Drivers not installing on Win 7 x64 on 27" iMac

I originally posted this to the iMac forum but was told this might be a better place:
I'm struggling to install the correct sound and display drivers on my 27" Intel iMac for Windows 7 64-bit. The problems I'm trying to address are:
Inability to select screen resolution with correct aspect ratio (currently using 1920x1440, which is vertically squashed)
I suspect Windows is ignoring the iMac's graphics card
No sound
All hardware is working fine in OSX. This is what I've tried:
After installing Windows, installed the drivers included on the Snow Leopard Installation DVD
Updated Bootcamp to 3.1, then 3.2
Noticed Device Manager doesn't list Radeon HD 5750 -- is using "Standard VGA Graphics Adapter" and "Generic PnP Monitor"
Tried installing ATI Catalyst Control Center repeatedly (Suite version and not), after installing .NET Framework 4 and after removing the existing display drivers. (I'm not sure I removed the existing drivers correctly though. I uninstalled them through the Device Manager and tried using Driver Sweeper to confirm that they were removed, but was unable to get that program to work.) So far CCC gives me an installation success screen, but never appears in the system tray.
Any advice on fixing this would be much appreciated. Thank you for reading.

Hi, unfortunately no, I ended up having to purchase a PC for other reasons before I figured out how to fix this.

Similar Messages

  • Amd video drivers not working after win 10 upgrade

    AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again.  Alienware here i come.

    Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad.  FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

  • Flash Player 10 Not installing on Win 7 64 bit PC

    Flash Player 10 download goes through install procedure and says it is installed but it is not.
    After that There is always  a Flash Player Install file on the PC.
    When I click on that it goes through the install procedure and says it is installed but it is not.
    Have tried above install more than 6 different times. Also on my wife's new PC.
    Always the same bad result.
    These two new PC's are both on WIN 7 64 bit OS.

    I tried the suggested method of uninstall and then install.  Also the disable instructions for Norton AV.
    Still no success.  When I again check the list of programs in Control Panel for possible uninstall the Flash Player 10 has returned there.
    But the player does not play when needed for some videos on Facebook, etc.
    One thing I could not find to disable on Norton AV was "Smart Firewall."  It was not in my NAV 2011.
    Any other suggestions appreciated.
    Frank Mitch
    Date: Thu, 24 Feb 2011 11:51:01 -0700
    From: [email protected]
    To: [email protected]
    Subject: Flash Player 10 Not installing on Win 7 64 bit PC
    Hi, I would try this method and see if it works better. There is a link for FF(Firefox) If you don't use FF, ignore that. Also before you begin this procedure, I need to know what Anti-Virus/Spyware programs you have Installed. Some will block the Install of Flash Player and that needs to be taken care of first.
    Download and SAVE to your Desktop the Uninstaller:
    http://kb2.adobe.com/cps/141/tn_14157.html
    Download and SAVE to your Desktop the Installer for IE- use the EXE Installer
    http://www.adobe.com/products/flashplayer/fp_distribution3.html
    Download and SAVE to your Desktop the Installer for FF- use the EXE Installer for plugin based (from the same site)
    Close all browser windows, you only want to be looking at your Desktop.
    Disable any messenger services, as yahoo, msn, etc in the system tray(area near the clock)
    Be sure to use the Administrator Account.
    Run the Uninstaller and when finished, Reboot(restart) your computer.
    Run the Installer for IE, Run the Installer for FF(If needed/used) and when finished, Reboot.
    Then go to this test site and test each browser:
    http://www.adobe.com/software/flash/about/
    You may want to print these instructions to make it easier to follow. If you have any questions, let me know.
    Thanks,
    eidnolb
    >

  • PC suite - Cable drivers not installed???

