Driving me insane please help:O

I cant sync tv programmes to my 16GB I-Pod Touch i spent 2 hours downloading an episode of Deadliest Catch and could watch it on my computer but cant transfer it to my i-pod.
Can anyone please give me a solution please. As basic as possible would be good as im thick as 2 short planks with this tecnolagy stuff:))))
Many Thanks.

It sounds like you're trying to load the HD version .
It's the SD version you want.
Right click on the show and scroll down to version and click on SD for the one for your iPod.

Similar Messages

Windows 7 application error 1000 - driving me insane please help

I keep getting the message - windows explorer stopped working when i tried to upload photos, look at them on computer etc
I tried many offered solutions and this is what i found:
System
Provider
[ Name]
Application Error
EventID
1000
[ Qualifiers]
0
Level
2
Task
100
Keywords
0x80000000000000
TimeCreated
[ SystemTime]
2014-05-28T20:41:48.000000000Z
EventRecordID
30226
Channel
Application
Computer
Mia-PC
Security
EventData
explorer.exe
6.1.7601.17567
4d672ee4
ntdll.dll
6.1.7601.18247
521eaf24
c0000005
00000000000317a7
18f4
01cf7ab4b783d6b3
C:\Windows\explorer.exe
C:\Windows\SYSTEM32\ntdll.dll
7cc28f3a-e6a8-11e3-8a86-14dae9e553d7
I have been trying to fix this for over a week, please help before i sling this computer out of the window
Mandy

Hi, I would try to use the calendar to fallback on a system restore's point if you can, something hooked's up on your explorer.exe. Could be a malware too, depend what you do on your Windows 7.
Regards, Philippe
Don't forget to mark as answer or vote as helpful to help identify good information. ( linkedin endorsement never hurt too :o) )
Answer an interesting question ? Create a
wiki article about it!

KEYBOARD WEIRDNESS DRIVING ME INSANE PLEASE HELP

Hey,
I bought my Macbook Pro about three months ago, and I am absolutely anal about taking care of it.
Recently, my spacebar and my caps lock keys have began sporadically not working. I'll be typing and then all of a sudden the spacebar will just fail (So I'll be typing and it will be like "Oh hey do youwantto go out tothe place later?"). And then over a period of about two minutes it will gradually work less and less frequently until it stops working completely. When the spacebar goes into this mode, the caps lock button does too. They don't seem to do it independently, but at the same time, no other keys are affected.
There doesn't seem to be any rhyme or reason to this malfunction. The only pattern that I noticed is that it usually happens when I'm typing in World of Warcraft (yeah I know im a loser don't rub it in). However, it's not always the case. It has happened several times when the program isn't open and has not been opened since the computer has been turned on.
Also, once it does happen, there doesn't seem to be any way to make it start working again. It always comes back eventually, but there doesn't seem to be anything I can do, I just have to wait it out. I've tried restarting the laptop, shutting it down completely and letting it sit for awhile, taking out the batteries, trying to blow anything out that might be under the keys themselves (even though I doubt there's anything there because I take such good care of it), tapping the button repeatedly, etc. Nothing seems to work. And since I can't find any patterns, I really can't tell if this is a hardware problem or software problem.
Someone help me PLEASE I'm going out of my mind. I can't get an appointment at the apple store for several days but I need my computer for work this week and and waiting that long is really not an option. Thanks so much in advance.

Hi Tuffcookie1877, welcome to Apple Discussions!
It almost definitely sounds like a hardware problem to me, I'm sorry to say. You'll likely have to have the keyboard replaced under warranty. I can't think of any software problems that would cause a sporadic spacebar malfunction.
--Travis

SQL driving me mental, please help

I have the following tables in my database.
customerinfo
lineitem
orderhistory
productinfo
I just recently changed my database to provide for normalisation but it screwed with my sql statement.
I used to be able to type:
ResultSet res = stmt.executeQuery("SELECT * FROM orderhistory WHERE CustomerDescription ='"+CID+"' ORDER BY OrderID");
This would return a:
ProductDescription
Quantity
Cost
and Total Cost.
These were originally all in a single table but now ProductDescription is in productinfo, Cost is in productinfo, Quantity is in Lineitem, and TotalCost is in orderhistory.
Can anyone figure out the statement i must use to get the correct result set???? Please, I have tried everything and have hit a brick wall everytime.

