Drivers trouble in new installed windows 8.1

hi,
I have a problem with toshiba c55-b5362 ,
the original windows of this laptop was windows 8.1, but there were some problems with installing softwars like autocad, ... even playing videos, so my brother installed windows 7, (without following instructions or anything) and in windows 7 , nothing worked properly, so we installed windows 8.1 again! now problems are there, i downloaded the Intel Chipset SW Installation Utility, intel wireless, intel proset, ... just to be enable to connect to internet through wifi, but no success! after trying to install drivers that is the error that we see on the screen!

Satellite C55-B5362
Downloads here.
in windows 7 , nothing worked properly
There appear to be plenty of drivers and utilities to support 64-bit Windows 7 at the download site above. You will need essentially all of them for the laptop to perform as designed.
The installation order matters. Be sure to install the Intel chipset driver followed by the Intel display driver prior to any other driver. Install the TVAP before any other Toshiba utility.
-Jerry

Similar Messages

Transferring drivers over to new install

Hi!
I'm a recent switcher (5 months), and since I've moved to OS X, I've installed, and subsequently uninstalled, untold piles of crap. Therefore I've decided that together with the external enclosure I'm getting for one of my hard drives, I'm going to do a fresh install.
However, my printer isn't supported my OS X. To get it to work, I had to install Xcode and use the Terminal to run some sort of Linux driver.
Because I plan on keeping my new install as lean and clean as possible, I'd like to avoid all the tedious mucking about in Xcode and simply copy the driver over. Is this possible?
The printer in question is a Minolta 1350W, and it's using the 13xx linux drivers.
Thanks
hudgie

Do you know where (all) the file(s)
are?
> That's what I want to know. Where are drivers kept?
And is it possible to just transfer one from one
machine to another?
You really have to look at the source code package to determine where files will be installed when you do your own compiling. The usual install directories are /usr or /usr/local. It should be noted that you may have changed the default location when you built the driver.
I took a short look at the source code. Running a "./configure --help" includes the following --By default, `make install' will install all the files in`/usr/local/bin', `/usr/local/lib' etc. You can specify an installation prefix other than `/usr/local' using `--prefix', for instance `--prefix=$HOME'.After a quick "./configure" and "make" followed by a "make -n install", it appears that files were installed in /usr/local/bin and /usr/local/man/man1. I didn't do a full make install and check for all the files that would be installed and I may have missed other files that were installed somewhere in the /usr/local tree. There may well have been more than one file placed in each of the directories such as /usr/local and /usr/local/lib.
It does not appear that a PPD was generated during the build. I am assuming you used the PPD from the linuxprinting.org site. That PPD will be whereever you manually placed it.
To be sure you get all the files installed, it would indeed seem easier to install XCode and rebuild the package. XCode has a convenient uninstaller in /Developer/Tools. I think you will actually spend less time going this route than searching all over the indicated directories trying to determine which files you need to transfer.
Matt
Mac Mini G4; B&W G3/300

Trouble trying to install windows to play games

i was trying to install windows thru the mac windows installer...but i dont have windows on a disc and its stuck on a black screen that says " no bootable device--insert boot disk and press any key" so not have the disc what do i do to go back or cancle?

i had the same problem with mine, i tryed several windows disk's with diffrent versions of windows (from xp to windows 7) but with all i had the same problem. A friend lend me a original disk & it worked perfectly. i suggest you do this or try many diffrent windows disks because after a few weeks i tryed to install windows on a friends mac & the disk that didnt work for me, did for him.
weird, i mean... its Microsoft were talking abaut after all!

Y410 new install Windows 7 64-bit -- 3 drivers "missing"

Two are "base system device" and one is "unknown device." Not sure what's NOT working, except for one thing so far: speakers (and headphone jack) have no sound even tho the volume sys tray app shows a variable green bar for changes in volume of things I try to play.
Any ideas? Are we just waiting for the release of new drivers from Lenovo?

The other two is the Card reader. just install the Card reader drive for Vista. I'm also figuring out the third one though. =(
Trying Win 7 x64
EDIT:
The third one is caused by Lenovo not supporting a x64 ACPI. Drivers on the lenovo page are usually 32 bit even for Vista.
I googled around just wanted to share my findings.
http://www.vistax64.com/drivers/167584-unknown-device-microsoft-acpi-compliant-embedded-controller-2...
This one I followed the instruction of the last commenter but didn't complete. So it's seems feasible to apply.
http://www.sevenforums.com/drivers/7185-unknown-driver-acpi-vpc.html
This one did the Trick. The 4th commenter "BAROD". Advised trying the x64 Vista Y530 Energy Management Driver. It did removed the warning in devices. But it also change the UI on the Lenovo keys from green to blue mirroring the Y530's key UI. Tested the battery life. It seems ok as mismatched drivers can mean the indicator will show a few minutes instead of hours of battery left. Lol!
**Do this at your own risk though. But, hey Windows 7 is taking a risk already as Y410 isn't officialy supported. =p

Trouble with new install od Desktop Manager 4.2

I'm new to Forums but I can't seem to fine help anywhere else! I have had a Blackberry 8100 for a while. All worked well with my old Pentium 4. I have moved ovet to an i7 processor and Windows 7. I have read a few messages on here and have corrected the USB power problem. I have downloaded and installed Drivers DM4.5_B13 and now the connection is seen by DM. I have a problem now that some of the program is in English and some is in another language! I'm guessing it's Arabic or similar. Things like Microsoft Outlook Takvim and in the fields section one side says Title and the other says Unvan or Address on one is Eposta Adres.
Can anyone help me?
D.O.
Solved!
Go to Solution.

