Drivers for USB, Ethernet Controller, etc

I am not able to locate the drivers for a few of my hardware devices. The hardware IDs are:
USB-Controller:
PCI\VEN_8086&DEV_1E31&SUBSYS_1818103C&REV_04
PCI\VEN_8086&DEV_1E31&SUBSYS_1818103C
PCI\VEN_8086&DEV_1E31&CC_0C0330
PCI\VEN_8086&DEV_1E31&CC_0C03
SM-buscontroller:
PCI\VEN_8086&DEV_1E22&SUBSYS_1818103C&REV_04
PCI\VEN_8086&DEV_1E22&SUBSYS_1818103C
PCI\VEN_8086&DEV_1E22&CC_0C0500
PCI\VEN_8086&DEV_1E22&CC_0C05
PCI-unit:
PCI\VEN_10EC&DEV_5229&SUBSYS_1818103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_1818103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
Ethernet-controller:
PCI\VEN_10EC&DEV_8168&SUBSYS_1818103C&REV_07
PCI\VEN_10EC&DEV_8168&SUBSYS_1818103C
PCI\VEN_10EC&DEV_8168&CC_020000
PCI\VEN_10EC&DEV_8168&CC_0200
Hope you can help out. Thank you very much!
This question was solved.
View Solution.

Hi:
Below are the links to the drivers you need...
PCI\VEN_8086&DEV_1E22: Install this driver first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102471-1&cc=us&dlc=en&lc=en...
PCI\VEN_8086&DEV_1E31:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103655-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_5229:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102462-1&cc=us&dlc=en&lc=en...
PCI\VEN_10EC&DEV_8168:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102459-1&cc=us&dlc=en&lc=en...

Similar Messages

Driver for the ethernet controller on a HP Pavillion P600000 Series desktop after upgrading to Windows 7 Enterprise?

After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model
No. p6710f. I located the drivers on HP's website, but Windows 7 Enterprise
is not listed as compatible. Compatibility list:
Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit), Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
The original driver (according to HP's site) is a Realtek PCIe Family networking controller, Version:7.26.902.2010 Rev. A.
I tried contacting HP, but apparently I voided their warranty once I upgraded to Windows 7 Enterprise. I do not have a support plan with Microsoft because the operating system was purchase through TechSoup (nonprofit). I greatly appreciate your help;
let me know if you need more information.

On Fri, 15 Jul 2011 21:36:53 +0000, microsoft_questions wrote:
After upgrading from Windows 7 Home Premium to Windows 7 Enterprise (x64) Service Pack 1 (build 7601), I cannot find working drivers for my ethernet controller. The desktop is a HP Pavillion, Model No. p6710f. I located the drivers on HP's website <http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=pv-89905-1&cc=us&dlc=en&lc=en&os=4063&product=5049513&sw_lang=>,
but Windows 7 Enterprise is not listed as compatible. Compatibility list:
Microsoft Windows 7 Home Basic (64-bit), Microsoft Windows 7 Home Premium (64-bit), Microsoft Windows 7 Professional (64-bit),
Microsoft Windows 7 Ultimate (64-bit), Microsoft Windows 7 (64-bit)
Windows 7 Ultimate and Enterprise are essentially the same with regard
to their software. Only the license is different. So if it's
compatible with Ultimate, it's also compatible with Enterprise.
Ken Blake, Microsoft MVP

Where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011)

where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011).
after the installation of windows 7 i cant use my wlan or audio.

http://www.apple.com/support/bootcamp/

T440 - DWM service is crashing in windows 7 64 bit after installing drivers for USB Replicator

Dear All,
Good day!,
This will be my first post to the community and looking forward for an expert advise on the issue am facing with Lenovo ThinkPad USB Port Replicator with Digital Video drivers in Enterprise 64bit running on T440, following are the details:
Environment:
Windows 7 Enterprise 64bit installed on T440 where all drivers are up to date for all devices though (System Update 5) tool.
Requirement: Usage of Lenovo ThinkPad USB Port Replicator with Digital Video (M01060) which will be connected to .
Steps followed:
Connected to the port replicator before installing the device driver.
Download and installed device driver from the link: http://support.lenovo.com/en_US/downloads/detail.page?&LegacyDocID=MIGR-73088
3. Issue: After installing the device driver above, system reboots and after logging back using the local admin account or any other windows account (DWM service) crashes along with any other software installed (Ms. Office, Lync, IE9, ...ext). Tried uninstalling the driver, rebooted and Windows runs smoothly again back with no errors.
4. Questions:
T440 hardware compatible with Lenovo ThinkPad USB Port Replicator with Digital Video ?
Which USB version Lenovo ThinkPad USB Port Replicator with Digital Video has ? (2.0 or 3.0) ? did I missed some special drivers for USB ?
Any other links for the above driver can be found for Win 7 Enterprise 64bit ?
For 3 days, am searching the web for a similar issue, found and followed all troubleshooting steps mentioned by others but none of them helped. I will really appreciate your support if any expert can advise. Thanks in advanced

I have the same problem with my T400 updated to Win 7 pro. Not happy.

