Drivers for Sanyo 7.1 MP VPC-E760 Digital Camera

I just bought a Sanyo 7.1 MP VPC-E760 for my daughter and noticed that it doesn't mention support for OSX in the instructions.
Can anyone tell me where I could download the drivers for this Sanyo Digital Camera?
Thanks,
Steve.

First off give it a try
If iPhoto does not handle it, try image capture (in your applications folder)
Next would be to buy an external memory card reader - usually that will take care of it
And, of course, the Sanyo web site and support site/support forums
Good Luck
LN

Similar Messages

Sanyo VPC-HD1000 Digital Camera & FCP

I am interested in a good camcorder which is disc based to work with FCP. Can anyone tell me if this will work please?
The Sanyo HD1000 records video in Full HD (1920 x 1080 pixels) and also takes 4-megapixel digital still images. The Sanyo HD1000 utilizes the advanced MPEG-4 AVC/H.246 video format and features a 10x optical HD lens and a large 2.7-inch widescreen display. The new SANYO Xacti HD1000 weighs only 268g and has a total volume of only 272 cubic centimetres. It incorporates advanced MPEG-4 AVC/H.264 video compression, enabling up to approximately 85 minutes of Full HD (1920 x 1080) video recording or over five hours of TV-quality (640 x 480) video recording onto an 8GB SDHC Memory Card (memory card sold separately).

FCP doesn't support the format that the camera shoots don't think. There is a way you could transcode the video most likely, but I'd look in another direction to avoid this because it's time consuming and most likely will hurt the picture quality.
And FWIW, any MPEG recording device isn't the best with render times, conforming times etc.. If you've the budget for a capture card things change a bit... but then, you might have bought a camera whose format is supported instead. One of the things that makes supported disk based recording nice is the fact you don't have to transcode the files... and they import faster than real time. But that camera's video will not work directly with FCP.
How much can you spend? What sort of video work do you do? If you want to do a lot of compositing (effects work), I'd look at an HVX-200, but that camera would cost more than a consumer rig... however it's picture quality will blow away any consumer camera.
If it were me, and on a budget, I'd look at a 3 chip or CMOS chipped HDV camera rather than what you're looking at... with this format, you could work natively with the video, or get an inexpensive card to transcode it to a friendlier post format... like ProRes...
Jerry

Best transcoding for AVCHD .MTS files taken with Lumix digital camera?

I have a point-and shoot camera that does 1080p hi-def video (Panasonic DMC-SZ7) --
It creates files in
/mnt/camera/PRIVATE/AVCHD/BDMV/STREAM
. For example:
% ls /mnt/camera/PRIVATE/AVCHD/BDMV/STREAM
total 3.8G
-rwx------ 1 asdf asdf 1.3G Aug 10 08:24 00000.MTS*
-rwx------ 1 asdf asdf 927M Aug 10 11:28 00001.MTS*
-rwx------ 1 asdf asdf 1.6G Aug 10 20:05 00002.MTS*
Here's the `mediainfo` dump for one of those files:
General
ID : 0 (0x0)
Complete name : 00000.MTS
Format : BDAV
Format/Info : Blu-ray Video
File size : 1.30 GiB
Duration : 11mn 12s
Overall bit rate mode : Variable
Overall bit rate : 16.6 Mbps
Maximum Overall bit rate : 18.0 Mbps
Video
ID : 4113 (0x1011)
Menu ID : 1 (0x1)
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : No
Format settings, ReFrames : 2 frames
Format settings, GOP : M=3, N=15
Codec ID : 27
Duration : 11mn 12s
Bit rate mode : Variable
Bit rate : 15.7 Mbps
Maximum bit rate : 16.2 Mbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Interlaced
Scan order : Top Field First
Bits/(Pixel*Frame) : 0.253
Stream size : 1.23 GiB (95%)
Audio
ID : 4352 (0x1100)
Menu ID : 1 (0x1)
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : 129
Duration : 11mn 12s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 15.4 MiB (1%)
Text
ID : 4608 (0x1200)
Menu ID : 1 (0x1)
Format : PGS
Codec ID : 144
Duration : 11mn 11s
As you can see, 11 minutes of video at 30 FPS takes up just over 1.5GB.
My question: is there a more efficient encoding that would require less space but not lose much quality?
I have handbrake, ffmpeg, etc installed but I really don't understand this.

