Drivers needed for Webcam 2 parallel

I lost my driver's cd, at the web I cann?t find the drivers for Webcam 2 parallel for Windows 98SE, where them are?

astolfex,
You can find the driver from the Asia driver website.
Jason

Similar Messages

  • Drivers needed for windows os upgrade?

    I'm updating my os from win98 to win2k.
    do i need new drivers for pci-7344, pci-6110e and ni-5411 (for pci). Labview version, i believe is 5.1, hardware and software purchased in summer 2001.
    Thanks,
    Byron Golden
    U of Houston
    Allied Geophysical Labs

    Hello.
    There are updated versions of the drivers you would need for those boards available on the web, but your LabVIEW version is very old and thus will not be compatible with those driver versions.
    Hopefully you have the CDs with your older driver versions on them. Many drivers are available on the web at:
    http://www.ni.com/downloads/
    You will need NI-Motion, NI-DAQ, and NI-FGEN for the 5411.
    Regards,
    Colin C.
    Applications Engineering
    Colin Christofferson
    Community Web Marketing
    Blog

  • Win7 64bit Drivers needed for pavilion touch laptop

    Hi 
    I have just bought a HP pavilion touchsmart 14-n056ea that came with windows 8. I am using it for work and they have given me a windows 7 pro 64bit OS to use instead as it works better with their systems. i have formatted the drive and installed the win7 OS now but the drivers online are only for windows 8. Can anyone please help me to source some windows 7 drivers. Below are the hardware id's for the ones that are popping up in yellow in the device manager.
    ethernet controller
    PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C&REV_08
    PCI\VEN_10EC&DEV_8136&SUBSYS_2161103C
    PCI\VEN_10EC&DEV_8136&CC_020000
    PCI\VEN_10EC&DEV_8136&CC_0200
    network controller
    PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C&REV_01
    PCI\VEN_10EC&DEV_8179&SUBSYS_197D103C
    PCI\VEN_10EC&DEV_8179&CC_028000
    PCI\VEN_10EC&DEV_8179&CC_0280
    pci communications controller
    PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C3A&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C3A&CC_078000
    PCI\VEN_8086&DEV_9C3A&CC_0780
    sm bus controller
    PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C22&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C22&CC_0C0500
    PCI\VEN_8086&DEV_9C22&CC_0C05
    usb controller
    PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C&REV_04
    PCI\VEN_8086&DEV_9C31&SUBSYS_2161103C
    PCI\VEN_8086&DEV_9C31&CC_0C0330
    PCI\VEN_8086&DEV_9C31&CC_0C03
    unkown
    ACPI\HPQ6007
    *HPQ6007
    graphics controller
    PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C&REV_0B
    PCI\VEN_8086&DEV_0A16&SUBSYS_2161103C
    PCI\VEN_8086&DEV_0A16&CC_030000
    PCI\VEN_8086&DEV_0A16&CC_0300
    i need a driver for audio too but windows is using its own one which seems to be working but would prefer the correct one.
    many thanks in advance guys.
    This question was solved.
    View Solution.

    Hi:
    You can use all of the W7 x64 drivers and software from this model, except the audio.
    DO NOT USE ANY BIOS OR FIRMWARE DOWNLOADS FROM THIS LINK
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=6521...
    Audio:  Install third and reboot.  Accept the agreement, download and install the second driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    To save you time wondering what drivers you need for the ID's you posted, here they are...
    sm bus controller.  Install first and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127793-1&cc=us&dlc=en&lc=en...
    graphics controller:  Install second and reboot.
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128860-1&cc=us&dlc=en&lc=en...
    ethernet controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127816-1&cc=us&dlc=en&lc=en...
    network controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-128935-1&cc=us&dlc=en&lc=en...
    pci communications controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127794-1&cc=us&dlc=en&lc=en...
    usb controller:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&dlc=en&lc=en...
    unknown:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&dlc=en&lc=en...

