Drivers needed for USB ports Multifuntion DEVICE ERRORS WONT UPDATE

roduct Name: HP Pavilion dv6-2115sa
Operating System: Microsoft Windows 7 Home Edition (64-bit)
None of my 3 USB ports work on HP Pavilion dv6-2115sa
Searched automatically for update but windows could not find software for your device ......anyone had a similar problem?
In device manager they are listed as Other devices
Multifunction device x 4
Any help would be greatly appreciated.

Hi,
Please try:
    http://support.amd.com/en-us/download/chipset?os=Windows%207
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • Windows 8 Clean Install drivers question for USB, CD, and Wifi

    Hello,
    I did a clean install using bootcamp for Windows 8. The problem I am experiencing is that I cannot download the needed drivers through bootcamp due to a slow connection. (I am in Afghanistan for work). Does anyone know where I can get the drivers so my USB ports, Cd-ROM drive, and Wifi will work from an external website where I can use a download manager? I have a 15' Macbook Pro-Mid-2012.
    Thank you,
    Ryan

    Welcome to Apple Support Communities
    You can download the Windows support software from the Apple site > http://support.apple.com/kb/DL1638?viewlocale=en_US&locale=en_US Follow the steps of the website to install it on Windows

  • Ex-80gb PS3 hdd - in enclosure.. need two usb ports?

    Have got a 'Omata Mobile HD' enclosure.
    Have installed the 80gb formatted hitachi drive that was in my PS3 into it.
    PLugged it into powerbook usb port... disc utility doesnt recognise it... read instructions again from Omata, all in pigeon english - just talks about windows install etc.. .google search later reveals that it needs two usb ports - one for power, one for data - is this true? Does this go for all enclosures?
    i would need to then buy a usb extendor as the usb ports are on opposite sides of the pbg4.
    Are there any enclosures that can run a 80gb off one usb port? It also has DC 5V/1A on the enclosure are these quite common?

    Hi, Steve. Given the inconvenience of connecting a dual-USB "Y" cable to your Powerbook, the drawbacks of USB2 compared to FireWire for use with any Powerbook (USB is non-bootable on all PPC Macs and slower than FW 400, never mind FW 800), and the very low cost of your Omata enclosure, I recommend simply replacing it with a FW enclosure. Save the Omata one for use with your next Mac, which will be Intel-powered and USB-bootable, and won't have the limited USB bus power problem that afflicts all Powerbook G4s. Most bus-powered FW enclosures are bootable and have no trouble getting enough juice from Powerbooks, unlike nearly all USB2 enclosures. Get one that has the Oxford 911+ FW bridge chipset in it; that's far and away the most reliable bridge.
    Message was edited by: eww

  • My ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    my ipod 4th generation wont show up on itunes or my compute, but there is a file for USB mass storage device in my device management with a yellow triangle next to it. how do i get it to sync? HELP!!!

    Here:
    iOS: Device not recognized in iTunes for Windows
    I would start with
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
    or
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • How do I set up original windows 8 DVD on a Macbook air when my external drive needs both usb ports?

    got a brand new macbook air and want to set up an original Windows 8 DVD via bootcamp. Probleme: my external DVD needs 2 usb port connection so I want have a chance to plug in an usb drive at the same time.
    Any other choice to get along?

    ok I'll try this - why didn't I have this problem with my previous Macbook air - I cannot remember how I managed setting up an original Win 7 with exact.the same equipement. Has the bootcamp Software changed? I remember burning a cd with the Windows Driver.

  • HT1338 I have OS X 10.6.8 on my mac and have just downloaded 10.7.4 (needed for imovie 11) but it will not update.

    I have OS X 10.6.8 on my mac and have just downloaded 10.7.4 (needed for imovie 11) but it will not update. What has happened to the downloaded update?

    When you downloaded Lion from the Appstore (and paid 29$) you have 10.7.4.
    After the download you will find it in the Applications folder: that is the installer ! The installer vanishes when used, thus if you want to make an installer disk (to avoid a later redownload), you should do it before you run this installer. You can use "Lion Diskmaker" for that (use a 8GB USB stick), http://www.macupdate.com/app/mac/39701/lion-diskmaker/

  • Drivers needed for iPod to work?