    After installing the PC suite VER 6.82.22.0, though PC recognizes N70 phone, the PC suite does not get connected. When clicked 'About PC suite' and 'system info', message cable drivers not installed is found. However, if checked in the control panel, the drivers are found installed. The earlier version did not have any problems. Can any body solve this.

    try this:
    /discussions/board/message?board.id=pcsuite&message.id=11480

  • HP 5610xi "drivers not installed"

    Setup and printed from a HP 5610xi on a iBook G4 (10.3.9) using USB. Then tried to setup through Airport Express (USB printing enabled)-Rendezvous 'sees' the printer but "drivers not installed' message stops the process? 'Latest' HP drivers are installed

    HP 'answered' my question - the 5610 AIO is not compatible with the Airport Express! Compatible list is at: http://h10025.www1.hp.com/ewfrf/wc/genericDocument?lc=en&cc=us&docname=c00035369

  • Computer says itunes drivers not installed?

    computer doesnt recognize ipods. tried to update itunes and it shut my computer down and blew out all my ports. had computer repaired, seems that update worked but cant plug in ipods to sync music and the box comes up saying the itunes drivers not installed. how do i install them? im  a little hesitant to download itunes again after what happened last time, so just wanted some advice.

    No, you will not lose your library. The actual installation and where your files are stored are in separate locations. When you uninstall, you are only uninstalling the program, and therefore, your library will not be affected.
    Only thing to note is if you changed the location of your itunes library, you will have to tell itunes where you keep your library, so itunes can load it from there.

  • Anyone successfully installed Windows 7 x64 Enterprise on iMac running OSX 10.9.3?

    I am trying to install Windows 7 x64 Enterprise onto IMac (late 2013 model) that has Maverick OSX 10.9.3 installed.  We have done this in the past, before upgrading to 2012R2, and using 10.9.2 OSX. 
    When I create the TS media using x64 WinPE, insert into the IMac and boot - the boot selection pulls up.  I select the USB EFI boot (only one that loads and it starts running WinPE and pulling up the Task sequence selection.  I think the issue
    is with the partition table.  Before installing Windows - I exit with F8, run diskpart, which shows 3 primary partitions.  I add a 4th and format as NTFS.  I now have 4 primary partitions - none that show as EFI.  The TS starts, checks
    requirements, and tried to download the preinstallation environment to the disk as the TS tells it to install to disk 0, part 4 with no formatting and fails with 0x8007000f. 
    If I use diskpart to clean the drive and boot with the USB  to EFI, let SCCM select Bios or UEFI, it will detect to UEFI, download the PE environment and apply the OS.  When it reboots, it does not recognize the hd, showing a flashing folder. 
    Any help or comments are appreciated. 
    Thanks
    Zander.wheels

    Hi,
    I recommend you use Boot Camp to create partition.
    Boot Camp is a multi boot utility included with Apple Inc.'s OS X that assists users in installing Microsoft Windows operating systems on Intel-based Macintosh computers.
    http://en.wikipedia.org/wiki/Boot_Camp_(software)
    http://support.apple.com/kb/HT3986
    Note: Microsoft provides third-party contact information to help you find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Device drivers not installing

    GOt a palm pilot tx, need to put a kaba access control system on it.  Tried win 7 64 bit computer, vista 32 bit computer, xp 32 bit computer and win 2000 computer.  drivers will not install with plug and play nor with installation cd.  I can't find anything online, as I am the only IT guy and I have many projects on the go right now.  Any help would be appreciated.
    Post relates to: Palm TX

    PalmOS devices do not use "plug and play" to install software.  They use a software program called "Quick Install" to install apps.  Install Palm Desktop on the 32bit XP computer, then try the installation disk.
    Echoing what smkranz said, are you sure you're trying to install a PalmOS program?
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Adobe Acrobat 8 - file updates not installing on Win 7 Professional

    How do I install MSP file updates to Adobe Acrobat after downloading them? I have just installed Acrobat 8.0 from the original installation CD on a new PC running Windows 7 Professional (64 bit) and have downloaded the update to 8.1.0 to begin with, but on clicking it get the error messsage 'This patch could not be opened. Contact the application vendor to verify that this is a valid Windows Installer patch package'. Updater is not working at all. It says it cannot find any updates. Even when I place the MSP file in the Updater folder to which it is supposed to download updates, it does not find updates. What is wrong? Why won't this patch install? Thank you! I really don't want to be stuck with 8.0.0 when I know that years of updates through to 8.3.1 are available, but for some reason they will not install intuitively.

