Drives Orphaned from Array
From a combo of events we have two drives that were orphaned from their RAID Arrays and Admin 1.5.1 will not allow them to be selected for Array Deletion. They were working fine, no problems. We were new to using XServe and we were playing around with various configurations when this happened.
Individual drives are labeled as degraded, with yellow lights on the front.
If we try and create an Array with the drives, we are told they are already part of a RAID Array.
We have no risk of loss of data and could do a raw remove Array initialization if anyone knows a method.
Thanks, Randel
Message was edited by: Randel Reiss
Forum article entitled: Trashing an old RAID setup?
Posted: Feb 7, 2007 3:31 AM
On Posted: Feb 7, 2007 10:45 AM, s.gifford wrote:
"I was having the same issue and going :Raid Admin-> Utilities -> make drive available for use: worked for me-perfectly. Only one thing-it took about 5 minutes for that drive to become available. So give it a few."
Worked for me, thanks all!
Randel
Similar Messages
-
Memory/Speed of Split 1D array vs Delete from array
Just wondering how Split 1D array works - does it create two new arrays in a new section of memory or does it just split the existing array in two, reusing the memory in place. (assuming that the original array is not needed elsewhere). If the latter is the case then presumably it is more efficient to use split array than delete from array if I want to remove element(s) from the beginning or end of the array. Is there a speed advantage as well?
If I use split array but don't then use one of the output arrays is that memory deallocated or does the array remain in memory?
Thanks
DaveOk please ignore the results I posted earlier, they are rubbish - not least because I got the column headings mixed up but also because my code was full of bugs
So, here is a revised table, and the code - which hopefully only contains a few bugs... I'm not clued into benchmarking yet so please feel free to rip the code apart.
I still get different results depending on where in the array I split it, most noticeably with subset and reshape. There is no effect with split. I'm guessing this is to do with the memory allocation. (I have not preallocated memory in my code, but I did wire the output arrays to Index Array)
Message Edited by DavidU on 08-12-2008 04:49 PM
Attachments:
Benchmarks 2.png 13 KB
split array test.vi 25 KB -
I had to get my hard drive replaced from Apple, I lost all of my music obviously. My question is, how can I get all my music off of my iPhone onto iTunes? Since it's a new hard drive, the iPhone isn't recognizing this as it's home computer.
You will need to use third-party software to transfer music from your phone to the iTunes Library. I recommend Phone to Mac - Pod to Mac | Macroplant.com.
-
How to add drive space from one drive to another drive in Solaris 10
This is something I have never done in Solaris. I have a mounted drive (UFS) with a dir being used for a samba share. The dir is near full. I have another drive right beside it that is empty.
1. How can I add the drive space from the empty drive to the dir or drive that is nearly full? I have to access all files on both drives from the samba share.
2. Can I do this without loosing files?
3. Can I do this without messing up the samba share?
4. Can this be done on the fly without re-boot?
Thanks in advance.I would start by getting acquainted with ZFS.
Make sure you have a recent Solaris 10 version with a stable zfs impl. like u4 and later.
Make sure you have installed reasonably recent Solaris 10 recommended patches - they make a big difference to ZFS.
Simple solution :
* put your new drive in a zpool
# zpool create smbpool <new_drive_device, fx. c0t1d0>
* make a zfs
# zfs create smbpool/smbfs
* stop your samba server
# svcadm stop smb ?
* copy your files to your zfs fssmb_ufs=old samba fs
# cp -rp <old_samba_fs> /pools/smbpool/smbfs
* un-mount and say goodbye to your old samba fs - /wave
# umount <old_samba_fs>
* expand your zpool with the old samba server fs partition
# zpool add smbpool <device name for old samba slice, fx. c0t0d0s6>
* move your zfs fs to be mounted on the same mount points as the old samba server fs
# zfs set mountpoint=<old_samba_mountpoint> smbpool/smbfs
* restart your samba server
# svcadm start smb ?
It requires downtime for the samba server to copy the files, which could be cut shorter by using rsync, rsyncing while samba server online, stop samba server, rsync again for the changes while the first rsync ran. -
i have a g4 running os10.4.11, i bought a epson workforce 1100 and tried to set it up but there is not a listing for it when i try to add it before installing the driver software from the supplied cd...anyone know what i can do to get it set up?