    A couple of days ago, I received a free iPod Nano (2GB) from a promotional offer with my bank. There was no installation software disk included. From reading on the site, this is normal because everything you "need" is supposed to be in the latest version of iTunes.
    When I first plug my iPod into my computer, Windows recoginizes it as an iPod and prompts me to go through the new hardware installation. The installation then fails because no driver software is found/available for the iPod.
    I have the latest version of iTunes. ITunes will open and all my music is there and playable. My iPod just will not show. My iPod is fully charged. I have gone through all of the 5 R's multiple times including the 6th R, which is REALLY FRUSTRATED!!!
    Basically, I need a software driver so that Windows will recognize my iPod. I have read here that iTunes has them or something? However, iTunes will not recognize my iPod because it's simply just not there. Device Manager in Windows has the yellow exclamation point on the iPod.
    I have tried multiple USB ports. I have tried upgrading all of my Windows utilities up to date. I've never really had any problems with anything installing/connecting to my computer until now. I'm really starting to disbelieve all of the iPod hype and am getting extremely frustrated with it because it's not seeming very intuitive or user friendly.
    Any help getting Windows to recognize/install the software for the iPod will be extremely appreciated. I'm getting ready to eBay the thing because it's really becoming a headache. Maybe you could help me realize that iPods are where it's at and help me solve this dilema! Thanks!
    Don't know if this helps, but my computer specs are:
    Windows XP
    AMD Athlon(tm) XP 2500+ (1.83 GHz)
    1 GB RAM
    80 GB hard drive
    Self-built   Windows XP  

    Do you have Windows XP with Service Pack 2, or just Windows XP?
    I believe SP2 is a requirement, as it contains the needed USB drivers for Windows.

  • Drivers needed for hp pavilion 23-b012 windows 7 home 32 bit

    Hello Im running into a problem where i cant find no access to the internet in my device manager i have yellow marks on the following devices and need drivers for
    1. Ethernet Controller
    2. Network Controller
    3. PCI Device
    4. PCI Simple Communications Controller
    5. SM Bus Controller
    6. Some Unknown Device
    7. USB Mass Storage Device (Although it is reading the Flash Drive)
    This question was solved.
    View Solution.

    Hi:
    First install the amd chipset drivers and reboot.  You want the first file listed on the webpage.
    That will install the smbus and usb 3 controllers.
    http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2032
    Next install the graphics driver and reboot.
    http://support.amd.com/en-us/download/desktop?os=Windows%207%20-%2032#amd-catalyst-packages
    Next, install the audio driver and reboot.  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    Ethernet controller:  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
    Network controller:
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
    PCI Device:  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
    I would need you to post the hardware ID's for the rest of the devices (unknown & PCI Simple Comms) in order to try and find drivers for them.
    To find a hardware ID for a device, please do the following...
    Go to the device manager, find the Other Devices category, and click on the Device needing drivers.
    Then click on the Details tab at the top of the device window.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item on the list (Hardware ID's).
    Post the top string of characters that you see in the window.

  • Win7 64bit Drivers needed for pavilion touch laptop

    Hi 
    I have just bought a HP pavilion touchsmart 14-n056ea that came with windows 8. I am using it for work and they have given me a windows 7 pro 64bit OS to use instead as it works better with their systems. i have formatted the drive and installed the win7 OS now but the drivers online are only for windows 8. Can anyone please help me to source some windows 7 drivers. Below are the hardware id's for the ones that are popping up in yellow in the device manager.
    ethernet controller
    PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C&REV_08
    PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C
    PCI\VEN_10EC&DEV_8136&CC_020000
    PCI\VEN_10EC&DEV_8136&CC_0200
    network controller
    PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C&REV_01
    PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C
    PCI\VEN_10EC&DEV_8179&CC_028000
    PCI\VEN_10EC&DEV_8179&CC_0280
    pci communications controller
    PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C3A&CC_078000
    PCI\VEN_8086&DEV_9C3A&CC_0780
    sm bus controller
    PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C22&CC_0C0500
    PCI\VEN_8086&DEV_9C22&CC_0C05
    usb controller
    PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C31&CC_0C0330
    PCI\VEN_8086&DEV_9C31&CC_0C03
    unkown
    ACPI\HPQ6007
    *HPQ6007
    graphics controller
    PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C&REV_0B
    PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C
    PCI\VEN_8086&DEV_0A16&CC_030000
    PCI\VEN_8086&DEV_0A16&CC_0300
    i need a driver for audio too but windows is using its own one which seems to be working but would prefer the correct one.
    many thanks in advance guys.
    This question was solved.
    View Solution.