Sorry to bother you again but this is driving me insane and I really need to get this sorted. Here is the problem.
I have three table in my database as follows:
LineItem Table consists of 3 fields:
LineItemId, OrderID and Quantity.
OrderHistory table has 3 fields:
OrderID, CustomerID and Total
ProductInfo table has 4 fields:
ProductID, ProductDescription, Cost & ProductLocation.
OrderID is the primary key:
What I want to do is extract the OrderId, ProductDescription, Quantity, ProductCost & Total where CustomerID = '.....'
I am having major problems with linking my tables and receiving duplicate results.
At the Java side of things, i would select a customerID, and the above order details would be returned. Here is the code i am using:
ResultSet res = stmt.executeQuery("select * from orderhistory o, customerinfo p, productinfo c where o.CustomerID = p.CustomerID");
while(res.next())
txtCustomerID.setText(res.getString("CustomerID"));
txtArea.append("ORDER ID: " + res.getString("OrderID")+ "\n" );
txtArea.append("**************************************************" + "\n");
txtArea.append("Product Description: " + res.getString("ProductDescription" )+"\n");
//txtArea.append("Product Quantity: " + res.getString("Quantity")+"\n" );
txtArea.append("Product Indidvidual Cost: " + res.getString("ProductCost")+"\n" );
txtArea.append("Product Total Cost: " + res.getString("Total")+"\n" );
txtArea.append("**************************************************" + "\n");
Any help would be greatly appreciated.

Oracle 10g Rel2(10.2.0.3) on Vista ultimate driving me crazy, Please HELP

Hello Folks and Expert,
I am Certified Ora DBA and am stuck, thats a shame
I am going to install and Test Oracle 10g on Vista as my future client will use Just Vista and no othr OS, so there is no OTHER OS options,
I ready all the documentaiotn and release notes and also read that Oracle 10g(10.2.0.3) is certified on Vita Ultimate.
I downloaded the DB which is frm the below link:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
*** It installs but it justdoesn't work properly, PLEASE HEEEEEEELP I am running out of time.
steps I have done:
1. Installed loppback and tested and it works when I ping, both ping computer and ping computer.domain with no error.
- whic means under windows>system32>driver> etc>host I added the 10.10.10.10 and cmputer name.
2. Under MMC I added cmputer local policy for local computer
3. Also Under "Local security setting" under "Local Policies" Under "User right Assignment" Under "Log on as a Batch job" I added the User name which was created when weload the Vista for the first time which is the Computer Admin, ALSO REALOADED THE COMPUTER WITH TH FACTORY SETTING AND AFTER THE FIST BOOT, UNLOCKED THE "ADMINISTRATOR" USER OF THE OS AND TESTED WITH THE ADMIN USER AS WELL WHICH WAS ADDED TO THIS lOG ON AS A BATCH JOB.
4. Restarted the Computer on all the step that I had to
5. Downloaded the DB and installed the DB, it installled without any Error
******************My Questions are as belooooowww ******************
When Oracle installd he prduct, usually under the
Start menu> All programs we should have 4 folders (Application Development, Configuration and Migration, Integrated management tools, Oralce installlation products) and DATABASE CONTROL - ORCL
a - when installation finishesh it JSUT DOESN't CREATE ------> DATABASE CONTROL - ORCL Whyyyyy ? (It is driving me crazy, I have another xp machine and it has also I had EVEN Vista Home premium and I was able to install on it before to test)
b - I can loging to the database after i type the adress I remembered manually in the browser, it logs in without any errror, but
When I want to shutdown the database It passes the host crendential once and I wait and it does nothing and a little windown pops up and says
*"Enterprise manager stopped working"*
C - To test and stop Listener also it just doesn't stop it and doest the samething,
I just wannna CRYYY, it is getting me Crazy,
PLEASE HELP ME with all THREE QUESTONS A,B,C PLEASE HELLLLLLPPPPP
Rgrds,

