Drivers for my touch didn't load properly

how do i reload my ipod touch , drivers didn't load proprly first time??

See the appropriate section in this Apple support document.
http://support.apple.com/kb/TS1538
B-rock

Similar Messages

Songs didn't load properly into itunes; each song is an album

I moved several albums of songs into itunes, but some of the albums didn't load properly, with each individual song going into itunes as an album itself. I went into the info for each song and found that the album name is correct, and the same for each song, yet they don't load under one album. Is there some way to get each song into its album besides just changing the album name? Is there some other setting in those songs that needs to be changed?

If you right click on them and select Get Info and go to the Info tab are they shows part of a complilation/different tracks of one album?
See:
Grouping tracks into albums.

U300 Touchpad Driver for Windows 8 Does Not Load Properly

I have spent a few hours with both Microsoft Premier Technical Support and (a very grumpy) Lenovo technician. They have both confirmed that the Windows 8 touchpad driver that is currently posted on the Lenovo site for the U300S does not load properly. It will, as many have reported, disable the touchpad altogether. There seems to be an issue with the loader installing files for both a Synaptics and a Cypress touchpad. This creates an apparent conflict that relegates the touchpad as useless.
If you choose to install this driver, I would recommend that you create a store point so that it can be easily recovered.
A standard mouse works just fine (albeit without any Win8 functionality).
***Lenovo should pull this damaging driver down from their site until a certified replacement can be prepared.***

Hi,
If the computer is OEM, please refer to the user guid manual to know how to boot into WinRE to recovery your system.
Meanwhile please try to enable or disable Secure Boot by referring this article:
Secure Boot
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03653226
Kate Li
TechNet Community Support

[Athlon64] RS482M4 ATI drivers for XP 64bit won't load

I have downloaded the XP64 bit drivers for the RS482M4 board on MSI and the setup fails on the driver with a message, "inf not found". The box is titled Thunk.exe. It is followed by another message that says failed to update the registry. I have tried this several times and have also tried downloading the drivers for xpress 200 from ATI as well and get the exact same error.
I have a the RS482M4 board with an AMD 64 3500+ processor and Windows XP 64. Currently the system is running with the standard VGA drivers included with Windows. Anything I can do to get the ATI drivers to load? Is this a known issue? Apparently all works fine with the 32 bit version of Windows XP.
Dave

Try unpacking the drivers and run the setup on the unpacked dir, sometimes that happens

Lost Drivers for iPod Touch

Hey guys, I have been trying to solve an issue that recently occured while trying to upgrade my iPod Touch with the update that came out yesterday. I was downloading the update, when I received the graphic on my iPod screen of an USB cable pointing to the iTunes icon. When I try to connect, I receive the "Found New Hardware" notification, and the PC recognizes that the iPod is in Recovery Mode. However, all the usual steps I've tried have been unsuccessful. I have ran msconfig only to find the Apple Mobile Device(recovery mode), without any drivers. I have re-download iTunes several times without any luck. Does anyone have any advice before, I buy a Zune? Do they still make Zunes?

Luvlabs, thanks for your help. Prior to this I had uninstalled/reinstalled iTunes several times, checked my services to make sure they were turned on. Today, I gave it another try with your suggestion of getting rid of QuickTime as well. For some reason, the actual download/installation of iTunes+QuickTime took HOURS. It got to the point where I received an error message stating that "iPod Services was not on", and was asking if I had the correct privileges(sp?). Then, the installation began to "Roll back action". At this point, I canceled the installation, rebooted and tried again. Installation took a few minutes this time. After messing around with the Power/Home buttons again. I succeeded in getting my iPod into DFU mode. Once there, I was able to reload the drivers and am currently reloading my once dead iPod. Thanks for your help.
-mcoduke

Omni 10 Windows 8.1 windows didn't load properly

When I turn on my windows 8.1 Omni 10 the screen won't slide up to get to log on screen. I keep restarting and occasionaly it will say please wait and give me options to fix problems or restart pc and neither option on screen works. So I restart and if I hold down the button while restarting it will come up preparing automatic repair. Bit locker recovery page comes up with option to enter key or skip drive. Nothing on this page works and have to force restart. Is there a way to get in so I can refresh?

Hello Moonrock, What is the Model number for that tablet? 32 GB or 64 GB? I couldnt tell you why your tablet is malfunctioning but you may be able to reset it back to factory.Holding down the start button and the Volume Down button simultaneously should open recovery options at startup.You would choose Troubleshoot/Reset your PC /NextHave you looked at this page for recovering the Omni? IF not, either options 3 or 4 would be what you need.HP Omni 10 Tablet PCs - Recovering Software on Your HP Tablet (Windows 8) | HP® Support The 32 GB tablets should have came with a micro SD card that holds a recovery partition in it but its not a bootable drive.The 64 GB tablets have the partition already on the main drive. Let me know if this helps.

