Drivers picked from winpe pass instead of offlineServicing pass during unattend installation

hi
I am doing an unattend installation and passed different driver locations in Windowspe pass and offlineServicing pass.
I went through the logs and it has processed the windowspe driver location in both the passes.
below is the snippet of answer file:
<settings pass="windowsPE">
 <component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <DriverPaths>
 <PathAndCredentials wcm:action="add" wcm:keyValue="01">
 <Path>z:\script\nbannoth\</Path>
 </PathAndCredentials>
 </DriverPaths>
 </component>
<settings pass="offlineServicing">
 <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <DriverPaths>
 <PathAndCredentials wcm:action="add" wcm:keyValue="01">
 <Path>z:\script\madhmeht\</Path>
 </PathAndCredentials>
 </DriverPaths>
 </component>
 </settings>
this is the part of logs:
2014-01-15 14:34:03, Info PnPIBS: Entering PnP callback to install drivers on WinPE ...
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver paths ...
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver directory C:\$WinPEDriver$.
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver directory X:\$WinPEDriver$.
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver directory Z:\$WinPEDriver$.
2014-01-15 14:34:03, Info PnPIBS: Finished checking for pre-configured driver paths.
2014-01-15 14:34:03, Info PnPIBS: Reading driver paths from unattend.xml ...
2014-01-15 14:34:03, Info PnPIBS: z:\script\nbannoth\ is listed as a driver path in unattend.xml ...
2014-01-15 14:34:03, Info PnPIBS: Finished reading driver paths from unattend.xml.
2014-01-15 14:34:03, Info PnPIBS: Building the list of drivers in the path z:\script\nbannoth\ ...
after few lines :
2014-01-15 14:34:06, Info PnPIBS: Exiting PnP callback to install drivers on WinPE ...
2014-01-15 14:34:06, Info PnPIBS: Entering PnP callback to add drivers to the offline image ...
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver paths ...
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver directory C:\$WinPEDriver$.
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver directory X:\$WinPEDriver$.
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver directory Z:\$WinPEDriver$.
2014-01-15 14:34:06, Info PnPIBS: Finished checking for pre-configured driver paths.
2014-01-15 14:34:06, Info PnPIBS: Reading driver paths from unattend.xml ...
2014-01-15 14:34:06, Info PnPIBS: z:\script\nbannoth\ is listed as a driver path in unattend.xml ...
2014-01-15 14:34:06, Info PnPIBS: Finished reading driver paths from unattend.xml.
2014-01-15 14:34:06, Info PnPIBS: Building the list of drivers in the path z:\script\nbannoth\ ...
here i believe it should have gone for z:\script\madhmeht
please let me know if I am doing anything wrong.
My sole aim is to have drivers in offlineServicing, but somehow its not reading them.
Thanks in advance.

Hi,
The two component work in different configuration pass.
The Microsoft-Windows-PnpCustomizationsWinPE component is used to add one or more out-of-box drivers to a Windows installation. Drivers that are located
in the path specified by DriverPaths are copied to the driver store of the Windows installation during the windowsPE configuration pass.
The Microsoft-Windows-PnpCustomizationsNonWinPE component is used to add one or more out-of-box drivers to a Windows® installation. Drivers located in
the path specified by DriverPaths are copied to the driver store of the Windows installation during the auditSystem configuration pass.
And the log is still showing PE stage.
Microsoft-Windows-PnpCustomizationsWinPE
http://technet.microsoft.com/en-us/library/cc748846(v=WS.10).aspx
Microsoft-Windows-PnpCustomizationsNonWinPE
http://technet.microsoft.com/en-us/library/ff716281.aspx
Hope this helps.

Similar Messages

Price was not picking from the Condition type for Item Category 'P' in PO

Hi Experts,
I Created one condition type based on Material and WBS which price was fixed based on this
I used the Purchase Order having Item Category P or Q Price should pick from the condition type where I mapped the WBS Element and Material.
The Net price was not picking from the Condition type Record. Why? What should be the Problem?
Whether my logic is correct or not?