Hello Folks and Expert,
I am Certified Ora DBA and am stuck, thats a shame
I am going to install and Test Oracle 10g on Vista as my future client will use Just Vista and no othr OS, so there is no OTHER OS options,
I ready all the documentaiotn and release notes and also read that Oracle 10g(10.2.0.3) is certified on Vita Ultimate.
I downloaded the DB which is frm the below link:
Oracle Database 10g Release 2 (10.2.0.3/10.2.0.4) for Microsoft Windows Vista and Windows 2008
*** It installs but it justdoesn't work properly, PLEASE HEEEEEEELP I am running out of time.
steps I have done:
1. Installed loppback and tested and it works when I ping, both ping computer and ping computer.domain with no error.
- whic means under windows>system32>driver> etc>host I added the 10.10.10.10 and cmputer name.
2. Under MMC I added cmputer local policy for local computer
3. Also Under "Local security setting" under "Local Policies" Under "User right Assignment" Under "Log on as a Batch job" I added the User name which was created when weload the Vista for the first time which is the Computer Admin, ALSO REALOADED THE COMPUTER WITH TH FACTORY SETTING AND AFTER THE FIST BOOT, UNLOCKED THE "ADMINISTRATOR" USER OF THE OS AND TESTED WITH THE ADMIN USER AS WELL WHICH WAS ADDED TO THIS lOG ON AS A BATCH JOB.
4. Restarted the Computer on all the step that I had to
5. Downloaded the DB and installed the DB, it installled without any Error
******************My Questions are as belooooowww ******************
When Oracle installd he prduct, usually under the
Start menu> All programs we should have 4 folders (Application Development, Configuration and Migration, Integrated management tools, Oralce installlation products) and DATABASE CONTROL - ORCL
a - when installation finishesh it JSUT DOESN't CREATE ------> DATABASE CONTROL - ORCL Whyyyyy ? (It is driving me crazy, I have another xp machine and it has also I had EVEN Vista Home premium and I was able to install on it before to test)
b - I can loging to the database after i type the adress I remembered manually in the browser, it logs in without any errror, but
When I want to shutdown the database It passes the host crendential once and I wait and it does nothing and a little windown pops up and says
*"Enterprise manager stopped working"*
C - To test and stop Listener also it just doesn't stop it and doest the samething,
I just wannna CRYYY, it is getting me Crazy,
PLEASE HELP ME with all THREE QUESTONS A,B,C PLEASE HELLLLLLPPPPP
Rgrds,

UNKNOWN SYMBOL DRIVING ME MAD, PLEASE HELP!!!

I have a symbol that has come up on my screen. It's a white box with a black dot inside and a red dot like the 'notification star' on it. It's in the same area as where you get your bbm, facebook, email, etc. notifications. I've tried going through all my apps and nothing is helping. It's driving me mad. PLEASE PLEASE HELP!

Hi DivaAoife,
Sounds like an update notification for BlackBerry App World. Do you have an email regarding an update? If not, you may be able to see the update notification in My World within App World.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)!

E: drive full and trying to back up! driving me craaaazy please help

hey! my laptop is like 5 days old! i put all my old photos and music from itunes onto disks from my old laptop and put them onto this one. everything was fine until sunday! the laptop started a back up! i got a messege saying that the disk E: drive was full and to delete files ect... or i could change the settings! i tryed to change the back up to do this onto disk. but iv been told there should be a place to do this on the laptop and the the wall partions may not be set rite. i also keep getting a warning that my E: drive is full and to make space! i have phoned hp support and they say talk to the place i got the laptop from and so i did they said i could sent it back but that means removing everything! i have googled and seen loads of people with this prob so is there a way to fix this? someone please help its drivng me crazy! i have a hp pavilion g6 series. thaaaaaaaanks x

You need to re-run the backup program to unselect the E drive.
As a sidebar, it is actually unwise to backup to the same physical hard drive. You need to realize that you have a single hard drive , that is partitioned in hard disc C,D,E. If that physical hard drive were to crash, cease to function. burn-out, etc, you lose all of it. It is not separate drives.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Order of tunes in library when importing is driving me nuts please help me!