  • Drivers needed for hp pavilion 23-b012 windows 7 home 32 bit

    Hello Im running into a problem where i cant find no access to the internet in my device manager i have yellow marks on the following devices and need drivers for
    1. Ethernet Controller
    2. Network Controller
    3. PCI Device
    4. PCI Simple Communications Controller
    5. SM Bus Controller
    6. Some Unknown Device
    7. USB Mass Storage Device (Although it is reading the Flash Drive)
    This question was solved.
    View Solution.

    Hi:
    First install the amd chipset drivers and reboot.  You want the first file listed on the webpage.
    That will install the smbus and usb 3 controllers.
    http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2032
    Next install the graphics driver and reboot.
    http://support.amd.com/en-us/download/desktop?os=Windows%207%20-%2032#amd-catalyst-packages
    Next, install the audio driver and reboot.  Accept the agreement.  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    Ethernet controller:  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTy...
    Network controller:
    http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&s...
    PCI Device:  Download and install the first driver on the list.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
    I would need you to post the hardware ID's for the rest of the devices (unknown & PCI Simple Comms) in order to try and find drivers for them.
    To find a hardware ID for a device, please do the following...
    Go to the device manager, find the Other Devices category, and click on the Device needing drivers.
    Then click on the Details tab at the top of the device window.
    Now you see a Property drop down list and it is defaulted to Device Description.
    Drop down on that and select the second item on the list (Hardware ID's).
    Post the top string of characters that you see in the window.

  • 64-bit drivers needed for 7900

    I just purchased and installed a MSI NX7900GTX-T2D512E video card.  This is my first experience with MSI.
    I put in the installation CD and was told that my operating system isn't supported.  So, not only don't I have drivers but I don't get any of the bundled software either.
    My operating system is Microsoft Windows XP Pro 64.
    I've searched for drivers but haven't found any yet.  I don't see ANY on the MSI site for 64-bit.  Before I RMA this thing, can someone help me make it work?
    Additional info:
    ASUS A8N-SLI Deluxe motherboard
    AMD Athlon 64x2 CPU (dual core)
    (2) Kingston PC3200 1GB DIMM
    WD-Raptor 10,000RPM 74GB HD connected as JBOD in SATA RAID controller as boot drive
    I'm not finished building this thing and need to resolve this to either replace the video card wtih one that is compatible or make this one work so I can move on.
    Thanks in advance!

    Quote from: Richard on 11-May-06, 20:38:30
    Loader,
    Just to add to what DOK said, you always want to get the latest nVidia nForce as well as ForceWare Drivers for your Mobo and Vid Card.
    Take Care,
    Richard
    Any pointers?
    I have the new BIOS for the motherboard so it will work with the dual-core processor correctly.  I also have the new nVidia drivers. 
    The directions say to go to the new 665 drivers before updating the BIOS.  I can't figure out how to install those.
    So I said the hell with it and tried to update the BIOS.  There is no BIOS update tool on the ASUS CD as it describes in the manual and the FlashBIOS tool that allows you to do it from Windows doesn't seem to be available either (I suspect it's because I'm running the 64-bit version.
    So, I'm stuck.
    I'm not a rookie at this, but I's starting to feel like one!

  • Satellite P20-221: Drivers needed for Windows 7

    Hi,
    i would like to have windows 7 on my P20-221 but i just need few drivers to do that.
    In the first time, can i update my Bios ?
    In a second time, where i can find some toshiba programs (like touch key) compatible with windows 7
    And at last, i just have 4 drivers problems (controler IEEE 1394, modem pci, and 2 unknown peripherics).
    Thank you if you could help me.

    Hi
    The P20 is an oldie and the Win 7 drivers are not released officially for this notebook.
    I didnt find any on the Toshiba European driver page
    So I assume you will need to search for such drivers at your own hand.
    Tip: try to install Win 7 VAP (value added package) and Flash Card Support Utility which are released for newer notebook series like L500 or newer. Usually such tools are not notebook model related so maybe you could download and install this on this P20.
    Furthermore I recommend checking this:
    http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78
    This helps you to find drivers for some unknown devices.

