Drivers not loading on Windows XP for ENET-485.

I'm no dummy or I wouldnt have gotten this fare. Checking "device manager" and the "diagnostic utility" I cant seem to get my newly purchased NI-485 to work on my Windows XP machine for lack of recongnized drivers. I cant even fine the ".inf" file myself. Any ideas? Software package loaded just fine, several times.

Thanks for the kind reply. However I still have the problem, after a few weeks of hacking at I seem to understand what the problem is but I cant seem to fix it. I see it with the diagnostic utility, as it if fails identify the right ports, and I can see the ports assigned in the device manager, but the devices are failing to actually connect as a com port. Ie any programs cannot see the actual com port as the device mananger has them assigned. I've tried this on two different computers now,two different OS's same results. I'm convinced it's something I'm doing wrong on the set up.

Similar Messages

  • Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • TS1814 I can't seem to get the drivers downloaded on my windows laptop for my iphone 5s, the info is coming up generic and im getting a code 1.  Please help

    I can't seem to get the drivers downloaded on my windows laptop for my iphone 5s, the info is coming up generic and im getting a code 1.  Please help

    All necessary drivers are included in the iTunes install package.
    Please clarify exactly what the problem is.
    the info is coming up generic and im getting a code 1
    That's not very informative.

  • Microsoft ODBC drivers not loaded??

    Hi All:
    When I want to import tables to repository then there is error that i facing. Microsoft ODBC drivers not loaded. Can anybody tell why its happens and how can i solve it. Thanks
    Ali

    Hi,
    Please try this first:
    FIX: Error "Datetime field overflow" When Inserting Negative (B.C.) Dates with Oracle ODBC Driver
    http://support.microsoft.com/kb/250286/en-us
    Since it is more related to Access you can ask in office forum or MSDN forum:
    http://social.technet.microsoft.com/Forums/office/en-US/home
    http://social.msdn.microsoft.com/Forums/office/en-US/home?forum=accessdev
    Thank you for understanding.

  • My computer will not load the device drive for my ipone 5. I have uninstalled, reinstalled itunes

    my computer will not load the device driver for my ipone 5. I have uninstalled, reinstalled itunes; i have restarted phone; disabled startup devices for windows 7; restarted my computer; Please help- very frustrated

    Device not recognized
    http://support.apple.com/kb/TS1538
    Note: You should only sync to one computer

  • Organizer will not load in Windows 8

    Organizer will not load in Windows 8 directly.  If Editor is opened first Organizer will load photos but THEN converts them to hourglasses.  Hourglasses will open if double clicked.  I have no idea what is going on.

    Do you have any other suggestions?  FYI - this same software is installed on a desktop computer and I do not have this problem.  When I click on "Organizer", it goes into it.  The desktop is windows XP and the laptop is windows 7.  When I first installed this on the laptop it worked fine.  I downloaded all my pictures to photoshop.com, and started to have problems after that.  I keep getting a message that my online storage is full, but I do not want to add more. Do you think my problem would be solved if I delete my photoshop.com account?  Would this affect any of my pictures or albums on my computer?

  • I can make a WiFi connection but pages will not load. WiFi works for a laptop using windows

    I can make a WiFi connection but pages will not load.  WiFi works ok on a laptop using Windows.  I have reset the WiFi settings but this makes no difference.

    Thanks, Linc, but  that almost helped:
    Because the retina 15 only has a wifi connection (no ethernet), that's the connection I'm stuck with for the notebook. But on the 27iMac, I did have both ethernet and wifi enabled. When I turned the wifi off on the 27, therer was a brief moment when both computers were showing their counterparts when I tried to make a network connection. BUT, after a few seconds of 'searching', the computer I was trying to connect to disappeared from the Network list.
    So I tried the opposite; the retina can only connect thru wifi, so that's a given. I swithched my ethernet off and then enabed the wifi on the 27 and ....same thing: When I try a network connection, there are a few seconds of 'searching', then the ony option I'm left with is share screen, which doesn't work either.
    I've read the 'dropped' network is a problem with the retina, but the odd thing is that I never lose my internet connection—that continues to work fine, as does Air Drop—but I can't seem to connect, network-wise.
    Any ideas about the dropped network?

  • Can SATA drivers be loaded in windows????