The Scenario: I want to fix the Material price base on each WBS Element for a Project. For each WBS Element the Price will be various for same material.
Please help on this.
Thanks
Muthukumar

Hi,
In standard configuration you cannot set item delivery date as a pricing data.
Maybe you shoud look at SAP enchancement - in dedicated structures you can pass additional item data (structure KOKMP).
IMG link:
Materials Management -> Purchasing -> Conditions -> Define Price Determination Process -> System Enhancements
hope it helps.
regards,
wojciech

VAT GL is not picking from J_1IT030K_V table for the business place in FB60

Hi,
We have defined the VAT GL based on business place, while posting FB60 (Vendor invoice), system picks the VAT GL from OB40 instead of J_1IT030K_V table....
(While posting MIRO it is correctly picking from J_1IT030K_V table).
Please advsie.
Thanks
SAMEER

HEllo,
Please check if you have any substitution rule to change the value.
REgards,
REnan

Exchange rate should pick from TCURR based on custom date field added in MIGO

Hi,
In MIGO, FI document get posted by picking exchange rate based on the posting date. Through BADI(MB_DOCUMENT_BADI) we have added a field called translation date in MIGO screen, while doing GRN exchange rate should pick from TCURR based on translation date instead of posting date. We have tried this logic using substitution (GGB1) in FI accounting it is working fine in FB60 & F-02 transaction but it is not working with MIGO transaction. Please suggest some solution for this.
Thanks & Regards
Vinoth Kumar.M

Hi Maniraj,
This will a modification to existing system and it is not supported directly.
There are 2 notes of SAP for modification of translation date of BKPF.
SAP Note 574583 will activate a BADI kindly refer to it for details.
http://www.stechno.net/sap-notes.html?view=sapnote&id=574583
There is another one but is appilcable if material ledger is active in the system
Regards

RAID disk not seen from WInPE boot

Dear all,
We have a system with 3ware raid controler card configure as RAID1.
We are trying to build a standard Windows server 2008 image that can be installed in any System, by providing a system dependant unattend.xml file.
As a test first I have generate an unattend.xml file using WAIK. Then I have generate a WinPe boot disk.
When generating the WinPE boot disk, I have follow this procedure in order to add to WinPE boot my Raid controler driver:
http://www.windows-noob.com/forums/index.php?/topic/2349-guide-adding-drivers-to-a-custom-winpe-30/
The problem I have when booting from WinPe and listing volumes from DISKPART is that I cannot see my Disk mounted as RAID 1.
Any idea what can be wrong ?
regards
serge
Your knowledge is enhanced by that of others.

Hi Serge,
Can you please post how did you resolve the issue? I am having similar issue here & I am unable to see the Disk Drives in WinPE 3.0. I have 2 3TB Hard Disk Drives connected & it needs Intel RAID drivers to load to see the drives in DISKPART "List
Disk" command. I used drvload.exe & it shows success but actually it didn't load the drivers & I am unable to see the drives.
But interestingly I am able to load the RAID drivers manually in Windows 7 Setup screen.
Please help me to load the drivers in WinPE.
Thanks,
Sourav D Gupta
Born to Learn

How to provide the user with a list of files to pick from...for downloading

hai..
I have uploaded the file succesfully.. now we need to download the file...... which has been uploaded..... for that we have implemnted the Query as..
select max(id) from APEX_APPLICATION_FILES ,here the latest uploaded record will be retrieved and shown.
Now We want to provide the user with a list of files to pick from for downloading..,Dat is he should be shown the list of files which is available from dat he has to select one file to downlaod ???
can u plz tell me how to do it....
anoo

Hi Anoo,
Create a report using the following SQL statement:
SELECT ID,
FILENAME,
CREATED_ON
FROM APEX_APPLICATION_FILES
ORDER BY CREATED_ON DESCThere are other fields available from the table, but the above gives you a start.
Then edit the report's Report Attributes.
Edit the CREATED_ON column and pick a Number/Date Format to use for the display and Apply Changes
Edit the ID column. In the Column Link section, enter:
Link Text: <img src="#IMAGE_PREFIX#download.gif" alt="Download">
Target: URL
URL: p?n=#ID#
Apply Changes and run your report
Andy

From Database pass in Provisioning job

Hello SDN,
I'm trying in a provisioning job to get some data from the database and then sending it back onto the database, here i found the 'from database' pass satisfying.
The problem is i'm getting this wired error: "Fromsource ODBC is a illegal type for provisioning!" when i have set it all up and trys to run it.
I have been reading in the help files and found that ODBC only is used when the runtime engine is Windows but mine is running on a Java runtime engine. the link i uses for the connection is the global constant %$ddm.identitycenter% and i uses it several places outside the provisioning jobs in 'from database' pass.
I have then been reading further in the help files and found this quote: 'A task always operates on one given entry in the identity store. This is why there is no source defined in the pass of the job in an action task.' is this why i can't connect up to the database?
Some one having any idea?
Best Regards
Jesper Lindstrøm Nielsen

