Drivers not supported model HP 15-r074TU

i have installed windows 7 64 bit but display drivers are not supported. i also contact hp care, they also mailed me driver link(Intel HD graphics) but when i am opening this, the display dialog saying "This computer does not meet the minimum requirements for installing the software."
So please tell me the proper OS and its architecture for this model (HP 15-r074TU) and give me all the supported drivers...
thank you
This question was solved.
View Solution.

fix them here:
http://support.hp.com/us-en/drivers/selfservice/HP-15-Notebook-PC-series/6875200/model/7308904#Z7_30...
Wisnu Suryandi

Similar Messages

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

Tktds6xx drivers not supported by Windows 7

I've just upgraded from Windows XP to Windows 7. It turns out that Tektronics does not support a tktds6xx driver for Windows 7. Does this mean that I can no longer write software that supports those scopes? I noticed that they do support a tktds7xx driver. Could I cheat and use that one?
Solved!
Go to Solution.

Of course you are right. It seems that all I needed to do was restart the computer, figure out the OO way of storing driver code, and find where they put the dll file. It seems using the old dll file doesn't work. It's hard to ask the right questions when you haven't figured out what the problem really is yet.

Officejet J4550 All-in-One Software and Drivers not supported in Windows 7

Windows 7 (automatic) and I (manual download from HP site) tried to install the printer driver software (64 bit system) and got an error software not supported. Went to the windows update site and the Officejet 4500 series was not listed. Is there any solution to this problem?

Run the install .exe file in compatibility mode for Vista SP2. Can someone explain to me how to do this?

CIMC 2.0.x and FlexFlash partitions for SCU, HUU, Drivers not supported?

Hello all,
We are fairly new to UCS, but are hooked for sure. We started purchasing B series blades, chassises, and FI's at first, and now are in the process of deploying C-Series Servers. Very cool stuff, then does Cisco takes some of it away, maybe?
We just purchased a C240, and noticed the FlexFlash card. After initial reading we see that you can have a Server Configuration Utility (SCU), Host Update Utility (HUU), and Drivers Partitions on the FlexFlash. Along with a 4th HyperVisor (HV) partition, which started this journey for us as we are going to install ESXi onto the FlexFlash.
But by the time we got to reading about and managing FlexFlash, we had already upgraded the CIMC & Bios to 2.0(1)b. We only see the one large ~16GB HV partition, and with SCU 4.0 there isn't much you can do about that. After reading the release notes for CIMC 2.0, we read:
Starting with this version, the SD storage device is available to Cisco IMC as a single hypervisor (HV) partition configuration. Prior versions had four virtual USB drives.
So does this mean that after CIMC 2.0, SCU, HUU, and Driver Partitions are unsupported on FlexFlash? Or is there a process to get these utilities back on FlexFlash? Because the documentation does not really make it clear one way or the other. It would seem to be a nice feature, but i would also understand why the reasons not to support it. As I'm sure the HUU updates just as fast as firmware.
Thanks for your time and support,
Nick

This is very confusing. Just received our first c-class server (220m3) with sd card preinstalled, and reading the online docs about the scu and huu partitions. Great feature! Could not see the partitions in CIMC and believed the sd-card was empty and needed to be initialized.
Followed the flexflash docs to get the card up and running:
http://www.cisco.com/c/dam/en/us/solutions/collateral/data-center-virtualization/unified-computing/whitepaper_C11-718938.pdf
Having spent one entire day getting the SD card to work as documented.
Now, after reading this thread, I'm even more confused (and a little frustrated) - and would really like at least the scu to be bootable from the card.
The experiences here are:
1. Booting downloaded iso image SCU via kvm (virtual image)
2. Configure network - dhcp does not work.. (tried earlier SCU, there dhcp does work.. but no update-icon...). Configures manually then.
3. After network is configured, either manually or dhcp - the Update flexflash icon disappeares..
Hitting the Update flexflash icon (after new reboot, without configuring network), a window appear with empty content. DOH.
Booting all day trying different cisco manuals and approaches to get this to work, waiting for the long boot process each time.
I would recommend that the cisco documents online are revised so we don't need to run through loops and endless cisco-pdf-redirections for nothing.
Cheers,
Martin