    Hi ,
    Acrobat 8 is not compatible with Win 7. Please find the mentioned Kb: http://helpx.adobe.com/x-productkb/policy-pricing/system-requirements-acrobat-family-produ cts.html#main_System_requirements_for_Acrobat_8_Pro showing system requirement for installing Acrobat 8. As Acrobat version 8 is very old product so I would recommend you to purchase Acrobat11 which has more enhanced features and functionalities.
    Regards,
    Romit Sinha

  • TS1538 I have a 4th generation iPod. My system is Windows 7 64-bit. iPod not recognized in iTunes. Also getting iTunes error about cd/dvd drivers not installed. I have reinstalled 4 times and finally got iPod software installed properly. Please help!

    I have a 4th generation iPod. My system is Windows 7, 64-bit. iPod not recognized in iTunes. It is in my computer. Also getting iTunes error message about cd/dvd drivers not properly installed. I've restalled 5 times and still not working.  Finally got iPod software to properly install. Please help!

    Did you try this:
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • Itunes 12.1.0.71 will not install on win 7 error 1053

    I have a BIG problem...cannot install 12.1.0.71...The install gets about 90% thru and then I get the error....Windows could NOT start Apple Mobile Device Services error 1053...The Service did not respond......after trying all the solutions I found online I called Apple support and paid 99$(which was not refunded) and two of their techs...the supposed top level Cathy...was unable to help....after two hours of work....they can remotely see and guide me as to what to try and it was mostly what was published online at apple support re how to really uninstall Itunes properly which we did about 6 times...and still it would not get past the "windows could not startt AMDS and errors 1053 and service did not respond and error 7 win error 193 and itunes helper not installed correctly....those later errors occur when you ignore that AMDS did not start...etc....
    So I am kind of stuck....
    Other things we tried....Disable Norton....Clean the registry using Norton Utilities....No other hidden Viruses around all clear on that....Win 7 totally updated....used the windows service that checks just about every kind of possible bug in system from the MS site...no help there...
    In the whole process I lost the ability to restore to an earlier version that worked that disappeared off the restore calendar.
    SO HELP!!!!!!!!!!!!!!????????????

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If the advice above doesn't resolve things you could try this alternate version:
    iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
    which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
    Or roll back to the previous build:
    iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
    iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
    tt2

  • Photoshop Elements 12 does not install on Win 8.1 64bit

    Hi!
    My system: Windows 8.1 64 bit with all patches, 32GB Ram and engough HD space.
    I downloaded PSE 12 32bit and Premiere Elements 12 64bit. Both won't install.
    Problems:
    Premiere: Installation fails when shared components should be installed. I spent more than 2hrs trying every tip I found in forums. Same result.
    Photoshop: It always tries to deinstall Elements 12 (which is definetely not installed) and fails becaus of "Specified path is empty". It was never fully installed. I cleaned all folders manually, I deleted registry entries according forum advise. I rebooted. I put the installation files onto C:. Before I installed, I deinstalled Elements 9. I also cleaned those files. An no, I did not deinstall my Antivirus. I cannot deactivate it and deinstalling is a very very bad option.
    What I already tried:
    10 reboots
    Deinstall old version
    Clean Temp folder
    Clean Registry
    Delete all folders and hopefull all registry "Elements" entries
    Archive OOBE Folder
    Moved installation Files to C:
    Start Installation as Administrator
    Monitored if any other Adobe program is running - killed all
    Any help is much apreshiated. I am desperate and about to return the products.
    Michael
    Added solution attempts.

    Ok, I had many problems with the installation, but after three attempts I've got it working. This might work with a previously failed installation - but there are other guides in the forum to get this position -thanks also to the many threads on the this - which pointed me in the right direction
    Previously I'd had issues with Error 1935, (on Shared Technologies), Blue screens due to clbudf.sys from Cyberlink Instant burn which blue screened (thread abort exception) this install as also iTunes. (I haven't installed this now...
    My scenario. Win 7 (clean) -> Win 8 -> Win 8.1
    After setting up the setting up the system.
    I ensured the following : (although begrudingly) so I could do a system restore if needed.
    -I disabled Anitvirus & Firewall
    -enabled Volume Shadow Copy Service
    I then ensured I had downloaded Adobe Application Manager 8.0 (read this may help) - I installed - but I did not run it as I believe it updates to Adobe CC Manager( from previous attempts)
    i also downloaded and installed the 32 bit versions of :
    C++2008 redistributable (32 bit)
    C++2008 SP1 redistributable (32 bit)
    I installed Premiere Elements (64 bit) - note I had previously installed Sony Vegas 10 Platinum, which downloaded and installed NET 3.5/Net 2.0 adding to windows features, which many have helped - not sure.
    I installed Photoshop Elements (32 bit)
    I started both apps and updated them to 12.1.
    Happy ... finally - hope this helps others - or at least helps adobe improve their installer, diagnose the issue for others.

