Drivers for Xenserver on TS130 Software/Onboard RAID
Inspired by the Intel Hybrid Cloud raid controller I ordered a TS130 w/16GB RAM and a couple enterprise 1TB drives, along with the Xeon cpu.
I configured the 2 1TB drives in a RAID 1 mirror and booted from Xen, but currently it sees the drives individually. Either Intel/Citrix/Lenovo has worked out a driver for this, or in their configuration they are using a sync or (gasp) no raid at all?!?!?!
Intel Hybrid Cloud - Lenovo System Options and Specs Here
Any advice? Really bummed out...
software raid on xenserver is not officially supported, but there is an unofficial guide to try to get it to work, but just a warning, it sounds like a bitch
http://blog.codeaddict.org/?p=5
Similar Messages
-
When I attempt to log on to I tunes I get the following message:
"The registry settings used by the I Tunes drivers for importing and burning CDs and DVDs are missing.
This can happen as a result of installing other CD burning software. Please re-install I Tunes."
To my knowledge no new software has been installed. I have tried un-installing and re-installing I Tunes but I still
get the same message.
Can anyone offer any suggestions? Do I need to download a new driver?
Bill MartinI can get down as far as step 11 but it shows nothing about upper filters and when I type on "If the Upper Filters entry is missing follow these instructions" nothing happens
Do you mean you can't see the instructions on what to do if there is no UpperFilters entry?
If so, here's the relevant instructions for that step:
On the right side of the Registry Editor window, right-click the UpperFilters entry and choose Modify from the shortcut menu.
Right-click the empty white space within the right-hand portion of the Registry Editor window. From the shortcut menu, choose New > Multi-String Value.
Name this new value "UpperFilters" (without the quotes). Then, right-click the newly created UpperFilters entry and choose Modify from the shortcut menu. -
I have a xerox phaser printer which I want to connect to my mac book but each time it says there is no software to support the version of lion I have!
I have downloaded the software for the 10.7 but that hasnt helped... any ideas?? thanksYou will have to try the xerox website for the latest drivers for Mac OX system you are using
http://www.support.xerox.com/support/engb.html
It may be that your printer is not supported. You do not specify which model you have so unable to help further. -
when i start up i tunes i get the message,"The registry settings used by the i Tunes drivers for importing and burning CD's and DVD's are missing. This can happen as a result of installing other CD burning software. Please reinstall i Tunes." I tried reinstalling and still get the same message. when I ran the i Tunes diagnostics is says that the high and low filters are missing.
when i was having trouble with my optical drive(before Dell sent me a new one) the dell tech support representative had me delete some reg. files to try to fix the problem. I was told this would not affect the new drive when i install it or any of my existing programs. here is what he had me do....
Agent (CLKsmb_RyanJose_224427): "Click on Start
Click on Run
Type in REGEDIT
Click on OK
Click on the plus sign next to HKEY_LOCAL_MACHINE
Click on the plus sign next to SYSTEM
Click on the plus sign next to CurrentControlSet
Click on the plus sign next to Control"
Click on the plus sign next to Class
Click on the plus sign next to {4D36E965-E325-11CE-BFC1-08002BE10318}
On the right pane, click to highlight Upperfilters
Right click on Upperfilters
Click on Delete
Click on OK
On the right pane, click t
o highlight Lowerfilters
Right click on Lowerfilters
Click on Delete
Click on OK
Right click on Silent Install
Click on Delete
Click on OK
Close the Registry Editor
Reboot the computer
how can i get this message box to stop poping up every time i open i tunes? otherwise i tunes works fine. it still rips cd's. I just keep getting this message even after reinstalling i tines.
thanks,
chrisRefer to this article to fix:
iTunes for Windows: "Registry settings" warning when opening iTunes
http://support.apple.com/kb/TS3299 -
When starting iTunes I continually get an error message " The registry Settings used by the iTunes drivers for importing and burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes." I have unistalled and reinstalled iTunes several times and have cleaned up the registry using a 3rd party Windows utility. Any tips on removing this error message for good?
I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
hi, recently i bought macbook pro with retina display and installed windows 8 professional original software also. but in windows 8 track pad/ TOUCHPAD is not working properly. can you help me with providing drivers for trackpad to work on windows 8 professional .
Did you download and install the Windows Support software? If you did, did you use the Boot Camp Control icon to set up the trackpad how you want it?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp -
Software and drivers for media smart server EX 475 win 8.1
Had to replace my laptop and is now running win 8.1 (64 bit). I need software and drivers for my mediasmart server EX 475 (GG 795 AA)
I'd say go with Middleton BIOS either way (SATA II). In which case, get a newfangled 802.11ac card while you're at it.
-
in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986 -
When opening iTunes, I get the following error message: "The registry setting used by the iTunes drivers for importing an burning CDs and DVDs are missing. This can happen as a result of installing other CD burning software. Please reinstall iTunes."
I have reinstalled iTunes twice and still get the message.
Any clues??