Load the drivers and you should then be able to add it in Print Center.
-
I recently had the genius bar change my imac hard drive because it crashed. For some reason Time Machine didn't back up some of my important files. Can I get my damaged hard drive back from the genius bar to see if I can access that info?
Unfortunately, that drive is long gone, probably back to the mfr. Drives are not returned when they are exchanged. You can go by and ask them, but the chances are slim to none.
-
How do I input songs from my external hard drive (taken from a PC) and transfer them to my Mac?
How do I input songs from my external hard drive, taken from a PC, to a Mac?
Just a few song tracks, or your whole library? If just a few tracks, drag them from the drive to the open iTunes library window or playlist window. If your whole library drag the whole iTunes folder to your computer. Hold down the option key while starting and guide it to the library.itl file in that folder. If you need to merge libraries post back because that's a much longer post.
-
This is not the easiest sight to sign up for and submit a question. However my external drive switched from g drive to f. As I downloaded the new version of itunes it won't change from g drive to f drive when I click the button to change. It just says g drive is unavailable to download itunes which I already aware of but it won't let me browse and find the right drive my external drive is on. It won't configure or anything what do I do?
Change the drive letter back to G:
See this -> http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-le tter -
I have a Macbook Pro that I have just renewed and transferred over my old hard drive (also from a Macbook Pro). Now when I turn on the computer and ITunes opens I get error (-50) and then error 5002 when I try to sign in to ITunes Store - Help!
My dealer has tried and failed (twice) to correct this and I have tried deleting the two items in the Itunes folder but no luck!were you able to get help on this? I need help on error 5002 as well. thank you
-
how do I copy files onto a hard drive (device) from Mac 2 7 pc. I'm able to transfer files from device but cannot transfer files to device. Anyone had same problem or can help solve this problem? Help pls
Welcome to Apple Support Communities
When you try to copy data to the external drive, what happens? If you don't see any error, the external drive is formatted in NTFS, and OS X can't write in it.
To be able to write on this external drive, you have to use an app like Paragon NTFS. Another solution would be to format the external drive in FAT32 or exFAT with Disk Utility > http://pondini.org/OSX/DU1.html Make sure you copied all the files of the external disk to the internal disk before doing it -
Remove text field from Array via for loop
Hi,
i have a problem to remove text fields added via for loop.
That im doing is, via for loop im dynamically creating menu with 10 buttons.
Each button contain, dynamically created, background (shape) and text field.
And everything is fine.
But when im try to remove text fields then i got this error:
- Im using button to remove text fields - lang_btn.addEventListener(MouseEvent.CLICK, clickHandler);
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
at flash.display::DisplayObjectContainer/removeChild()
at Loading_Img_fla::MainTimeline/xmlLoaded()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
In the script bellow marked with red is what should remove text fields from an Array, instead giving me error.