  • Internal hardware drivers needed for HP 2000 Notebook.

    Perhaps someone can help me pull a pawn shop "bargain" back from a life of exclusive Linux service.  The previous owner had appearantly attempted to retrograde the notebook from Windows 8 to Windows 7 using a Win7 recovery disc and an image of another computer. So of course the entire system, recovery partition and all, were formatted away and replaced with an unauthorized and broken install of Windows.  I'm OK running Ubuntu on if for now, but I will eventually want to install a fresh copy of Windows and can't find the internal hardware drivers for my HP 2000 Notebook (product number C2M42UA) anywhere on HP support website.  Before wiping away the unauthorized Win7 install I looked at the device manager and remember Realtec HD audio and Intel HD video and have located those drivers elsewhere on the web, but can't be sure what else I'll need.  I do seem to recall that with the bad install the ethernet adapter was without a driver, for example.
    Where can I find a list of drivers for which to scavange the web?  Looks to me as if a hard drive failure will leave any newer HP computer in worse shape since they replaced the recovery discs with a recovery partition on the hard drive it's meant to restore.  Something I should keep in mind in future computer shopping.
    This question was solved.
    View Solution.

    Windows 7 driver download page for your model:
    http://support.hp.com/us-en/drivers/selfservice/HP-2000-2b00-Notebook-PC-series/5296210/model/530508...
    Remember, when you buy a new laptop they do not give you recovery disks. That has been true for many years. However, there is a Recovery manager that will let you make those disks and if you do that and store them in a safe place you are always able to recover your system. Windows itself also now has very good backup tools including the ability to make a complete system image of the computer in its current state (not factory condition) so there is no real reason you cannot be fully protected against a hard drive crash. 
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • English drivers needed for SB AWE32 CT3990

    Hello Everybody,
    I just bought a used SB AWE32 this week, but I am having 2 problems with it... First of all its all installation disks are in German language. I dont speak German. I need the English version. Second thing: the owner, who sold it to me didn't give me the Plug and play configuration manager disk 2, only the first one. (...and he doesn't find it anywhere...) The first disk alone doesn't work...
    So my question is if is there anybody, who has the same card with the English install disks such as the accessories, drivers, utilities, etc disks both for the DOS/win3., and for the Win95. I'd be very glad for any help.
    Those short stuffs that are available for download here at creative support site aren't enough, I'd like to have the original software pack somehow.
    Thanx very much in advantage for any help.
    Peter
    Message Edited by gyetvaipeter on 08-08-2009 08:22 AMMessage Edited by gyetvaipeter on 08-08-2009 08:23 [email protected]

    Look at your Private Messages on the top of the site.

  • Vista Drivers Needed for PC CAM

    Hello everyone,I need some assistance. I can't get my PC CAM 550 working with VISTA 32 Bit'scould someone please assist. I need drivers for PC CAM 550. Thank you?

    Toshiba does not support anything but windows XP pro and Vista 32bit OS's. There are some severe problems with this model of laptop (the P100) in regards to drivers (even under the supported vista 32bit. They fixed the graphics stuttering problem with the 4.2 bios release).
    You can try a driver from laptopdrivers2go or from some other site. As long as they state they support Nvidia Geforce GO 7900GS and not just Nvidia Geforce 7900GS they should work ok. Just keep an eye on your GPU temperature. If it gets too hot under your ESC key where the card is or you cannot feel any good airflow from the vents on that side try a different driver. And you don't need to worry that much about melting your card as your computer will turn off from overheating first. Just be careful and if that happens uninstall the drivers immediately and try a new set.
    Other than that you would have to get a new laptop.
    Hope it works for you.
    Edited by: ADMIN

