DRIVERS for T42 Type 2378 - FZU w/ Intel PRO/100 CardBus II

Hello All,
I have just re-installed WIndows XP Professional on my T42. The only thing I have installed onthe machine at the moment is my Office 2007, and I was trying to locate all the drivers I need to load back onto my system.
In order to atleast connect to the internet so I can download ll the drivers I need, I was trying to get my driver installed for the Intel PRO/100 CardBus II. I downloaded the driver available off of Intel's website and have attempted to install it numerous times, and after it installs, it says it cannot locate the driver? I have gone through all the obvious troubleshooting (uninstall and re-install) and nothing is working. My device manager recognizes my Intel PRO/100 CardBus II under Network Adapters, but Other Devices section has yellow question marks and exclamation marks on Ethernet Controller and the rest of the items listed in the Other devices sub category.
I am thinking that maybe there is a better driver download somewhere or something? Any help would be appreciated!
Thanks much!

Hi StephG8,
Is there a specific reason behind your not installing the drivers from lenovo website?:- http://www-307.ibm.com/pc/support/site.wss/MIGR-55386.html
Also remember, installing lenovo drivers is a two step process, the first setup file extracts itself to a given or default folder in C:\drivers...... you subsequently have to go there and run second setup from there.
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

Which kernel module for Intel PRO/100 S Desktop Adapt

Which kernel module I should load for support LAN Card "Intel® PRO/100 S Desktop Adapter" Board ID "751767-004" , Based on Controller 82550

Finded in /usr/src/linux-2.6.5/drivers/net/Kconfig
config E100
tristate "Intel(R) PRO/100+ support"
depends on NET_PCI && PCI
select MII
---help---
   This driver supports Intel(R) PRO/100 family of adapters, which
   includes:
   Controller Adapter Name Board IDs
   82558 PRO/100+ PCI Adapter 668081-xxx,
   689661-xxx
   82558 PRO/100+ Management Adapter 691334-xxx,
   701738-xxx,
   721383-xxx
   82558 PRO/100+ Dual Port Server Adapter 714303-xxx,
   711269-xxx,
   A28276-xxx
   82558 PRO/100+ PCI Server Adapter 710550-xxx
   82550 PRO/100 S Server Adapter 752438-xxx
   82559 A56831-xxx,
   A10563-xxx,
   A12171-xxx,
   A12321-xxx,
   A12320-xxx,
   A12170-xxx
   748568-xxx
   748565-xxx
   82550 PRO/100 S Desktop Adapter 751767-xxx
   82559 748592-xxx,
   A12167-xxx,
   A12318-xxx,
   A12317-xxx,
   A12165-xxx,
   748569-xxx
   82559 PRO/100+ Server Adapter 729757-xxx
   82559 PRO/100 S Management Adapter 748566-xxx,
   748564-xxx
   82550 PRO/100 S Dual Port Server Adapter A56831-xxx
   82551 PRO/100 M Desktop Adapter A80897-xxx
   PRO/100 S Advanced Management Adapter
   747842-xxx,
   745171-xxx
   CNR PRO/100 VE Desktop Adapter A10386-xxx,
   A10725-xxx,
   A23801-xxx,
   A19716-xxx
   PRO/100 VM Desktop Adapter A14323-xxx,
   A19725-xxx,
   A23801-xxx,
   A22220-xxx,
   A23796-xxx
   To verify that your adapter is supported, find the board ID number
   on the adapter. Look for a label that has a barcode and a number
   in the format 123456-001 (six digits hyphen three digits). Match
   this to the list of numbers above.
   For more information on how to identify your adapter, go to the
   Adapter & Driver ID Guide at:
   http://support.intel.com/support/networ … /21397.htm
   For the latest Intel PRO/100 network driver for Linux, see:
   http://appsr.intel.com/scripts-df/support_intel.asp
   More specific information on configuring the driver is in
   <file:Documentation/networking/e100.txt>.
   To compile this driver as a module, choose M here and read
   <file:Documentation/networking/net-modules.txt>. The module
   will be called e100.

