Drivers not being injected for certain Laptop model

Hi all
I am having difficulty getting a new laptop to deploy correctly. I am using MDT 2012 U1.
I use the DriverGroup001 variable to set the driver group and inject the specific drivers required, and this works perfectly for 10 other models. However we recently acquired some Dell Latitude E7240's and am experiencing a weird problem.
When deploying from our Production share, the drivers are not injected in the PE stage. However I have tried to deploy the same laptop using our completely separate test network and the drivers are deployed correctly. I have also created a separate test
share on our live network (with the same customsettings.ini) and the drivers deploy correctly here as well?! I have placed the drivers in a selection profile to specifically target them during deployment and they are still not injected. Inluding the drivers
in the PE image has also not worked.
So I have narrowed the problem down (I think) to a particular MDT share. I've deleted all the drivers in this share and readded the 7240 drivers with no luck. I've closed the share, rebooted the server and added the drivers with still no luck.
Looking at the logs I can see why I think it is failing, here are the relevant sections:
Unsuccessful deployment in production share:
Property DriverGroup001 is now = Windows 7\x64\Dell Inc.\Latitude E7240 ZTISetVariable 20/02/2014 09:17:12 0 (0x0000)
ZTISetVariable processing completed successfully. ZTISetVariable 20/02/2014 09:17:12 0 (0x0000)
Event 41001 sent: ZTISetVariable processing completed successfully. ZTISetVariable 20/02/2014 09:17:12 0 (0x0000)
Processing drivers for an X64 operating system. ZTIDrivers 20/02/2014 09:17:12 0 (0x0000)
OSDTargetDriveCache was determined earlier : C: ZTIDrivers 20/02/2014 09:17:12 0 (0x0000)
Property OSDTargetDriveCache is now = C: ZTIDrivers 20/02/2014 09:17:12 0 (0x0000)
Property OSDisk is now = C: ZTIDrivers 20/02/2014 09:17:12 0 (0x0000)
Property DriverCleanup is now = DONE ZTIDrivers 20/02/2014 09:17:12 0 (0x0000)
Compare Image processor Type with Original [X64] = [X64]. ZTIDrivers 20/02/2014 09:17:12 0 (0x0000)
Open Control File: Drivers ZTIDrivers 20/02/2014 09:17:12 0 (0x0000)
Filtered.Count: 0 ZTIDrivers 20/02/2014 09:17:13 0 (0x0000)
Updating downlevel OS configuration. ZTIDrivers 20/02/2014 09:17:13 0 (0x0000)
Vista identified, skipping update of Device Path ZTIDrivers 20/02/2014 09:17:13 0 (0x0000)
ZTIDrivers processing completed successfully. ZTIDrivers 20/02/2014 09:17:13 0 (0x0000)
Successful deployment in test share:
Setting variable DriverGroup001 to value Windows 7\x64\Dell Inc.\Latitude E7240 ZTISetVariable 19/02/2014 17:01:23 0 (0x0000)
Property DriverGroup001 is now = Windows 7\x64\Dell Inc.\Latitude E7240 ZTISetVariable 19/02/2014 17:01:23 0 (0x0000)
ZTISetVariable processing completed successfully. ZTISetVariable 19/02/2014 17:01:23 0 (0x0000)
Event 41001 sent: ZTISetVariable processing completed successfully. ZTISetVariable 19/02/2014 17:01:23 0 (0x0000)
Processing drivers for an X64 operating system. ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
OSDTargetDriveCache was determined earlier : C: ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
Property OSDTargetDriveCache is now = C: ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
Property OSDisk is now = C: ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
Property DriverCleanup is now = DONE ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
Compare Image processor Type with Original [X64] = [X64]. ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
Open Control File: Drivers ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
Filtered.Count: 136 ZTIDrivers 19/02/2014 17:01:23 0 (0x0000)
For reasons I cannot figure out, the unsuccessful deployment doesn't find any drivers?? (filtered.count: 0)
Can anybody help me with this issue? I have been trying the best part of 3 days to fix this and any help would be incredibly appreciated!

http://freelance-it.com.mx/forma-correcta-de-utilizar-la-pestana-drivers-dentro-de-mdt-2013/
Freelance-IT http://www.freelance-it.com.mx

Similar Messages

My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

My ipod shuffle is not being recognized by Computer, laptop or itunes. But im able to charge it externally ! What can i do to rectify this ?

