Drivers imac 2011 and lion DVD

Hey.
For my mistake I erase all my HD at my mac and i have no OS at the moment. Now i will install windows 7 but i need the drivers because i dont have MAC OS to download the drivers from bootcamp, where i can download the drivers?
And how i can install mountain lion OSX for my mac? I dont have DVD installer :|
THanks and sorry for my english

Try to use ctrl+shift+eject button combination to awake display. See this: iMac 27" Black Screen?
Try to boot from USB or Apple install disc. See if it works.

Similar Messages

IMac Retina 5K (2015) with 1xTDM iMac (2011) and 1x Dell External Display possible?

I have 1 x 27" iMac Retina 5K (2015), 1 x 27 " iMac (mid 2011) and a Dell P2715Q. I'd like to know if it's possible to run the 2011 iMac in Target Display Mode and my Dell as a secondary display from my 2015 iMac? My desired configuration is the 2015 iMac running two external displays. The 2015 iMac has an AMD Radeon R9 M295X 4GB Gfx card and both iMacs are running Yosemite 10.10.1
I have verified that running the 2011 iMac only via TDM works. Also running the Dell as an external Display only works (either at 4K resolution or the same resolution as the external iMac (2560x1440) via SwitchResX). With the Dell running @ 2560x1440, trying to put the 2011 iMac into TDM, causes a slow grey screen, then some display artefacts when coming out of TDM. Going in and out again appears to refresh the screen. But it doesn't seem to work.
I was wondering if anyone else has a similar configuration working and if so what settings or configuration changes to make?
Thanks!

I stopped by the Apple Store yesterday, and they were nice enough to try the Screen Sharing solution with me.
Indeed, we were able to share the screen of a MacBook Pro and display it on the iMac Retina 5K over a Thunderbolt Bridge network. (should also work over WiFi)
As I expected, (based on the native resolutions) the MBP window maxed out at about 55-60% of the height and width of the 5K display.
I didn't try experimenting with lower resolutions on the 5K.
I'd actually be OK with that solution except as we increased the font sizes, (e.g. 48 pt) we noticed a *lot* of ghosting around the characters.
I will have to try it again at normal font sizes and decide if that is something I can work with all day long.
Otherwise, I am leaning towards buying last year's iMac, which kinda' grates me the wrong way.
Thanks,
n8

Problems with graphics and Internet connection - iMac 2011 with Lion

First: sorry about my english... It is terrible! lol
I have an 2011 iMac, purchased in June 2011 in the USA. I brought the iMac to Brazil.
Sometimes when I turn on my iMac, the graphics are horrible and can not connect to the Internet. When this happens, I have to restart the Lion.
Apple introduced the "iMac FW Graphic Update 3.0". The information says clearly that supports Brazilian Portuguese. Butwhen I install, an error appears: "this software is not compatible with your system".
My Lion is in Brazilian Portuguese. Why it is not compatible? How do I install it? How can I solve this problem?
Note: The technical assistance of Apple changed the HD, according to recall made by Apple through the site. The HD is new.
Thank you very much!

Anybody? I'm buying a new network card simply but I'm not sure that it is the network card that is causing the network problems I'm experiencing.
Regards
André

MS word 2011 and Lion 10.7.2

Dear All,
After updating to Lion 10.7.2, I have encountered this error message when trying to save files in MS Word to my own hard drive. This happens after a couple of minutes use.
'You cannot save while the file is in use by another process. Try saving the file with a new name. (xxxxxx.docx)'
This makes MS Word very dangerous to use, as the autosave sometimes fails. Any ideas or hints, or will I need to downgrade to 10.7 and wait until Apple or MS offers a solution?
Many thanks.

Same problem here. All software up to date. I have an extra issue in that word 2011 completely crashes my finder as well on occaision, to the point where only a full restart will fix it. I saw an answer to the first problem in a microsoft PC forum that says it's a known problem and to turn off auto save. That is not an option for me! If only pages did cross refernces and captions I could get rid of word!

IMac 2011 and Windows XP. Everything works fine. Little problem there.

Everything works fine.
There is one small problem. The sound is not connected to external speakers.
The sound remains on the built-in speakers.
Here we can see, SPDIF shines red light.
Does anyone solved this problem?

All drivers and devices were installed correctly
Sorry, I write this from iPad, it works not very good.

