Drivers to access trackpad functionality, camera,...in Win7 installed using Bootcamp?

I had win7 installed on my macbook pro via VMFusion and all worked great. I wanted full access to all of the RAM for my CADD applications and deleteed all that and reinstalled win7 via bootcamp.
Now the trackpad functionality, camera,....other items from the apple side do not work when using win7.
Where do I go to get the drivers or whatever I need to get full functionality of all the hardware?
THX,
MK

OK,
I opened bootcamp assistant and chose to 'download the latest windows support software from apple' and then tried both options of 'burn to dvd' and save to ext. drive', but when I click continue I get the message, "Can't install Windows Support Software because you are not connected to the inteernet".
I am on the inteernet. I click on diagnostics and it says all is ok. I even plugged in via ethernet and that did not help. I have full access to the internet elsewhere...???
I check my bootcamp version...it is 4.0.1 (429), I think that is the latest version.
I had this problem when I first tried to install win7, but that was months ago, I can't remember how I got past it.

Similar Messages

Can you access scan function of a multifunction printer using Bonjour/expre

I'm using a Canon Pixma 830. It prints fine through airport express. I've hooked up the printer to the airport express using a usb cable.
The question is. Can I use the other functions of the scanner using the bonjour/Express set up? I doesn't seem to work. I'm using a macbook so not hooking up the usb directly to the computer would be helpful. Thanks.

Theoretically almost anything is possible...
(a) The first thing you have to have is the proper hardware support. Only Apple knows if the AEBS's USB port has capabilities to access a scanner. If the hardware doesn't support it, end of story.
(b) (1) You would need to create AEBS firmware that tapped into the AEBS hardware for scanning. (2) This firmware would need to provide a network interface for clients to use to access the scanning capability. (3) The Mac applications would need to be modified to know how to get a scan over a network connection instead of a local scanner.
I have a suspicion that a USB printer interface has been standardized to some degree while the USB scanner interface has very little standardization.

MacbookPro 5,4 - Failure(s) installing Win7 x64 using Bootcamp (aka help!)

I'm running a Macbook Pro 5,4 and am having a hard time figuring out why Win7 x64 keeps failing during the install process. I'll start with the failures, then add what I've attempted to fix the problem.
Following the Bootcamp guide exactly, I get through the initial copying, expanding and updating process just fine. The system reboots but never makes it into windows. Instead I get the, "Windows failed to start. A recent hardware or software change might be the cause." Sometimes it lists a driver (the list is long and seemingly random). Sometimes it lists the kernel (ntoskrnl.exe).
My attempts at a solution:
1. The recommendation from MS is to boot to the install disk and run a start-up repair. When I do this, it returns the message, "Startup Repair cannot repair this computer automatically". Dead End.
2. Because it looks like a possible corruption issue I first tried the cheap route of installing from another disk - in fact I've borrowed two other Win7 Pro x64 disks (all 3 disks I've used are legitimate) and have had the same problem, so I'm ruling out the media.
3. The system is less than two months old but it could still be the HDD so I ran a check in OS X and it finds no problems. I've replaced the drive twice and the problems with installation remain consistent.
I've run a check on the memory as well - again, no problems detected.
So far I've completed 9 attempts, with fresh partitioning and formatting and have yet to successfully install Windows 7 on this system. In contrast, it was a simple process to install the 32 bit version on my wifes MacBook Air. Am I missing something obvious?

Found a workaround, to sum it up, it's pretty much my dead internal superdrive (as for unbootable USB, that's still a mistery). What I did was moving the HDD to my 2012 MBP and install from there. The problem is now that since I installed it on another machine (with ofc all different hardwares) I got blue screen whenever I tried to start Windows7 (in 2007 MBP after moving the HDD back there).
Next step will be replacing the superdrive on 2007 MBP with 2012's. Or if someone got a suggestion like installing the drivers via target disk mode etc, please advice

Unable to access the internet on windows xp using bootcamp. I installed the bootcamp drivers ( from snow leopard) but it still doesn't work. I have parallels 6 also installed and IT works fine. I am missing a rtl network adapter-thanksr

Hi
I have a new 21 inch imac oct 2011 version. I installed bootcamp and windows xp on my machine and i also installed parallels 6.
Paralleles works great and i can open any program with it. But bootcamp also works EXCEPT it refuses to give me access to the internet. I installed the bootcamp drivers from my snow leopard disk, it did not make a difference. All the drivers installed but still no internet. I then installed the bootcamp drivers from the gray mac osx disk (#1) but it stopped installing with an error number ( 2753) and it said that the package was damaged.
I have tried everything; i opened each disk and trieed installing the files separately. Nothing.
What i see missing in my devices screen in XP is the network adapter.
I have a router (dlink-dr615) and it is connected by ethernet to my imac. I wonder if THIS might have anything to do with the problem. Any guidance would be much appreciated.
Thank you

I'd recommend reposting in the Boot Camp forum, that is where the Boot Camp and Windows gurus hang out.
Good luck.