  • HP Security Manager 7 not installing in Win 7 (64 bit)

    Hello Tech Gurus, This is very surprising.  I was using HP Protect Tool Security Manager 7 for last 3 years. But there were some problems due to which I uninstall all the HP security softwares and tried to install Validy Finger Print Driver, Security Manager, HP Face Recognition software. So I downloaded the latest driver from the below HP site. https://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5229456&swLangOid=8&swEnvOid=4059 sp57486 - Security Manager (7.0.1.1199)sp58940 - Face Recognition for HP ProtectTools (7.2.1.4548)sp64338 - Validity Fingerprint Sensor Driver  (4.4.228.0) Fingerprint Driver got installed but Security Manager and Face Recognition software is not installing.When trying to install Security Manager its saying "This Software is not supported on this system". Its not possible because I have used the same software earlier. Even I tried to install previous version of Security Manager which I downloaded 2 years back and woked fine also. But getting the same error. I am not able to understand how to resolve the issue? Can anyone please help me? System - Probook 4540sOS - Win Prof 7 ( 64 bit) Thanks,Suvendu  

    USB-Parallel converters can be problematic.  The models listed in posts flagged here have been verified by users to work with 64 bit Windows 7.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Latest Vista 64 bit drivers not install

    It don't matter what I do, I cannot get the "SBXF_PCDVTBETA_L3_2_0_0000" drivers working with my X-fi Fatality sound card.
    Things I have done:
    Turned off the signiture thingy as per the read-me (both at start-up and premient way)
    Turned off windows firewall
    Turned off Windows Defender
    No Antivirus/Firewall/Spyware/Adware protection
    Run the file as a normal user and right clicked and selected "run as administrator".
    Made sure no previous sound drivers were installed.
    As soon as it gets to the "Updating the windows files", I get another box come up:
    Creative Device Driver Installation has stopped working.
    A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is avalible.
    The only button I have is, close program, I click that and it goes to the audio console. At that stage I cancel the installation because ther sound apps dont work without the sound driver.
    So I am left with a very muted PC.
    My PC Specs:
    Windows Vista Beta 2 5384
    AMD Athlon 4000 2.4 Ghz
    Asus Geforce 7800GT
    2GB of RAM
    Proacti've Asus A8n-Sli Deluxe Motherboard
    Asus TV card
    Creative X-fi Fataty Soundcard
    Logitech 2. Speakers
    Hopefully somebody can help me out with my issue
    Thanks alot
    Scott Seggons Message Edited by Seggons on 07-5-2006 09:05 PM

    Boot Camp will not support Vista on newer iMacs, you will need to upgrade to Windows 7. Also as an FYI there is a Boot Camp forum, you can locate it by clicking Apple Support Communities and then in the search field type Boot Camp.
    Best of luck,
    Roger

