Drivers for ProBook 4540s (Microsoft Windows Ultimate)

As we can see at this HP page for ProBook 4540s drivers, it has not been offered drivers for both 32-bit & 64-bit versions of Microsoft Windows 7 Ultimate. I want to know whether drivers for those versions are available at anywhere &/or is it OK if I install drivers for an available version (Such as Windows Professional 64-bit version) in Windows 7 Ultimate. Will they be fully compatiable with the ultimate versions?. & anything I should know related to this matter would be great. I'm specially concern about "Windows 7 Ultimate - 64-bit" version, as I'm planning to install it on my new ProBook 4540s - i5, which I will buy very soon. Thanks

Hi ,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English:                                 http://h30434.www3.hp.com
Spanish:                               http://h30467.www3.hp.com
French:                                 http://h30478.www3.hp.com
Portuguese:                       http://h30487.www3.hp.com
German:                              http://h30492.www3.hp.com
Korean:                                http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese:         http://h30471.www3.hp.com/t5/community/communitypage
Thank you
George

Similar Messages

SSD for Probook 4540s

do probook 4540s with windows 7 ultimate 64-bit support SSD storage, and if it support, will it replace my HDD or my optical drive ?

Hi,
Normally we replace the HDD with SSD, you can use the ODD but you need more hardware for it. Replacing HDD with a SDD is very simple interms of hardware but recover software may take a bit longer. The following shows how in general which can apply to many other machines.
http://www.pcworld.com/article/192930/how_to_upgrade_your_laptop_hard_drive_to_an_ssd.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

How do I do this to use OVerdrive media on deviceThe Apple device must be formatted for use with Microsoft Windows. The iTunes setting 'Manually manage music-' must be enabled for the device before you can complete the transfer.

I cannot make these directions work
I downloaded media on Overdrive MEdia on my PC
I have the overdrive media ap on my I pod touch 4g
this media is suppossed to be compatible w/I pd touch
Notes on Transferring OverDrive MP3 Audiobooks…
Most MP3 capable devices should play OverDrive MP3 Audiobooks.
If you intend to transfer OverDrive MP3 Audiobooks to an Apple® device, note the following…
iTunes® v9.0.2 (or newer) is required.
The Apple device must be formatted for use with Microsoft® Windows®.
The iTunes setting 'Manually manage music…' must be enabled for the device before you can complete the transfer. Adjust this setting in iTunes as follows…
Connect the iPod® to your computer.
If it does not launch automatically, open iTunes v9.0.2 (or newer).
In iTunes, locate the device in the left vertical navigation panel (under heading 'DEVICES'), and click the device.
The 'Summary' screen is displayed.
Place a checkmark next to 'Manually manage music…'.
Click the 'Apply' button.
The iTunes 'Summary' screen refreshes, and the changes are saved.
If desired, close iTunes.
Note that if an Apple device is connected to your computer, you can choose to simultaneously transfer a title to the iTunes Library and the Apple device. If you wish to only transfer a title to the iTunes Library, you must first disconnect the Apple device

Recovering your iTunes library from your iPod or iOS device: Apple Support Communities
Also you said " I want to add them to my iCloud, and also back to my computer. " Note that unless subscribe to iTunes match, only iTunes purchases are stored in iCloud.
Also,
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Windows 8.1 ATI Radeon 8750M Drivers For Probook 450 G1

I installed windows 8.1 into my Probook 450 G1 and I could not find any ATI Radeon 8750M drivers to it. The windows 8 drivers are not working properly in windows 8.1 .
This question was solved.
View Solution.

Try drivers from here:
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=5405422&spf_p... - Graphics
ELSE
Try installing HP Support Assistant which will automatically download and install drivers/updates:
HPSA Link:
http://www8.hp.com/us/en/campaigns/hpsupportassistant/hpsupport.html
Wish you luck,
Karthik
--Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
--Please mark the post that solves your problem as "Accepted Solution"

Drivers for LaserJet CP1515N using Windows 7 64 bit

This question was solved.
View Solution.