Can somebody PLEASE help me....when I import albums into the library/ playlists it stores all the first tracks, then all the 2nd tracks, then all the 3rd tracks, and so on....like 1 1 1 1 2 2 2 2 3 3 3 3 and so on, down the list, and plays them in that order too. Extemeley annoying...can anyone help me rectify this problem?

click on the column header that you want to sort by (artist/album/track#/song title etc)

IMovie unexpectedly quits - Driving me crazy, please help???

Hi All
I am in desperate need of help.
I am currently trying to both Publish and or Export a project using iMovie 09. The project runs for 2 and half hours and contains various home movies I have recorded over the year. The actual footage has been recorded on both my Sony AVCHD camera and also my iphone 4 (both of which I have been able to publish projects with previously). The project is nothing fancy, it contains the usual Titles, Transitions and chapters. Every time I attempt to either publish or export the project I receive an error message advising “iMovie has unexpectedly quit“. I have tried to publish in all sizes (Tiny, Mobile, Medium, Large & HD) all with no success and have also tried exporting using imovie and quicktime numerous times with varying settings. All combinations continue to result in the same error message. On a side note I have created a smaller “Test Project” of which only runs for one minute, this again uses footage from both cameras and features the same Titles, Transitions and chapters. This file both publishes and exports without problem.
As the smaller/shorter file/clip works I have to assume the problem relates to the size of my project, this then strikes me as being odd as I have other projects running upto 2hrs 53Min of which have been published in HD previously. I am using a 2.8 Ghz intel core 2 Duo processor with 4 GB Ram.
When I proceed to send an error report to apple the start of the report reads as follows:
Process: iMovie [19752]
Path: /Applications/iMovie.app/Contents/MacOS/iMovie
Identifier: com.apple.iMovie8
Version: 8.0.6 (821)
Build Info: iMovieApp-8210000~16
Code Type: X86 (Native)
Parent Process: launchd [78]
Interval Since Last Report: 260128 sec
Crashes Since Last Report: 4
Per-App Interval Since Last Report: 84581 sec
Per-App Crashes Since Last Report: 4
Date/Time: 2011-01-12 21:11:44.715 +1100
OS Version: Mac OS X 10.5.8 (9L31a)
Report Version: 6
Anonymous UUID: ED0ECE17-A82C-4F3E-A0CB-5522C53ED1A7
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x0000000042638000
Crashed Thread: 16
Does anyone have any ideas on what the problem could be ? its driving me nuts !!!!
Regards
Dylan