Output jack Imac 2011 and Yosemite

Hello everyone, my problem is when try use my headphones razor in my imac this not working, continued listening the sound in the speakers of the computer, and i need to know if this is problem of the OS Yosemite? Thanks

It does take a bit of time. The progress bar replaced the spinning gear thing. Booting on my MacBook Pro (SSD drive) takes 15-20 seconds.
Barry

We have an iMac 2011 and can not get reader to work and even view our tax forms we are working on 2290

help

Hi bpughtify,
What version of Adobe Reader are you using?
Were the forms working earlier?
Are you able to view other pdfs?
Do the forms work fine with Mac's inbuilt pdf Preview application?
Regards,
Rave

IMac 2011 getting BSOD in Bootcamp

Hello all.
I installed Bootcamp on my new iMac (2011) and installed Windows 7 SP1. I downloaded the iMac drivers to a CD via Bootcamp, and installed this.
When I run Dawn of War 2 in Windows, I get the dreaded blue screen error with a "atikmpag.sys" error.
Now, I get that this has something to do with the Apple-drivers and the ATI-graphics, but what can I do about it?
I tried installing the ATI drivers from their web-site, but it says that my card is not supported.
How do I replace the Apple-drivers in Windows 7 with, say, ATI's own driver?
Thanks in advance.

It is an ATI driver, this is the info from Display Adapters under Device Manager:
Driver Provider: ATI Technologies Inc.
Driver Date: 07-07-2011
Driver Version: 8.872.0.0
Digital Signer: Microsoft Windows Hardware Compatibility Publisher
However, I did not download it from the ATI site. If I go to the ATI site and download the driver from there (after entering my hardware and OS info) it wont install. Says I don't have the proper hardware.
Instead, I downloaded the driver from here: http://www.hardwareheaven.com/mobility-radeon-drivers-support/206549-ati-mobilit y-catalyst-11-7-display-drivers-notebooks-27-07-2011-a.html
However, the issue is BACK! I played through several (10+) levels in DoW2 without any issues and exceptional performance, but then the game started freezing for several seconds, the screen turned either black or gray, and then the game went on - but just had a blue screen again.
Sorting the driver was my last idea, I am fresh out now.

Should I buy a new MBPr 15 or stay on iMac 2011?

The thing is, that I am not really sure, should I buy this machine or not, because actually I am a film-maker and currently I have an iMac (2011), and looks like I will work in the field in the future. So I am considering of buying a base MacBook Pro Retina 15, which is with i7 2.7GHz, 16GB of memory, 512 flash storage + Intel HD Graphics 4000 and NVIDIA GeForce GT 650M with 1GB of GDDR5.
And here is my iMac tech specs: i7 3.4GHz, 8GB of memory, 1TB 7200rpm hard drive + AMD Radeon HD 6970M with 1024Mb.
Also, I am going do a lot of pretty heavy video-editing (Premiere, After Effects) on the notebook, because I am going to sell my iMac. Well, if buying the Macbook makes sense.
So the question is, will it make a big difference in speed of rendrering, overall quality of work progress, and editing itself. Also, I am interested in Photoshop, if you, guys, worked in photoshop (photographers or web-designers) on this machine please leave a reply about how it goes there, I mean, is there any lags or retina-display problems, because I am also planning to work in all of Adobe Software.
Also, sorry for my english, this is not my native language, and sorry if this topic is not in the right place. Peace!

You will find that the relative performance of the two units will be very similar. see the attached bench test scores:
http://browser.primatelabs.com/mac-benchmarks
Note that with the retina, your storage will be significantly less. Whether the resolution of the retina is worth the premium you have to decide.
Though I an not an Adobe user, I would think that the retina with SSD as well as 16 GB RAM should handle those applications without any difficulty.
Ciao.

Issues with 'stuck' keys on new iMac (2011) with Aluminium KB

Hi All,
I've got a weird issue which I've seen on a few other forums... with no real fix. I've got a new 27" iMac (2011) and I have been using it happily for a few weeks. In the last two days, my keyboard has been going a little crazy.
Firstly I thought it funny that the 'option' key wouldn't work during bootup and later I discovered that once booted in OSX, i'd have 'sticky' keys or keys not registering when pressed.
When I reset the keyboard, everything works fine again.
Its becoming a problem as I cannot register an of the bootup options anymore and have reverted to using an old Remote to access my boot volume screen (holding the Menu button).
Has anyone seen this before and if so, what is the fix other than taking the keyboard back to the Mac store?
Thanks again,
Con

Hi Cabakroll,
Yeah, I've been doing regular updates (when available). I have actually figured out the issue... its a very weird fix mind you. I went back to see what changed the other day, when I first notice the issue. I recalled that I swapped out the batteries (the ones that came with it were running low for some reason), with rechargables.
Since then, the keyboard has been going crazy. I swapped the rechargables with normal batteries and bingo, problem fixed. :S
Thanks for getting back to me though.
Hopefully this helps others too.