If you were successfully able to install BlackBerry Desktop Manager 4.2, I would go through the clean reload process as shown here:
http://www.blackberry.com/btsc/KB11320
This will make sure any old files are removed from your computer before installing the new one.
-CptS
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Can't connect Photosmart 7510e all-in-one C311a to network for updates-new install-Windows 7 32 bit

During installation of new printer and wireless e-print set up (Photosmart 7510e all-in-one C311a) I was asked to use printer to check for updates but I am getting error "printer is not connected to a network". I have printer connected to laptop via USB. Laptop have active wireless connection, Windows 7 Pro 32 bit. Please advice.

Hi mjf11,
Sorry you are having trouble. Here is a link to the HP Network Diagnostic Utility, which should help you resolve your network connectivity issue:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&lang=en&lc=en&product=507...
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

Trouble with new install n-gage

Hi, I recently did a soft reset (*#7370), and i lost n-gage. Now i can't install n-gage on my phone n96. I get answer "update error" i don't know what to do please help.

That’s most odd as it is not an upgrade but a fresh installation.The only thing i can think of is you have some of N Gage installed and it is viewing the new installation as an upgrade as it has a different version number. I would have a look if it is listed in your application manager list... You could try asking the N Gage support site http://www.n-gage.com/ngi/ngage/web/uk/en/support.html
N96-1 + 8G SD~Software Version 30.033~Software Version Date 18-06-09~Type RM-247~P/C 0543713~T Mobile UK

CS5 new install Windows 7

HI,
I just installed CS5 on to my Windows7 laptop. I have uploaded images via BR5, but it will not allow Camera RAW to open. I opened PSCS5 and opened several images, but still cannot open Camera RAW in BRCS5.
I notice that the CR2 Canon files are defaulted to IRFANVIEW. Do I need to change the link?
Thanks,

In Bridge in top toolbar go to edit/preferences/file type associatioins. There will be a long list of file types, most of these should be set to CR5. Scroll down to CR2 and change default to CS5..
Away from home computer and don't have Bridge on this portable.so difficult to tell you exactly where CR2 should be on list.

¿Existen drivers de MacBook Pro para windows XP?

Me he instalado el windows XP por medio de Boot Camp, sin embargo cuando intento instalar el Software de compatibilidad que viene en el disco de instalación de Snow Leopard me advierte que requiere de windows 7 para hacer la instalación, tambien me he bajado el software de instalación desde los primeros pasos a seguir en boot camp. ¿Alguien sabe si existen los drivers para XP? Si existen ¿En dónde los puedo encontrar?

Ok, that's what I have done... I have Snow Leopard Installed, 10.8.6 and it's got Boot Camp 3.0.4... my questionis the Mac Windows Install Drivers you add after installing Windows. Windows looks terribly awkward and I'm guessing it has something to do with the ATI graphics card sofware the mac disk installed. Is is ok to use the one I created years ago? I can't seem to find a place to create a new one using the 10.8.6 and 3.0.4.
When I orignially installed Boot Camp you had to create a disk using Boot Camp that you installed in Windows after the initial OS installation.

How to install windows on macbook air

when i install windows 7 with bootcamp. my mba is restart and boot from windows but my mba keyboard is stuck. any key not working.
i have troubled how to install windows on macbook air 11 inches.

Hey komalsingh,
Thanks for the question. I understand you are having issues with your MacBook Air keyboard and BootCamp. The Boot Camp Installation & Setup Guide provides some information that may be relevant:
(Click image to view larger)
via page 8 of
http://manuals.info.apple.com/MANUALS/1000/MA1636/en_US/boot_camp_install-setup_ 10.8.pdf
Thanks,
Matt M.

HARD DISK DRIVER ISSUES WHILE INSTALLING WINDOWS 8

I am trying to install windows 8 on my PC, but it is asking for hard drive drivers. I have installed windows 8 before with no issues on the same PC with same configuration, but now I am facing these driver issues. Currently I am running Win7 as i cannot
reinstall Win8.
Config:
Gigabyte Motherboard 945G with Intel Core2duo8400 3ghz,
Intel(R) 82801G(ICH7) FAMILY CHIP SET,
4gb Ram, Nvidia graphic card, Seagate hard disk 160Gb.