Reformatted disk but restore didn't work properly, had to reinstall system and now having major kext errors

Basically I had to reformat my hard drive, and in order to do that I copied all the files from it to a disk image which I then used to restore through disk utility.
Now this worked as far as individual files go, but the OS for some reason didn't copy properly. After restoring from the image, the machine started up with an infinite pinwheel and apple logo, not going anywhere, so I eventually just reinstalled snow leopard from the original installer. This is fine as far as the system itself goes, but I'm having some very annoying issues - for one, some things which I had registered have reverted to trial versions (probably just a question of moving some preference files from the backup which got overwritten, shouldn't be too hard) but far more seriously, a bunch of kext extensions aren't loading, including one which is needed to run my external wifi antenna (the internal one is banjaxed, won't connect to any network unless you're sitting beside the router at all times).
Here's the console log. Why are these kexts not working, when they worked perfectly before the reformat? Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this. But more urgently, how do I get these extensions working again? Using airport isn't sustainable, I can't sit on the stairs every time I want to use the internet
12/06/2013 11:16:57
com.apple.kextd[12]
Failed to load /System/Library/Extensions/RT2870USBWirelessDriver.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:16:57
com.apple.kextd[12]
Load com.Ralink.driver.RT2870USBWirelessDriver failed; removing personalities.
12/06/2013 11:16:58
kernel
Previous Shutdown Cause: 5
12/06/2013 11:16:58
kernel
Warning - kext com.apple.driver.AppleIntelIntegratedFramebuffer has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
12/06/2013 11:16:58
kernel
Warning - kext com.apple.driver.AppleIntelGMA950 has immediate dependencies on both com.apple.kernel* and com.apple.kpi.* components; use only one style.
12/06/2013 11:16:58
kernel
Atheros: mac 12.2 phy 8.1 radio 12.0
12/06/2013 11:16:58
bootlog[40]
BOOT_TIME: 1371032202 0
12/06/2013 11:17:03
blued[41]
Apple Bluetooth daemon started
12/06/2013 11:17:03
com.apple.SecurityServer[27]
Session 0x5fbff962 created
12/06/2013 11:17:04
com.apple.kextd[12]
Failed to load /System/Library/Extensions/BoomDevice.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:17:04
com.apple.kextd[12]
Load com.globaldelight.driver.BoomDevice failed; removing personalities.
12/06/2013 11:17:04
mDNSResponder[30]
mDNSResponder mDNSResponder-212.1 (Jul 24 2009 22:34:12) starting
12/06/2013 11:17:04
com.apple.usbmuxd[23]
usbmuxd-296.3 on Jul 25 2012 at 00:28:37, running 64 bit
12/06/2013 11:17:04
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]
Login Window Application Started
12/06/2013 11:17:04
com.apple.kextd[12]
Failed to load /System/Library/Extensions/RT2870USBWirelessDriver.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:17:04
com.apple.kextd[12]
Load com.Ralink.driver.RT2870USBWirelessDriver failed; removing personalities.
12/06/2013 11:17:04
com.apple.kextd[12]
Failed to load /System/Library/Extensions/BoomDevice.kext - (libkern/kext) authentication failure (file ownership/permissions).
12/06/2013 11:17:04
com.apple.kextd[12]
Load com.globaldelight.driver.BoomDevice failed; removing personalities.
As you can guess, Ralink USB Wireless Driver is the one I'm having trouble with, although the other error you see, BoomDevice, is one of the apps which had been registered but has reverted to trial. The errors in console made me think it was a permissions issue, but repairing permissions, despite taking half an hour and modifying tons of files, did not resolve this issue.
How do I fix this, and also out of interest, why did it happen in the first place? I imagined formatting and restoring would be far, far less complicated than this O_o
EDIT: Should point out that obviously going from 10.6.8, the reinstall reverted to 10.6, and I haven't been able to upgrade since I can't get this internet kext working. Shouldn't be a problem though since the wireless driver was for 10.6.x...