How to configure Intel Pro/100 ethernet in PXI-8176 controller for RedHat Linux kickstart installation?

I have trouble configuring the Intel Pro/100 ethernet for the PXI-8176 controller during the kickstart installation. Did anyone have better luck?

Not with Linux but...
I had trouble setting it up for RT.
There is an issue with the chipsets used and the firmware of the 8176 when sizing the bus.
There was a KB article.
NI support should be able to chase down your details for you.
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Dont find the correct video drivers for my T61 + windows 7 ultimate + intel pm965 video card

Hi Experts,
I am keep getting the stop error 0x00000116 failing with a blue screen while im browsing. I have observerd this quite a few times and also I could not find the correct video drivers for my t61 thinkpad in the ibm site. I could see the details as wxp & windows vista but not for win 7. Please find the link below which has all the video drivers fro t61. Please help me find the correct customized video drivers fro my t61 + win 7. Hope you understand my problem.
By the way i just use for home computing and my win 7 is upto date wiht no extra software and games installed. I dont play games at all on my t61.
my t61 specificaitons : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-67883
If you see the link http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67853
if u search in the baove link ,you cannot find the video drivers for t61 + win 7. You have it only for xp & vista in this section. Intel X3100 (940GML, 945GM, GL960, GM965). there are no video drivers for win 7 for t61. my video card info is
Video chipsets:
Intel PM965/GM965 graphics. (15.4 inch).
my video card is Intel PM965 chipset . Please help me to get the correct customized version of the video drivers for my thinkpad as I am getting this problem with video drivers and its getting restarted when I am in the middle of something. But it works find after that. I have tried to install drivers from intel and its saying i have customized version of lenovo drivers and I should contact you guys. I triedcomplete win 7 update from windows site and installed all patches and still getting the problem intermitently, but after restart it works fine. No hardware or software changes. Its that I need the correct version of video drivers for win 7. Please inform the lenovo about this and ask them to develop the good video drivers for win 7 + t61 model. Hope you understand my situation.
Please let me know if you need any kind of info so that i can provide.
thanks for reading the mail.
Regards,
Manu

Are you kidding me ? You dont work for Lenovo and you are an active volunteer here in this forums. I have seen your replied many times and wont get paid by Lenovo, you are really crazy for ur stufee .Anyways thanks a lot for the link and the original lenovo staff were notable to provide the link and you could. Well I have tried that what you have said nd still I could not get the link, here you go..
http://www-307.ibm.com/pc/support/site.wss/product.do?doccategoryind=50880&template=%2Fproductpage%2...
Let me install the drivers from your link and I will reply soon, so who ever search in this forum now , there wont be any problems for t61 windows 7 video drivers because of u. You are awsome.wll reply my results soon.

Does my Intel PRO/100 VE Desktop Adapter have auto-negotiate?

My two desktops have all but identical hardware & software (both run XP Pro SP2). I use no router or hub (at least not between these two computers) and for security and other reasons, connect PC 1 to a CAT 6 cable for web surfing and downloading. Occasionally, however, I'll want to back up those youtube videos I download to PC1 onto PC2. I've been using flash drives to do this, but I was curious whether this could also be done via the Intel Pro/100VE NICs in both pcs. Once this simple pc-to-pc network is set up, I thought that during a backup session, I'd just have to disconnect PC2's CAT cable from the house Internet jack, connect the cable between both NICs make a copy of the file(s) that I want to send from the C drive of PC2 to that of PC1 and click send.
However, I've read that the first step is to have valid connectivity between the NICs. That is, you need a CAT crossover cable, not the CAT patch cable I have. OR one, if not both NICs need to have auto-negotiate capability. During a file sharing session, auto-negotiate (which I think is the same as auto-detect, ditto Auto-MDIX, ditto Auto-MID-X) senses that the cable is a patch configuration and electrically re-routes the connections as a crossover (for what I think the Wikipedia calls Full Duplex data communication).
Thus, I connected both NICs with the patch cable. But in Explorer on both PCs, when I click on Network Connections, click the NICs icon, click Configure, click Advanced click Link Speed and Duplex scroll to Auto Detect and click OK, I can't get the NICs to communicate (ie. the red X stays on the icons and the LEDs on the NICs don't light).
So does anyone know if 1.) The Intel Pro/100VE NICs have auto-negotiate. 2.) If yes, how do I enable it or is it done automatically when I connect a patch cable instead of a crossover cable? 3.) If these NICs do have auto-negotiate and if it's fully plug & play, what else has to be done to get these NICs to talk to each other?
Can this kind of NIC to NIC card file sending via CAT 5 cable be done without having to load the Windows XP CD every time I want to transfer files from the hard drive of one pc to that of the other?
And does this involve little more than creating a unique IP address for each of the pcs. If yes, can someone please provide a step-by-step procedure?
Message Edited by chane on 02-16-2009 06:31 PM