Help finding drivers for usb multimedia keyboard model ku-0841 for windows 7 64 bit

Help finding drivers for usb multimedia keyboard model ku-0841 for windows 7 64 bit.
the volume keys on keyboard work how ever the on screen thing that shows you the volume doesn't come up anymore it only shows when I use my mouse to control the volume.

is anyone out there who cna help me?

Drivers for USB 3.0 Dock

Recently purchased X1 Carbon. Wiped drive and installed Windows 7 64-bit from existing image/clone. Connected USB 3.0 dock to laptop and installed all applicable drivers through both Windows Updates and the Lenovo System Update utility. As it stands, I have no ethernet connectivity through the dock even though the dock is recognized by the computer and the network activity lights (green and orange) are working on the back of the dock.
Currently all drivers are installed except:
- Lenovo USB Ethernet
- ThinkPad USB 3.0 Dock
- ThinkPad USB 3.0 Dock
Additionally, the Lenovo USB Audio shows, "This device cannot start." Presumably, this affects the head phone port of the dock.
What am I missing? No installation disk was included with the dock but I believe the Lenovo System Update utility should have taken care of that. Any suggestions would be appreciated.

For those who care, here is a link to the appropriate drivers. I find it disheartening that the Lenovo Software Update utility found drivers for everything else but this. Anyway, here is the link: http://support.lenovo.com/en_US/product-and-parts/detail.page?&DocID=PD023761

XP Drivers For USB Sound Blaster 0490

% After searching this site for hours, I can't find XP drivers for my USB Sound Blaster 0490. Any ideas? Or do Creative not support legacy hardware. Or could they just do with a search section to find drivers on their site.
Kind regards,
Hemlock

Hi Hemlock,
Are you talking about this driver if you are running 64bit.
Edit: I am not sure if you are running Win XP 32 or 64 bit so I included both.

Looking for NDIS2 driver for PXI ethernet controller.

I need to find a DOS level network driver (NDIS2) for the PXI815xb Ethernet controller. This driver does not appear to be on the driver disk or hard drive of the PXI chassis.

The file is attached below. Just unzip it to a floppy disk. You will need to modify the settings for your particular network.
Trey Hamilton
Applications Engineer
National Instruments
http://www.ni.com/support
Attachments:
dosenet.zip ‏671 KB

K9A2 *V1* Bios 1.8 - No drivers for Promise RAID controller.

Does anyone know which set of Promise Raid drivers work with the updated Promise firmware that is part of the 1.8 bios update?
Version 1.2 of the bios includes Promise version 28.1030.0021 which works with at least 1.1.1030.27 of the promise drivers.
Version 1.8 of the bios includes Promise version 28.1030.0032 for which I cannot find any working drivers; do they exist? (Vista cannot see the controller and is unable to locate a suitable driver. Trying to use existing promise driver fails since it will not recognise the device)
Just had a brainwave. On the MSI site, there is an updated driver pack for the Promise controller (this is a V1 board); this version is
Vista32/64 Ver.: 1.1.1030.47
Is this the version that is compatible with v1.8 of the bios (and hence 28.1030.0032)?

Give them a try, they if they work will show soon enough.

Missing Drivers for USB Controllers (2), SM Bus Controller, and PCI Device

Just got this laptop from my grandparents, and they whiped the OS off if it and did a reinstall with windows 7 64 bit. When it reinstalled it was missing many of the drives, most of which I've been able to find, but I still have four left that I can't find anywhere. Device: Hardware ID PC Device: PCI\VEN_10EC&DEV_5209&SUBSYS_1805103C&REV_01
PCI\VEN_10EC&DEV_5209&SUBSYS_1805103C
PCI\VEN_10EC&DEV_5209&CC_FF0000
PCI\VEN_10EC&DEV_5209&CC_FF00 SM Bus Controller: PCI\VEN_1022&DEV_780B&SUBSYS_358B103C&REV_13
PCI\VEN_1022&DEV_780B&SUBSYS_358B103C
PCI\VEN_1022&DEV_780B&CC_0C0500
PCI\VEN_1022&DEV_780B&CC_0C05 Universal Serial Bus (USB) Controller: PCI\VEN_1022&DEV_7812&SUBSYS_358B103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_358B103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03 Universal Serial Bus (USB) Controller: PCI\VEN_1022&DEV_7812&SUBSYS_358B103C&REV_03
PCI\VEN_1022&DEV_7812&SUBSYS_358B103C
PCI\VEN_1022&DEV_7812&CC_0C0330
PCI\VEN_1022&DEV_7812&CC_0C03 I have tried uninstalling the devices and rebooting the laptop, and updating the drivers using this site (suggested for someone else having the same issue) http://support.amd.com/en-us/download. When I looked on hp's site there is no driver that I saw for any of these.