  • Older Drivers needed for SB0790

    Hi,
    I need the old drivers for this sound card. I have a program that does not want to work with the new drivers and hence I need the old drivers
    Thanks
    Sravani

    I guess that SB0790 is a Soundblaster card, right? If it's a very old card, your plight seems hopeless. Before giving up, though, I would try doing some Web searches. Suggested searches: SB0790, SB0790 drivers, Soundblaster drivers, old Soundblaster drivers, driver archi'ves, old Creative drivers, etc. If you have the driver version number of the old drivers, you could search for that. The following site lets you do a driver search, but I'm pretty sure you're not going to find very-old drivers with it:?http://drivers.softpedia.com/progFinder?The drivers.softpedia site has many drivers, but I think they are all new, or fairly new.

  • All drivers needed for HP Notebook - 15-R249TU

    I need drivers for this model of HP but its not there now in your given link Software and DriversPlease help me to install its drivers. I have purchased this new laptop and I am totally screwed with HP now, will not prefer if you don't help me.

    Hi: This is a consumer to consumer forum, not HP technical support. No one will respond to any posts made here on behalf of the company, On every webpage it says this... † The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation  Here is the direct link to the W8.1 drivers for your model. http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/7486447/model/7748033 

  • Drivers needed for iPod to work?

    A couple of days ago, I received a free iPod Nano (2GB) from a promotional offer with my bank. There was no installation software disk included. From reading on the site, this is normal because everything you "need" is supposed to be in the latest version of iTunes.
    When I first plug my iPod into my computer, Windows recoginizes it as an iPod and prompts me to go through the new hardware installation. The installation then fails because no driver software is found/available for the iPod.
    I have the latest version of iTunes. ITunes will open and all my music is there and playable. My iPod just will not show. My iPod is fully charged. I have gone through all of the 5 R's multiple times including the 6th R, which is REALLY FRUSTRATED!!!
    Basically, I need a software driver so that Windows will recognize my iPod. I have read here that iTunes has them or something? However, iTunes will not recognize my iPod because it's simply just not there. Device Manager in Windows has the yellow exclamation point on the iPod.
    I have tried multiple USB ports. I have tried upgrading all of my Windows utilities up to date. I've never really had any problems with anything installing/connecting to my computer until now. I'm really starting to disbelieve all of the iPod hype and am getting extremely frustrated with it because it's not seeming very intuitive or user friendly.
    Any help getting Windows to recognize/install the software for the iPod will be extremely appreciated. I'm getting ready to eBay the thing because it's really becoming a headache. Maybe you could help me realize that iPods are where it's at and help me solve this dilema! Thanks!
    Don't know if this helps, but my computer specs are:
    Windows XP
    AMD Athlon(tm) XP 2500+ (1.83 GHz)
    1 GB RAM
    80 GB hard drive
    Self-built   Windows XP  

    Do you have Windows XP with Service Pack 2, or just Windows XP?
    I believe SP2 is a requirement, as it contains the needed USB drivers for Windows.

  • Drivers needed for AMD ATI Mobility Radeon Series

    1//
     this card is AMD ATI Mobility Radeon™ HD3650/HD3450/HD 3670/HD4570/HD565v/HD4670/HD4330/HD5450/HD5650/HD5470/HD4200/HD5730/HD550v/HD540v/HD545v
    Graphics Driver   , WINDOWN 10 don't support  it ,
    pls write to code for it , i'm very like this kernel (win 8.1 ) and want to use  it . Thanks
    MS .
    2//
    and :Raster images like JPEG in my computer
    http://www.mediafire.com/download/2syw01l9d9i8e6y/Untitled.png