    Hi:
    You can use all of the W7 x64 drivers and software from this model, except the audio.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
    Audio:  Install third and reboot.  Accept the agreement, download and install the second driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    To save you time wondering what drivers you need for the ID's you posted, here they are...
    sm bus controller.  Install first and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...
    graphics controller:  Install second and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...
    ethernet controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
    network controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128935-1&cc=us&dlc=en&lc=en...
    pci communications controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127794-1&cc=us&dlc=en&lc=en...
    usb controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...
    unknown:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

  • Driver needed for Network controller,PCI Device,SM Bus controller

    Need helpt to get the drivers for win 7 64 bit for Network controller, PCI Device,SM Bus controller, Universal Serial Bus controller, PCI Encryption/Decryption controller

    Hi: For the smbus and usb 3 controllers, download and install the amd chipset drivers and reboot. http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 PCI device: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en&os=4063&product=7174407&sw_lang= PCI Encryption/Decryption controller: Download and run this driver.  Then you have to manually install it. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1 To manually install the driver, go to the device manager, click on the PCI E/D Controller needing the driver. Click on the driver tab.  Click on update driver.  Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install.   Then reboot. Network controller...need the hardware ID for that because I don't know what model wireless card your model has. Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category.  The network controller device will have a little ! mark next to it. So, find the network controller device, click on that and then click on the Details tab. Now you see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the third item (Hardware ID's). Post the top string of characters you see in the window.  

  • Drivers/firmware for ethernet port?

    I recently got rid of my PC (YAY!!!), meaning I no longer need my cheap crappy wireless router. However, when I hook my Ethernet cable up to the port in my PB, I can not connect to the web. I'd like to try reinstalling the necessary driver/firmware, as doing so recently solved my non-working USB ports problem, but I don't know where to find the driver... Can anybody post a link to a site where I can download a driver? Or perhaps have a better way to connect?
    (I understand that what I am looking for is probably under my nose, but I'm not computer savvy enough to know what terms to search for.... heh..)
    thanks

    Sorry, posted this one in the wrong department... I asked in the proper one (Networking, internet, etc...) Mods can delete this if so desire

  • Buying External Drive that Only Needs One USB Port?

    The optical drive on my 2007 MacBook Pro has been dead for about 6 months. I need to get an external one so I can install some software, but I am having trouble finding one that only uses one USB port, as there is only one on each side of my notebook. I went to Best Buy today, and the only one they had that is compatible with a Mac needs two side-by-side USB ports.
    Does anyone know of any good Mac compatible external drives that only require one USB port? I am interested in purchasing one by LaCie, but their site does not specify how many USBs it requires.
    Any advice you can give me will be greatly appreciated!

    Welcome to Apple Discussions!
    You might want to consider a FireWire powered optical drive:
    http://eshop.macsales.com/shop/firewire/optical-drives/
    A FireWire port will deliver more power, so you would only need to use one FW port. The people at OWC are very Mac knowledgeable and could help you to pick one out. Your 2007 MBP should have both FW400 and FW800, so you could use either port.
    Good luck!

  • Drivers needed for windows os upgrade?

    I'm updating my os from win98 to win2k.
    do i need new drivers for pci-7344, pci-6110e and ni-5411 (for pci). Labview version, i believe is 5.1, hardware and software purchased in summer 2001.
    Thanks,
    Byron Golden
    U of Houston
    Allied Geophysical Labs

    Hello.
    There are updated versions of the drivers you would need for those boards available on the web, but your LabVIEW version is very old and thus will not be compatible with those driver versions.
    Hopefully you have the CDs with your older driver versions on them. Many drivers are available on the web at:
    http://www.ni.com/downloads/
    You will need NI-Motion, NI-DAQ, and NI-FGEN for the 5411.
    Regards,
    Colin C.
    Applications Engineering
    Colin Christofferson
    Community Web Marketing
    Blog