Hi
Does anyone have any ideas on what the problem could be ? its driving me nuts !!!!
No - but may be You find some ideas here.
*Not knowing the origin to Your problem - General approach when in trouble is as follows.*
• Free space on internal (start-up) hard disk if it is less than 10Gb should rather have 25Gb
• Delete iMovie pref file
iMovie pref file resides.
Mac Hard Disk (start-up HD)/Users/"Your account"/Library/Preferences
and is named. (one or more of these)
com.apple.iMovie.plist
com.apple.iMovie3.plist
com.apple.iMovie7.plist
com.apple.iMovie8.plist
and find
com.apple.iApps.plist
While iMovie is NOT RUNNING - move this/these file/s out on to desk-top.
Now restart iMovie.
• Hard disk is untidy. Repair Permissions, Repair Hard disk (Apple’s Disk Utilities application)
• Garageband-fix. Start it, Play a note and Close it. Re-try (Corrects an audio problem that hinders iMovie)
• Screen must be set to Million-colors
• Turn off Mac and disconnect Mains/Power for 20-30 minutes - will at least re-set FW-port
• Third party plug-ins that doesn't work OK (not relevant for iMovie’08 or 09)
• Problems in iPhoto Library can affect iMovie to crash on start-up. Re-build this first then try to re-start iMovie.
This You do by
_ close iPhoto
_ on start up of iPhoto - Keep {cmd and alt-keys down}
_ now select all five options presented
_ WAIT a long long time
• iMovie updated ?
• QuickTime updated ?
• Mac OS version ?
• Program miss-match. iMovie 4 - will not work under Leopard
• Program miss-match. iMovie 5.0.2, up to Mac OS X.4.11 AND QuickTime 7.4.1 - is OK
• Program miss-match. iMovie 6.0.3 or 6.0.4, Mac OS X.4.11 AND QuickTime 7.4.1 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’08 v. 7.1.4, Mac OS X.4.11 AND QuickTime 7.5.5 - is OK (will work under Leopard and Snow-Leopard)
• Program miss-match. iMovie’09 v. 8.0.6, Mac OS X.5.8 AND QuickTime 7.6.4 - is OK (will work under Leopard and Snow-Leopard)
From LKN 1935. (in this case = iMovie HD (5), I tried it all, but nothing worked.
Your answer (above) has been helpfull insofar as all the different trials led to the conclusion that
there was something wrong with my iMovie software. I therefore threw everything away and reinstalled
iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos)
to my Sony camcorders worked properly as it did before.
Lennart Thelander
I run "Cache Out X", clear out all caches and restarts the Mac.
Yours Bengt W

MacBook Wireless -- Driving me crazy -- Please help!!

I have a MacBook Core 2 Duo with 2 GB RAM.
Lately (past month) I have been having some problems with my wireless connection (which occurs no matter what wireless network I am using). When I turn on the computer the wireless download speed is fine. Then, after I have been using my MacBook for a while, the speed begins to fluctuate. If I am downloading a file, the progress bar moves along at a normal rate for a little bit and then stops and then it continues to move along again at a normal rate and then stops and this continues until the file eventually finishes downloading. This occurs no matter what application I am using (i.e. Safari, Firefox, Download a file from my iMac over the wireless network, iChat, etc.). The progress stops about every 2 seconds.
The only way to “fix” the problem is to either shutdown and restart or to just restart. Then things work fine again for some time. It doesn’t seem to happen when I am doing any particular thing or using particular software.
I contacted Apple Support and they had me make some changes to the network and wireless settings (i.e. create a preferred network for my wireless connection, delete some network wireless Library files, repair permissions) and then when I rebooted the machine, it was, of course, working fine while I was on the phone. However, later in the day the problem reappeared.
I was using Tiger and upgraded to Leopard on the weekend hoping that it would magically fix my wireless problems but it hasn’t. I have installed all of the updates as well.
I am hoping that this sounds familiar to someone and there might be a fix for it. I have been looking online for an answer for quite some time. Rebooting my MacBook all the time is driving me absolutely crazy!!! Any help would be greatly appreciated.
Cheers.

Hi,
I'm curious... Will there actually be 10.4.11 now that Leopard 10.5 has been released? I am hoping there will be a 10.411, of course. I got my Macbook the last week of May 2007, installed the 10.4.10 update the day I got the machine, and had problems since.
I called Applecare as soon as I was sure it was my Macbook being flaky, not me doing something wrong. That was the fisrt week of June 2007, and Applecare acted like they never heard of anybody having WiFi disconnect problems on a Macbook. The best suggestion from Applecare was to go back to 10.4.9 - not something that appeals to me, as I'd lose the other fixes in 10.4.10.
The results for Leopard 10.5 are mixed. One thread says it doesn't help, but the users in another thread say it fixes the problem. Either way, I'm not too excited about paying US $129 to upgrade the operating system to fix a machine only a few months old.
-Bill

This rummy game is driving me nuts, Please Help me!!!!