Still struggling to understand why copying the entire root dir to a disk image and then restoring from that image did not, as expected, yield an identical system, and why I even had to reinstall after doing this.
Because there is a lot more going on under the hood than merely copying files.
The only way to do what you want is to use cloning software like Carbon Copy Cloner.
My advice is to rescue your personal files to a regular non-TimeMachine external drive, Zero erase the ENTIRE drive and install OS X fresh and update, then your programs from original sources and files from backup.
Then, make a bootable clone and you can copy that as many times as you want and each one is bootable.
Most commonly used backup methods
How to erase and install Snow Leopard 10.6

Updating drivers for Windows 8 boot camp

Hi there,
I just installed the full release version of Windows 8 (available through my University) in boot camp. However, the drivers for several devices aren't working properly and should be updated. My question is, if I update the drivers so that the devices are compatable with Windows 8, will the drivers then be mismatched when I revert back to OSX?
Thank you.

Sorry, didn't realize that there was a boot camp community - probably a better place for my question. I will repost there. https://discussions.apple.com/message/19847211#19847211

Drivers for HP Laserjet P1007 Printer

I have not been able to get the Drivers for Hp Laserjet P1007 Printer loading into my iMac Desktop.
HP sites dpo not open up for my required queries
thanks
s.s.kulkarni

Hi.
Follow these steps to install the printer:
http://support.hp.com/us-en/product/HP-LaserJet-P1000-Printer-series/3435678/model/3435679/document/...
Basiclly you would need to turn the printer on and connect it to your Mac.
From the Apple Menu click on Software Update and install the HP Printer Drivers v3.0.
Next the printer should appear under Print & Scan, if it isn't click the plus sign and add it.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, however when I touch them, they do not load and bounce back to the main screen. Any suggestions on how to fix?

I have purchased apps for my ipod touch and they are not loading properly. They appear on the screen, but when you touch them, they do not open and bounce back to the main screen. Any ideas on how to fix?

Try the basics from the manual:
restart.
reset.
restore.
iPod touch User Guide (For iOS 4.3 Software)

Cannot load drivers for C5.00

After instaling PC Suite when first connecting my C5.00 my PC (win 7 64 bit ultimate) consistently fails to load the drivers for:
USB OBEX
MTB USB Device
USB Phonet
USB LCIF
Subsequently I cannot use PC suite or OVi suite. I have tried uninstalling PC suite but each time I start again the same thing happens, even if I change USB ports.
I have successfully loaded same drivers on my Samsung laptop (WIN 7 64 bit home premium) using the same cable and can connect to PC suite OK.

Could you please try this?
I am not sure whether this will solve your problem but you could try this once.
1. Disconnect your phone from PC if connected.
2 .Open Control Panel and go to ‘Programs and Features’
3. From the list of available programs, choose ‘Nokia Connectivity Cable Driver’
4. Click on the ‘Change’ button on top toolbar.
5. In the setup dialog box that pops up next, choose ‘Repair’ and select ok. Wait for setup to complete.
6. Restart the computer if prompted.
7. Now connect your phone to the PC. Driver installation should complete and PC/Ovi suite (hopefully) should detect your mobile properly now.
Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
It will help me to serve you better !!!!!
Thanking You

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

Why isn't my iTunes store loading properly? It lists everything in text without images, and I can't seem to access the store when I try to search for music or movies etc.

1) The best way to relocate the iTunes library folder is to move the entire iTunes folder with all subfolders to the new path, then press and hold down shift as start iTunes and keep holding until prompted to choose a library, then browse to the relocated folder and open the file iTunes Library.itl inside it.
If you've done something different then provide some more details about what is where and I should be able to help.
2) Purchases on the device should automatically transfer to a Purchased on <DeviceName> playlist, but it my depend a bit on whether automatic iCloud downloads are enabled. If there is a cloudy link then the transfer might not happen. You can use File > Devices > Transfer Purchases. In iTunes you should also check out iTunes Store > Quick Links > Purchased > Music > Not on this computer.
3) Backup the device, then immediately restore it. In some cases you need to add a restore as new device into that equation. Obbviously not to be attempted until you're sure all your media is in your library. See Recover your iTunes library from your iPod or iOS device should it be needed.
4) I believe there is complimentary 1 incident 90-day support with hardware purchases, but no free software support for iTunes itself. AppleCare gets you a different level of support.
tt2

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

My Ipod touch does not work properly.When i charge it,it only works for 5 min.n gets discharge.I showed it to the apple store in banglore n the person told me its fine n It is working properly.Bt its not working properly.Can someone help

If after you charge it for about three hours and it only last about five minutes the battery is probably dead or there could be another hardware problem. I would go back to the Apple store and ask them specifically how can it be OK if the fully charged battery only lasts five minutes.

Hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .

Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

Drivers for my touch didn't load properly

Similar Messages

Maybe you are looking for