Hello,
Try the following URL for help on this interface:
http://www.opensolaris.org/os/community/laptop/wireless/;jsessionid=D977D56D1808AFBA7DD28EB0CA3FF6D6
HTH
Tom

Need Drivers for T42 (2374)

I upgraded my thinkpad T42 with Windows XP Professional and now am missing a ton of drivers. I can't even get wireless to work.
Any help would be greatly appreciated.
Thanks,
st
Solved!
Go to Solution.

OK, to start you off with something:
Ethernet driver:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-62922
After downloading it, you must unpack it from C>Drivers>Win>Ethernet
Wireless card:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-67214
C>Drivers>Win>Wlanath
The basicprinciple is the same for all drivers. Just watch the path where a particular driver is downloaded in the Win subfoleder, and unpack it from there.
Hope this helps
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Unable to download boot camp win 7 drivers for my imac 27 inch imac(intel) plz help,can i download the drivers manually by booting from windows 7,

links plz for downloading windows 7 drivers ,no sound in win 7,using os lion

Hi, I don't know the answer to your problem, was hoping somebody would pipe in, but I guess not.
Maybe run Linux within OSX?
VirtualBox...
http://www.virtualbox.org/wiki/Downloads
Might even try asking over on my site...
http://x704.net/bbs

T42 (Type 2378) Rescue and Recovery text not showing up in GUI

I have a machine that I hit the IBM button to restore my system back to its factory settings. It loads up fine but when I hit the [Restore your system] it pulls up a new window and has 3 bullets I can select from, but there is NO text on the window. Not even the < Back or Next > or Cancel button texts are showing up. I need to restore it but I don't know which bullet to select and if I select a random one, the next screen pulls up but still no text. Any ideas?

Thank you! I had to change my fast preview settings. I chose OpenGL Active instead of Wired Frame. Although, I'll have to play around with it because I got an error message last night that said it caused the program to crash.

Toshiba drivers for WXP and VISTA fpr a Satellite Pro P100 - PSPAH

Hello.
I need help. I bought a Satellite pro P100 - PSPAH with Vista Premium Home edition as recovery version. Now I want to install a second OS like WXP on this notebook. The problem is that WXP didn't found 3 drivers. For Sound, LAN and a other device. Because of this I update my notebook with the latest chipset drivers, but the problem is still there. Vista has now problems with the drivers, too. I cannot find the special driver on the main page from toshiba.
mfg jens

Hi
I understand your problem At this time I prefer also the XP instead of the Vista OS.
The Vista needs simply too many notebook resources and all the applications and 3rd devices are not 100% supported by Vista.
But what to say dude seems you have to search for compatible drivers on chip manufacture sites.
Download and install a tool hardware diagnostic tool called Everest or similar one and try to find out what LAN and sound chips are used in your notebook!
Then you could search for the drivers on Intel, Realtek, etc.. pages
Do you know the Toshiba Canada driver site???
http://209.167.114.38/support/Download/ln_byModel.asp
There you will also find some Pro P100 series. Try these drivers. It's worth a try.

Drivers for 250 G3 (K3W99EA#BED), Rev. 2213-100

Greetings, I bought a 250 G3 laptop (K3W99EA#BED), Rev. 2213-100 (using Intel Celeron N2840) and it came with a Windows 8 OS. As I need Windows 7 for some of the applications I'm running, I decided to downgrade. Upon trying to install the drivers from the official 250 G3 site, all of them gave me an error saying "This system does not meet the minimum requirements for installing the software". I'd like to know where I could find the suitable Windows 7 drivers (64 bit)? I would like to thank everyone for help in advance!