  • ISE Webpack, Cable Drivers not installing for Debian Wheezy

    Trying to install ISE Webpack with cable drivers yield the following error during installation:
    Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
    Since drivers are not installed, attempting to launch iMPACT later on gives:
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT - Module windrvr6 is not loaded. Please reinstall the cable drivers. See Answer Record 22648.
    WARNING:iMPACT:923 - Can not find cable, check cable setup !
    The entire install.log can be found here:
    --Install log = /tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log
    --Installing cable drivers.
    --Driver versions in this package: windrvr=1301, xpc4drvr=1041
    --Script name = /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers
    --HostName = invidia
    --Current working dir = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
    --Script location = /home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1
    --Script argument=/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE.
    Digilent Cable Drivers Installer
    Checking for prerequisite: libusb-1.0
    libusb-1.0.so.0 is present
    Installing component: Digilent Adept Runtime
    Adept Runtime Installer
    64-bit operating system detected
    Installing runtime libraries.....
    Checking to see if libdabs.so is already installed....
    Existing installation of libdabs.so found. Checking to see if this version should be installed.
    Version 2.11.1 is currently installed. Version libdabs.so.2.11.1 will not be installed.
    Checking to see if libdaci.so is already installed....
    Existing installation of libdaci.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdaci.so.2.7.2 will not be installed.
    Checking to see if libdaio.so is already installed....
    Existing installation of libdaio.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdaio.so.2.7.2 will not be installed.
    Checking to see if libdemc.so is already installed....
    Existing installation of libdemc.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdemc.so.2.7.2 will not be installed.
    Checking to see if libdepp.so is already installed....
    Existing installation of libdepp.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdepp.so.2.7.2 will not be installed.
    Checking to see if libdftd2xx.so is already installed....
    Existing installation of libdftd2xx.so found. Checking to see if this version should be installed.
    Version 1.0.1 is currently installed. Version libdftd2xx.so.1.0.1 will not be installed.
    Checking to see if libdgio.so is already installed....
    Existing installation of libdgio.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdgio.so.2.7.2 will not be installed.
    Checking to see if libdjtg.so is already installed....
    Existing installation of libdjtg.so found. Checking to see if this version should be installed.
    Version 2.10.1 is currently installed. Version libdjtg.so.2.10.1 will not be installed.
    Checking to see if libdmgr.so is already installed....
    Existing installation of libdmgr.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdmgr.so.2.7.2 will not be installed.
    Checking to see if libdmgt.so is already installed....
    Existing installation of libdmgt.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdmgt.so.2.7.2 will not be installed.
    Checking to see if libdpcomm.so is already installed....
    Existing installation of libdpcomm.so found. Checking to see if this version should be installed.
    Version 2.10.1 is currently installed. Version libdpcomm.so.2.10.1 will not be installed.
    Checking to see if libdpcutil.so is already installed....
    Existing installation of libdpcutil.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdpcutil.so.2.7.2 will not be installed.
    Checking to see if libdpio.so is already installed....
    Existing installation of libdpio.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdpio.so.2.7.2 will not be installed.
    Checking to see if libdpti.so is already installed....
    Existing installation of libdpti.so found. Checking to see if this version should be installed.
    Version 2.8.2 is currently installed. Version libdpti.so.2.8.2 will not be installed.
    Checking to see if libdspi.so is already installed....
    Existing installation of libdspi.so found. Checking to see if this version should be installed.
    Version 2.8.2 is currently installed. Version libdspi.so.2.8.2 will not be installed.
    Checking to see if libdstm.so is already installed....
    Existing installation of libdstm.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdstm.so.2.7.2 will not be installed.
    Checking to see if libdtwi.so is already installed....
    Existing installation of libdtwi.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libdtwi.so.2.7.2 will not be installed.
    Checking to see if libjtsc.so is already installed....
    Existing installation of libjtsc.so found. Checking to see if this version should be installed.
    Version 2.7.2 is currently installed. Version libjtsc.so.2.7.2 will not be installed.
    Successfully installed runtime libraries.
    Installing system binaries.....
    installed "/usr/local/sbin/dftdrvdtch"
    Successfully installed system binaries in "/usr/local/sbin".
    Installing firmware images.....
    Successfully installed firmware images in "/usr/local/share/digilent/data/firmware".