    Hi,
    I forgot to click on F6 when loading windows XP to install my SATA drives.  How can that be done now that XP has been installed? 
    I also have drive letters all over the place.  HD1 is I and HD2 is J.  I think I can change them in system maint.
    Thanks,
    Swen

    Hello Swen,
    Glad to see you made it back to this forum after the database program they experienced last night. Tried to send you a personal message this morning but you were not even in the database anymore. Hope you got my last message.
    You do not need to install SATA drivers with F6 during windows installation. The F6 step described in your manual is only needed if you intend to install your operating system to a SATA drive or a RAID set up. If your operating system is being install to IDE drive then your SATA driver can be installed later on after you  got windows on board as part of the Nvidia 5.10 drivers package. If you are really intending to install your operating system to a SATA drive then go to this thread: https://forum-en.msi.com/index.php?topic=76886.0
    If not, you will have windows XP set up, goto device manager  and then left click on + sign in front of "IDE ATA/ATAPI controllers" & then right click on "Nvidia nForce4 Serial ATA controller" & then select properties. In the new windows that opened select the driver tab. This will list what you have installed as a SATA driver.
    Whatever you do make sure that you get the latest Nvidia 5.10 drivers package from the Nvidia site itself. I believe that MSI site still only offers version 5.03.
    For your drive letter question simply click on start and then "Help and Support". When help and support windowns opens up, type this in the search window and then press the search arrow: "assign change or remove a drive letter". You can then look at the left hand result window and select "assign change or remove a drive letter". The right hand pane will now offer you two methods to use to proceed:
    1- Windows interface
    2- Command lines
    How is your daughter's system coming along?

  • Dv7-6160ca usb 3 drivers not loading

    So I have did a fresh install of windows 7 on this laptop and the whole left side usb is not working and I can't seem to get the usb3 drivers to load. I downloaded many different drivers from the web site and none worked. The laptop is only four days old.
    This question was solved.
    View Solution.

    Hi,
    Just to double check, go into Device Manager, right click on either problem device and select Properties.  Click the Details tab, choose Hardware Ids from the dropdown box and post back with the details shown under Value.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • T61 USB Human Interface Device drivers not loading after undocking

    I have a T61 and after I undock (correct method, by pressing the eject button on the docking station and waiting for it to turn green) the laptop from my advanced docking station, the external mouse does not work.  More specifically, this is the error message that I can see in the USB Human Interface Device with the yellow ! in Device Manager.
    "Windows cannot load the device driver for this hardware because a previous instance of the device driver is still in memory. (Code 38) "
    Is there a fix for this? If I reboot the laptop then I can get my external mouse to work because the drivers  can load, but I don't want to have to reboot after undocking.

    Regarding your keyboard problem, it seems to be a very low-level problem. The driver cannot access the Control Registers on the Keyboard. By going down from your error message to the lowest level, one can see that it's probably a simple "outb" operation (write data on a specified address, shouldn't fail if the address is correct...) that doesn't succeed.
    So I think you defintely need to look in your BIOS if you didn't deactivate something when upgrading, or messed with some address space, or many things I cannot think of right now.
    Good luck

  • W7/64 USB Drivers not loading on boot-up

    Installed W7/64 onto clean SSD with all ThinkPad items added and updated off the Driver Matrix (W500).
    Using with 2503 Dock I have up to 13 USB devices attached .. just like in former WXP-SP3 setup.
    Now when I start the system, only my Logitech LASER mouse (with USB transceiver) driver loads ... ALL others have yellow flag (not loaded). Strange is that this even affects my expansion slots ... that don't register until  USB flagged drivers are manually updated.
    Further I looked in the windows/system32/drivers folder and none of the several USB driver files are present.
    Is there a way to repair this situation without the agony of reinstalling everything.
    Please, advise.

    csc4096 wrote:
    OS X Lion on a Mac Mini with Microsoft Intellimouse
    Installation worked with no errors but now when I boot up the mouse cursor is at the top left of the screen and refuses to work until I manually unplug it and push it back in again. Annoying to say the least.
    Have you tried another mouse?  Have you tried a different USB port?  If the mouse is plugged into a hub, have you tried plugging directly into the Mac?
    Also the scroll-reversal option is missing from the relevant control panel.
    Any sensible suggestions?
    To confirm, can you screen shot the Mouse System Preference?
    If all else fails, you can install Scroll Reverser.  It was for Lion developers to get accustomed to the Lion-style scrolling before Lion was released, but it works just fine in Lion for these unusual situations.  (e.g.: older Macbook Pro without a multitouch trackpad.)