Jesper,
You can not use FromPass into Provisioning Job.
To do so, Create an Administration Job with to pass :
1- FromDatabase (....) to read date from your source
2- ToDatabase (....) to send it back with needed transformation
This job can be run manualy (using runnow) or scheduled, but can as well be call from a provisioning job. To do so;
Create a Provision Job with ToGeneric pass,
Into the ToGeneric pass, write a javascript function with :
OutString = uRunJobNow(<Job ID of the administration job previously defined>)
Benjamin

Can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

can you have multiple Apple TV's in the same house and network? If so how do you know which one to pick from your Idevice?

Yes, there are even defaults for naming them, such as LivingRoom, Bedroom, etc, or you can even enter your own name with the remote for each AppleTV.

Net price not picking from info record

I am creating a new PO, but net price is not picking from info record. Info record is getting copied in the line item for PO, but net price is not copied. Due to that I am unable to create PO. If I manually enter price PO can be created. Could someone tell me what might be the reason Price is not automatically taken from Info Record. Please guide me what all I need to check.
The same data is working in one cleint, and in another client this data is facing problem.
Thanks
Vineeth

Hi
1) If there is condition record exit in system,then while creating po system will take condition record
2) If In inforecord last po number is exist for material and vendor ,then system will take this into consideration
3) if your creating po first time for material and vendor ,and we have maintain purchasing inforecord for purchasing organization and for plant,then system will take it into consideration
40 If none is available we have to put condition manually in po
Regards
Kailas ugale

Picking from interim area for outbound delivery

Hi experts,
When we receive goods from production to our interim area (901), we sometimes want to pick the goods from here for the delivery, The system is allowing us to pick form 901 ,but the TR is still open ,Is there a way of picking for Delivery from 901.,
For example I received 100 pcs from production.I have a customer order for 40.
We want to pick 40 from 901 and put the rest(60) into Bin.
Is there a way to deal with this?any help is appreciated.
Thanks
Chris.

Hi,
For your requirement, you need to keep the interim storage types in the Storage Type sequence in the configuration. Then only, system will allow you to Pick from the Interim Storage bins.
This problem occurs only when you are not following the system standard sequence to Pick the product from the different storage types.
As long as you maintain the WM and IM stocks correctly, you won't face any problem, otherwise it leads to lot of inconsistencies like you will see lot of negative stocks in Interim Storage Bins.
With the above situation, you will be able to issue the product even if you won't have the stock physically in the Warehouse.
Hope it helps you.
Aktar

Price is not Picking from Contract while making PO

Hi Gurus,
Value Contract for services is created, While making the Purchase Order the price is not picking.
Note:-The Contract is in Valid Period only.
Can any one tell me what reasons may be there.
Regards,
Prabhakaran M

As a std procedure while creating PO price won't be picked from contract. Rather you need to create a PO w.r.t the contract. In that case PO will take the same conditions stored in the contract.
Else if you are working with sourcelist, then you need to define the contract as a source of supply. In this case when you create PO system will pick Contract as source and contract price will appear in PO.

PO price is not picking from Inforecord

Hello All,
When PO is created by one particular user the price is not picked from inforecord. Inforecord validity periods are active and this price is not of previous purchase order. The problem is only for this user. Can you please advice what needs to be done here.
Thanks a lot in advance.
Best regards,
Raji

Hi,
1. Check out user profile whether EVO parameter is maintained properly for all the users.
2. Check in EVO parameter key you set radio button on Always copy.
EVO is parameter ID for Defining Defualt values for buyer. Relevent customization carried out in SPRO --> Mat mangt --> Pur --> Env data --> define default value for buyer.
Rewards, if helpful to you.
rgds,
rajesh

How to install Linux from a distro instead of booting a live cd?