The Windows 7 x64 drivers for your printer are located here.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

I need all the drivers for HP 15-R074TU windows 7 32 bit

Please help me to find all the drivers for HP 15-R074TU notebook's windows 7 32 bit and any reference site where I can find if any driver or software is missing for my notebook.

Hi:
You should be able to use all of the W7 32 bit drivers and software from the HP Probook 450 g2.
Your model uses the Intel HD graphics driver.
DO NOT USE ANY BIOS OR FIRMWARE FILES FROM THIS MODEL
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdHome/?sp4ts.oid=6943828&spf_p...

Problem updating windows drivers for ipad, problem updating windows drivers for ipad

Windows device manager see ipad with error. ! Finds driver but has a problem installing it. Ipad works ok with windows laptop.
Any ideas/suggestions ?

The most reliable information on running Windows on a Mac is most often not going to be your store or elsewhere but from ATI and Nvidia.
Apple does not provide graphics drivers anymore than Microsoft does, just something basic is all.
Nvidia - pls. check their web site for information first - has said they would in 2009 provide mobility drivers, for any and all platforms and users.
A Mac running Windows is just a personal microcomputer. And all laptops have faced trouble with graphics.
NVIDIA® is making it easier than ever to get the most capability and performance from your notebook by making NVIDIA® GeForce® notebook drivers available on NVIDIA.com. These drivers deliver sharp, crystal-clear, on-the-go graphics with lightning fast performance for games, videos, and images, all while maintaining manufacturer customizations, including hotkeys.
And one more thing – NVIDIA notebook drivers now bring NVIDIA® CUDA™ technology to notebooks for the first time, including NVIDIA® PhysX™ technology for the latest games.
http://www.nvidia.com/object/notebook_drivers.html
Mobility driver for GF 9M Vista 32-bit:
http://www.nvidia.com/object/geforcenotebook_winvista_179.48beta.html

Unable to install XP drivers for Deskjet 3650 on Windows 7

I have a HP Deskjet 3650 that is connected via USB to my main computer running Windows 7. I can print without problems I am having problems sharing this printer with 2 other computers running Windows XP. I have downloaded the drivers for XP and extracted them onto the Windows 7 computer.
On the properties of the HP Deskjet 3600 Series printer, I have clicked on the Sharing tab.
Share this Printer and Render print jobs on client computers are both checked.
When I click on Additional Drivers, only X64 is checked and says yes under installed.
The other two options (Itanium and x86) are both unchecked and say no under installed.
I tried checking x86 and clicking OK. I'm then prompted to install print drivers and Browse to where the print drivers are located. I browse to the 3600/enu/drivers/win2k_xp folder and see hpf3600k.inf When I click Open, and select OK, I get a Selected Printer Driver Not Found Error which says The specified location does not contain the driver hp deskjet 3600 series (LIDIL) for the requested processor architecture.
On one of the XP machines, I have installed the printer software and am only able to print if I physically plug the printer into it.
On the other XP machine, I have not installed the printer software but I have download and extracted the drivers. When I click on the Add Printer Wizard and select the printer on the network, it tells me that I am about to connect to a printer on the Windows 7 computer and says that it will automatically install a print driver on my machine. I click Yes to allow it to continue and it tells me that the server for the hp deskjet 3600 printer does not have the correct printer driver installed and that I can click OK to search for the proper driver. I click OK and browse to the folder that I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a Install Driver Error window that says Windows cannot locate a suitable printer driver. Contact your administrator for help locating and installing a suitable driver.
So, it appears to me that the driver that I am downloading from the hp site for Windows XP is not the appropriate driver, am I wrong here?
How can I get this printer to work print on all 3 computers without having to move it from one to the other. The printer has to be physically connected to the Windows 7 machine as the other 2 are in the kids' rooms.
This question was solved.
View Solution.

Try the following: on the XP machine go to the Printers and Faxes folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK, then click on have disk and point at the directory where you have unzipped the XP driver.
On the XP machine you have already installed the driver do the following: go to the Printer and Faxes directory, right click on the Deskjet 3650, select Properties, Ports, Add port, Local port, New Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Tecra M7 - Where can I get drivers for Vista x64 or Windows 7 x64?

