Drivers for Live! Cam Video IM Pro?

Where can I find drivers for the Live! Cam Video IM Pro? It's not listed in the driver dropdown at http://us.creative.com/support/downloads/...

Check again, the driver is available now ..... uploaded on 8 Jan 07.

Similar Messages

Live CAM Video IM Pro - Blue Screen (KS.SYS)

Just purchased Live CAM Video IM Pro first creative product.
My System: WinXP SP2, GB, Over 8 GB system space free.
Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
Result: The cam is useless.
Any help is greatly appreciated.

no one can help me? plz thx

32 bit live cam video im pro vista dri

I just purchased a li've cam video im pro and downloaded the vista 32 bit driver. I ran the setup and the files appear to be in the correct directory, but the "driver set-up" progress window stalls at 90%. I thought the installation might need the camera, so I plugged it in, but alas, to no avail. I've tried to install the camera 4 different times, but each time it goes all the way through the process and then freezes at 90%. I've doubled checked and I'm running a new install of Vista 32 bit on a ?new gateway computer. Anybody got any ideas?Pete

no one can help me? plz thx

Unable to get Live Cam Video IM pro to work with MS Messenger

I have installed Live Cam IM Pro and all software from CD, plus updates. It works if I try Cam Manager ... I see myself in preview window.Looking in Start - settings - control panel - scanners & camera there is only one entry, the Live Cam pro. I cannot get it to work with Windows Live Messenger .... if I initiate a video call, it rings but when far end answers ... I get video window with ... video loading message, but it fails and I just get a standard XP icon. If I go to Messenger .. tools ..audio & video the camera sparks into life and again I see myself in preview.But when I go to tools .. webcam settings I see the error message :Cannot change camera settings because your camera is not plugged in or you are using it in a video conversation or with another programIt is obviously plugged in, and there are no other programmes running. I have tried deinstall & reinstall ... no difference. I have removed CD extras .. so now just have Cam Manager & Video driver ... but still no joy.Anybody know how to fix this ?
Message Edited by Catherina-CL on 02-12-2007 08:39 AM

Bump, fixed the post.
Cat

Live Cam Video IM Pro - Photo Capture Fails

I can record video just fine w/the cam center software, but if I attempt to do a Photo Capture, get an error, "Cannot save photo..."? What's up w/that?

Hi again, Ok I don't know what operating system that your using but I use vista home. I have sorted out the problem and heres how
1 Uninstalled the software completly.
2 Restart the pc.
3 Reinstalled the software without the drivers.
4 Pulled off vista drivers from creative list of update drivers.
5 Restarted pc.
6 Plugged in web cam and windows installed new driver.
7 Openned up cam manager and hey presto it works.
It took alot of messing around as I am a new user to vista after upgrading from xp, I hope this helps you to sort out your problem good luck

Creative Live Cam Video IM Pro & Kubuntu

Are there linux drivers available for this web cam? Sure would be nice to be able to use it on something other than Windoze. Or am I just SOL? Thanks,
Scott

I am having the same problems. Were you able to find a resolution? Please email be at [email protected] thanks, Bruce

LIVE CAM VIDEO IM pro

mysystem : pent IV , 2400 mhz ,52 MB ram -- usb2 - ADSL internet !!my question : i chat with skype and the " old " creative ( 460x260 ) minimum the last year -- WITHOUT ONE PROBLEM ---- YESTERDAY i take the NEW ONE from the shop and install ( 800x600 ) and the result :MAXIMAL 5-0 minutes ists work SUPER and than the pic was frozen ? could u give me a TIP for solution ? ( skype last version BETA 3.0.0.06 )thanks and regards from vienna gerhard

Tobiasze,
Here's the link to the quick start guide.
This web camera does not have a built-in mic, you will need an external microphone. Chat software are easily available on their respecti've websites, all you need to do is just google search for it.

Live cam video im pro email servers trouble

when i go to email a photo or video it only allowes me to go to outlook express and doesn't let me have the opion to use my yahoo email or even copy into a yahoo email can someone please help
Message Edited by tlranger12 on 02-20-2009 02:03 PM
Message Edited by tlranger12 on 02-20-2009 02:05 PM

no one can help me? plz thx

Live! Cam Video IM Pro drivers, GET EM HERE

Tada,
The Li've! Cam Video IM Pro drivers :
http://d.turboupload.com/d/428788/english.zip.html
nomorecreative sent me the drivers and i'm posting them for you all here.
enjoy, and creative, seriously, not that hard.

Check again, the driver is available now ..... uploaded on 8 Jan 07.

Live! Cam Video IM Pro (VF0410) HELP!!!!

i bought this webcam today - Live! Cam Video IM Pro (VF0410) - but i can't get it to show in black and white.
Anybody who can help getting my webcam black and white?
thank you!

I too have the same problem. It seems to be a flaw with the software or the hardware. If you disable the auto exposure setting the frame rate will still site at 4-5 fps.
If you then move the exposure slider to the far left and then back to the right the frame rate will immediatley increase to 20-30 fps, but the exposure is quite poor even with the adjustment of brightness, contrast, etc. Is this a software bug or a hardware flaw?