Failed to load Sorce Model: Encoding or code set not supported

Hello,
I have tried to migrate an informix-db with error "Failed to load Sorce Model: Encoding or code set not supported".
Informix: 7.3.1
Unix: Reliant-Unix 5.45
Repository: Oracle 8.1.7 (64bit) EE [tested with the same output 8.1.6]
Unix: Reliant-Unix 5.44
error.log:
** Oracle Migration Workbench
** Release 2.0.2.0.0 Production
** ( Build 20011121 )
** ORACLE_HOME: D:\wntapp\omwb
** user language: de
** user region: DE
** user timezone: ECT
** file encoding: Cp1252
** java version: 1.1.8.10
** java vendor: Oracle Corporation
** o.s. arch: x86
** o.s. name: Windows NT
** o.s. version: 4.0
** Classpath:
D:\wntapp\omwb\Omwb\olite\Oljdk11.jar;D:\wntapp\omwb\Omwb\olite\Olite40.jar;C:\Programme\Oracle\jre\1.1.8\lib\rt.jar;C:\Programme\Oracle\jre\1.1.8\lib\i18n.jar;D:\wntapp\omwb\Omwb\jlib;D:\wntapp\omwb\Omwb\jlib\Omwb.jar;D:\wntapp\omwb\jlib\oembase-9_0_1.jar;D:\wntapp\omwb\jlib\netcfg.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer6.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer7.jar;D:\wntapp\omwb\Omwb\plugins\SQLServer2K.jar;D:\wntapp\omwb\Omwb\plugins\Sybase11.jar;D:\wntapp\omwb\Omwb\plugins\Sybase12.jar;D:\wntapp\omwb\Omwb\plugins\MSAccess.jar;D:\wntapp\omwb\Omwb\plugins\MySQL.jar;D:\wntapp\omwb\Omwb\drivers\mm.mysql.jdbc-1.2a;D:\wntapp\omwb\Omwb\plugins\Informix7.jar;D:\wntapp\omwb\Omwb\drivers\ifxjdbc.jar;D:\wntapp\omwb\lib\xmlparserv2.jar;D:\wntapp\omwb\rdbms\jlib\xsu111.jar;D:\wntapp\omwb\jdbc\lib\classes111.zip;D:\wntapp\omwb\lib\vbjorb.jar;D:\wntapp\omwb\jlib\ewt-swingaccess-3_3_18.jar;D:\wntapp\omwb\jlib\ewt-3_3_18.jar;D:\wntapp\omwb\jlib\ewtcompat-3_3_15.jar;D:\wntapp\omwb\jlib\share-1_1_9.jar;D:\wntapp\omwb\j
lib\help-3_2_9.jar;D:\wntapp\omwb\jlib\ice-5_06_3.jar;D:\wntapp\omwb\jlib\kodiak-1_2_1.jar
** Started : Mon Feb 18 13:39:24 CET 2002
** The following plugins are installed:
** Informix Dynamic Server 7.3 Release 2.0.2.0.0 Production
EXCEPTION : LoadTableData.run() : IDS7_SYSCOLUMNS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTABLES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSUSERS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSBLOBS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSVIEWS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCOLDEPEND Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSREFERENCES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSOBJSTATE Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTRIGGERS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTRIGBODY Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSSYNONYMS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSSYNTABLE Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSDEFAULTS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCONSTRAINTS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCHECKS Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSPROCEDURES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSINDEXES Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSTABAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSROLEAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSPROCAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSCOLAUTH Encoding or code set not supported.
EXCEPTION : LoadTableData.run() : IDS7_SYSPROCBODY Encoding or code set not supported.
Please help.
Thanks
G. Grosche

Looks like this error is comming from the Informix JDBC Driver.
what version of the JDBC Driver are you using and is there anything special
about the character set you used to create your database?
Can you build a simple Java app to connect to the same database with the same JDBC Driver?
Jim.

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says '' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit

I want to edit my raw images on cs5 photoshop. But when I go to open the .CR2 file it says
'' Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information. ''
When I go to updates in photoshop help i try to update photoshop and photoshop camera raw but it then says
'' Updates could not be applied the error log file may help you in identifying the problem. Then, try updating again. If the problems persist, contact customer support for further assistance.
Photoshop Camera Raw 8.7.1(CS6) There was an error installing this update. Please quit and try again later. Error Code: U44M1I216 ''
I dont know how to get around this please help

CR2 files from which Canon camera?
Supported cameras are listed here
Camera Raw plug-in | Supported cameras