I can access a function in a package using OCI drivers but not PDO drivers

Hello all, i am a newbie to Oracle and its drivers for PHP. I would like to use PDO, and I have my database activity in packages, which have procedures and functions. My package has overloaded functions and that has been giving me a tough time with these drivers. So one signature of my function get_data contains a four arguments and all four are numbers, while another signature of get_data has the first two as numbers and the next two as varchar2. So when I try to access this function which is part of a package, I am able to retrieve data, and the driver I am using is OCI8, but when I try to do the same with PDO, it does not work. It gives me this error,
*General error: 6553 OCIStmtExecute: ORA-06553: PLS-307: too many declarations of 'GET_DATA' match this call (/var/www/php-5.3.3/ext/pdo_oci/oci_statement.c:146)' in /var/www/pdo_check.php:251 Stack trace: #0 /var/www/pdo_check.php(251): PDOStatement->execute() #1 /var/www/pdo_check.php(345): dbPDO->execPackage2() #2 {main} thrown in /var/www/pdo_check.php on line 251 *
I got this error earlier with OCI drivers, then I added the datatype while binding the values.
Has anybody had this headache earlier??
##Works
*$qu = oci_parse($connect, 'select pack.get_data(:p1,:p2,:p3,:p4)as rc from dual');
$p1 = (int)121;
$p2 = (int)222;
$p3 = (int)324;
$p4 = (int)001;
oci_bind_by_name($qu,":p1",$p1,10,OCI_B_INT);
oci_bind_by_name($qu,":p2",$p2,10,OCI_B_INT);
oci_bind_by_name($qu,":p3",$p3,10,OCI_B_INT);
oci_bind_by_name($qu,":p4",$p4,10,OCI_B_INT);
oci_execute($qu) or die("did not execute");
$r = oci_fetch_array($qu);*
##Does not work
*$sql = 'select pack.get_data(:p1,:p2,:p3,:p4) from dual';
$result = $this->dbConnect->prepare($sql);
$p1 = (int)2;
$p2 = (int)2;
$p3 = (int)2;
$p4 = (int)6;
$result->bindParam(':p1', $p1, PDO::PARAM_INT);
$result->bindParam(':p2', $p2, PDO::PARAM_INT);
$result->bindParam(':p3', $p3, PDO::PARAM_INT);
$result->bindParam(':p4', $p4, PDO::PARAM_INT);
$result->execute();*
I am still perplexed why is PDO giving me an error, when I have virtually mentioned everything is asks for?

I think the only person who can really answer this question is Chris Jones. For my money I tend to steer clear of PDO as it is a bit quirky ( at least in my experience ) and it does not support reference cursors.

HT4410 I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7

Dear Apple. I have just installed Windows 7 64-bit full version Home Premium using Bootcamp and cannot get access to the internet. I installed on a Macbook Air Mid 2012 with Mountain Lion. Are there some drivers that are missing from the Windows 7 bootcamp install download from Apple

It is a Total Misconception that the Support files are installed when you are installing Windows, even if the USB drive that holds them is inserted in the system when doing the Windows install.
You must always Run the Setup.exe files from the support files or run the drivers individually once Windows has finished installing and booted to the desktop.
Also you really need to run the Boot Camp Control Panel Applet and check for updates as not all the newest drivers for full function of all the hardware is included with the original support download. That download is basically a generic version to get the system working and without doing the updates not everything will work properly.

RE: I need drivers for an external isight camera on windows 7 64-bit

IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!

witkewoo wrote:
IRT http://discussions.info.apple.com/message.jspa?messageID=11515278#11515278
Are the drivers from boot camp only for the internal isight camera or should the drivers work with the external firewire camera?
I installed the drivers without a problem on Windows 7 64-bit. However, windows 7 didn't recognize the drivers (either automatically or when manually found). The installer placed them in C:\Windows\System32\DriverStore\FileRepository\
Of note, the camera does work. Using skype, the camera's LED lit up. However, the generic driver wouldn't allow the camera to "talk" with windows. The aperture opened to the max setting and "whited out" the video. Thanks!!
(1) External iSight is, as you recognize, a Firewire webcam. It has its own built-in microphone.
Built-in iSight is a USB camera. It has no mic of its own.
Windows® video drivers for both iSights are included. However, as explained in the following link, there are no Windows® audio drivers for external (Firewire) iSight’s internal microphones:
http://en.wikipedia.org/wiki/ISight#iSightonWindows
(2) If you can track your problems to your Boot Camp or Windows installation, see FAQs and troubleshooting here:
http://www.apple.com/support/bootcamp/
As reported by user mikkel_nielsen here:
http://discussions.apple.com/message.jspa?messageID=11953256#11953256
you may merely need to update and reinstall the drivers.
I do not use Windows®, but if you get no better help here, the best I have to offer is:
Check iSight with OS X apps and user accounts: http://support.apple.com/kb/HT2090
If all works there, consider Boot Camp/Win7 FAQ & links: http://support.apple.com/kb/HT3986
Also Boot Camp 3.0, Mac OS X 10.6 FAQ & links: http://support.apple.com/kb/HT3777
If all else fails, this search in Boot Camp might give you some ideas or an idea for a new topic there:
http://tinyurl.com/39lu9fn
Message was edited by: EZ Jim
Mac Pro Quad Core (Early 2009) 2.93Ghz w/Mac OS X (10.6.4) MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
LED Cinema Display G4 PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

