Drivers for the dv6-1330ep

i am trying to see the drivers of this laptop: http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv6-1300-Entertainment-Notebook-PC-series/3999443/model/4058640#Z7_3054ICK0KGTE30AQO5O3KA30R1and the page loads more than 10 minutes and nothing shows thank u in advance for the answer

Hi ,
Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community!
I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion dv6-1330ep Notebook and issue with the drivers page. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers on your system that need updating. Here is a document on Hp Recovery Manager that will help you with any software and drivers that might need reinstalling. Hope this helps. Thanks.

Similar Messages

DVD drive drivers for HP dv6-6195sp

I recently formatted my HP Pavilion dv6-6195sp and installed Windows 7 Professional 64bit. Now, everything was ok until I noticed the system hadn't recognized the DVD drive. I went to the HP support site and searched the drivers for my computer and everything else was there, just not the drivers for the DVD drive. I called the customer support for my country and the lady there had no clue about what I was talking about and what was the solution for my problem. Anyone can give me some help?

Thanks for your quick reply.
I remembered in the meantime that about two weeks ago I sent my computer for a thorough internal clean up, and it might have happened that the technician accidentaly disconnected the cables that connect the DVD drive to the board. Now that I think of it, I remember using the DVD drive somewhere between the time I formatted the hard drive and the day I sent the computer for a clean up. I will head down to the store on Monday (since it is closed now) and see what I can find. If everything is plugged in correctly, I'll try your solution and come back for some feedback.
Again, thank you for your help.

HT3986 I got a macbook pro Retina and I installed a windows 7. The problem is I can't find drivers for the Macbook pro retina hardware which work for windows 7

I got a macbook pro retina and I installed windows 7. How can I get the windows 7 drivers for the Macbook Pro Retina?

Read the Boot Camp Instructions, you have to download the drivers using Boot Camp Assistant
If you missed that I suggest that you read the instructions again.

Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

Hey everyone,
I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
I searched drivers for the windows 8 32 bit but couldn't find any...
Any solutions guys?
Thanks a lot.
Sincerely,
Chiponn

There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
You'll need an external USB drive formatted as FAT for this.
1) In OSX, start the Bootcamp Assistant
2) Press Next
3) UNTICK 'Remove WIndows 7 or Later Version'
4) TICK Download the Latest Windows Support Software from Apple
5) Insert USB drive
6) Press CONTINUE
The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
Anyway, hope this post helps ;-)

How can i get windows drivers for the 2013 MacBook Pro Retina?

Hi there,
today I have installed on my late 2013 MBP retina via the Boot Camp Windows 8.1. The installation was smoothly but some drivers are not present including the wifi driver.
Through online research, I found out that in the current version of Boot Camp no drivers for the 2013 model are listed. Do you have one probably have an idea how to get it to run anyway?

For feedback from experienced users, post in the Final Cut Pro X forum here.
They should be able to offer suggestions for training.
Apple - Final Cut Pro X - Resources

I have a macbook pro 1175 its a 2006 model which boot camp will work i tried 4.03 but it says this boot camp is not for this machine thats the oldest one i found here please help i have windows 7 32 bit installed but need drivers for the sound

i have a 2006 mackbook pro running windows 7 32 bit i need drivers for the sound and the earliest bootcamp on here is 4.03 my machine says its not for this system please help which version of boot camp can i use

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

Windows Update installed the drivers for the wrong sound card?

I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.

Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF.

Drivers for the sunfire v20z network card.

does any one know were i could find the drivers for the sunfire v20z network card. and does anyone know the chipset of the card?

That's a software question.
This is a hardware forum.
You didn't specify, but I'll presume you are not talking about any add-on card.
The necessary software packages for the onboard
broadcom BCM5703 gigabit (bge) circuitry are native to Solaris x86 (4/04 and newer).
Therefore they'll be on your OS installation CD's.
Just install the OS and rock-n-roll.

Drivers for the Biometric Coprocessor for the ThinkPad W530

I am looking for the drivers for the Biometric Coprocessor for the ThinkPad W530 running Windows 7 (64-bit). Can anyone assist with this? Thanks!
Solved!
Go to Solution.

http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029769
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Drivers for the Apple External Modem in 10.5

Hi all! I recently upgraded my system with Leopard. All seems to be great save for the fact I can't use the external Apple USB modem attached to my Macbook Pro. While I don't fax that much I do sometimes have to use it to receive faxes and such from others. Is there a driver update for this for Leopard? Thanks to all in advance for the help!
Lance

The drivers for the Apple USB Modem are already installed along with Leopard..... I'm not sure why its not working.
Try opening up System Preferences - Network, and see if it shows up/if its enabled.
Other than that, I don't see why you should have any problems.