In my project, I am suppose to create an agent that plays a simple version of rummy. To win this game, the agent is dealt seven cards initially, and in order to win, it has to create two sets of combination of cards (one of 3 cards the other of 4), each combination can either have cards of the same rank (eg. 10 Hearts, 10 Clubs, 10 Spades) or the same sequence, but the same suit (2s,3s,4s,5s OR 7c,8c,9c). The cards are saved in an array of seven elements.
Beside the main SDK, we have our own api for this game, that for example lets you check whether two cards are in the same rank (eg. (10H.sameRank(10D) returns true), or whether they have the same suit or not.
I have no trouble creating a hand of cards with the same rank, but my problem is with creating a hand of cards with the same sequence.
I have tried to come up with an algorithm that would allow me to create a hand of cards (of same suit) in the sequence, but without success. This thing is driving me nuts.
CAN ANYONE GIVE ME ANY GUIDANCE PLEASE!!
Thanks

http://forum.java.sun.com/thread.jsp?forum=406&thread=354616

USB Insanity Please help

So, I know there are alot of topics here regarding USB Card Upgrades on these machines. But I am pretty sure I have read them all and none of them are helping me... So here it goes. I love this machine. I have a new PowerBook. But I cant get rid of this machine (I have alot of work on it and I just like the way it runs better then OSX). And up untill now I havent ever needed USB ports on it, but I want this snazzy keyboard and I just bought a new I-Pod. And now I do... That being said. Here is my problem.
The machine is a beige G3
Mac OS 9.2.1
Machine ID 510
Rom Version $77D.40F2
PCI Slots-
A-1 Firewire Card (which works great)
B-2 ATI Rage (Works Great)
B-3 In this slot I used to have a ATI Mach 64 which worked fine. But I took it out and put the rage in. When you look under System Profiler it still shows it being active in that slot. Which is is not......... Problem???
I got a Usb card from Staples, that even has the MAC logo on it. So I popped the side case off. blah blah blah. Installed it in the bottom PCI Slot. Restarted. I realize I dont have any USB Extentions. SO I go to apple support and Download what I assume to be the correct one... "USB Card Support 1.4.1". And ran the installer. Re-booted the machine.
"Error 11" "Hold down shift key to temp disable extensions".
OK, so I tried that. and it still gives me the same message... SO I took the card out. And it boots up fine. So it would seem that the issue is not the extension its the card, Right? Which is wierd because I have a FireWire Card in the top PCI Slot and it works fine. So I tried taking it out. And putting the USB Card in its place. No Luck there either.
When I boot back up without the card in and look under my extensions these USB related extensions are there.
USB Authoring Support 1.1.2
USB Device Extension 1.4.1
Mass Storage Extension 2.0.4
USB Mass Storage Support 2.0.4
USB Print Share 1.0.1
USB Software Locater 1.4.1
USB Support 1.4.1
This is all the Information I know to give you guys in here. I really hope someone can help me. My Frustration levels are going through the roof on this one. If Anyone does have a solution please be thorough. I know enough to work my way through stuff as long as I have all the info I need.... THANK YOU SO MUCH FOR ANY HELP YOU CAN OFFER!!!!
-Mike

Welcome Mike,
Just to shuffle a little bit of common confusion out the door: the "built-in, soldered to the logic board, remove it and the computer's dead" ATI 64-bit graphics chip common to all Beige G3s is identified as "ATImach64" in Apple System Profiler (ASP). The confusion comes from the fact that ASP thinks there must be a PCI slot for this darned thing and makes one up, although it usually gives it an "F" slot, which we don't have.
However, the fact that you're seeing it in the "B" slot sounds like something a CUDA reset (as suggested) will eliminate.
Newer Belkin USB cards at Staples have gone from the OPTI chipset (bad for Beige) to the NEC chipset (usually good). However, there may be problems if it has more than two ports. It could be power draw.
The total power available to the Beige's three PCI slots is 45 watts. Period. The only way to exceed this is for one or more PCI cards to have an external power tap that wires directly to the power supply wiring harness. The only card I've seen with external power capability and is Beige-compatible is an ancient Apple FireWire card. This thing is so old that it only supports cameras--no external drives.
I've been frustrated in finding out the power draw of ATI PCI video cards. So, for planning purposes, assume that any video card will pull 25 W. That means that the other two cards must draw less than 20W combined. For a long time, we have suspected some Belkin cards of drawing more power than other USB cards.
I have a Macally UH2-222 three-port card (two external and one internal) that is USB 2.0/1.1 compliant. Works great. It's now discontinued and its replacement (UH2-222) is a 4+1 port card--untested in the Beige G3. However, if you do a Google Mac search for "UH2-222," you can still find these around.
Keep plugging away. We seldom have people strike out around here.
Allan
[4112]

Html:link not working in struts project driving me mad, please help...