Just downloaded mavericks, now iPhoto won't load because of an error message that says "You can't open the application "IPhoto" because it is not supported on this type of Mac" . I have a 17" MacBook Pro, mid 2010 model running 2.53 GHz and Intel Core I5,

I just downloaded the new Mavericks operating sytem on my mid 2010 MacBook Pro, 17" 2.53GHz, Intel Core I5 machine. My IPhoto is no longer working at all, I'm getting an error message that says - "You Can't open the application "IPhoto" because it is not supported on this type of Mac". I also loaded Mavericks onto my other MacBook Pro 17", mid 2009 model and everything works fine. I would think that the newer Mac would easily work with IPhoto. Also, when I try to download from the App Store, it asks for my Apple ID and Password, I enter it, and then the little spinning color wheel just spins forever, with nothing ever happening. I tried downloading the IPhoto Upgrade but it never actually downloads, HELP!!!

What version of iPhoto do you have installed? Is if one of the versions shown as not compatible in this screenshot?
If it is then go to the App Store and download iPhoto 9.5. It will be free if you have an iPhoto 9 or later verson currently.
OT

Power view couldn't load the model or data source because the data source type is not supported

Hi,
I have SQL 2012 standard edition in my local. I have developed SSAS & deployed in local. I have been asked to develop power view report in excel 2013 using this SSAS. But when I tried to do in Excel 2013 professional Plus, I am getting below error:
Power view couldn't load the model or data source because the data source type is not supported.
Does power view is supported in standard edition of SQL or it requires Business/Enterprise edition of SQL server?
Thanks in advance

What type of SSAS install are you using?
PowerView in Excel 2013 currently only supports Tabular data sources.
Only PowerView in Sharepoint 2013 supports both Tabular and Multi-Dim data sources. (provided you have the required Sharepoint and SQL updates installed)
http://darren.gosbell.com - please mark correct answers

Windows 8 OS is not supporting hp laserjet 1020 drivers

hello sir,
I am using windows 8 operating system but my printer is not supporting and unable to print any thing.
Is there any updates or upgrade facility available? Is there any other drivers for windows8?
can u please give me a suggestion and its urgent for me.
Thank you,

sorry, but this print driver (Laserjet 1020) is not yet supported on Windows 8
If I have helped you solve your issue please mark it as solved .....
(I am an HP employee)

What do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

what do I do with this error? "could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw?"

It can be that you have an old version of Photoshop Elements and a new camera.
Please tell us
Which operating system you are running on
Which version of Photoshop Elements you are using
Which camera the raw images come from (Make & model)
Brian

CS5 RAW Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw. Please visit the Camera Raw help documentation for additional information.

I rented a Nikon D600 & D610 and CS5 cannot open the RAW files, i do not have any issued with my D700 RAW files. I am getting this error message -
Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of Camera Raw.
Please visit the Camera Raw help documentation for additional information.
Can anyone please help?

yellowmledbetter wrote:
Sorry, I am on a MAC. I downloaded the link you provided and it's giving the same error message as above. Running CS5.
The error message you gave is from Camera Raw. I thought you said that DNG Converter didn't work?
The link I gave you is an article on getting your raw files to open in Camera Raw. Did you read it? I lazily gave you the link because this is one of the most common problems in this forum, and I get tired of saying the same thing over and over again. I could break it down for your specific case, but I was hoping you could read through the article and work it out for yourself.
But, here goes:
Your cameras are newer than your raw converter, so it won't understand them.
CS5 comes with Camera Raw 6, which can only be upgraded as far as 6.7.1. You can find out which version of Camera Raw you are running in three ways: in the settings title bar (Cmd-K), in the plug-in title bar (press F to start/stop full-screen mode to reveal the title bar), or Photoshop's Help menu (About Plug-ins).
Downloading raw files from newer Nikon cameras with old versions of Nikon Transfer will actually make them unreadable in Adobe software. They can be fixed with a free utility. Again, it's all in the linked article. You should be using up-to-date Nikon Transfer, or Adobe Photodownloader to avoid this problem.
All being well, you have good raw files on your computer. You can convert them to dng using Adobe DNG Converter. IF you are on OSX Leopard or Snow Leopard, you CAN'T use the latest version, because Adobe stopped support. But, if you ARE on a later OSX, you can download DNG Converter 8.6.
DNG Converter is designed to convert FOLDERS of raw files at a time. You select a folder of raw files, and tell it to create DNG copies. BUT, you have to set up the converter before you start using it...
If you load up DNG Converter, you'll notice a button labelled "Change Preferences". Clicking this, you'll see the first option is "Compatibility". Here, you must select the appropriate setting for the version of Camera Raw you HAVE (see above). If you can't work this out, just pick "Camera Raw 5.4 and later". THEN pick a folder of raw files and convert them to DNGs.
All the above is already in the article, but I gave you a personalised response. If you still can't get it to work, please give us more than one sentence. Tell us exactly what you tried, and describe exactly what happened. Which version of OSX you're running, what device and software you downloaded your raw files with, how you used DNG Converter, and so on.
I really should be in bed.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Do the Mac minis support using AirPlay and all of its functions? I thought I saw a comment yesterday that suggested the Mac mini (particularly the late 2012 models) does not support AirPlay. Thank you.