    Installing JTSC device list.....
    Successfully installed JTSC device list "/usr/local/share/digilent/data/jtscdvclist.txt".
    Installing CoolRunner support files.....
    Successfully installed CoolRunner support files in "/usr/local/share/digilent/data/xpla3".
    Installing CoolRunner 2 support files.....
    Successfully installed CoolRunner 2 support files in "/usr/local/share/digilent/data/xbr".
    Installing Adept Runtime configuration.....
    Successfully installed Adept Runtime configuration "/etc/digilent-adept.conf".
    Installing USB UDEV rules.....
    Successfully installed USB UDEV rules "/etc/udev/rules.d/52-digilent-usb.rules".
    Successfully reloaded UDEV rules.
    Successfully updated dynamic loader cache.
    Successfully installed Adept Runtime.
    Successfully installed component: Digilent Adept Runtime
    Installing component: FTDI Drivers (libftd2xx)
    FTDI Driver Installer
    64-bit operating system detected
    Checking to see if libftd2xx.so is already installed....
    Existing installation of libftd2xx.so found. Checking to see if this version should be installed.
    Version 1.0.4 is currently installed. Version libftd2xx.so.1.0.4 will not be installed.
    Successfully updated dynamic loader cache
    Successfully installed FTDI Driver
    Successfully installed component: FTDI Drivers (libftd2xx)
    Installing component: libCseDigilent
    Installer for Plugins for Xilinx Tools
    Plugins will be installed in the following directory: "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
    Found plugin "libCseDigilent" version "14.1" by "Digilent".
    Successfully installed plugin in "/tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/lib/lin64/plugins/Digilent/libCseDigilent".
    Successfully installed 1 plugin(s) for Xilinx Tools.
    Successfully installed component: libCseDigilent
    Successfully installed Digilent Cable Drivers
    --Kernel version = 3.2.0-4-amd64.
    --Arch = x86_64.
    --Installer version = 1100
    --Unsetting ARCH environment variable.
    --File /lib/modules/misc/install_windrvr6 does not exist.
    --Installing USB drivers------------------------------------------
    --File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusbdfwu.hex version = 1030
    --File xusbdfwu.hex exists.
    --File xusbdfwu.hex version = 1030
    --File xusbdfwu.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xlp.hex version = 1028
    --File xusb_xlp.hex exists.
    --File xusb_xlp.hex version = 1028
    --File xusb_xlp.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_emb.hex version = 1028
    --File xusb_emb.hex exists.
    --File xusb_emb.hex version = 1028
    --File xusb_emb.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xpr.hex version = 2004
    --File xusb_xpr.hex exists.
    --File xusb_xpr.hex version = 2004
    --File xusb_xpr.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xup.hex version = 1030
    --File xusb_xup.hex exists.
    --File xusb_xup.hex version = 1030
    --File xusb_xup.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xp2.hex version = 2300
    --File xusb_xp2.hex exists.
    --File xusb_xp2.hex version = 2300
    --File xusb_xp2.hex is already updated.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex exists.
    --File /etc/hotplug/usb/xusbdfwu.fw/xusb_xse.hex version = 2006
    --File xusb_xse.hex exists.
    --File xusb_xse.hex version = 2006
    --File xusb_xse.hex is already updated.
    --Product ID 0007 is already in the usermap.
    --Product ID 0009 is already in the usermap.
    --Product ID 000d is already in the usermap.
    --Product ID 000f is already in the usermap.
    --Product ID 0013 is already in the usermap.
    --Product ID 0015 is already in the usermap.
    --Product ID 0008 is already in the usermap.
    --Installing windrvr6---------------------------------------------
    --Checking version.
    --File /lib/modules/3.2.0-4-amd64/kernel/drivers/misc/windrvr6.ko does not exist.
    --File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko does not exist.
    --Setting source version to 1301.
    --File LINUX.3.2.0-4-amd64.x86_64/windrvr6.ko is newer than the destination file.
    USE_KBUILD = no
    checking for cpu architecture... x86_64
    checking for WinDriver root directory... /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64
    checking for linux kernel source... found at /lib/modules/3.2.0-4-amd64/build
    checking for lib directory... ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT)_32.so /usr/lib/$(SHARED_OBJECT).so; ln -sf $(ROOT_DIR)/lib/$(SHARED_OBJECT).so /usr/lib64/$(SHARED_OBJECT).so
    checking which directories to include... -I/lib/modules/3.2.0-4-amd64/source/include
    checking linux kernel version... not found
    make -f makefile.wd clean
    make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make -f makefile.wd
    make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make -f makefile.wd
    make[1]: Entering directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    make[1]: Leaving directory `/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/linux_drivers/windriver64/windrvr'
    --make windrvr install rc= 2
    --install_windrvr6 rc = 2
    --Module windrvr6 is not running.
    --Module xpc4drvr is not running.
    --Note: By default, the file permission of /dev/windrvr6 is enabled for the root user only