Are you using drivers from your Support page? The AMD graphics driver usually has sm bus and usb drivers. The PCI device is Realtek Card Reader, also in the list. You can also order Recovery Media which reinstalls Windows and all drivers & software. http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-dv6-6c00-Entertainment-Notebook-PC-series/5191856/model/5210864#Z7_3054ICK0KGTE30AQO5O3KA30R1 Too bad your grandparents didn't use HP Recovery Manager installed on the laptop to reinstall Windows. That would have prevented this.

G62 can't find drivers for USB mouse

For some reason I can't get my wired mouse OP-35D to work with Windows 7. When I plug it in ti the USBslot the PC can identify that its a USB mouse but can't find any drivers. I've downloded drivers from the manufacturers homepage but it's still not working. Tried four different USB mouse both wired and wireless, same result. USB-memorysticks, USB-harddrives are working fine.
Solution anyone?

Open Device manager and Expand USB Controllers, right click on everything labeled as device or hub and select uninstall, do this one at a time. Once this is done restart the notebook.
Do Not uninstall anything labeled Controller.

How to use Labview drivers for USB-CAN Adapter

Hi,
I just recently started working with CAN and I have a PCAN-USB adapter. I'm trying to create a programme for monitoring a series of CAN based devices and I've found Labview drivers at the link below. However, I'm not really sure how to start. I have the specs for the device but I don't know how to proceed.
Should I create messages and channels and a data base in MAX first? If anyone has programmed with this dongle before please give me a guide how you went about it.
Labview drivers - http://www.labviewportal.eu/en/device-i-o/82-pcan-usb-driver.
Thanks

I have not used this specific CAN adapter, but I have used other CAN adapters from both NI and other companies. The CAN database in MAX is useful only if you are using an NI CAN device. For all other CAN devices you need to use the format that the library uses; most likely that will be raw CAN frames.
If you do want to use the NI-CAN interface on top of the PCAN library, you can use NI-CAN virtual channels 255 and 256. These are internally connected, so that anything you send on one is received on the other. This makes it possible to do translation between raw frames and channels defined in a database, by opening one interface for frames and the other for channels. You read raw frames from the real device and send them to CAN255, then read them on CAN256; for writing, you do the opposite. However, this still requires understanding how to read and write raw frames on the underlying device, so I'd start there.

[Z580] New drivers for USB 3.0

Hi,
I would like to ask when drivers USB 3.0 for Windows 8.1 will be available?
Best regards.

Just upgraded g500s (intel chipset) from win8 to 8.1. USB3.0 did not work after upgrade, however, deleting the devices (extensible and root hubs) followed by searching for new devices installed the new 8.1 drivers and all is well now.

LabView drivers for USB to DMX512 hardware

Anyone find any hardware (USB to DMX512) that is supported by LabView (i.e. LabView drivers)?

I'm
not aware of any DMX-512 interfaces that come with a LabVIEW API.
However, most of those interfaces come as PCI cards or as
serial-to-DMX512 converters.
In the first case, there is always a
DLL to communicate with the PCI card and you can use LabVIEW's Call
Library Node to call that DLL from your LabVIEW code.
Quite a few
DMX-512 converters are connected through RS232 (or RS485) and LabVIEW
as built-in support for the serial port. This seems to be the easiest
approach. Here is a link to a Discussion forum which discusses this:
http://forums.ni.com/ni/board/message?board.id=140&message.id=2052&requireLogin=False
Regards,
John E.
Applications Engineering
National Instruments

Standalone drivers for USB 6008

Hello, all.
So here's my problem: I am running an experiment that must be on
a Windows 98 machine for various reasons, and I want to take some
additional data using a USB 6008 device. I know that NI-DAQmxBase isn't
supported on Win98, but I don't think I should need the full system, as
I've already written a portable C executable on an XP machine, and can
modify it over there if need be. However, the USB 6008 can't
locate the necessary drivers to install on a machine if DAQmxBase isn't
installed first. My question is whether there is some way to
install the USB 6008 without having the full DAQmxBase installation
present, i.e. if there is some sort of standalone driver somewhere that
I could download, or perhaps a way to do things using VISA or some
other lower level interface (though I would hate to have to resort to
that.) Any help will be much appreciated!

HEPatUTstudent,
Unfortunately there is no way to use the 6008 with Windows 98.
Even on a supported OS you still either have to use DAQmxBase or the
full DAQmx driver -- there isn't a stand alone driver for specific
devices.
The 6008/9 were recently added to the full version of the NI-DAQmx
driver in version 7.5, so if you can move to at least Windows 2000 you
would be able to program the 6008 in the same API as every other NI DAQ
device that is supported by DAQmx.
Hope this helps!
Regards
Doug Mumford
Applications Engineer
National Instruments
Doug M
Applications Engineer
National Instruments
For those unfamiliar with NBC's The Office, my icon is NOT a picture of me

Drivers for USB, Ethernet Controller, etc

Similar Messages

Maybe you are looking for