    1//
     this card is AMD ATI Mobility Radeon™ HD3650/HD3450/HD 3670/HD4570/HD565v/HD4670/HD4330/HD5450/HD5650/HD5470/HD4200/HD5730/HD550v/HD540v/HD545v
    Graphics Driver   , WINDOWN 10 don't support  it ,
    pls write to code for it , i'm very like this kernel (win 8.1 ) and want to use  it . Thanks
    MS .
    2//
    and :Raster images like JPEG in my computer
    http://www.mediafire.com/download/2syw01l9d9i8e6y/Untitled.png
    You need to contact AMD directly to advise them of the problem.  AMD has sole responsibility for the publication of the hardware drivers for their products.  Microsoft does not write hardware drivers for any third party hardware.  Drivers
    supplied by Windows update are supplied by the original publisher to Microsoft who in turn distributes the drivers via Windows Update.
    So, it is your responsibility to report the problem directly to AMD for the ultimate resolution.
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

  • Drivers needed for Satellite Pro L20

    im running a satellite pro L20 with windows XP, but i dont have the cd that comes with the pc so i cant install the drivers, can sum1 tell me wat drivers i need 4 my sound card or wat sound card is in the pc

    On the Toshiba recovery image you will find a option to create a own divers and tools CD.
    Enter the Toshiba Assist on the desktop and go to the protect and fix. There is this option for tools & driver CD creating
    or you will donwload the drivers ;)

  • Drivers needed for executable

        I've got a VI created in LV 8.0 that uses DAQmx
    & IMAQ drivers which I would like to convert to an exe & use on
    a destination system.
    My understanding is that the minimum set of things I would need to install on the destination is :
    DAQmx & IMAQ drivers
    LV Run Time Engine 8.0
    I use some VIs from the IMAQ Vision 7.1.1 software - does this have to be installed as well ?
    Are there any options I should watch out for when going thru the executable creation process ?
    Much thanks,
    ak

    Hi,
    It sounds like you are on the right track.  You will need to include DAQmx, IMAQ, and the
    LabVIEW run-time engine.  If you are
    using Vision VI’s you will also need to include the Vision runtime engine.  I is recommended to use Vision 8 if you are
    using LabVIEW 8.  If you are using Vision
    8 you can download the installer here.
    But if you want to use the Vision 7.1.1 runtime then you
    will need to call in and talk to one of our sales representatives. 
    Also if you are using IMAQdx, or IEEE 1394 then you will
    have to purchase those for the target computer as well. 
    If you want to make a stand alone installer, then you need
    to include all of those drivers as additional installers.  To have vision as an additional installer
    follow the steps included in this KB
    Here is how to do it if you are using LabVIEW 7.1.
    http://digital.ni.com/public.nsf/websearch/1A9A18AA574ABEDF86256F780062C240?OpenDocument
    Let me know if you have any other questions.
    Regards,
    GG

Maybe you are looking for

  • Calling a webservices from Oracle 10G ( 10.2.0.2)

    Hi: I am in the process of putting a database Java stored procedure that can call an external webservices. PL/SQL Wrapper -> Java Stored Procedure-> External Web services I loaded the following jars in the dataase. dbwsa.jar dbwsclient.jar 1. I am ha

  • Notes snapping in the wrong position?

    I am experiencing an annoying problem in Garage band 11 (6.0.4). I'm writing a music placing notes along the track and using software instruments. The problem is that after a while, the notes start to fall out of place and play on the wrong tempos. e

  • Non Java files in a Java application

    Hi, I'm not exactly new to Java, but I haven't been able to find a satisfactory answer to the following, and I guess rather basic, questions: Let's assume that in our app we want to use image files such as .gif or whatever other kind of resource. 1.

  • Cannot publish changes since upgrade to iWeb09

    Hello, I created and edited a website using iWeb08, and then upgraded to 09. I made some changes including deleting photos and adding new ones, and tried publishing directly to my (non mobileme hosted) site. This failed -- it seemed to be ok but then

  • Importing .avi file into premier pro CS3 without losing quality

    I have used CAMStudio to capture datalogging on my screen. The file size is 1280 x 800 pixels with a frame rate of 200 frames/second. I have tried using virtual dub and many other programs to create an avi file that I can import into premier without