IMac 27" (late 2011), Mountain Lion, Bootcamp, and OSX partition disappearing and refusing to mount

Hey all,
I'm putting this as a question in the discussion forms for bootcamp as I'm not sure where else to put it, but I resolved an issue I was having and having spent all of yesterday and the day before reading through this community and some others looking for answers and mostly seeing "hope you have backups, time to format!" (which to me is not always the best answer), I thought I would put it here for search purposes (with all the key words I had to use) in case anyone else has a similar issue.
My scenario was this:
2011 27" iMac with Mountain Lion installed and Windows 7 installed on a boot camp partition.
1) Haven't been in windows in a while, wanted to play some windows only steam games. Load windows 7. All is well. Have fun. Time to reboot into osx.
2) Reboot using bootcamp toolbar icon.
3) Wander away from computer. Come back to find windows 7 has loaded again. "That's weird", I think. Reboot again, this time hold down option key to select boot device.
4) Discover the only options are the Bootcamp partition and the Recovery partition. OSX "Macintosh HD" partition has disappeared. Huh.
5) Load recovery partition and load disk utility.
6) Review disk utility to discover the Macintosh HD partition shows up in the list, but won't mount. Run verify and repair tools. Errors are as follows: Invalid node structure, invalid key length, invalid record count, etc etc. Running a repair fails - disk utility advises me to back up and erase the drive and that the partition is unrepairable. No offense disk utility, but I think I'll try a few more options first.
7) Purchase DiskWarrior on advice of multiple posters in other threads and general online consensus of it being capable of fixing these sorts of errors. Go through process of loading bootable dvd.
8) Diskwarrior cannot see the Macintosh HD partition. This is bad. Review more threads. Advice is that if diskwarrior can't fix it, hope you have backups and wipe the drive. Likely to be hardware failure. I'm skeptical of hardware failure, because windows is chugging along running fine if I boot into it, and I ran a scan of the windows partition and it came back clean. SMART status is also showing the drive is ok. However, running out of options and starting to lose hope.
9) Follow advice in this support topic: http://support.apple.com/kb/ts1417?viewlocale=de_de Both safe mode and disk utility aren't options (safe mode won't work without it seeing the partition) so sounds like fsck is the final option.
10) Start up in Single User Mode (http://support.apple.com/kb/HT1492). Run fsck per instructions. It reports back ok.
11) Realize fsck is checking the recovery partition, and not my damaged OSX partition. Realize I don't know anything about unix commands and have no idea how to tell fsck to check a different partition.
12) Learn that I need to find out what the drive id is for the damaged partition. Reboot, load up disk utility, select greyed out "macintosh HD" partition, click info. Write down the id: disk0s2 (likely to be the default for you as well if you have one drive in your imac and a default bootcamp install).
13) Go back into single user mode and type the following (without quotes): "fsck_hfs -fy /dev/disk0s2"
14) (Forgot to copy down exactly what it said at this point, but gist of it was that the drive had errors and isnt repairable). Feel like ****, thinking this is unlikely to resolve itself nicely.
15) With nothing to lose, try to force fsck to rebuild the catalog - "fsck_hfs -rc -d /dev/disk0s2" I found this syntax on some forums and can't find the thread again. I have no idea what the -rc and -d do that -fy don't, but if someone can let me know, that'd be cool. Either way, this resulted in something actually happening. Tells me it is "rebuilding catalogue b-tree". Still, finishes with a bunch of errors about improperly linked files, more node errors, etc etc.
16) Retry "fsck_hfs -fy /dev/disk0s2". It seems to be doing stuff now, even though there are lots of errors. Continue to re-run fsck using this syntax. Probably ran it 10-15 times. Takes over an hour. Finally, minimal errors being reported.
17) Realize that perhaps I should try Diskwarrior again now, since I've managed to do soemthing to the partition with fsck.
18) Run Diskwarrior from bootable DVD. Success! It now sees the damaged partition. Reports that it has a bunch of damaged crtitical files, and needs to be repaired, but hey, at least it can see it.
19) Let Diskwarrior do its thing, and reboot.
20) Boot from repaired OSX partition. Rejoice. Immediately plug back in the timemachine drive you foolishly unplugged to take away over the holidays and neglected to plug back in before you had commenced work on stuff you didnt want to lose through formatting, which is why you are so desperate to recover files rather than wiping and restoring from time machine backups and avoiding this whole mess.
TL;DR - If Disk Utility and DriveWarrior fail you, try running fsck (using different syntax that apple recommends) as many times as it takes to get the partition to a stage where diskwarrior can see it. All advice I saw for similar questions was to erase, reinstall OSX, and restore from time machine backup. For those of you who are foolish like me and had files that werent time machine'd, or those who operate without, maybe try this.
Hope this helps!