Suppose you have Arch Linux installed in sda and you want to install a new copy in sdc, can you do it from your distro instead of booting with the installation cd?
Here's my sdc (75 GB):
/dev/sdc1 ntfs 100 MB
/dev/sdc2 ntfs 40 GB
those partitions are used by Windows 7, so there's another 35 GB for Linux.
Now here's the the problem: this latest Arch Linux install media is kinda complicated because it does not provide the AIF anymore. Also, the installation method differs a little from the old ones. Until 2011.08.19 I would partition the remaining space like this:
/dev/sdc3 extended 35 GB
/dev/sdc5 ext2 100 MB /boot
/dev/sdc6 swap 1 GB swap
/dev/sdc7 ext4 15 GB /
/dev/sdc8 ext4 19 GB /home
However this guide http://ebalaskas.gr/wiki/archlinux/netinstall shows a different (suposedly recommended) partition table for the new method.
So,
1) Is it possible to install Arch Linux from an already installed distro, including GRUB2?
2) Is it possible to use the partiton table style I provided?
And how to do it of course.
Thanks!

Check this article out
https://wiki.archlinux.org/index.php/In … ting_Linux
Note that it says it is out of date because of pacman. Really all you need to know is that pacman uses signed packages now, so it is now necessary to run the pacman-key stuff. Or set SigLevel = Never in pacman.conf
Edit: IMHO the first method is preferred because it more closely resembles a regular install. Ergo, you will be able to semi follow the beginners guide for config and such.
Last edited by WonderWoofy (2012-08-17 03:42:12)

[SOLVED] Enabling debug for ath9k in compat-drivers-patched from AUR

Wireless card: TP-LINK TL-WN951N. lspci says that it is an Atheros AR5416 adapter [AR5008].
Some background: I'm having the same issues as the OP in this thread, which references this bug report. The problem is that I get a 2000 ms ping every 30 seconds. So 2 seconds of inactivity every 30 seconds. I have the same wireless PCI card, as well. I need to fix this, because it's making online gaming impossible. I should also note that the card is working just fine in Windows 8, however. I am using net-auto-wireless. I have tried using wicd, enabling ath9k's nohwcrypt option, toggling the card's power save, installing the latest compat-drivers-patched from the AUR, toggling different settings in my motherboard's BIOS, and removing the antennae from the card. But nothing has made a significant difference.
I think I'm really close now. I just have to disable ANI. But in order to do that, it seems that I need to enable debugging for ath9k. But this means that I need to either recompile a custom kernel, or somehow enable debug for ath9k in compat-drivers-patched from the AUR. I'd prefer the latter, as that means that I will have a more bleeding-edge driver. That, and I won't have to touch the kernel as much. What I want is described on this page. But it seems too complicated to me. Please let me explain.
I've installed things from the AUR before, as mentioned above, and have properly configured my makepkg.conf for my system. So I'd like to use the CFLAGS and such that I've set. I don't understand how everything works in the PKGBUILD; I don't have much experience with sed and awk and regular expressions, and haven't done much shell scripting at all. It seems that at some point in the PKGBUILD, I need to enable debugging for ath9k before it is compiled. Apparently on the last page I linked to, I need to add:
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
to some config.mk file. I can only get access to the config.mk file after I install the package with pacman. I've tried adding those lines to my /etc/profile file, and checked, after a reboot, with "set", that those variables are indeed set. But the thing is, with these variables set in /etc/profile, when I run makepkg, makepkg fails with an error 2. I tried again and got the same error. I removed those lines from my /etc/profile, rebooted, tried makepkg again, and everything worked. So putting those lines in my /etc/profile is not the solution, and I feel like I'm doing something very stupid. What am I doing wrong?
I should also note that I've tried to read the wiki page on compiling a custom kernel using ABS, but it seems to just say "get your custom configuration files" and then just continue (so it assumes that I should already be familiar with the configuration part). The PKGBUILD and Creating Packages wiki pages also seem to be a little... too advanced for me at this point in time.
So how do I enable debugging for ath9k in compat-drivers-patched from the AUR? I'd prefer to stick with only editing the PKGBUILD and using makepkg, if possible.
I've really tried to search the web and the arch forums on how to fix this problem myself, but alas, it seems that I need help this time. I greatly appreciate your time for reading my long post.
UPDATE:
I've made a lot of progress. I ended up removing the AUR package with pacman by invoking "pacman -Rsn compat-drivers-patched".
Instructions for [almost] success: First, download compat-drivers-patched from AUR. Then move it to the "builds" directory (or "local", if using ABS). Extract the tarball. After the new directory is created, cd into it. Now here's the important part: run
$ makepkg -so
Then cd into src, cd into the directory inside src, then edit the config.mk file. Make sure these lines are uncommented (or created, if not already there):
export CONFIG_CFG80211_DEBUGFS=y
export CONFIG_MAC80211_DEBUGFS=y
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
(source)
Now run "cd ../.." to go back up two directories. Now run:
$ makepkg -e
# pacman -U <file that was produced>
And I ran "mkinitcpio -p linux" just in case, but I'm not sure if that is necessary at all. I'm... not touching the kernel, right?
Now I ran:
echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani
But bash would say that the file or directory doesn't exist. Even if I prepend it with "sudo", I get the same results. I was only able to get the command to work if I logged in as root. I even put the line in my /etc/profile. The 2000 ms ping every 30 seconds is now GONE. HOWEVER! If I reboot and log in as a normal user, the problem is there again. If I reboot and log in as root, the problem is gone. If I then log out and then log back in as a normal user, the problem does not come back.
So really, I can avoid the problem if I first log in as root, log out, and then log back in as a normal user. But this is a great inconvenience. I would much prefer if I could just log in as a normal user right after boot, and have everything working.
Now, how do I get the command to automatically run at boot as root (without me having to log in as root), and work?
UPDATE 2:
I got it working. Putting the line in /etc/profile is not the solution. I created a custom systemd .service file.
Put this into /etc/systemd/service (name it "disable_ani.service"):
EDIT: Wow. I made a glaring typo here. It should be /etc/systemd/system/disable_ani.service
[Unit]
Description=disable_ani
[Service]
Type=oneshot
ExecStart=/bin/sh -c "echo 1 > /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani"
[Install]
WantedBy=multi-user.target
Then make sure to "sudo chmod 755 /etc/systemd/service/disable_ani.service", since root owns this file.
Then run "sudo systemctl enable disable_ani.service".
EDIT: It has been brought to my attention that there is a much simpler way than creating a custom service.
Using a tmpfile:
/etc/tmpfiles.d/disable_ani.conf
w /sys/kernel/debug/ieee80211/phy0/ath9k/disable_ani - - - - 1
Done.
Now ANI is persistently disabled between boots, even if I log in as a normal user right after boot.
Thanks for reading.
Last edited by vyu223 (2013-03-12 10:20:19)