Have you tried each and every single suggestion in this Apple support document yet?
iPod not recognized in 'My Computer' and in iTunes for Windows
Has this iPod Shuffle ever been able to successfully connect with this PC and sync with iTunes or is the first time you are connecting the iPod Shuffle to this PC?
B-rock

How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.

How can i update my old 2006 iMac Intel core 2 duo running 10.6.8 to OSX Lion so that I can sync using iCloud with my newer devices? Mountain Lion is not an option for my older model and Lion is no longer available at App store.

Call Apple's online store's telesales agents: 1-800-MY-APPLE (1-800-692-7753) or Customer Service and Sales Support at 1-800-676-2775. For Lion you'll get a redemptions code via e-mail and need to DL from the Mac Apple Store (requires SL 10.6.6+).

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

My iPhone is not being detected on my laptop itunes. How do I get it to appear under devices?

iPhone, iPad, or iPod touch not appearing in iTunes

HT4061 my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

my iPhone unexpectedly shut down and now is not turning back on, charging and is not being detected by my laptop, help

i put that i held down the home button and all that... sorry, should of made my message a little clearer hun.. but i did try that, ive been searching video's on the net trying to figure out how to fix the problem, but nothing seems to be working... ive just tried pluging the usb lead into my phone while holding the home button then connecting it to my computer to see if itunes fires up, but even that didnt work... i dont know what else to try.

Suppliers which are active and not being involved for a long time

Hi All,
Is there any way we can find suppliers which are active but not being used for a long time (for a specific duration) . i.e being involved in no open POs or no invoices processed or no payments made.
Please advice.
Thanks

Hi Abhi,
I have created some queries for the same. COuld you help me if I am going in the rite direction.
I have created a query to find the suppliers which are not being used in the POs for the past one year by using the below query: But for invoices and payments to be included, I am finding it a bit difficult....need help..............
--FINAL QUERY
SELECT vendor_id, vendor_name, creation_date, last_update_date
FROM po_vendors v
WHERE v.end_date_active IS NULL
AND v.enabled_flag = 'Y'
AND NOT EXISTS (
SELECT 1
FROM po_headers_all h
WHERE h.vendor_id = v.vendor_id
AND h.creation_date(+) BETWEEN (SYSDATE - 365) AND (SYSDATE))
ORDER BY vendor_id DESC
Is it possible to send me the program so that it would be helpful for me to use it.
email: [email protected]
Help Greatly appreciated.
Thanks
Aman

HT1807 I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How dan i be sure that i am not being charged for roaming?network , I am still showing a network

I am out of the country. I turned my cellular data off and connected to wiFi . However, it is still showing that i am connected to a network. How can i be sure that i am not being charged for roaming?

Make sure data roaming and cellular data is turned off. If you don't want to receive calls or SMS then put your phone in airplane mode and reactivate WiFi

Fairly new battery not charging after not being used for a while

My computer (Elitebook 2530p) has not been used for a while, perhaps a month or two. The battery used to hold for over 3 hours of light use.
Now, the battery won't charge with the message "0% available (plugged in, not charging)"
I can't find a battery refresh utility in the BIOS, or any way to interact with the battery. Is there something I'm missing? Should the battery just go dead after not being used for a while?
Update: fixed typo

I've run the HP battery check and got the code REOOW. Battery is dead, and I am out of warranty. I can't think of any possible reason why this should have happened.
What does this code (REOOW) mean?

Notifications are not being generated for any emails that have rules applied to them.

Notifications are not being generated for any emails that have rules applied to them. Any clues how to fix this?

In System Center 2012 Operations Manager, the alert notification will be sent when the alert first meets all criteria, regardless of resolution state, unless resolution state itself is a criterion. If alert suppression is enabled for the rule or monitor
that raises an alert, only one notification will be sent when the subscription criteria are first met. No additional notifications will be sent until the alert is closed and a new alert is raised that meets all subscription criteria. PLease check
1) whether your rule has trun on alert supression
2) Close the alert, craised by rule, and do it again
Roger

TS1567 My ipod touch is not being recongnised by my laptop, not even receiveing charge, any help gratefully received.

My ipod touch is not being recongnised by my laptop, not even receiving charge, please help!?

