Drivers for Sound Blaster Live

I am getting an older computer together for my grandmother and upgraded it to Windows 2000 from 98. The original drivers do not work with 2000 so I have tried to find the current drivers. I have tried different PCI slots, downloaded the drivers from Creative, and I get a message that I don't have a Sound Blaster installed.
This card came in the computer which is a Compaq EP 6350. I have also been to their site and downloaded the drivers they have all with no luck. The computer is identifying the card as a Mulitmedia Audio Controller not a Sound Blaster. Any suggestions?THank you

You may be able to download the install CD for your card from here.
lcruz wrote:
Sorry, you are english speaker.
I have the same problem to you and I hav not the CD.
Can you send mi the drivers please
Thanks
Message Edited by Katman on 05-08-2006 02:06 PM

Similar Messages

  • Can't install drivers for sound blaster live Telling me there isn't a sound blaster card install

    I am doing a fresh install of xp on a machine. This machine had no hardware issues before I formated the dri've and re-installed windows xp.
    Everytime I go to install the drivers for the sound card I get an error message telling me that setup cannot find a sound blaster card installed on the system?
    I even pulled a known working li've card from the machine I have downstairs. Put the card in and started up the machine. The driver pack is still telling me there is no card installed. I've tried three different pci slots as well.
    I even went as far as re-installing windows xp without service pack 2 integrated and even that didn't help!!!
    Is there some kind of fix that I am missing?

    the unipack download from creative will not work. first, try asking around if somebody else has the same 5. creative card as yours. the only solution for your problem is to use the installation cd that came with your creative card. I lost mine so i went to a pc repair shop and inquired if they have a copy of such cd - they normally do.
    . you need to remove all the programs concerning creative from add remove programs. 2. shut down, and remove the sound card. 3. turn the pc on and let windows boot normally. install the the softwares and drivers using the cd that came with the box. 4. shut down and install the sound card 5. turn on the pc. windows will find a new hardware and will find the right drivers bec you have previously installed them. There is absolutely no need to reformat your hard dri've.

  • Can't install drivers for Sound Blaster Live! No ctzapxx.exe file

    As above, I had to reboot my system and used a disk eraser as I wanted a clean slate. So obviously I have to reinstall the drivers for diff things such as sound card, USB 2.0 card etc. Everything goes fine until I get to installing the drivers for the Sound Blaster Li've!?I inserted the disc and installed the drivers, then I restarted Windows as requested. When it loads back up it'sdetects the sound card and trys to install the driver, but it can not find the driver anywhere, not on the PC or on the CD. After looking into things I thought I would go down the approach using the ctzapxx.exe file mentioned here - <a target="_blank"]http://93.95.7.84/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=4,E=000000000033636605,K=5285,Sxi=8,Answer2655 5=obj(26555)bj(26559[/url])?But for some reason this file isn't on the CD, which is what I think is stopping me from installing the drivers. My OS is Windows XP SP2. I have files that a similar in name to ctzapxx.exe , but they don't seem to do anything. I am usual ok with computer software but hardware and BIOS etc isn't my strong point as you may have gathered. I'm hoping someone knows how to sort this as it is a real pain not having any sound. Any help will be much appreciated!If you need anymore details to help identify the problem I'll provide them ASAP. Thanks in advance,Andy

    the unipack download from creative will not work. first, try asking around if somebody else has the same 5. creative card as yours. the only solution for your problem is to use the installation cd that came with your creative card. I lost mine so i went to a pc repair shop and inquired if they have a copy of such cd - they normally do.
    . you need to remove all the programs concerning creative from add remove programs. 2. shut down, and remove the sound card. 3. turn the pc on and let windows boot normally. install the the softwares and drivers using the cd that came with the box. 4. shut down and install the sound card 5. turn on the pc. windows will find a new hardware and will find the right drivers bec you have previously installed them. There is absolutely no need to reformat your hard dri've.

  • Definitive Vista Driver for Sound Blaster Live!

    Is there a "definitive" 3rd party driver solution for the Soun Blaster Live! 5. (including Dell Digital version) that enables all features including the digital out If no one agrees on a single solution can we get a list of options here. Here is what I have seen so far http://forums.creative.com/creativel...ssage.id=23567 http://forums.creative.com/creativel...scending&page= http://www.aeonity.com/david/creativ...vista-download Sound Blaster Live! - LiveDrvUni-Pack (English) KX project driver Anything else Which is best Anything new

    Download Sound Blaster CD ISO?s:
    http://hosted.filefront.com/BadBoyforum
    Creative Li've! 5. Digital Drivers:
    http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
    Message Edited by Rad-Wulf on 07-27-200709:28 PM