    and must be changed to allow access to other users.
    --real rc=2
    --Driver installation failed.
    --Digilent Return code = 0
    --Xilinx Return code = 1
    --Return code = 1
    INFO ::Mon Dec 02 10:59:01 TZ 2013:: Console message preference has been changed to INFO
    INFO ::Mon Dec 02 10:59:01 TZ 2013:: Xilinx Installer/Updater launched.
    INFO ::Mon Dec 02 10:59:05 TZ 2013:: Proxy choice: IE
    INFO ::Mon Dec 02 10:59:05 TZ 2013:: install version: 14.7
    INFO ::Mon Dec 02 10:59:05 TZ 2013:: dat file URL: www.xilinx.com/direct/swhelp/14_wiclient.dat
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: /tmp/xilinx_ise_webpack/14.7/ISE_DS
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Acquire or Manage a License Key
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Edition : ISE WebPACK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE DS Common
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: common
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: ISE DS Common
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: EDK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: EDK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: EDK
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: PlanAhead Analysis Tool
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: PlanAhead
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: PlanAhead Files
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: setupEnv.sh
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: ISE
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Install Location: ISE
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: Design Environment Tools
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Module: WebPACK Devices
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Linux System Generator Info XML
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Ensure Linux System Generator Symlinks
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Enable WebTalk to send software, IP and device usage statistics to Xilinx (Always enabled for WebPACK license)
    INFO ::Mon Dec 02 11:03:14 TZ 2013:: Option: Install Cable Drivers
    INFO ::Mon Dec 02 11:08:59 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:08:59 TZ 2013:: Migrating registry and creating file association
    WARN ::Mon Dec 02 11:08:59 TZ 2013:: Unable to copy "/home/andreas/documents/diku/master_thesis/Xilinx_ISE_DS_14.7_1015_1-1/common/idata/.pref.bin" to "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/.xinstall/idata/.pref.bin" source does not exist.
    INFO ::Mon Dec 02 11:09:00 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:11:41 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:11:41 TZ 2013:: Migrating registry and creating file association
    INFO ::Mon Dec 02 11:11:42 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:13:23 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:13:23 TZ 2013:: Migrating registry and creating file association
    INFO ::Mon Dec 02 11:13:24 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:19:00 TZ 2013:: fileset.txt written.
    INFO ::Mon Dec 02 11:19:00 TZ 2013:: Migrating registry and creating file association
    INFO ::Mon Dec 02 11:19:01 TZ 2013:: Post-GUI updates completed.
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: setupEnv.sh
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: Install Linux System Generator Info XML
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen/util/ensure_symlinks.sh /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE/sysgen lin64
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/PlanAhead/data/webtalk/webtalk_install.sh on
    INFO ::Mon Dec 02 11:19:07 TZ 2013:: Execute: /bin/sh -c "/tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/install_script/install_drivers/install_drivers >>/tmp/xilinx_ise_webpack/14.7/ISE_DS/.xinstall/install.log /tmp/xilinx_ise_webpack/14.7/ISE_DS/ISE"
    INFO ::Mon Dec 02 11:19:14 TZ 2013:: Driver installation failed. Please check the /.xinstall/install.log file for more information on the cause of the installation failure.
    INFO ::Mon Dec 02 11:19:36 TZ 2013:: Execute: /tmp/xilinx_ise_webpack/14.7/ISE_DS/common/bin/lin64/xlcm
    INFO ::Mon Dec 02 11:20:14 TZ 2013:: Xilinx Installer/Updater exited with return status "0".
    INFO ::Mon Dec 02 11:20:14 TZ 2013:: ################################################################
    What are the steps required to fix the drivers on Debian Wheezy?
    Thanks in advance
    Andreas Frisch

    I'm a bit surprised that the only supported Linux distros are commercial (costing money) distros!
    What's the point in providing Linux support for your tools then. The overwhelming majority of Linux users use free distros like Mint, Ubuntu, Debian, Fedora etc.
    I had exactly the same problem and now I'm forced  to BUY a Linux distro in order to build PetaLinux?
    Anyway, a) are there any plans to support these tools on the more popular (free) distros? and b) Does anyone know if we can use CentOS 6, since that's supposed to be a community (free) clone of the supported (but not free) RHEL 6 distro?
    Anyone know of an 'unsuported' Linux distro that 'works' anyway (especially for the cable drivers)?
    It LOOKS as if that one cable driver install issue is the only thing preventing us from using a boat load of other distros. Can't this be fixed?
     

Maybe you are looking for