  • Usb port not working after yosemite update please help

    ive got an early 2011 macbook pro i5. and one of my usb stopped working. if i reset my  computer it works for a while and then stops again. all these after yosemite update please i really need help on this.. and also when ever im in the middle of something it keeps crashing and saying these things below after i booting back up. ive tried several things, didnt work, tried repairing disk permissions. please anybody with any idea help me!
    Anonymous UUID: 
    CCC4DCA9-48E9-4692-250B-488588FCC69E
    Sun Nov  9 17:58:17 2014
    *** Panic Report ***
    panic(cpu 0 caller 0xffffff802a005eb2): "Possible memory corruption: pmap_pv_remove(0xffffff803b8db998,0x7fff7360f000,0x6d654, 0x6d654d64, 0xffffff8031663cc4, 0xfffffeb38ae0f078): null pv_list!"@/SourceCache/xnu/xnu-2782.1.97/osfmk/i386/pmap_internal.h:768
    Backtrace (CPU 0), Frame : Return Address
    0xffffff8031663b80 : 0xffffff8029f3a811
    0xffffff8031663c00 : 0xffffff802a005eb2
    0xffffff8031663cf0 : 0xffffff802a0065e5
    0xffffff8031663d50 : 0xffffff8029fb6b4a
    0xffffff8031663e60 : 0xffffff8029facd2c
    0xffffff8031663e90 : 0xffffff8029f5c747
    0xffffff8031663ed0 : 0xffffff802a3c45ff
    0xffffff8031663f40 : 0xffffff802a3c425c
    0xffffff8031663f50 : 0xffffff802a44dcb2
    0xffffff8031663fb0 : 0xffffff802a03ac46
    BSD process name corresponding to current thread: suhelperd
    Mac OS version:
    14A389
    Kernel version:
    Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
    Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
    Kernel slide:
    0x0000000029c00000
    Kernel text base: 0xffffff8029e00000
    __HIB  text base: 0xffffff8029d00000
    System model name: MacBookPro8,1 (Mac-94245B3640C91C81)
    System uptime in nanoseconds: 7052072843826
    last loaded kext at 6483411185500: com.huawei.driver.HuaweiDataCardActivateDriver    1.0.12 (addr 0xffffff7fac6ba000, size 16384)
    last unloaded kext at 6604174049015: com.apple.driver.AppleUSBCDC    4.2.2b5 (addr 0xffffff7fac717000, size 16384)
    loaded kexts:
    com.huawei.driver.cdc_ncm    2.7.2f16
    com.huawei.driver.dc_net    1.0.2
    com.huawei.driver.cdc_acm    2.6.2f17
    com.huawei.driver.cdc_usb_bus    1.0.3
    com.huawei.driver.HuaweiDataCardDriver    4.25.45
    com.apple.driver.AppleHWSensor    1.9.5d0
    com.apple.driver.AudioAUUC    1.70
    com.apple.driver.AGPM    100.14.37
    com.apple.filesystems.autofs    3.0
    com.apple.iokit.IOBluetoothSerialManager    4.3.0f10
    com.apple.driver.AppleOSXWatchdog    1
    com.apple.driver.AppleMikeyHIDDriver    124
    com.apple.driver.AppleHDA    266.5
    com.apple.driver.AppleMikeyDriver    266.5
    com.apple.driver.AppleSMCLMU    2.0.4d1
    com.apple.driver.ApplePolicyControl    3.7.21
    com.apple.driver.AppleLPC    1.7.3
    com.apple.driver.AppleUpstreamUserClient    3.6.1
    com.apple.iokit.IOUserEthernet    1.0.1
    com.apple.Dont_Steal_Mac_OS_X    7.0.0
    com.apple.driver.AppleHWAccess    1
    com.apple.driver.AppleHV    1
    com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
    com.apple.driver.AppleIntelHD3000Graphics    10.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB    10.0.0
    com.apple.driver.AppleBacklight    170.4.12
    com.apple.driver.AppleMCCSControl    1.2.10
    com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.3.0f10
    com.apple.driver.AppleSMCPDRC    1.0.0
    com.apple.driver.AppleThunderboltIP    2.0.2
    com.apple.driver.SMCMotionSensor    3.0.4d1
    com.apple.driver.AppleUSBTCButtons    240.2
    com.apple.driver.AppleUSBTCKeyboard    240.2
    com.apple.driver.AppleIRController    327.5
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
    com.apple.BootCache    35
    com.apple.iokit.SCSITaskUserClient    3.7.0
    com.apple.driver.XsanFilter    404
    com.apple.iokit.IOAHCIBlockStorage    2.6.5
    com.apple.driver.AppleUSBHub    705.4.1
    com.apple.iokit.AppleBCM5701Ethernet    10.1.2b3
    com.apple.driver.AppleFWOHCI    5.5.2
    com.apple.driver.AppleSDXC    1.6.5
    com.apple.driver.AirPort.Brcm4331    800.20.24
    com.apple.driver.AppleAHCIPort    3.0.7
    com.apple.driver.AppleUSBEHCI    705.4.14