Hello,
I have a nice M7 tablet and I have to admit that despite all the problems on the hardware I like the notebook however toshiba is quite sad, and they never released any 64bit drivers for windows vista or windows 7 so what am I supposed to do? toshiba does not provide support for this computer seriously.
like toshiba is really absurt, last year I contacted them about a problem with my digitizer, dust was getting in between the plasstic and the LCD through the latch on top and they told me that they will format my computer and all viruses will be gone??? I was like, I dont want a format, physical dust is getting in my screen....
just because it is a discontinued model doesnt mean they can stop providing driver updates for the system.
It is a 64bit cpu, it supports 4 GB of ram, it is a tablet pc yes the hardware is probably 4 years old or more but still it is the best tablet I have ever used, I paid 2000+ USD (Tecra models are business models or they used to be) and toshiba is not providing drivers..........
Dont tell me to install 32bit win7 or vista, that makes no sense, I have 4 GB of ram, I have a 64bit cpu but a 32bit os that is totally bs too
Anyone know where I can find drivers, when I call tech support they tell me to ....

Hi
First of all I agree with you that Tecra notebooks are expensive and are business notebooks but you shouldnt forget that on 32bit OS the most applications are running properly and some older applications they are necessary in business sometimes not running properly on 64bit OS.
So I think for business 32bit OS is fast enough because you use 3.2 GB RAM that you should be enough if you dont play new 3D games.
Of course it would be nice to have 64bit drivers but you can collect http://aps2.toshiba-tro.de/wlan/ it yourself. The most Vista drivers are also work on Windows 7 so you should look for Vista drivers.
Here are some examples where you can search:
[www.intel.com]
[www.realtek.com]
http://aps2.toshiba-tro.de/bluetooth/
http://aps2.toshiba-tro.de/wlan/
Good luck!

Problems finding drivers for late 2008 MBP Windows xp 64

Hi,
I'm having problems installing drivers for Windows xp 64 bit pro. The main problem is that i have lost the leopard install disc that came with the mac. As far as i know the drivers located on the leopard install disc 1 are compatible with Win xp 64?
Does anybody know where i can get a complete list of all the correct drivers to download? I've been doing trial and error driver installation for about 1 week now and getting really upset that i have not been able to resolve this issue.
Any help greatly appreciated,
Thanks in advance,
Fredrik Christensen

Fredrik Christensen wrote:
Hi Stefan,
Thanks for replying.
Perhaps i am thinking of Windows Vista 64 then? I'm pretty sure that i saw a post somewhere which said that Apple released 64 bit drivers with the latest leopard install disc for the new MBP.
Fred
Hi Fred,
yes, Vista 64-bit is supported on some MAcs. See here: http://support.apple.com/kb/HT1846
Also Applee sems to have released newer versions of the retail Leopard Installation discs, which include Vista 64-bit drivers http://support.apple.com/kb/HT1999
Regards
Stefan

Has anyone sucesfully installed 6750m drivers for MBP 2011 bootcamp ( windows 8.1)?

I am struggling with this for 2 days. I cannot get it working. I tried it via setup and manually via device manager. The problem is "yellow excalamation mark" next to the driver (the details says : "Windows has stopped this device because it has reported problems. (Code 43)".
My specs: i7 4*2.2ghz, 16gb ram,intel HD 3000 + 6750M 1GB
Has anyone sucesfully managed to installed this drivers?

On a preUEFI Mac, using EFI boot will cause Graphics and Audio issues at a minimum. You will need to use a MBR method for it to work properly. On a dual GPU MBP, CSM-BIOS does not expose the Intel integrated GPU to Windows (because Windows has no drivers for switching between the two GPUs), but as you can tell, EFI Boot does not know that, hence your issue.
From BC info.plist...
<key>PreUEFIModels</key>
        <array>
                <string>MacBook7</string>
                <string>MacBookAir5</string>
                <string>MacBookPro10</string>
                <string>MacPro5</string>
                <string>Macmini6</string>
                <string>iMac13</string>
        </array>
Reference - How to identify MacBook Pro models - Apple Support

Drivers for NVIDIA Geforce 320m (Windows 7).