Hi,
I doubt that the hard drive is either a SATA drive or in a RAID setup, you might need to install RAID controller drivers or SATA driver during the installation.
I also suggest you refer to the following link and check if it can give some hints.
https://social.technet.microsoft.com/Forums/en-US/6e278d52-1e69-4bca-8beb-f0424eed5891/installation-problem-windows-installer-cannot-find-hard-disk-drivers?forum=w7itproinstall
Please also check this KB
http://support.microsoft.com/kb/937251
Yolanda Zhu
TechNet Community Support

Mac OSX recovery after failing to install Windows?

Here's the story.
1) I install the bootcamp assistant and create a 10GB partition.
2) I burn the drivers CD and click 'install windows'.
3) The install fails a couple of times.
4) Finally I'm asked on what partition I want to install Windows.
5) There is only one choice, which bothers me, but I don't want to start all over again so I take the risk. I also choose the Fast NTFS Formatting.
6) The Setup continues, then it says: 'this part of the setup has been completed. press any key'.
7) The screen goes black for a very long time.
8) I reboot a couple of times. The setup wants to start again from scratch.
9) Fed up I reboot and press option to use OSX to delete the partition.
10) A white screen and a cursor appear, yet no options.
11) When I insert the OSX boot disk, I get an error: "no bootable device -- insert boot disk and press any key".
It stays this way.
- Have I really deleted everything on my HD?
- Is there a way to recover what I have lost?
- If not, how can I format my whole HD and delete the partitions as well?
iMac Intel Mac OS X (10.4.9)

Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows XP.
Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & XP, everyone there has or at least has an interest. You may attract help more quickly there.
The Forum is at the bottom of the main Apple Discussions page under Windows Compatible Technology.
Here is a link;
Forum: Boot Camp Public Beta

I have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

i have an iMac with mountain lion 10.8.3 with boot camp 5.0.2 .i installed windows 7 -64 bit with boot camp but the boot camp didn't install drivers for windows please guide me for trouble shooting .

Kappy wrote:
Boot Camp doesn't install the drivers. You have the drivers on a separate USB device if you followed directions. Once in Windows connect the USB drive with the driver software. It should startup automatically and install the drivers.
You don't even need to do that. As downloading the drivers from within Boot Camp Assistant can be unreliable, it is better to get the package directly from here:
http://support.apple.com/kb/DL1638
Copy the .zip file to a USB flash drive or burn it to a DVD in OS X. Install Windows as normal, insert the flash drive/DVD in Windows, copy the .zip file to the hard drive, extract it, then run the setup executable.

**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

**I've installed Windows 7 through bootcamp on the new 2012 iMac now I have no network drivers or graphics drivers to run aero! Help! **

I have been through it again and at the end it came up with the error:

Having trouble installing Windows 8 drivers

I know this has been asked a million times but I couldn't find a specific answer to my problem. I previously had Windows 7 on my boot camp partition and then I decided to install Windows 8 a couple months ago. I'm just now getting around to installing the drivers and I'm having issues.
Long story short, I downloaded the Windows Support Software onto my external drive (formatted MS-DOS(FAT). I then boot into my Win 8 partition and open up my external drive. There are two folders "$WinPEDrivers$" and "Bootcamp." I open up the bootcamp folder and run "setup." The setup installs the video card drivers and then prompts me to install Bootcamp Version 5.0. I try to do so and it will not let me procceed. I get the error "Boot Camp requires that your computer is running Windows XP Service Pack 2 or Windows Vista." I dont completely understand this at all considering it is the latest version of Boot Camp I am installing on Windows 8. Any help would be much appreciated. Installing these drivers are turning into a pain.

always include which Mac.
depends on things like did you just install over 7?
how much free space? have you gone into disk cleanup and removed the old Windows?
do you run CCleanup?
Clean up the TEMP folder is always a good idea
Boot Camp: Frequently asked questions about installing Windows 8
Summary
Learn more about how Mac computers can run Windows 8 using Boot Camp 5.
http://support.apple.com/kb/HT5628
Products Affected
Boot Camp, Windows 8
General installation questions
What is Boot Camp 5?
Boot Camp 5 is not a release of OS X software. Rather, it is a release of the Windows Support Software (drivers). You will need to use this software on your Mac with Windows 8 or Windows 7. For more information on Boot Camp 5, see thttp://support.apple.com/kb/HT5639
Which Macs support Windows 8?
MacBook Air (Mid 2011 or newer)
MacBook Pro (Mid 2010 or newer)
Mac Pro (Early 2009 or newer)
Mac Mini (Mid 2011 or newer)
iMac (27-inch, Mid 2010 or Mid 2011 or newer)
For more information, see this article.
What are the System Requirements for Windows 8?
Please see this article.
How can I install Windows 8 on an eligible computer?
Use the Boot Camp Assistant. The assistant will partition your internal hard drives and install Windows 8. For more information on Windows 8 installation, see the Boot Camp Installation & Setup Guide.

Drivers trouble in new installed windows 8.1

Similar Messages

Maybe you are looking for