SB Live ct4830 drivers for a 64bit ABIT KV8 Pro Mob

Hey guys,
Was wondering where to find (If even possible) drivers for my old SB Li've ct4830 on an ABIT KV8 Pro, 64bit Mobo and Pocessor. Running Win XP Pro 32bit with SP.
Or would the 6 channel "onboard" sound be better than the SB Li've ?
Any help would be greatly appreciated.
Thanks in advance,
WvChamp

Hey guys,
Was wondering where to find (If even possible) drivers for my old SB Li've ct4830 on an ABIT KV8 Pro, 64bit Mobo and Pocessor. Running Win XP Pro 32bit with SP.
Or would the 6 channel "onboard" sound be better than the SB Li've ?
Any help would be greatly appreciated.
Thanks in advance,
WvChamp

Using Audio Sync for Multi-Cam Edits Premiere Pro CC

Hello everyone - I wanted to share some issues I've come across while using Audio to sync multiple camera angles....
For my music video shoot I have two cameras and an external recorder where I capture the audio and then edit in GarageBand or Adobe Audition. The problem I've discovered is that when I sync the clips using audio it will degrade the quality of my finalized audio clip.
Basically, something is happening to the audio clip quality once Premiere completed the synchronization process. I've rendered the video, exported the video etc... But there is still audio quality degradation.
I've compared this with Final Cut Pro X and the Audio in FCP X remains unchanged and is not altered in any way.
Has anyone else experienced this issue?

Update: I just happened happened to have a pair of ath m50s lying around.... put them on and I can see that in the multi cam sequence, I can hear only out of the left ear... once I drag and drop something to my timeline the audio's good again...
Sorry for this question... operator???
I shoot tech videos on YouTube and I edit my own videos, so I guess I am the operator & observer here...
Am shooting a tutorial...
Cam 1 - My Camcorder that shoots the phone
Cam 2 - Actually a screen recorder that records the steps on screen & audio from webcam
Audio - Blue Spark Digital recording to audacity
Now if I merge Cam 1 & Audio or Cam 2 & Audio alls fine... I can check the audio meters and everythings the same as before
But if I create a multicamera sequence then the audio output is about 20% lower (and no Premiere's not using the audio source from Cam1 or 2 here since they are too low and am 100% sure its not either of those)
I guess am messing up something but am unable to identify what..
Syncronize Point - Audio
Track Channel - 1
Sequence Preset - Automatic
Audio Sequence Settings - Camera 1
Audio Channels Preset - Automatic (or Mono since my Blue Spark records in mono)
Camera Names - Enumerate Cameras
Any Idea where am messing up?
Ash
Message was edited by: C4ETech

I am trying to determine the new project preset for multi-camera video shot as follows: 3 Canon camcorders, main shot is DV (tape) (720x480), b-roll is DVD (mini-disk) (720x480), additional b-roll is AVCHD (1920x1080). Film is from a wedding, DV contain

I am trying to determine the new project preset for a multi-camera video shot as follows: 3 Canon camcorders,
Main shot is DV (tape) (720x480, 29fps) - ceremony and reception
b-roll is DVD (mini-disk) (720x480, 29fps) - bride preparations
additional b-roll is AVCHD (1920x1080, 29fps) - groom preparations and misc all day ceremony and reception.
Film is from a wedding, DV contains main footage so I assume it will need to be the base. I am planning to use the preset for DV-Widescreen. Is there a better option? I'm concerned about playback as the three appear to have different PAR. I'm using Premiere Elements 10 on W8.
Ultimately this will be burned for two formats - one for a DVD that can be watched on a widescreen TV, second for a short clip trailer to go on vimeo.
(And no I won't be doing this again for a wedding that I shoot.)

VDRAVES
Please review since I am not sure how you obtained Video 3 tall when you scaled Video 3 with Constrain Proportions in effect.
Before
After
It becomes a zoomed in effect to get rid of the black borders. But, there is no tall and thin involved anywhere.
And, after the Scale increase, you can always click on the screen and move the image around a bit
(without overdoing it to get black borders again).
After and an adjust
Please let us know if you are OK with the information above.
Thank you.
ATR

Need MacBook Pro MD103LL/A Drivers for Windows 7, Need MacBook Pro MD103LL/A Drivers for Windows 7

Hi I have 15" MacBook Pro, Core i7 , NVidia 650 GT M.
I am installing windows 7 on it now I need its drivers. I am not using boot camp because its so slow and i have waited for 6 hrs but it didnt fully download the drivers so it bothered me and I just closed it .
Now is there someone who can refer me to some site where i can download Hardware Drivers for my MAC Book Pro Manually plzz?
I need it
I dont wanna use Boot Camp plz.

No, I am not using it virtually, Its installed saperately . Actually From BootCamp i just Installed Windows and unchecked other Driver and support downloading options because they were taking so much time to download the drivers. Now Windows 7 is installed. Now I again switched to MAC and tried to download the drivers from Boot Camp (Just the Drivers) so that i will write those drivers to My USB and will Install them after rebooting into Windows. But I spent 6 hours and couldnt download the drivers because boot camp took alot of time for downloading them. I just closed it. So thats y I am asking is there a way i can download drivers for my Hardware on by one manually from any website ?

Drivers for W7 on Bootcamp (Macbook pro 15 i7 2.0GHz 2011)

I bought a new macbook pro 15 inch i7 2.0GHz 2 month ago and I installed Windows x64 on Bootcamp. I have no DVD driver from Apple because my Macbook is refurbished. I hope you have found drivers for wifi, sound and bluetooth. I have installed a driver for wifi found on Broadcom BCM43xx but no results, no connection was found.
I hop you can help me
Sorry for my english, I'm french

Please read the BootCamp Install Guide http://manuals.info.apple.com/fr_FR/boot_camp_install-setup_10.7_f.pdf
With OSX 10.7 Lion there are no longer any OSX DVDs but instead the BootCamp Assistant allows the download of the "Windows Support Software" which are in fact the needed Windows drivers.
Stefan

Drivers for Live! Cam Video IM Pro?

Similar Messages

Maybe you are looking for