I've got my new MBP 13", but i don't have a cd with the bootcamp drivers for the video card, because I've lost my recovery DVD. So i'm seeking help with that. I wonder where can i get these drivers, because NVIDIA ones, even beta, not supporting this chip yet. Maybe i can get a recovery dvd iso or dmg somehow. I've got bootcamp 3.0 and 3.1 update installed on my windows machine, but still no luck, because the 3.1 version is dated mid january and my MBP is mid 2010.
Message was edited by: lazycoder

Somewhat related, my 13" MacBook Pro with BootCamped XP freezes when I open up BootCamp from the control panel and move the brightness slider/window around. To fix this, I'm trying to install the newest NVidia drivers.
With a NVIDIA GeForce 320M display card installed, trying to install the newest NVidia drivers on XP, I continuously get an error say "The NVIDIA Setup program could not locate any drivers that are compatible with your current hardware. Setup will now exit."
One way to solve this, as suggested by someone on another forum, was to install the drivers manually, and at the 99%~100% during installation, when it shows the error message "Your installation cannot continue, will revert back to your old display drivers when you click OK" at which point I don't press OK, but immediately hold the power button down for 5 seconds, after I re-boot, my new drivers work fine.
Except,
I can't control brightness from the control panel's bootcamp slider, nor keyboard shortcuts, it's continuously 100% brightness.
I've been working on this problem for 2 days, and I can't yet properly install the new NVidia drivers into XP. Any advice would be greatly appreciated.

Workaround for Scan issues - Scan without Drivers for any OS..Windows, Apple, Linux, Ubuntu..

Dear All,
You can scan without any drivers for hp network printers. Here is the video how to do that...
http://www.youtube.com/watch?v=HbWpgww5I-M
Happy Printing.
Click on the "Thumbs up"button on the left to say "Thanks"
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

The solution works except that it is limited to a single page plus you don't have the option to select the ouput format. To me the solution is to get the driver for the printer working properly as it did when the product was first purchased.
I thought that the problem was limited to Windows 7/8 but I now find the same problem is happening running under XP.
I think the solution is to buy a non HP product where there is some form of assistance offered by the vendor as I am finding that HP isn't interested.

HP does not show any drivers for my P1006 under windows 10

My Laserjet P1006 will not work now that I am using windows 10. HP does not show that they have new drivers for my P1006. Will HP be coming out with new drivers.

Hi,Drivers should beocme available for Windows 10, as you may find listed below:http://support.hp.com/us-en/document/c04658195 In the meantime connect the printer and try following the HP Printer Install Wizard, it may detect a compatible driver for yoru printer:http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e016-1&h_keyword=dg-PIW If that fails you may also try installing the Windows 8.1 drivers, there are good chances those will work on Windows 10:http://ftp.hp.com/pub/softlib/software12/COL21058/bi-55362-7/ljP1000_P1500-HB-pnp-win64-en.exe Regards,Shlomi

Unable to locate BIOS update for Probook 4540s

In an attempt to fix a "plugged in, not charging" issue I would like to update the BIOS for this machine as recommended in this thread. I have already attempted the suggestion to unplug and remove the battery from device manager so I started looking for the F.60 bios update. Unfortunately all of the links I find (for example) don't seem to be functional and the update is not listed under the driver downloads page for that product. Any help would be appreciated. Thanks.

Hi bimtp, first of all, it is an absolute joke what is offered on the driver pages by HP currently. For my 4740s i can find 2 (TWO) different drivers for Win8.1/64. There was another official page to get your drivers from which doesn't seem to exist anymore. The solution for you might be the HP Softpaq Download Manager. Hp Softpaq Download Manager
It is not a very nice tool to use but you eventually find the drivers you seek. If there are questions about how to configure that tool i will try to answer them as good as i can.

Drivers for ProBook 4540s (Microsoft Windows Ultimate)

Similar Messages

Maybe you are looking for