Hello The web page seams to have problems. I suggest you to install HP SoftPaq Download Manager
This software detects what drivers are missing and auto update it.
For more information consult:
http://www8.hp.com/us/en/ads/clientmanagement/drivers-bios.html?jumpid=va_r11260_go_clientmanagement_ssml#system-sw-mng
To download:
ftp://ftp.hp.com/pub/caps-softpaq/HP_SDM_Setup.exe Regards

Solaris 10 on x86 Integrated Intel PRO/100 VM not recognized

I just installed Solaris 10 on a compaq evo 510 and the adapter is not recognized. I did not get any network config questions during the install. I have ran sys-unconfig and same thing. I typw ifconfig -a and I only see the loopback. Any help would be greatly appreciated. I am very new to the unix environment. This card appears to be on the HCL and I have searched everywhere and tried many different things to no avail. thanks in advance.

For booting Arch you will need to update bios in ThinkPad 600E.
http://download.lenovo.com/ibmdl/pub/pc … sdin36.exe
After that, you will be able to boot from cd without any problem, but problem with network is still persistent. There seems to be some issue between PCMCIA interface and sound on ThinkPad 600E, but I still havent found a way to fix it.

MOVED: Help!! Where can i get WD SATA Drivers for winXP-64 Bit

This topic has been moved to Operating Systems.
Help!! Where can i get WD SATA Drivers for winXP-64 Bit

>>http://www.intel.com/support/chipsets/sb/CS-028823.htm<<...

Drivers for Live! Cam Video IM Pro?

Where can I find drivers for the Live! Cam Video IM Pro? It's not listed in the driver dropdown at http://us.creative.com/support/downloads/...

Check again, the driver is available now ..... uploaded on 8 Jan 07.

Oh my lord, where can I get windows drivers for Macbook Pro?....

Does Apple really not have any place that I can download Windows drivers for the hardware in my August 2010 Macbook Pro?!? I am trying to use windows through bootcamp, and I am having tons of trouble. I know there are supposed to be drivers in the OSX DVD that came with my computer, but that is all the way back in Maryland and I go to school in Tennessee.
<rant> Sorry if I seem irritated. I just got over a total hard drive crash in this computer that isn't even 2 years old. I have drives that are almost 10 years old in my PC desktop.. The drive that came stock with my Macbook pro was a total piece of crap in comparison to the cheapest notebook drives at Best Buy. Really Apple?? 5400 RPM 8mb Cache Hitachi drive?? *Pukes in mouth* </rant>

Sorry for the rant. This is what happens everytime I have tried. I actually have a booting Windows 7 partition on here already but it is barely running on the stock/generic windows drivers that are just there to get the OS through install.
I have an OSX 10.6 disk, but it is 10.6.0, and I wasn't even able to make that boot into the Mac installer when I installed OSX on the new hard drive. I had to run my Macbook as a Firewire disk plugged into a Mac Pro and install it from there and update to 10.6.8. I think this was because the 10.6.0 install disk doesn't have drivers for my 2010 revision of the Macbook Pro. I doubt that the 10.6.0 disk has the right Windows drivers if it doesn't even have the right Mac drivers.

LAN drivers for MSI 7005 for Windows 7?

I am running a Win XP PE USB for Macrium Reflect, made by Macrium Reflect and it asks or a Network driver. I suppose it wants a Windows 7 one as it used Windows 7 as a base when creating the CD. I've booted to the CD and just want to point it to Windows 7 Network drivers.
So i'm trying to download Windows 7 LAN drivers for it/
It may be RealTek LAN 10/100 driver though its not listed for Windows 7.
http://www.msi.com/product/mb/651M-V.html#/?div=Driver

Try the Vista drivers.

DRIVERS for T42 Type 2378 - FZU w/ Intel PRO/100 CardBus II

Similar Messages

Maybe you are looking for