skottish wrote:I'm curious, at that big of a drop how's the quality?
Not discernably better or worse. Certianly acceptable for my purposes, no surprises.
skottish wrote:What's the output of mediainfo on the new file?
General
Unique ID : 215024101460296907370475472157250113814 (0xA1C422B52828C4B6AB74501A60E35116)
Complete name : 00000.mkv
Format : Matroska
Format version : Version 2
File size : 345 MiB
Duration : 11mn 12s
Overall bit rate : 4 309 Kbps
Writing application : Lavf55.12.100
Writing library : Lavf55.12.100
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 4 frames
Codec ID : V_MPEG4/ISO/AVC
Duration : 11mn 12s
Bit rate : 4 031 Kbps
Width : 1 920 pixels
Height : 1 080 pixels
Display aspect ratio : 16:9
Frame rate mode : Constant
Frame rate : 29.970 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.065
Stream size : 323 MiB (94%)
Writing library : x264 core 133 r2339 585324f
Encoding settings : cabac=1 / ref=3 / deblock=1:0:0 / analyse=0x3:0x113 / me=hex / subme=7 / psy=1 / psy_rd=1.00:0.00 / mixed_ref=1 / me_range=16 / chroma_me=1 / trellis=1 / 8x8dct=1 / cqm=0 / deadzone=21,11 / fast_pskip=1 / chroma_qp_offset=-2 / threads=12 / lookahead_threads=2 / sliced_threads=0 / nr=0 / decimate=1 / interlaced=0 / bluray_compat=0 / constrained_intra=0 / bframes=3 / b_pyramid=2 / b_adapt=1 / b_bias=0 / direct=1 / weightb=1 / open_gop=0 / weightp=2 / keyint=250 / keyint_min=25 / scenecut=40 / intra_refresh=0 / rc_lookahead=40 / rc=crf / mbtree=1 / crf=23.0 / qcomp=0.60 / qpmin=0 / qpmax=69 / qpstep=4 / ip_ratio=1.40 / aq=1:1.00
Default : Yes
Forced : No
Audio
ID : 2
Format : AC-3
Format/Info : Audio Coding 3
Mode extension : CM (complete main)
Format settings, Endianness : Big
Codec ID : A_AC3
Duration : 11mn 12s
Bit rate mode : Constant
Bit rate : 192 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 48.0 KHz
Bit depth : 16 bits
Compression mode : Lossy
Stream size : 15.4 MiB (4%)
Default : Yes
Forced : No
Text
ID : 3
Format : PGS
Codec ID : S_HDMV/PGS
Codec ID/Info : The same subtitle format used on BDs/HD-DVDs
Default : Yes
Forced : No

What is the preferred video file format for iMovie? About to purchase POS digital camera w ability to record HD Video.

I am about to purchase a digital point and shoot camera with the ability to record HD video. I plan on importing all pics and video to iPhoto and want to begin creating iMovies combining photo's and the video clips.
It seems from the many posts that .MOV is supported in iMovie, but many posts in the community seemed to suggest that .MOV does not always work in iMovie.

YEAH, but "iMovie" changes the "camcorder Mts" files into "mov" files and
this causes some lost of movie quality. To maintain the highest quality
camcorder movie quality you must not change the "mts" files. However, if
you want to "merge" any of your camcorder movies (and you most likely
will) any merging also changes the "mts" files to "mov" etc., so you will still
loose movie quality. "There appears to be no way to avoid loosing picture
quality once you decide to change the "Mts" files to something other".