  • Encore CS6 not loading under windows 8

    I have purchased a new computer running windows 8. Everything runs fine in Creative Suite CS6, except that Encore will not load. Any thoughts?

    >I have the same problem as Gregoryden and this worked.
    >There's no error message for me. Encore just crashes as it starts up.
    >That's what I was referring to in my first comment. Encore will run as Administrator
    That that solves your problem... you Run as Administrator
    Since gregoryden who started this discussion has never returned, we can only hope

  • ITunes will not load in Windows

    I've been trying to load iTunes on my XP PC and it wont work. I try going into system processes and it says iTunes is running a process (not window but process) and isn't loading any window at all. I try ending the process and restarting it, but it wont end the iTunes.exe process. If it helps, this has all started since I download the update for iTunes from 6.04 to 6.05 I believe. Thank you.
      Windows XP  

    OK, so here is the story.
    1) I downloaded the new version of iTunes last night.
    2) It worked fine then
    3) It will not show up as a window when I try to open it, but when I do CTRLALTDELETE, it shows up in the Processes tab but not in the Application tab.
    4) I re-downloaded the installer and re-installed it.
    5) That did nothing.
    6) I kept trying to end the iTunes.exe process in the Processes tab, but to no avail.
    7) I went here and looked for help.
    8) I tried turing off the anti-virus and all that stuff, and it didn't help.
    9) I'm back here, still looking for help.

  • Internet  pages not loading correctly with Explorer for Macintosh 5.1

    I received the Ibook from my brother-in-law after his death. I've updated it with 512 ram and the newest version of OS X for this Ibook. When I access a web page with explorer for Macintosh 5.1 the page is not loaded correctly. it seems to wraparound , some heading overlap each other. Some pages won't load at all. When there are scroll bars and they are used, all that shows is blank. I'm use to the windows environment and am just preparing this machine for my brother to use to access the internet in his retirement. Am I missing some plug-ins or set-up?

    It looks like most people in the OS 9 Forum are recommending the wamcom-131-macos9-20030723.sit download available from this page:
    http://wamcom.org/latest-131/
    You have to sort through a lot of builds to find the correct one, but that looks to be it for Mac OS 9.
    I'm not sure that any browser version for Mac OS X 10.0.4 will work satisfactorily at this point in time, Jim. They are all likely to be as creaky as Internet Explorer 5.1, I'm afraid.
    lvg416, you may want to post about the problem in the Mac OS X v10.3 & earlier > Using Mac OS X Forum:
    http://discussions.apple.com/forum.jspa?forumID=745
    I did a little poking around in there, but not many people are using Mac OS X 10.0 (and for good reason). Personally, I didn't find Mac OS X usable until Mac OS X 10.3 (Panther) came on the scene.

  • ITunes 8.01 not loading on Windows XP Pro

    I've been trying to load iTunes on my XP PC and it wont work. I try going into system processes and it says iTunes is running a process (not application but process) and isn't loading any window at all. I've installed and uninstalled and restarted countless times, but the problem is still there!
    I've also tried messing with the msconfig tools
    (http://docs.info.apple.com/article.html?artnum=302538), but no avail, can anyone help please?!

    If you have silent launch failure (i.e. no error message) AND iTunes.exe persists on the processes tab, here is a troubleshooting method.
    It is intend to diagnose the cause of the problem and you will need to feed back the results of the various steps with error messages in full.
    Troubleshooting silent launch failure in Windows XP
    Before checking if iTunes works, restart your PC or close the iTunes.exe process with task manager if it is running.
    A couple of simple things to try:
    http://support.apple.com/kb/TS1776?viewlocale=en_US
    Stop the bonjour service, this FAQ has instructions:
    http://support.apple.com/kb/HT2250?viewlocale=en_US
    But usually it is due to a problem with cryptographic services.
    Check to see if you have your smart card service and that it is not set to disabled. For some reason iTunes needs it.
    Start>>Run>>Services.msc
    you should find the smart card service in the list. Report back with your findings.
    Malware can interfere with cryptographic services and also prevent a resolution so it is important to check that your system is clean before proceeding: Run a virus and spyware scan with up to date definitions.
    Then work through *Method 4* in the following link:
    http://support.microsoft.com/kb/822798
    You should be able to copy and paste the individual lines to save on typing.
    Make a careful note of any error messages you get, they are important for diagnosis. Report back any error messages especially the names of any dlls mentioned.
    If there are no errors try starting iTunes.

Maybe you are looking for