    com.apple.driver.AppleSmartBatteryManager    161.0.0
    com.apple.driver.AppleRTC    2.0
    com.apple.driver.AppleACPIButtons    3.1
    com.apple.driver.AppleHPET    1.8
    com.apple.driver.AppleSMBIOS    2.1
    com.apple.driver.AppleACPIEC    3.1
    com.apple.driver.AppleAPIC    1.7
    com.apple.driver.AppleIntelCPUPowerManagementClient    218.0.0
    com.apple.nke.applicationfirewall    161
    com.apple.security.quarantine    3
    com.apple.security.TMSafetyNet    8
    com.apple.driver.AppleIntelCPUPowerManagement    218.0.0
    com.apple.iokit.IOSCSIBlockCommandsDevice    3.7.0
    com.apple.iokit.IOUSBMassStorageClass    3.7.0
    com.apple.AppleGraphicsDeviceControl    3.7.21
    com.apple.kext.triggers    1.0
    com.apple.iokit.IOSerialFamily    11
    com.apple.driver.DspFuncLib    266.5
    com.apple.kext.OSvKernDSPLib    1.15
    com.apple.iokit.IOAudioFamily    200.6
    com.apple.vecLib.kext    1.2.0
    com.apple.driver.AppleHDAController    266.5
    com.apple.iokit.IOHDAFamily    266.5
    com.apple.iokit.IOFireWireIP    2.2.6
    com.apple.driver.AppleSMBusPCI    1.0.12d1
    com.apple.iokit.IOSurface    97
    com.apple.driver.IOPlatformPluginLegacy    1.0.0
    com.apple.driver.AppleGraphicsControl    3.7.21
    com.apple.driver.AppleBacklightExpert    1.1.0
    com.apple.iokit.IONDRVSupport    2.4.1
    com.apple.driver.AppleSMBusController    1.0.13d1
    com.apple.iokit.IOGraphicsFamily    2.4.1
    com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.3.0f10
    com.apple.iokit.IOBluetoothFamily    4.3.0f10
    com.apple.driver.IOPlatformPluginFamily    5.8.0d49
    com.apple.iokit.IOUSBUserClient    705.4.0
    com.apple.driver.AppleSMC    3.1.9
    com.apple.driver.AppleUSBMultitouch    245.2
    com.apple.iokit.IOUSBHIDDriver    705.4.0
    com.apple.driver.AppleUSBMergeNub    705.4.0
    com.apple.driver.AppleUSBComposite    705.4.9
    com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.7.0
    com.apple.iokit.IOBDStorageFamily    1.7
    com.apple.iokit.IODVDStorageFamily    1.7.1
    com.apple.iokit.IOCDStorageFamily    1.7.1
    com.apple.iokit.IOAHCISerialATAPI    2.6.1
    com.apple.iokit.IOSCSIArchitectureModelFamily    3.7.0
    com.apple.driver.AppleThunderboltNHI    3.1.7
    com.apple.iokit.IOThunderboltFamily    4.2.1
    com.apple.iokit.IOEthernetAVBController    1.0.3b3
    com.apple.iokit.IOFireWireFamily    4.5.6
    com.apple.iokit.IO80211Family    700.52
    com.apple.driver.mDNSOffloadUserClient    1.0.1b8
    com.apple.iokit.IONetworkingFamily    3.2
    com.apple.iokit.IOAHCIFamily    2.7.0
    com.apple.iokit.IOUSBFamily    705.4.14
    com.apple.driver.AppleEFINVRAM    2.0
    com.apple.driver.AppleEFIRuntime    2.0
    com.apple.iokit.IOHIDFamily    2.0.0
    com.apple.iokit.IOSMBusFamily    1.1
    com.apple.security.sandbox    300.0
    com.apple.kext.AppleMatch    1.0.0d1
    com.apple.driver.AppleKeyStore    2
    com.apple.driver.AppleMobileFileIntegrity    1.0.5
    com.apple.driver.AppleCredentialManager    1.0
    com.apple.driver.DiskImages    389.1
    com.apple.iokit.IOStorageFamily    2.0
    com.apple.iokit.IOReportFamily    31
    com.apple.driver.AppleFDEKeyStore    28.30
    com.apple.driver.AppleACPIPlatform    3.1
    com.apple.iokit.IOPCIFamily    2.9
    com.apple.iokit.IOACPIFamily    1.4
    com.apple.kec.corecrypto    1.0
    com.apple.kec.Libm    1
    com.apple.kec.pthread    1
    Model: MacBookPro8,1, BootROM MBP81.0047.B04, 2 processors, Intel Core i5, 2.3 GHz, 4 GB, SMC 1.68f96
    Graphics: Intel HD Graphics 3000, Intel HD Graphics 3000, Built-In, 384 MB
    Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353737334448302D4348392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xD6), Broadcom BCM43xx 1.0 (5.106.98.100.24)
    Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 2 incoming serial ports
    Serial ATA Device: ST9320325ASG, 320.07 GB
    Serial ATA Device: HL-DT-ST DVDRW  GS31N
    USB Device: Hub
    USB Device: HUAWEI Mobile
    USB Device: IR Receiver
    USB Device: FaceTime HD Camera (Built-in)
    USB Device: Hub
    USB Device: BRCM2070 Hub
    USB Device: Bluetooth USB Host Controller
    USB Device: Apple Internal Keyboard / Trackpad
    Thunderbolt Bus: MacBook Pro, 20080d.0