What -rc & -d do.
From: The fsck_hfs manual page.
https://developer.apple.com/library/mac/#documentation/Darwin/Reference/ManPages /man8/fsck_hfs.8.html
-d      Display debugging information. This option may provide useful information when fsck_hfs cannot repair a damaged file system.
-r      Rebuild the catalog btree. This is synonymous with -Rc.
-R flags Rebuilds the requested btree. The following flags are supported:
                         a       Attribute btree
                         c       Catalog btree
                         e       Extents overflow btree
I had the same problem as you but unfortunately "fsck_hfs -rc -d /dev/disk0s2" is failing saying: "The volume   could not be verified completely." I believe it's supposed to be telling me the partition's name (normally "Macintosh HD") between 'volume' and 'could' because there's 3 spaces in between the words.
"fsck_hfs -fy /dev/disk0s2" is failing with the same error.
I tried "fsck_hfs -r -d /dev/disk0s2" since the c appears redundant with a lowercase R. and it again says it cannot be verified completely and adds "volume check failed with error 7". Which unfortunately is not documented on the fsck_hfs man page!
Unfortunately for me, Diskwarrior still can't see my busted Mac OS partition.

I am using a new imac with osx lion 10.7.5 and have bought a copy of Apple iLife 11 on dvd a so that I can install iWeb and idvd, when I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate

I am using a new imac with osx lion 10.7.5 and have just bought Apple iLife 11 on dvd so that I can install iWeb and iDVD, as macs no longer ship with these apps. When I click on install iLife I get a message saying "iLife.kpg was signed with an invalid certificate.
Next problem is that when moving through the installer and get to custom install, as I only want to install iDVD and iWeb, I am presented with the option to install iDVD, Sounds & Jingles and iWeb, but not sure what is going on with the other 3 options iLife Support etc, they seem to be greyed out but still look like they may install over the top of the newer versions already on my imac. Is it ok for me to just go ahead and hit install? Or do I have a problem?

Yep, just install iDVD (plus sounds and jingles) and iWeb if you want it (but note that iWeb apparently won't work if you upgrade to Mountain Lion).
Then use Software Update to get any late iDVD updates.

How to install latest ATI drivers for iMac 2011 with BootCamp and Windows 7?

Hi,
i want to install the latest ATI / AMD drivers for my brand new iMac 2011 6970M 2GB under windows 7 to play GAMES (<- one of the reasons to buy a new mac)
What I tried:
1.: Update with latest mobilty driver vom amd. -> doesn't work.
2.: Uninstall all amd software (driver sweeper)
Install the latest drivers... -> doesn't work.
What should i do? Buy a PC?
thx

I installed other driver and it works fine for me. :
http://www.hardwareheaven.com/mobility-radeon-drivers-support/206549-ati-mobilit y-catalyst-11-6-display-drivers-notebooks-15-06-2011-a.html
ATI 11.6 Catalyst drivers...
Thx for help.

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers?

I have a Lexmark X1185, but I do not have the driver CD that came along with it. I have a 15" MacBook Pro (Late 2011) and I cannot seem to find drivers for OSX Lion.. Where can I find the drivers? Thank you for the help!

Have you looked on Lexmark's support site?
http://support.lexmark.com/index?page=content&id=OS23&locale=en&userlocale=EN_US

When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned mo

When using Final Cut Pro X (iMac mid 2011 model-version 10.1.3) to burn 1 hour movie onto DVD, it seems to render but when computer says 'Sharing to DVD successful' and yet DVD is blank, what's my next move? Burning hardware is working as I burned a project using iMovie afterwards. I filmed a funeral service and family get together afterwards but can't share it with family and friends...plz......suggestions/recommendations/condemnations........

Another update to my burning problem...in my movies folder there is an img file (states it is a classic disk image-2.82GB) after I have tried burning a DVD unsuccessfully and when I open the img file I see 1) AUDIO_TS AND 2) VIDEO_TS files. I 'control' clicked the file and tried burning this folder onto a disc. Result it seemed to burn both files onto DVD but still couldn't view video.

Drivers imac 2011 and lion DVD

Similar Messages

Maybe you are looking for