusual problem. On my personal desktop, I can only use USB devices that are plugged in upon system startup. If I unplug a USB device and then plug it in again, the driver will not install correctly. I cannot force the device to start and I
can't pick a driver manually. All I get is this. If I plug in a USB device and then reboot, the driver gets installed correctly and I can use it until I unplug it again. I'm pretty sure it's a Windows issue
but I can list the hardware I have if it is needed.
I have tried:
Running an SFC /SCANNOW as administrator
Uninstalling all USB controllers via device manager and letting them reinstall
Neither worked to resolve the issue. If this was a client's computer I would probably just reinstall Windows but because this is my main work PC it'd be a huge hassle to do it, so I'd really appreciate any other ideas anyone has. If I have to reinstall I
will. Thanks!

Hi,
Since the issue just happened for 4 monthes, I consider that some changes or updates may cause the issue.
Please also try to restore the system back to the point before this issue.
You can also try these steps:
1.Power down your laptop or desktop
2.Physically unplug the computer. If it’s a laptop, remove the battery too.
3.Leave it disconnected for three minutes
4.Replug the desktop or reinsert the battery
5.Power on the system
For the reasons, you can refer to this article:
How to fix “USB device not recognized”
http://www.fixedbyvonnie.com/2013/10/how-to-fix-usb-device-not-recognized/#.UvtCLf7xvwo
Kate Li
TechNet Community Support

The drivers for this device are not installed. (code 28)

I'm running Windows 7 64-bit and my 3210xi All-in-One is working perfectly but is reporting errors in Device Manager. I've done the obvious things -- I've downloaded the latest software from hp.com (the filename is AIO_CDB_Net_Full_Win_WW_130_141.exe) and tried to get windows to find a driver but can't seem to get rid of the message. There's also nothing useful that I found in the MS KB. Anyone have any suggestions please? Thanks!

Hi,
Click Start > All Programs > Accessories > Run. the Run dialog appears,
Type %temp%, then click OK.
locate and enter into the HP Installation temporary folder, start with the 7Z characters.
If you can see several folders starting with 7Z, locate the latest one.
Click the Address bar area, then the full address path will appear,
Copy the full path location by clicking CTRL + P while the path is selected.
Enter the Device Manager.
Right click the printer name with the error mark, then click Update Driver.
Select the second option to manually locate the driver.
Paste the temporary folder path and click Next (Keep Include Sub Fulders marked), the driver should be updated.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Is it possible (and as easy as for GPIB) to develop labview drivers for USB devices?

I dont want to use GPIB at all, just USB.
Thank you in advance.

The best way to call your USB device would be through your USB driver. The third party device vendor should provide a driver (dll) that can be called from LabVIEW using Call Library Node.
Chris D
Applications Engineer
National Instruments

Drivers for input devices, xorg.conf

Similar Messages

Maybe you are looking for