Error - Creating a Web Dynpro Application Accessing ABAP Functions

Dear All,
we are trying to implement a web dynpro application with accessing ABAP functions.
Previous tasks:
-     insert the ABAP system into the SLD from the NWDI System (Transaction RZ70; the ABAP system is correctly insert into the SLD => technical systems)
-     equipped the JCO connections with the web dynpro content manager (ping and test = OK)
Its the standard tutorial out of the SDN called Creating a Web Dynpro Application Accessing ABAP Functions.
Some hints:
-     There are no errors after the implementation and the rebuild of the project in the NWDS
-     The auto deployment works fine to the development runtime system. The application is shown in the Web Dynpro content manager
-     The In the build log I found these entries:
System.err] [Invoked from com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:585)]
[System.err] java.net.UnknownHostException: FRASAPP562: FRASAPP562
[System.err]      at java.net.InetAddress.getLocalHost(InetAddress.java:1191)
[System.err]      at com.sap.s2x.tools.GUID.getnodeaddress(GUID.java:575)
[System.err]      at com.sap.s2x.tools.GUID.<clinit>(GUID.java:179)
[System.err]      at com.sap.s2x.tools.S2XGUID.getGUID(S2XGUID.java:19)
[System.err]      at com.sap.ide.metamodel.core.i18n.LanguageState.createS2XID(LanguageState.java:191)
[System.err]      at com.sap.ide.metamodel.core.i18n.S2XLanguageUnmarshaller.unmarshal(S2XLanguageUnmarshaller.java:52)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.loadLanguageState(TextPoolProxy.java:703)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.prepareLanguageForRead(TextPoolProxy.java:646)
[System.err]      at com.sap.ide.metamodel.core.i18n.TextPoolProxy.isEmpty(TextPoolProxy.java:222)
[System.err]      at com.sap.ide.webdynpro.checklayer.MDOChecker.check(MDOChecker.java:23)
[System.err]      at com.sap.ide.webdynpro.checklayer.view.ViewChecker.check(ViewChecker.java:52)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ViewControllerChecker.check(ViewControllerChecker.java:96)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:119)
[System.err]      at com.sap.ide.webdynpro.checklayer.controller.ControllerChecker.check(ControllerChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:181)
[System.err]      at com.sap.ide.webdynpro.checklayer.component.ComponentChecker.check(ComponentChecker.java:56)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2039)
[System.err]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1296)
[System.err]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
[System.err]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
[System.err]      at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:275)
[System.err]      at org.apache.tools.ant.Task.perform(Task.java:364)
[System.err]      at org.apache.tools.ant.Target.execute(Target.java:341)
[System.err]      at org.apache.tools.ant.Target.performTasks(Target.java:369)
[System.err]      at org.apache.tools.ant.Project.executeTarget(Project.java:1214)
[System.err]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:112)
[System.err]      at com.sap.tc.buildplugin.DefaultAntBuildAction.execute(DefaultAntBuildAction.java:61)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.handleBuildStepSequence(DefaultPlugin.java:213)
[System.err]      at com.sap.tc.buildplugin.DefaultPlugin.performBuild(DefaultPlugin.java:190)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate$BuildRequestHandler.handle(DefaultPluginV3Delegate.java:66)
[System.err]      at com.sap.tc.buildplugin.DefaultPluginV3Delegate.requestV3(DefaultPluginV3Delegate.java:48)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
[System.err]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
[System.err]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
[System.err]      at java.lang.reflect.Method.invoke(Method.java:324)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.maybeInvoke(PluginHandler2.java:350)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.request(PluginHandler2.java:102)
[System.err]      at com.sap.tc.buildtool.v2.impl.PluginHandler2.build(PluginHandler2.java:76)
[System.err]      at com.sap.tc.buildtool.PluginHandler2Wrapper.execute(PluginHandler2Wrapper.java:58)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1723)
[System.err]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1495)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
[System.err]      at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
-     Im able to start the application out of the Web Dynpro content manager with run => only the user interface is displayed without any functionality
-     The normal start over the NWDS fails => error text
com.sap.tc.webdynpro.services.sal.core.DispatcherException: The requested deployable object 'local/J08_Flugdat_Daventdcflight~xxx.com' and application 'FlightListApp' are not deployed on the server. Please check the used URL for typos.
There two different URLs in use.
Start via NWDS:
http://frasapp562:50000/webdynpro/dispatcher/J08_Flugdat_Daventdcflight~xxx.com/FlightListApp
Start via web dynpro content manager:
http://frasapp562:50000/webdynpro/dispatcher/xxx.com/aventdc~flight/FlightListApp
For test purposes, we started the BAPI (BAPI_Flight_Getlist) on the ABAP system directly. It works.
Any ideas about the system behaviours (different URLs and missing functionality)?
Thanks a lot in advanced!
Best regards
Christoph