I am afraid that the solution did not work... the ipod touch of mine seems really not functioning. It receives an electric isgnal from the computer but it doesnt sync at all... Whenever I put my ipod touch off and plug it to my computer it turns on but it doesnt sync... .. Moreover, I have used different PCs so as to try it syncing.. I have used mac book pro and windows 7 laptops but it gives similar feedback, which is NO FEEDBACK at all...

Agreements Not Being Picked For SFTP Protocol in Oracle 11G

Hi Anuj ,
PFB the Details of the Issue :
Agreements are not being picked for SFTP protocol even though From TP , To TP , Document Type and Revision are picked correctly .
We are running on MLR11 , Version : 11.1.1.4.0 . Also we have set b2b.useCPAid to false in EM Properties so that Agreement is picked based on DocType Name , Revision and Partner Id's .
Also when we used File Protocol its working Fine . The problem exists for SFTP Protocol .
Error Code : B2B-50547
Error Description Machine Info: (gwl09072appg084) Description: Agreement not found for trading partners: FromTP TestEbxml, ToTP BTGS with document type rqRequestServiceRequest-1.0-INBOUND.
Patch Level : 14114625
Regards,
Rohith

Hi Anuj ,
Thanks for the reply .
Yes we are setting the Filename Format explicitly in the LC . As far as we have understood , naming convention FromTP_MSGID.xml
is used to identify the TP and also MSGID is used to avoid duplicates and identification xpath is set to identify the Action .
When we are using %FROM_PARTY%_%TO_PARTY%_%DOCTYPE_NAME%_%DOCTYPE_REVISION%_%TIMESTAMP%.xml , All parameters are identified as expected and Agreements are also being picked when we are using File Protocol . Only when we are trying with SFTP Prtocol , even though all values are being picked correctly , only agreement is not being picked . Could you please help ?
Regards,
Rohith

[svn:osmf:] 14928: Fix bug FM-468: Initial and max indices not being respected for RTMP MBR.

Revision: 14928
Revision: 14928
Author:   [email protected]
Date:     2010-03-22 17:35:43 -0700 (Mon, 22 Mar 2010)
Log Message:
Fix bug FM-468: Initial and max indices not being respected for RTMP MBR.
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-468
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/net/NetStreamSwitchManager.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/TestNetStreamSwitchManager.as

Programs which are not being executed for a specific period

Hi,
We are planning to do the application upgrade in few months,with respect to that we would like to find out what all programs/transactions(standard or custom) which are not being executed for a specific period.What is the way to find this?
Regards,
Sam

Hi Sam,
You can use st03 and defice theprograme name and period to sotp the activity.
Regards,
Anil

Overhead user exit (COOM0001) not being triggered for specific plant

Hello all,
I was wondering if anyone came across this situation before. I activated user exit COOM0001 for overhead calculation. This user exit is triggered when I create PCE for plant A but not plant B.
I can't figure out why it is not being triggered for plant B at all. I put a break point in function module EXIT_SAPLKASC_001, EXIT_SAPLKASC_002 and EXIT_SAPLKASC_003 and the system didn't stop in anyone of these function module.
Any help is greatly appreciated.
Regards,
Cassandra

Hi
It seems that you are a Functional Consultant.
Please follow the following simple step for any userexit to see where all its been called.
1. Go To T. Code SMOD
2. Enter the Exit name COOM0001
3. Click on the COMPONANTS RADIO BUTTON and DISPLAY
4. U get Function Modules
EXIT_SAPLKASC_001
EXIT_SAPLKASC_002
EXIT_SAPLKASC_003
5. Now individually double click on each FM and put a break point ther.
6. Open a new session and see wheather it stop at the break-points of the T. code you are looking for.
I havent used this user exit, so no comments on how it ll be use ful.
Reward points if useful
Thank-You
regards
vinsee

Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

Anybody know what's up with the menu.xml.files not being available for DW after installing on a new comp?

Usually that error can be cleared up by renaming the personal config folder. Turn on your OS's hidden files and then go to...
C: > Users > your username > AppData > Roaming > Dreamweaver (version) > your language > configuration
Rename the configuration folder configuration-old and start DW up. That should create an entirely new configuration folder and correct the menu.xml file.

Drivers not being injected for certain Laptop model

Similar Messages

Maybe you are looking for