Help me find the right digital camera for my wife for Christmas!

Hi guys,
I have been scouring Best Buy for days trying to figure out which digital camera to go with. My wife wants a new one for Christmas, but she doesn't want a traditional point and shoot setup, nor a full DSLR (simply becuase I can't afford it!). Plus, my budget is $200-$300.
I've been looking at a factory refurbished Olympus SP-800UZ model for $230 in the outlet center, but I'm not sure if it's a good camera or not.
So, any ideas of which camera to get her?
She wants something with over 12 MP, something with a nice zoom, and something that has the look and feel of a DSLR.
Any suggestions in my price range? Thanks!

Olympus Factory-Refurbished 14.0-Megapixel Digital Camera - Titanium
Model: SP-800UZ | SKU: 1233313
Capture special memories with this 14.0MP digital camera that features 27 shooting modes to snap photos of a wide variety of subjects in various situations. The high-definition movie mode lets you record at 1280 x 720 resolution for stunning results. This product has been refurbished by the manufacturer. Learn more.
5 Read reviews (3)
Sale: $229.99
As to the specific camera you mentioned - yes, it's excellent. Note the Lens Focal Length(s), 35mm equivalent 28-840mm and the 30x optical zoom. Impressive for the price range. You could stop here and be satisfied, assuming you added a memory card since it only has 2mb of internal memory. (don't worry, they are cheap, this one takes SD only).
Still, I would consider what I said above, take a quick look before going the 'Refurbished' route.
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Snow Leopard does not auto adjust time for digital camera

For some reason when I connected my digital camera this morning to auto adjust its time to reflect DST I ended up having to do it manually. Is this not a feature of SL? I did this a hundred times in Tiger without hassles. Maybe I am missing something. I am not using iPhoto for my imports.

I'm curious what software you are referring to. I doubt this is the fault of SL but rather a change in the Canon software. I know Canon's "Camera Window" has changed over the last while if that is what you are referring to but I don't remember seeing a time setting in it ever. Can you look back at the name and version of the software you are referring to?

Can't find drivers for ipod nano 8GB for windows vista HELP

I am trying to find the drivers for my ipod nano 8GB. I am running Windows Vista on my laptop. I have tried absolutely everything listed on this webpage and others. I have removed itunes and reinstalled it and still nothing. I downloaded usbstor.sys and usbstor.inf. I have gone into my computer and clicked on the ! next to my ipod in file manager and have gotten nowhere! This has been 5 days of frustration. I don't understand why apple would not just SUPPLY the software for the nano. I am beyond frustrated now. Can someone please help...

Something is going on with your Nano if Vista doesn't see it anymore. Did you use device manager and try to uninstall your Nano? Perhaps this will work. Once uninstalled, the next time you plug it in, Vista will see the Nano as a new device and install the proper USB drivers.
I'm not on my Vista computer right now...but here's an article to help you find device manager in Vista: http://kb.wisc.edu/page.php?id=5183
Good luck!

HP LaserJet P2035n Drivers for 64bit XP

So I tried to use the HP email and live chat support but neither worked because they said my p/n or s/n were invalid and I am pulling them off the printer itself. The issue I am having is with a HP LaserJet P2035N. It is hooked to the network and the driver for xp work the PLC5 ones. I have one computer that is running XP 64 bit and when I go to download the drivers for it there are no network driver for the printer only local drivers. I called the 1800 number and they gave me a website to go to that just redirected back to where I was. Any advice?

The model number HP LaserJet P2035N.
Method 1:
You may refer to the below links and use the troubleshooters. Check if it lists and helps resolve any issues: Open the Printer troubleshooter:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3662026&...
Method 2:
You may check if you have the latest drivers installed for the device. You may refer to the below link for getting the latest drivers and check.
Hp LaserJet P2035n Driver
Good Works..

Anybody found Vista x64 drivers for nVidia GeForce 8600M GT (Macbook Pro)?