  • Sbl-soundfonts: soundfont midi lib for sound blaster live

    Something I needed for midi tests of my sound blaster live card.
    The first soundfont file was suggested as the best general soundfont library available for free (8MB). The second is from my sb live install cd (4MB). If you only want the first one remove second source file and second md5sum. You will need asfxload from awesfx package (http://bbs.archlinux.org/viewtopic.php?p=77155) to load the library.
    More info and soundfont libraries are available at:
    http://www.linux.com/howtos/MIDI-HOWTO-10.shtml
    http://www.euronet.nl/~mailme/index4.html
    http://www.synthzone.com/soundfont.htm
    http://alive.singnet.com.sg/musician/
    http://listen.to/sblive
    http://www.indezine.com/products/sound/soundfonts.html
    http://www.soundfont.com/
    http://alsa.opensrc.org/index.php?page=asfxload
    http://alsa.opensrc.org/index.php?page=emu10k1
    http://alsa.opensrc.org/index.php?page= … ntHandling
    pkgname=sbl-soundfonts
    pkgver=1.0
    pkgrel=1
    pkgdesc="SoundFonts files for SoundBlaster Live!"
    url="http://www.creative.com"
    depends=('awesfx')
    source=(http://www.alsa-project.org/~james/sound-fonts/8MBGMSFX.SF2 CT4MGM.SF2)
    md5sums=('568ddfaa56db2bb45fc96e28dcc711ad' '1652dfbefe914bdb8dc03afc0c76f619')
    build() {
    cd $startdir/src
    install -d -m755 $startdir/pkg/usr/share/soundfonts
    install -m644 *.SF2 $startdir/pkg/usr/share/soundfonts

    I recently answered about the same question:
    If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

  • Manual for Sound Blaster Live! CT4670 needed

    I'm looking for the manual of the Sound Blaster Li've! CT4670 card in English or German. Somebody has got this manual in PDF format or knows a source where I can download it's

    0Re: Manual for Sound Blaster Li've! CT4670 needed" CT4670 = SB Li've Value according to here,
    ?http://support.creative.com/kb/ShowA...=ws:,case=0846
    so using that here is a link to the manual,
    http://support.creative.com/manuals/download.aspx?nDownloadId=2386&prodName=Sound%20Bl aster%20SBLi've!%20Value%20User%20Manual

  • Drivers needed for Sound Blaster LIVE VALUE - Model 4780

    I had to move my SB Live Value card model 4780 S/N 4780210008722, to another computer and require new drivers for the SB card which has a gaming port.
    I have a 3.0 gig IBM Think Center box using Windows XP SP2.
    I tried the DOWNLOAD area Creative provided but found the information very confusing as to what drivers and patches to download. First it said to download except if I did not have the original installation drivers (which I don't have), but then it says to download the drivers as an upgrade.
    Again, they don't address clearly what I should download for a basic installation which includes use of the game port for use with flying type software. I have 2-3 joysticks consoles i'd like to use on my newer computer using the CT 4780 SB card.

    Look at your Private Messages on the top of the site.

  • Windows 7 - 64 Bit Driver Needed For Sound Blaster Live! 5.1 Model SB0100

    I am having trouble finding a working driver for Windows 7 - 64 Bit for a Sound Blaster Li've! 5. Audo Card Model# SB000
    I downloaded driver file SBL_PC64DRVBETA_LB_2_03_0005.exe which I think is a 64 Bit Sound Blaster Li've! update, but Windows 7 does not allow it to be installed because it is not a digitally signed driver. It also seems Creative is no longer supporting these old cards with new driver updates.
    I love the card though. I have bought more recent sound cards and the sound of this card is still much better than the more recent sound cards I have bought. So I would like to keep using it if possible.
    Are there any driver solutions?

    I recently answered about the same question:
    If you?use Vista or Windows7, then there is no official driver. You can only use alternati've drivers like Vista Support Pack by Daniel_K or the one from KXProject (better). But if you have more than 2 gigs of memory installed or an x64 OS, then both drivers will be half-working (as far as I remember, Daniel's driver won't work with more than 2 Gb of memory installed in any OS, and with KX-driver there will only be a problem with MIDI playback with more than 2 Gb AND x64 Win7).

  • Need help to find drivers for Sound Blaster X-Fi MB windows seven 64bit

    hello!,
    I have a Creative Sound Blaster X-Fi MB card which is given whith the Foxconn motherboard BloodRage,it worked fine under windows vista 64 bit,but now with windows seven 64 bit when I go of "creative console laucher"? or "creative Audio console" "karaoke"?no works.(media source and wave studio seems ok)
    I tried to find drivers for windows seven 64 bit but I can't find this sound card in the list of products.
    thank you for your help

    great!!!
    I'm going to test it immediatly....
    hope it's ok.....thanks for the very quick answer

  • OS X Drivers for Sound Blaster Z???