Here is my script
// Create for loop
for (var i:int = 0; i < 10; i++)
for each (xml in listItems)
if (i == xml.attribute("Id"))
// Add MovieClip to stage to hold the data
addChild(lmHolder);
lmHolder.x = 0;
lmHolder.y = 0;
// Create new MovieClip to hold buttons
lmButtonsMCArray[i] = new MovieClip();
lmButtonsMCArray[i].buttonMode = true;
lmButtonsMCArray[i].mouseChildren = false;
lmButtonsMCArray[i].x = 20;
lmButtonsMCArray[i].y = 20 + btCount * buttonSpace;
// Add each button MovieClip to lmHolder MovieClip
lmHolder.addChild(lmButtonsMCArray[i]);
// Create Background to buttons
lmButtonsArray[i] = new Shape();
lmButtonsArray[i].graphics.beginFill(lmBgColor0, 1);
lmButtonsArray[i].graphics.drawRect(0, 0, 230, 85);
lmButtonsArray[i].x = 0;
lmButtonsArray[i].y = 0;
// <<-- Add Background shape to the buttons MovieClips
lmButtonsMCArray[i].addChild(lmButtonsArray[i]);
// Create a new array to preserve data from XML List
lmNameArrayEG = new Array();
lmNameArrayUS = new Array();
// Create local variable to hold
var lmTxtFieldContentUS:String;
var lmTxtFieldContentEG:String;
var lmTxtContent:String;
// If clicked button is EG then make array with Arabic text
// If clicked button is US then make array with English text
if (footer.lang_btn.langState == "EG")
for each (var leftMenuName:XML in egLanguageList)
lmNameArrayEG.push(leftMenuName);
lmTxtFieldContentEG = lmNameArrayEG[i];
lmTxtContent = lmTxtFieldContentEG;
else
for each (var leftMenuNameUS:XML in usLanguageList)
lmNameArrayUS.push(leftMenuNameUS);
lmTxtFieldContentUS = lmNameArrayUS[i];
lmTxtContent = lmTxtFieldContentUS;
// Setup new text field each time script is executed
lmTxtFieldsArray[i] = new TextField();
lmTxtFieldsArray[i].width = 110;
lmTxtFieldsArray[i].border = false;
lmTxtFieldsArray[i].wordWrap = true;
lmTxtFieldsArray[i].multiline = true;
lmTxtFieldsArray[i].selectable = false;
lmTxtFieldsArray[i].embedFonts = true;
lmTxtFieldsArray[i].antiAliasType = AntiAliasType.ADVANCED;
lmTxtFieldsArray[i].autoSize = TextFieldAutoSize.CENTER;
lmTxtFieldsArray[i].text = lmTxtContent.toUpperCase();
lmTxtFieldsArray[i].x = 10;
lmTxtFieldsArray[i].name = "lmTxtFieldName" + i;
// <<-- Add Text fields to the Movie Clip
lmButtonsMCArray[i].addChild(lmTxtFieldsArray[i]);
// If clicked button is EG then set Arabic text format, and make array with Arabic text fields
// If clicked button is US then set English text format, and make array with Egnlish text fields
if (footer.lang_btn.langState == "EG")
lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_eg);
// Make array from text fields;
pushEgTFintoArray.push(lmTxtFieldsArray[i]);
else
lmTxtFieldsArray[i].setTextFormat(txtFormat_lm_us);
// Make array from text fields;
pushUsTFintoArray.push(lmTxtFieldsArray[i]);
// If clicked button is EG then loop thrue the for loop and remove English text fields from array
// If clicked button is EG then loop thrue the for loop and remove Arabic text fields from array
if (footer.lang_btn.langState == "EG")
for (var rNr_us:Number = 0; rNr_us < pushUsTFintoArray.length; rNr_us++)
//remove the text field array from the display
removeChild(pushUsTFintoArray[rNr_us]);
//clear the array
pushUsTFintoArray = [];
else
for (var rNr_eg:Number = 0; rNr_eg < pushEgTFintoArray.length; rNr_eg++)
//remove the text field array from the display
removeChild(pushEgTFintoArray[rNr_eg]);
//clear the array
pushEgTFintoArray = [];
btCount++;it looks like those tf's are children of lmButtonsMCArray[i], not the current scope. use:
if (footer.lang_btn.langState == "EG")
for (var rNr_us:Number = 0; rNr_us < pushUsTFintoArray.length; rNr_us++)
//remove the text field array from the display
lmButtonsMCArray[rNr_us].removeChild(pushUsTFintoArray[rNr_us]);
//clear the array
pushUsTFintoArray = [];
else
for (var rNr_eg:Number = 0; rNr_eg < pushEgTFintoArray.length; rNr_eg++)
//remove the text field array from the display
lmButtonsMCArray[rNr_eg].removeChild(pushEgTFintoArray[rNr_eg]);
//clear the array
pushEgTFintoArray = []; -
Error in downloading one drive application from apple store
error in downloading one drive application from apple store
I've been having some problems with the OneDrive app - I'm able to download and use it but whenever I search for it on the Mac App Store it says it needs updating even though it never shows up in Software Updates.