These guys at Apple are launching 64-bit Leopard and I still cannot find 64-bit graphics drivers for my laptop under Vista. It makes me sick. Their Boot Camp 1.4 vesion contains only 32-bit drivers.
It's the laptop manufacturer (Apple company) who are responsible for providing me with drivers, not the graphics card manufacturer (nVidia).
I have been waiting for 5 months already and will wait for another 1-2 months and if the drivers don't appear I'm going to sell the laptop because I simply cannot watch DVDs, I cannot play games without properly installed grahics card.
If you have the drivers, please let me know.
Best regards.
Message was edited by: Melnyk

first of all, I think apple will never really "support" windows 64bit...
anyway
try -> http://www.laptopvideo2go.com/
my vista 32bit works with the drivers from this page.
but u need to read the "Quickstart Guide" before you try installing the drivers
cheers

When I attempt to log on to I tunes I get the following message "The registry settings used by the I tunes drivers for importing and burning CDs and DVDs are missing This can happen as a result of installing other CD burning software Please reinstall

When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill Martin

I can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu.

Need Working Drivers for Macbook 2,1 running Windows 8 (64-bit) using Boot Camp 5 (Mountain Lion)

So I found my old Macbook 2,1 on Leopard the other day and decided to make it my dedicated Windows computer. I wanted to run Windows 8 on it, so I figured out I needed Boot Camp 5. Then I realized Boot Camp 5 only runs on Mountain Lion, so I went though the process up updating it (had to use MLPostFactor since it's techincally unsupported on my mac.) After getting it updated to Mountain Lion, I went and used Boot Camp 5 to install Windows 8 64-bit. However, when I try to load any Boot Camp Driver Files (I've tried the drivers for BootCamp 3, 4, and 5) it says it is unsupported on my computer model. I suspect this is because of the fact that Windows 8 shouldn't be on my computer. Without these files, I can't right click, among other things, which is pretty important. Can anyone help me get these drivers loaded?

According to the Boot Camp System Requirements located here: http://support.apple.com/kb/HT5634
Your Macbook 2008 does not support Windows 8.
Mac model
Windows 8
64-bit
Windows 7
64-bit
Windows 7
32-bit
Windows Vista
64-bit
Windows Vista
32-bit
Windows XP
32-bit
MacBook (13-inch, Mid 2010)
4
4
DVD
DVD
DVD
MacBook (13-inch, Late 2009)
4
4
DVD
DVD
DVD
MacBook (13-inch, Mid 2009)
4
DVD
DVD
MacBook (13-inch, Early 2009)
4
DVD
DVD
MacBook (13-inch, Aluminum, Late 2008)
4
DVD
DVD
MacBook (13-inch, Early 2008)
4
DVD
DVD
MacBook (13-inch, Late 2007)
4
DVD
DVD
MacBook (13-inch, Mid 2007)
4
DVD
DVD
MacBook (13-inch, Late 2006)
4
DVD
DVD
MacBook (13-inch, Mid 2006)
4
DVD
DVD