    I bought a Sound Blaster Z yesterday, and noticed on the Creative support page for the card that it supported MAC OS X. Does anyone know where the drivers are for this? Thanks.

    feigenluis wrote:
    hi guys I'm new here, I'm trying to find the old drivers for the sound card Creative SB AudioPCI 64V (WDM) but I couldn't find it in here, I need the drivers for windows XP, that soundcard is on a laptop, but the brand of the laptop is not common(connectrix MCP88TF), and the funny thing is that I loaded the drivers from the recovery/drivers CD but W XP doesn't recognize them.....
    any help/link will be more than welcome...
    Thanks in advance
    feigenluis
    If those drivers bundled w/ the installation or Creative/Ensoniq or drivers for ~equal model don't work you better contact directly to the manufacturers support.
    jutapa

  • Speaker setting software for sound blaster live 24

    helo,??i need the speaker setting software for soundblaster li've, i downloaded the latest driver and basic audio suite but it does not have graphic equilizer and many other stuff where is itt?

    Originally Posted by engineering
    Hi 115AAT,
    I notice that there is a link "application" that can be clicked. There are applications listed on the site. There may be applications that you are looking for.
    I have tried to use these applications, but once the setup starts it always says "Setup could not detect any Sound Blaster Audio Card on your system. Please ensure that your Sound Blaster hardware is properly installed before running this Setup program." Then it exits and the application never works.
    My sound card is working properly, and all of the drivers are installed, I just cannot seem to access the features that the CD allows you to, like the equalizer or bass boost.

  • Driver for Sound blaster Live! SB0060 @ Win7 64 bits

    Hi there, would be great to get the proper link to drivers, already tryed a few of them from creative website, but doesn't work at all, thanks in advance S.

    Download Sound Blaster CD ISO?s:
    http://hosted.filefront.com/BadBoyforum
    Creative Li've! 5. Digital Drivers:
    http://es.europe.creative.com/support/downloads/welcome.asp?bEOSLAgree=yes&action=next&sOSName=&re gion=3&MainCategory=266&Product_Name=Li've%2+5%2E+ Digital&Product_ID=853&modelnumber=
    Message Edited by Rad-Wulf on 07-27-200709:28 PM

  • Dos Drivers for Sound Blaster

    I'm searching for .
    I just need to load drivers only on dos is loaded, nothing more.
    I was searching long time.
    Help me, please.

    http://easymamecab.mameworld.net/html/snddosdr.htm
    Read that and get the SBPCI.zip file it links to. If your sound still doesn't work in DOS, then you might need to modify the AUTOEXEC.bat file in C:\ to accpet it. Namely, you'll need to specify where the drivers are (SET SOUND= ) and the parameters for the card (SET BLASTER= ). Look at the below link for help.
    http://retailsupport.ea.com/tech_support/how_to/settings.htm

  • Data Sheet for Sound Blaster Live (4810 or 481

    Is it possible to download the hardware data sheets for this PCI 6 card??Specifically, I need to know the speaker out specification (impedence? diameter and type of stereo jack? max current and/or voltage). Thanks,Joe

    Sorry about the repeated posts. I unintentionally hit submit twice, and submitted a third time when I received an error (didn't think the first one made it through).

  • Need help for sound blaster live 24 bit upd

    i downloaded the update for the soundblaster li've 24 bit but when i click on the update nothing happen no options on the screen it only show that is extracting the file what can i do about it

    did you tried cmss ON and stereo surrond on ?

Maybe you are looking for

  • Calling RFC from R/3

    hey, can someone please help me ? I have a requirement where i need to pass a list of values like an ITAB from R/3 program to XI. How do i do that ? No file interface. RFC adapter is used. Shud I write an RFC enabled function module in R/3 and call i

  • Still wonky after all the tests

    I've posted this issue here and on the iMac5 discussion and still have the problem of periodically having my cursor make boxes around everything, the dock refusing to come out of hiding, having mail and firefox open but having to click on them for th

  • Original date on photos

    Hello, I use Photoshop Elements to edit photos. Even after editing with P.E. I can see the original date the photo was taken (as well as the modified date). When I import into iPhoto, I get a brand new date (the date of import) and cannot see the ori

  • (PSE 11)After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  Please help.

    After installing Mac OS X Yosemite, the brush tool doesn't allow me to "paint."  It just puts a dot there.  I am using Adobe Photoshop Elements 11.   Please help.

  • KONP KONWA in Datasource

    I am enhancing a delivered datasource to include inventory shrinkage. The shrinkage is stored in the R/3 table KONP as a condition record. It could be a percentage or a price per unit. I created an InfoObject in BI for KONWA with the same data type a