    I have the same problem when I updated to OS X 10.10 I lost both my USB ports as far as they will not recognize anything that I plug into them.  The power part of the USB seams to work since it will recharge my Striiv Touch but nothing shows up when you connect anything to the ports.
    I have tried a number of things from rebooting, trying other usb devices that work on other systems with no problems but will not work on my Macbook Pro.
    Any Help out there?
    Hardware Information: ℹ️
    MacBook Pro (Retina, 15-inch, Late 2013) (Verified)
    MacBook Pro - model: MacBookPro11,3
    1 2.3 GHz Intel Core i7 CPU: 4-core
    16 GB RAM Not upgradeable
    BANK 0/DIMM0
    8 GB DDR3 1600 MHz ok
    BANK 1/DIMM0
    8 GB DDR3 1600 MHz ok
    Bluetooth: Good - Handoff/Airdrop2 supported
    Wireless:  en0: 802.11 a/b/g/n/ac
    System Software: ℹ️
    OS X 10.10.1 (14B25) - Uptime: 1:43:41
    USB Information: ℹ️
    Apple Internal Memory Card Reader
    Apple Inc. BRCM20702 Hub
    Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad

  • Usb port has power but wont read macbook pro

    I have a macbook pro with 2.4ghz intel core i7 mac os x version 10.7.3  and my USB ports recently stopped working.  They still power drives, but are not reading any information.  It's as if the devices do not communicate, though the powering function of the ports still works.  Any body know what I should do about this?

    This is what it says under the system profiler both when something is plugged in and not... in case that makes a difference.
    USB High-Speed Bus:
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c2d
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfa
    FaceTime HD Camera (Built-in):
      Product ID:          0x8509
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:          5.16
      Serial Number:          CC2BBJ063BDGFKL0
      Speed:          Up to 480 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa200000 / 3
      Current Available (mA):          500
      Current Required (mA):          500
    Hub:
      Product ID:          0x2513
      Vendor ID:          0x0424  (SMSC)
      Version:           b.b3
      Speed:          Up to 480 Mb/sec
      Location ID:          0xfa100000 / 2
      Current Available (mA):          500
      Current Required (mA):          2
    Apple Internal Keyboard / Trackpad:
      Product ID:          0x0252
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:          1.18
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa120000 / 5
      Current Available (mA):          500
      Current Required (mA):          40
    BRCM2070 Hub:
      Product ID:          0x4500
      Vendor ID:          0x0a5c  (Broadcom Corp.)
      Version:          1.00
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa110000 / 4
      Current Available (mA):          500
      Current Required (mA):          94
    Bluetooth USB Host Controller:
      Product ID:          0x821a
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:          0.37
      Speed:          Up to 12 Mb/sec
      Manufacturer:          Apple Inc.
      Location ID:          0xfa113000 / 7
      Current Available (mA):          500
      Current Required (mA):          0
    USB High-Speed Bus:
      Host Controller Location:          Built-in USB
      Host Controller Driver:          AppleUSBEHCI
      PCI Device ID:          0x1c26
      PCI Revision ID:          0x0005
      PCI Vendor ID:          0x8086
      Bus Number:          0xfd
    Hub:
      Product ID:          0x2513
      Vendor ID:          0x0424  (SMSC)
      Version:           b.b3
      Speed:          Up to 480 Mb/sec
      Location ID:          0xfd100000 / 2
      Current Available (mA):          500
      Current Required (mA):          2
    IR Receiver:
      Product ID:          0x8242
      Vendor ID:          0x05ac  (Apple Inc.)
      Version:          0.16
      Speed:          Up to 1.5 Mb/sec
      Manufacturer:          Apple Computer, Inc.
      Location ID:          0xfd110000 / 3
      Current Available (mA):          500
      Current Required (mA):          100

Maybe you are looking for