Hello,
AirPlay Mirroring
Requires a second-generation Apple TV or later. Supports the following Mac models:
iMac (Mid 2011 or newer)
Mac mini (Mid 2011 or newer)
MacBook Air (Mid 2011 or newer)
MacBook Pro (Early 2011 or newer)
http://support.apple.com/kb/HT5444

Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties.

I configured MySQL in TestStand and making a query in TestStand like this:
Command :=> "SELECT * FROM crc_table ; " or "SELECT CRC_Value FROM crc_table ; " returns the total number of records without any errors.
But when I add the "where" clause
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; "
I get the error as:
Error, The following SQL command failed: 'SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= Locals.File_ID and crc_table.Version_ID = Locals.Version_ID and crc_table.Link_ID = Locals.Link_ID; ...' Native error code -2147217887 0x80040e21 Microsoft OLE DB Provider for ODBC Drivers: ODBC driver does not support the requested properties. [Error Code: -10, User-defined error code.]
I tried the same syntax in MySQL Query Browser and got the correct result:
SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID= "FID1" and crc_table.Version_ID = "VID1" and crc_table.Link_ID = "L1";
I would appreciate your help.
Thank you,
Vidula

Vidula,
I am not completely sure if this is the cause of the error but it is something that will cause problems if it is not fixed. In your SQL statement you must properly concatenate your strings with your variables. In the statement you posted you were simply putting the variable names in the string, not actually pulling their values. To do so properly your query should look something like this:
"SELECT crc_table.CRC_Value FROM crc_table where crc_table.File_ID='"+Locals.File_ID+"' and crc_table.Version_ID = '"+ Locals.Version_ID+"' and crc_table.Link_ID = '"+Locals.Link_ID+"' ;"
This way we are using the values of the variables in conjunction with the text strings. In this case the usage of single quotes (') casts the variables as strings so you may need to change this character sequence, but from the second example you gave I think that your variables are of type string so this should work fine.
Message Edited by herosphro on 04-01-2008 03:52 PM
John B.
Applications Engineer
National Instruments

Imac purchased 6/07, when trying to upgrade says model not supported? have plenty of ram and free space? so what is not compatible in the model i have?

i purchased my imac 6/07 ... model 6,1 it has 4 gb ram and plenty of free space, also connected to time machine for backup. currently have latest lion os 10.7.4.
when i went to upgrade i get a model not supported message? what spec or device integral to my model is holding this back? can i get around this or am i just at a brick wall? would like to upgrade if possible? have a 2.33 ghz intel core duo processor, 4 GB 667 Mhz DDR2 SDRAM
anyone know what is going on with apple and this model, wife has last years mac mini and it's upgrade went off without a hitch
thanks !

Apple has tightened its requirements for this OS upgrade, and some older Macs— even ones that qualified for Lion — won't make the cut for Mountain Lion.
The general system requirements are straightforward:
OS X v10.6.8 or later
2GB of memory
8GB of available space
Apple also lists which models support Mountain Lion:
iMac (Mid 2007 or newer)
MacBook (Late 2008 Aluminum, or Early 2009 or newer)
MacBook Pro (Mid/Late 2007 or newer)
Xserve (Early 2009)
MacBook Air (Late 2008 or newer)
Mac mini (Early 2009 or newer)
Mac Pro (Early 2008 or newer)
From what i've read elsewhere, your older model of iMac has a CPU and logic board that partially runs in 32 bit mode at times. Mountain Lion requires that they run Exclusively in pure 64 bit mode. Yours cannot be made to do that.
Hope this helps

Drivers not supported model HP 15-r074TU

Similar Messages

Maybe you are looking for