So zsh is telling you that the command didn't work, since it claims that there is no such file or directory. I had a lot of trouble with getting the echo command to work, as well. I found that if out of these lines:
export CONFIG_CFG80211_DEBUGFS=y
export CONFIG_MAC80211_DEBUGFS=y
export CONFIG_ATH_DEBUG=y
export CONFIG_ATH9K_DEBUG=y
export CONFIG_ATH9K_DEBUGFS=y
If the first and second line above were not uncommented in the config.mk file, I couldn't leave the last line above uncommented as well, or else makepkg would fail and give me an error. So originally I had only the 3rd and 4th lines above uncommented/inserted in my config.mk. With that configuration, I could not get the echo command to work, no matter what. Have you uncommented or inserted all of the above 5 lines into your config.mk?
After making sure all of the above 5 lines were in my config.mk, the echo command still didn't work, even if I preceded the command with sudo, or entered a su session. Bash would tell me that there was no such file or directory. I found that if I actually logged out of my normal user, and then logged back into the computer as root, the command would work. If your shell does not give you any feedback (particularly, "no such file or directory"), then the command worked. In order to get the command to run every time the computer boots, I used a systemd service, so that the command is issued as root. For some reason, it doesn't work if you put the command into /etc/profile.
Oh, and it would probably be helpful to mention that for the compat-drivers-patched package from the AUR, the PKGBUILD checks to see what your _selected_drivers variable is before compilation. If you set _selected_drivers=ath9k, your compile times will be much shorter.

Audio only works from my MacBook instead of TV.

When I try to stream a video, the visual works fine but the audio comes from my MacBook instead of the TV. When I went to Sound Settings, the Apple TV showed up as an option for sound output but would go back to computer every time I clicked Apple Tv.
This happens randomly. I'll use the Apple TV to stream a video from the same website and some days it'll work perfectly and other days it won't.

Hi,
I understand that you are in Airplay?   I had the same problem since my AppleTV updated today.
I restarted the airplay setting in the apple TV :   Settings / Airplay.   Deactivate Airplay.
You will loose the airplay icon in the upper right menu of your Mac.
Reactivate Airplay on the Apple TV and reconnect your Mac.
Solved the problem for me.   I hope it will help you too.   Sorry if the terms are not the right one, my AppleTV is not in English...

Drivers picked from winpe pass instead of offlineServicing pass during unattend installation

Similar Messages

Maybe you are looking for