Thank you.I'd start with the following document, with one modification. At step 12 after typing GEARAspiWDM press the Enter/Return key once prior to clicking OK. (Pressing Return adds a carriage return in the field and is important.)
iTunes for Windows: "Registry settings" warning when opening iTunes -
When I click on itunes, I get a message that says, "the registry settings used by the itune drivers for importing and burning cds and dvds are missing. this can result from installing other cd burning software. Reinstall itunes." I am a really inexperienced computer user. My computer is a windows 7. Would someone please walk me through this or tell me where to find information on how to do this. Thanking in advance, Laurie
Check out this Apple article -> iTunes for Windows: "Registry settings" warning when opening iTunes
The article will walk you through reinstalling iTunes and then checking for or creating device filters. Did it help? Did you run into any problems? -
Radeon HD 7970 Graphics Drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion
Need graphics drivers and Catalyst 12.11 Software for OS X 10.8.2 Mountain Lion (to support Radeon HD 7970 Graphics cards)
Operating System
-64-bit, OS X 10.8.2
Graphics Cards (all twelve)
XFX Double D Radeon HD 7970 (FX797ATDFC)
XFX Double D Radeon HD 7970 Black Edition (FX797ATDBC)
XFX Double D Radeon HD 7970 GHz Edition (FX797GTDFC) **
Diamond Radeon HD 7970 (7970PE53G)
Diamond Radeon HD 7970 GHz Edition (7970PE53GHZ) **
Diamond Radeon HD 7970 Double Black Diamond Edition (7970PE53GDD)
ASUS Radeon HD 7970 (HD7970-DC2-3GD5)
ASUS Radeon HD 7970 GHz Edition (MATRIX-HD7970-P-3GD5)
SAPPHIRE Vapor-X Radeon HD 7970 GHz Edition (100351VXSR)
SAPPHIRE Radeon HD 7970 (100351SR)
GIGABYTE Radeon HD 7970 (GV-R797OC-3GD)
MSI Radeon HD 7970 (R7970)
Please also add graphics and hardware acceleration for H.264/H.265, and OpenCLLove these year old threads.
Flashing is what some other sites specialize in, or even troubleshooting non-Apple cards.
There is an AMD Mac Edition 7950. Now. As well as EVGA GTX 680.
All of those were tested and reported on by Barefeats - back in March-May 2013.
Apple? not interested in PC cards other than they have quietly added more driver support in 10.8.3 and especially above. Not in 10.8.2.
Be interesting to see what Maverick support provides as far as GPUs.
And netkas and others are up on PC graphic cards, not Apple, even if they don't write drivers, they do often write how to flash a PC card and support. Apple and this discussion, no. -
Software and Drivers for an HP Scanjet 5590 with a 64 bit Windows 7 computer.
I thought that I had posted the following question but as I can't find it I will try again. I have been given a HP Scanjet 5590 scanner with no Software or Drivers for 64 bit Windows 7 computer and looking through the Web I saw some awful comments on the experiences of those using the software and drivers. I don’t want to make the same mistake so could anyone tell me how to go about obtain the correct software and drivers?
Corporal,
Here is the link for the software...
If you have the "p" model, backtrack a the link and reselect the proper model.
You want the "Full Feature" software.
Note that the download size is 315MB - plan accordingly if you have a slow connection...
While you are there, be sure to download the Print Doctor utiltity. (Do that first, it is tiny.) This may help later with installation and connection issues, if needed.)
HP Scanjet 5590 Digital Flatbed Scanner series - Software and Drivers
I hope this helps...
Click the White Kudos Star on the Left to give Kudos for the help.
Please Click “Accept as Solution” to say issue is solved.
Always Include: (Computer) Product Number , Printer – Model Number ,
Never give out your Serial Number
2012 Year of the Dragon!
Kind Regards,
Dragon-Fur -
Can you use Windows 7 Support software (drivers) for Windows XP on bootcamp?
I'm just wondering, I'm installing windows XP on my mac running lion. I don't have my lion install disk but Im able to install 'windows 7 support software' from bootcamp which I put on a usb flash drive. My friend says I can use that for Windows XP drivers but i'd just like to ask here.
So basically, can I use windows 7 mac drivers for windows XP? If not is there anywhere I can download them?
THANKShttp://support.apple.com/kb/HT5634
-
Where do I download drivers for airport extreme.....my iPad can not be set up by he current software
where do I download drivers for airport extreme.....my iPad can not be set up by he current software
I have an airport extreme with updated software(latest) and I setup an Ipad 3 on it with ios6(wirelessly). You can access the airport to update it with the utitlity app on an ios device, mac, or pc. I dont think it has anything to do with the airport software. Did you try rebooting the airport, then trying again?
Like james said, maybe more detail would help someone help you. -
I have the latest operating system, but can't get my printers added. Why does the software update say that drivers for my printers are not available? I have the drivers installed from the CD but can't add the printer because it wants to go through software update.
It's pretty difficult to offer suggestions when you say nothing about your Mac, the version of Mac OS it's running, or the models of printers you have. This forum, however, is intended for questions about old, pre-G3 hardware, so unless you are asking about an very old Mac, this is not the forum where you'll be most likely to get help with your problem. I'd suggest you ask this question in the forum for your model of Mac or version of Mac OS X it's running. You'll be more likely to get assistance there, assuming you provide sufficient detail for anyone to make a diagnosis of the problem.
Regards.
Maybe you are looking for
-
I created this Polygon class. I've already tested it and it works just like java.awt.Polygon. This class supports floating point coordinates. It does not extend Polygon in java.awt. Enjoy import java.awt.*; import java.awt.geom.*; * This is a polygon
-
i'm trying to connect my MacBook Air to a second monitor... I am using the VGA Thunderbolt adapter. It won't flip to the second screen... any suggestions?
-
BI Integrated Planning Disaggregation
Dear experts In the process of replacing our KEPM planning tool in the ERP system by an input ready query in our BW I've encountered a problem that I cannot solve properly. The query structure is as follows (extract): The "FC 12m Total" and the "FC 1
-
I am using the 1.3.1 trial version. My images are stored on a network drive. Whenever I save the metadata to file on a JPG image, I get the error "Writing XMP data did not complete successfully". Also, after getting this error, there is a duplicate f
-
Every time I attempt to open Quick Time I get a message that states it cannot find File Pthreadvc2.dll It suggests reinstalling the software. I have attempted that several time with no success. Does anyone know how to solve this?