You may need to update your version of OS X from 10.8 to 10.8.5 (if indeed you are running 10.8) -> http://support.apple.com/kb/DL1676 and http://support.apple.com/kb/DL1686.
If you are on 10.8.5 already, I've no idea why you're unable to download. Try rebooting and opening the Mac App Store application again and give it another go.
Clinton -
hello - i am considering two macbook pros
NEW - http://store.apple.com/us/buy-mac/macbook-pro?product=ME294LL/A&step=config#
REFURB - http://store.apple.com/us/product/G0ML1LL/A/refurbished-macbook-pro-27ghz-quad-c ore-intel-i7-with-retina-display
The refurb actually has a faster processor and a larger hard drive. From what I understand, the big difference in cost is the new macbook pro contains "512GB PCIe-based Flash Storage" versus the refurb "768GB Flash Storage".
Is the PCIe flash storage really worth the extra cost (and smaller size)?
PS - Also I believe the brand new one has 2 GB graphics memory as opposed to 1 GB graphics memory. I don't really care about that as much as I won't be doing a lot of video editing or gaming.RestonManJavaLuver wrote:
Is she wrong - are these actually going to people's homes, being used, then returned and resold?
Some are some are not. Otherwise Apple has a ton of Mac's sitting around that have been returned by customers under their 14 day No Questions Asked return policy.
But they not just Returned and Resold. They go back to Apple, checked out (Tested) any parts that are not up to spec replaced and then repackaged in a plain white box to be sold as refurbs. -
I have two older macs running Mountain Lion that have been upgraded over the years from Leopard. They have continued to be able to print to a Canon IP5000 and use a driver that is fully functional. On the new MacBook Pro, the printer is found, but no driver is available for Mountain Lion from apple or Canon. Is there a way of getting the driver info from the old mac so that it will work on the new one?
Sorry, it says "New Event," not "New Entry." My bad.
-
Writing data from array to file
May i know how to write string from a array into a file.
I have use string tokenizer to extract every line from a file using readline and use stringtokenizer to spilt the line using tab delimiter for processing.
But if i want to write data from array to file with tab as a delimiter and how to go to the next line. How do i do that. Below is the task and i have state a simple example on a array i have and the file output that i want.
Pls advice.. Thanks
eg of a array
array[0] = Data
array[1] = One
array[2] = Data
array[3] = Two
array[4] = Final
array[5] = Data
From the above array, i want to write to a file so that it will appear something as below
Eg textfile.txt
Data One
Data Two
Final Data
PLs attached a simple code as a example as i am only begining to start useing the IO feature in java. ThanksReally thanks for your help,
but u are mentioning that i have already know the number of countters in advance , that is to say the 2 * counters.
But is there a way to solve this problem which i mean if i dun know the number of predefined counters. Maybe i should say, there is more than 2 counters and in another situation, the counters will only be defined during runtime. Actually the solution u give will work nicely with 2 counters. but wat if the counter is more than 4, i wll have to concatenate the string a lot of time. so is there any solution around this problem. That why i am wandering if tere is any solution to write to the file when the counters can be only determined in runtime
Pls advice on the above with a code samples if possible.
Maybe you are looking for
-
Can Olympus RAW files open in Lightroom mobile?
Can Olympus RAW files open in Lightroom mobile?
-
Hi Guys! Can someone tell me how to create a Human Task in an empty project? These are the problems i m facing: 1. I dont have any schema in my process so i cannot choose the task parameter 2.If i choose initiateTask from workflow.xsd as the task par
-
Send a SCSI command to the device in attach ( )
I want to send an Inquiry Page and Read Buffer SCSI command to the device in attach( ). Can I do that? How to do that? Thanks.
-
How to install plugin from an intranet webserver.
I am trying download and install java plugin from an intranet webserver. The code I used in OBJECT tag as below: "codebase="http://myserver:7001/mydomain/support/j2sdk-1_4_1_01-windows-i586.exe" but I got a warning from IE which says:Can't run the Ac
-
We are looking for some sort of answer to the following question. 1. Is there a measurement of the amount of interfaces (number of calls, size of messages per some timeframe) that we should be able to handle in the server which has 16GB Mem and 8 CPU