Afternoon all,
Can anyone help me with an issue I'm having with my first struts project, I'm learning as I go.
Anyway, I'm trying to create a bog standard hypertext link which passes a value back to a specified struts action. The flow of the application
is as follows:
1) search.jsp
User enters a name and postcode to search on, then click submit
2) searchAction
Struts action 'search' is called and does the search in a back-end db.
Each result found from search is created as a javabean (named resultsBean), and added to a list object. The list object is set as a request
attribute named 'SearchResults'.
The action is then forwarded on to another jsp page named results.jsp
3) results.jsp
The results.jsp page retrieves the list object from the 'SearchResults' attribute and loops through each entry
in the list and converts each entry to the 'resultsBean' javabean object.
Each resultsBean object has a getVirtualID method which stores a string value. This value is retrieved and a hypertext link is created which
passes this value on to another struts action named 'select'.
When this link is clicked on, the select struts action is called and the value passed as a parameter is retrieved.
This is the part I can't get to work, I can't get the link to render properly. When I click the link the select action retrieves
& lt;%= resultsBean.getVirtualID() & gt; as the value of the parameter 'vid' instead of the value stored in the getVirtualID method of the resultsBean.
Listed below is the code from my results.jsp page. If anyone can help me get this to work I would be very grateful.
Thanks in advance,
Alex
results.jsp code
<%
   List searchResults = (List)portletRequest.getPortletSession().getAttribute("SearchResults");
%>
<div id="table_layout" style="width: 713px; margin: 0px 0px 0px 3px;">
<div id="row">
    <div id="column"><img src='<%= response.encodeURL("/images/results.gif") %>' alt="" width="223" height="159" border="0" /></div>
     <div id="column" style="width: 30px;"></div>
     <div id="column">
      <div id="table_layout" style="width: 460px;">
        <div id="row" style="width: 430px; border-bottom: 1px solid #4e137d;">
          <div id="column" style="width: 155px;">Name</div>
          <div id="column" style="width: 10px;"> </div>
          <div id="column" style="width: 130px;">Address</div>
          <div id="column" style="width: 10px;"> </div>
          <div id="column" align="right" style="width: 120px;">References</div>
        </div>
<% if (searchResults.size() > 0) {
       Iterator it = searchResults.subList(0, searchResults.size()).iterator();
       ResultsBean resultsBean = new ResultsBean();
       while (it.hasNext()) {
            resultsBean = (ResultsBean)it.next(); %>
        <div id="row" style="padding: 5px 0px 10px 0px;">
          <div id="column" style="width: 155px;"><html:link styleClass="results" page="/select.do?vid='<%= resultsBean.getVirtualId() %>'" title="<%= resultsBean.getFullName() %>"><%= resultsBean.getFullName() %></html:link></div>
          <div id="column" style="width: 10px;"></div>
          <div id="column" style="width: 130px;"><%= resultsBean.getFullAddress() %></div>
          <div id="column" style="width: 10px;"></div>
          <div id="column" align="right" style="width: 120px;"><%= resultsBean.getReferenceIcons(portletResponse) %></div>
          <div id="column" style="width: 13px;"></div>
          <div id="column" style="width: 22px;"><input id="<%= resultsBean.getVirtualId() %>" name="ckbox" type="checkbox" value="" title="tick to select for merging" style="border: 0px solid #ffffff;"></div>
        </div>
<%     }
   } %>
       </div>
     </div>
</div>
</div>
<br />
<br />
<html:link forward="/searchpage">Return to search page</html:link>