Unable to install XP drivers for Deskjet 3650 on Windows 7

I have a HP Deskjet 3650 that is connected via USB to my main computer running Windows 7. I can print without problems I am having problems sharing this printer with 2 other computers running Windows XP. I have downloaded the drivers for XP and extracted them onto the Windows 7 computer.
On the properties of the HP Deskjet 3600 Series printer, I have clicked on the Sharing tab.
Share this Printer and Render print jobs on client computers are both checked.
When I click on Additional Drivers, only X64 is checked and says yes under installed.
The other two options (Itanium and x86) are both unchecked and say no under installed.
I tried checking x86 and clicking OK. I'm then prompted to install print drivers and Browse to where the print drivers are located. I browse to the 3600/enu/drivers/win2k_xp folder and see hpf3600k.inf When I click Open, and select OK, I get a Selected Printer Driver Not Found Error which says The specified location does not contain the driver hp deskjet 3600 series (LIDIL) for the requested processor architecture.
On one of the XP machines, I have installed the printer software and am only able to print if I physically plug the printer into it.
On the other XP machine, I have not installed the printer software but I have download and extracted the drivers. When I click on the Add Printer Wizard and select the printer on the network, it tells me that I am about to connect to a printer on the Windows 7 computer and says that it will automatically install a print driver on my machine. I click Yes to allow it to continue and it tells me that the server for the hp deskjet 3600 printer does not have the correct printer driver installed and that I can click OK to search for the proper driver. I click OK and browse to the folder that I extracted the drivers to and see that hpf3600k.inf is located in the folder and click OK and I get a Install Driver Error window that says Windows cannot locate a suitable printer driver. Contact your administrator for help locating and installing a suitable driver.
So, it appears to me that the driver that I am downloading from the hp site for Windows XP is not the appropriate driver, am I wrong here?
How can I get this printer to work print on all 3 computers without having to move it from one to the other. The printer has to be physically connected to the Windows 7 machine as the other 2 are in the kids' rooms.
This question was solved.
View Solution.

Try the following: on the XP machine go to the Printers and Faxes folder, Add a Printer, Local Printer, Create a Port, Local Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK, then click on have disk and point at the directory where you have unzipped the XP driver.
On the XP machine you have already installed the driver do the following: go to the Printer and Faxes directory, right click on the Deskjet 3650, select Properties, Ports, Add port, Local port, New Port, \\Computername\Printername (use the actual share name for the shared computer and printer), OK.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Cannot find drivers for HP laserjet 1000

for the love of GOD, can someone tell me why this is so difficult?
I'm on OSX 10.6.8 and the one printer that apple did not install drivers for is the one I am using: HP LASERJET 1000.
I have scoured the forums, and the queries that have been answered date back to four years ago, with the referenced links leading to non-existent sites.
Finally, I found some information.
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
What, pray tell, do I need to do to print something? Why is this so difficult?
Please help save a human life today; give me the answers.
It's good karma
PS: contrary to my product listed, this matter concerns an iMac, not a macbook pro. thanks!

Joni Chacho wrote:
I downloaded the open-source drivers called foo2zjs, but along with those you need FOOMATIC RIP and GHOSTSCRIPT, available from the Linux Foundation. Without the latter, the former won't work!
Thing is, the download links for FOOMATIC and GHOST don't work. I get a loading reset error
https://wiki.linuxfoundation.org/en/OpenPrinting/MacOSX/foomatic
That page is an old page. It should have redirected you to http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/foomat ic .
Message was edited by: Matt Broughton

HP ZR2740w drivers for Windows 8.1 x64

Where can I find the drivers for windows 8.1 for this monitor?
Please note that the Win7 x64 drivers are not accepted by Win8.1 x64.
Adding it as legacy hardware with the INF provided by the Win7 install program doesn't work either.
Please help! I bought these two monitors just a year ago and now they're useless already!

Hey there. I'm also looking for the same. Was there ever anything released?
Thanks!

Drivers for Windows 7. HP Pavilion g6-2337sr

People, please, I can't find the drivers for my laptop HP Pavilion g6-2337sr for Windows 7. What drivers will be OK for it? I mean, what types or names, how can I find them? if anyone know
This question was solved.
View Solution.

You're very welcome.
I don't know what that device does. I just don't like missing drivers.
Do me a favor so I can investigate further...I am very sure the driver I attached should have worked.
Go to the device manager and click on the smbus controller needing drivers.
Then click on the Details tab at the top of the smbus controller driver window.
Now you should see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the second item (Hardware ID's).
Post the top string of characters you see in the window.
You can see that this forum member used the drivers I posted for his g6 which has the same hardware as yours and all the drivers worked including the one I attached.
http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/Downgraded-to-Windows-7-from-WI...

Drivers for Sanyo 7.1 MP VPC-E760 Digital Camera

Similar Messages

Maybe you are looking for