I am looking for pre-NI-DAQ drivers for the NI 455x DSA cards.

I have inherited an older piece of production equipment, and I need to find the older drivers for the NI455x DSA card. Is there an archive directory that contains the install information for the NIDSA fp's, dll's, etc.

The NI 445x DSA cards are supported by the NI-DAQ 6.9.1 driver currently available on the web at www.ni.com and follow the downloads link. You will also want to use the NI-DSA driver to program the NI-445x board which is also available at the download site.
Some older drivers are available at the download site by choosing all Drivers instead of current.

How To Install and Configure External Drivers for the JDBC & JMS Adapters

Hello colleagues,
Please I need a How To Install and Configure External Drivers for the JDBC & JMS Adapters version 7.10.
VERSION 7.10.
BBDD ORACLE - ojdbc14.jar
Regards.

Hi ,
Uisng Java Support Package Manager (JSPM) to deploy com.sap.aii.adapter.lib.sda file,
refer this two links,the procedure available how to deploy using JSPM.
http://help.sap.com/saphelp_nwpi71/helpdata/EN/33/e6fb40f17af66fe10000000a1550b0/content.htm
http://help.sap.com/saphelp_nwpi71/helpdata/EN/1f/c45b4211aac353e10000000a1550b0/frameset.htm
Regards,
Raj

Drivers for the Westell 6100 modem for my DSL?

Does anyone know where I can get the proper driver for my 6100 Westell modem? I have a yellow question mark in my device manager and i keep getting a no driver found for ethernet connection message.

If you are using ethernet, no drivers for the modem are needed.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

Where can I find Vista 64-Bit drivers for the Satellite A100-049?

I currently run Vista Home Premium SP1 32-Bit and do so because there appears to only be 32-Bit drivers on Tosiba's website:
[http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?macId=&mode=allMachines&userOS=& action=search&selCategory=2&selFamily=2&selSeries= 153&selProduct=700&selOS=2]
Where can I find Vista 64-Bit drivers for the Toshiba Satellite A100-049?
Thanks

Thanks for the reply.
That's rubbish. Vista 64-bit runs fine with 2Gb and my laptop supports up to 4Gb.
We'll never move on to 64-Bit if companies don't provide drivers.
I'll look at those sites. I've had trouble installing nVidia drivers from nVidia website.
I have to use the one provided by Toshiba.
Hopefully I won't find this when trying 64-Bit. My plan is to go 64-Bit with Windows 7 so no rush just yet.
As I understand it Vista drivers will work with Windows 7.
Thankfully when I reinstalled Vista 32-Bit not long ago using an OEM from Technet I only need 2-3 drivers from Toshiba website, most of it they give to download you don't need at all.
Thanks again.
p.s - They do offer 64-Bit drivers for my network card though.

Anyone have an updated link to the unspported drivers for the X-Fi series?

JAnyone have an updated link to the unspported drivers for the X-Fi series?dI honestly cannot believe what I'm reading about all the people having problems in Windows 7. Having just upgraded to it and being a loyal CL customer since I've been building PCs, decided to upgrade my Audigy 2 and bought an X-Fi Gamer only to be rewarded with the inability to install the drivers, and I find out I'm not the only one and it actually seems...very common...what? Are you even serious Creative? All these posts about people not being able to use your cards with Windows 7 and you don't do a thing? Anyway, if someone has a mirror for the supposedly working unsupported drivers that would be great, every mirror I've found is outdated. If someone has them and they work, great, but I'm seriously never buying one of your products again if this is how you do customer service. If not, newegg's return policy is great, Asus here I come, sooner or later

Nsame here broo i won't buy ever product from creative company. I realy tought it's best music card ever ( and expensi've for normal beaing ) but they are just funny with their customer support. anyway just pm me with mail adres ill sent you unsuported drivers, or you can download them from my site (but pm me first i need to make that they won't charge you for downloading it )

Drivers for the dv6-1330ep

Similar Messages

Maybe you are looking for