If you have part of an attribute dynamic, you need to make the entire attribute an expression.
ie instead of
page="/select.do?vid='<%= resultsBean.getVirtualId() %>'"
it has to be
page="<%= "/select.do?vid=" + resultsBean.getVirtualID() %>"
However for my approach, I would aim for zero scriptlets, and use the struts tags even more. For instance instead of an iterator, use the struts logic:iterate tag (or the JSTL c:forEach>
Also instead of div tags, I would use html table tags - <table> <tr><td> etc etc. Thats what its for right?
Here is at least some of it rewritten with struts tags.
I left out the div tags so I could focus on the "important" stuff.
<logic:iterate id="resultsBean" name="SearchResults">
<html:link styleClass="results" page="/select.do" paramId="vid" paramName = "resultsBean" paramProperty="virtualId">
    <bean:write name="resultsBean" property="fullName"/>
</html:link>
<bean:write name="resultsBean" property="fullAddress"/>
<%= resultsBean.getReferenceIcons(portletResponse) %>
<input id="<%= resultsBean.getVirtualId() %>" name="ckbox" type="checkbox" value="" title="tick to select for merging" style="border: 0px solid #ffffff;">
</logic:iterate>I'm not entirely certain what you are doing with that checkbox at the end. They all have the same name, but no value. You couldn't identify at the server end which one was clicked.
Hope this helps some,
evnafets

V.8.0.2 is driving me insane! Help!

Hey, the latest update to iTunes is frustrating me to no end. As soon as I updated, my iPod got stuck in recovery mode and I lost everything on it. I had to use iTunes on my laptop to get it out of recovery mode. Then I went to iTunes on my desktop again (the one with v.8.0.2) and everything had been wiped. All my music, playlists, podcasts, apps - everything gone! I started to add back music to the library, exited iTunes for the night, started it up again in the morning and again - everything gone! Literally every time I start iTunes, it's like i've just installed the program for the first time. I've been going through this for like, 2 weeks now. And nothing I've tried works! Also, when I go to My documents >> My music >> iTunes folder, it's empty. No .xml or .itl file that I've seen so many people mention. Just empty. I seriously, seriously regret updating iTunes. Is there any way to go back to a previous version? Or does anyone have any clue at all how to fix this?

I didn't have this issue, but i did have to reset the settings on my Iphone, therefore losing my purchased songs. I got help from an apple expert and they told me to go into itunes, at the top under Store, click on "check for available downloads"
It found my old songs that were lost and added them back to my library..
Not sure if this will help your issue of losing your data but it helped me.

Airport Express (AX) not found after restart....driving me mad, please help...!

Hello,
I tried to search for this issue but never found the solution. In the meantime, it drives me mad......so please do respond if you know the answer.
Here is the problem. I have a WDS setup for our home, time capsule as base and several airport extremes (AX) for the wifi net through the house. In addition there is one AX for iTunes and I have one setup for the printer. Untill last week everything worked just fine. However, after installing a new printer, the printer AX blinked amber. I performed a reset and went through the setup, my AirPort Utility found it right away. I followed the steps for setting it up to join my current wireless network (usb printer). However, after the message: "The settings for this AirPort Express have been successfully updated. You can close this window or wait for this AirPort Express to restart" , the AX restarted, I finally got a message telling me there was an error joining my network. So I closed the ultility, resetted the AX and went through the process again. Unfortunately, the same result. Tried to connect the old printer, same result. Tried another AX, same result. Tried connecting it with a LAN cable, same result. It all goes fine untill right after the restart phase. NExt the AX is not recognized.
As nothing has been changed in the meantime, I have no clue at all what might be the problem. Anyone ????
Looking forward to the answer, untill now, I have not been able to find a solution.
Kind regards,
Mark

Mark,
I am having the same problem. I found this website, not sure if you have already given this a try.
http://adamantventures.com/blog/airport-express-setup-troubleshooting/

Driving me insane please help:O

Similar Messages

Maybe you are looking for