The Error has been solved The implementation of a method was missing....
Thx
Christoph

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

I have loaded Lion on my MacBook and the new trackpad functions work only on one ordinary account or user and not on the admin account. The trackpad preferences are well set. What can I do?

iCloud should still help you reduce some hard drive space. Just select "optimize" in the icloud tab in Mac Photo App preferences.
Granted, not the same as completely offloading your library to a back-up drive at your location.
Good Luck!

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
Clinton

Accessing ABAP Functions in Web Dynpro

Hi all,
for testing reasons I would like to implement a simple Web Dynpro Application which access APAP functions (or BAPIs) on a remote SAP backend system. The problem is that I dont have a SAP backend system
There is a tutorial :
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/355b9c90-0201-0010-d2a8-89fece426526">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/uuid/355b9c90-0201-0010-d2a8-89fece426526</a>
which states some prerequisites.
My question:
Is it possible to comply to all these prerequisites by installing NetWeaver Preview and minisap as remote SAP backend system ? Where can I get minisap ?
I'm quite new to SAP so I'm al little unsure which part belongs where.
Maybe someone can give me a hint.
Thanx a lot

Hi Oliver,
here you can download all you need:
https://www.sdn.sap.com/irj/sdn/downloaditem?rid=/library/uuid/cfc19866-0401-0010-35b2-dc8158247fb6
Note: read the column comment in the page to understand what you need (java or abap stack).
Hope this help you,
Vito

Accessing ABAP Functions in Web Dynpro Java

Hi,
I am trynig to do "Accessing ABAP Functions in Web Dynpro Java" this application, (which is the example application which i got from www.sdn.sap.com) but everything is fine no error also while dyploying.
But it is not dysplaying the first page after i run the application i am getting plain web page ,without any content.
Can any body help me.
Regards,
H.V.Swathi

k.. now iam getting some error on page.
I have embeded the two view in to window.
But now after running the application i am getting connection error
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=jktr3 GROUP=SPACE R3NAME=R32 MSSERV=sapmsR32 PCS=1 ERROR Group SPACE not found TIME Fri Sep 26 15:05:59 2008 RELEASE 700 COMPONENT LG VERSION 5 RC -6 MODULE lgxx.c LINE 4288 DETAIL LgIGroupX COUNTER 1
    at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:457)
    at com.sap.mw.jco.MiddlewareJRfc$Client.connect(MiddlewareJRfc.java:989)
    at com.sap.mw.jco.JCO$Client.connect(JCO.java:3193)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:90)
    at com.sap.dictionary.runtime.mdi.DataProvider.<init>(DataProvider.java:122)
    ... 61 more
Rgards,
H.V.Swathi

Web Dynpro Application Accessing ABAP Functions

I wrote the example application for Web Dynpro Application Accessing ABAP Functions, as described in the tutorials for NWDS. But when I run, it only show me a blank blue page nothing else, how to fix this issue?
Thanks,
Jawed Ali

Hi Jawed,
Again, I'll insist you to please check if your view is embeded in the Window.
write some output message in the view to ensure that not only gui's, even the messages in the view are not coming.
if there is another issue, Please share with us.
Thank & Regards,
Namrta Mahajan

Creating a Web Dynpro Application Accessing ABAP Functions

Hi all,
I implemented Creating a Web Dynpro Application Accessing ABAP Functions .But recently i heared a new word BW query.Is it not wat i did in the above application or is this a new backend sytem , does it have a new procedure to create model for BW Query in webdynpro rather than what i did in the above app
Regards
Padma N

The Error has been solved The implementation of a method was missing....
Thx
Christoph

Accessing the functions in C

Hai,
I am new to JNI world. I want to access the functions that are written in C using JNI, can any one of you tell me some references to the sample code. Also is it necessary to convert the data types that are used in the C functions with the JNI data type ? Thanks in advance,
Bala

see my post to the previous thread about accessing the wndows registry.

Drivers to access trackpad functionality, camera,...in Win7 installed using Bootcamp?

Similar Messages

Maybe you are looking for