Drivnal - backup utility with web interface

Just finished adding package to AUR for an open source backup utility I'm working on. It has web interface and create's backups using rsync+hard links similar to Time Machine on OSX. There's a demo of the web interface and more info on homepage http://drivnal.com/ Still in development so there are a lot of bugs.

Hi Saurabh,
Please check your available device for backup, I think device is not active,
take help of OS support.
you can issue this command to check
#tctl -f /dev/rmt/0m status
#tctl -f /dev/rmt/0mn status
Please update this node, if your problem is solved.
Regards
Praveen Verma

Similar Messages

BR0229I Calling backup utility with function 'backup'...

Hi All,
I am having a problem with my backups. It is like the backup is hanging at step: BR0229I Calling backup utility with function 'backup'... as per the backup log.
Please help as this is preventing me from taking any backup including redo log backup.
OS: Windows
DB: Oracle
SAP: ECC5
Below is a copy of the backup log.
E:\oracle\PS1\origlogA\cntrl\cntrlPS1.dbf
BR0061I 105 files found for backup, total size 372323.979 MB
BR0143I Backup type: offline_force
BR0130I Backup device type: util_file
BR0109I Files will be saved by backup utility
BR0126I Unattended mode active - no operator confirmation required
BR0280I BRBACKUP time stamp: 2010-01-24 15.08.49
BR0307I Shutting down database instance PS1 ...
BR0280I BRBACKUP time stamp: 2010-01-24 15.09.25
BR0308I Shutdown of database instance PS1 successful
BR0280I BRBACKUP time stamp: 2010-01-24 15.09.25
BR0229I Calling backup utility with function 'backup'...
Regards
Jackson

Hi,
If You are performing backup using third party software, then Please check init<SID>.utl file to get more information about the parameters which BACKINT uses to communicate with your Third party Backup software utility.
Please execute the following commands and post the O/P.
brbackup -q
or
brbackup -i force -v <tape name>
Regards,
Bhavik G. Shroff

Deliver report to Content Store directly with web interface

Hi all,
We are currently implementing a system which will use XMLP as the letter/report/document producer. XMLP will be accessed from other applications (Siebel, EBS or else) using a preformatted URL so that the user will be in context of the report/letter directly. We would like the user to generate the report using the parameters in the XMLP web interface and when the report is ready, that there was only a "Send" button which would put the report in a temporary folder in a Content Store (Oracle Content DB). We would like to achieve that without the user having to input the destination of the file, like with a WebDAV or FTP. So we need to customize XMLP to remove the "Schedule" button and change the behavior of the "Send" button.
We would also need to be able to send the context of the creation of the report in order to be able to store it at the right place in the Content Store. In order to do that, we would pass an Id by a query string in the URL when calling the report. I know this information is stored in the XMLP_SCHEDULER_JOB table in the DELIVERY_PARAMETERS field so it must be accessible in the app as well. A BPEL process would be used to move the document to the right place.
So, 2 questions:
- Is it possible to change the behavior of the "Send" button? Has anybody done that?
- How can we save the context of the execution of a report to a file at the same time we are generating the report? (parameters used, template used, etc.)
Any clue, hint or helpful thought would be very appreciated!
Thanks!
Pierre-Yves

Hi MadhuSudan,
I couldn't find the EBS Delivery you are refering about. Is this something using the Concurrent Manager from EBS? If so, this is not what I am trying to do. I really want to give access to XML Publisher and save the output report the user has made with the parameters he used to create it in order to store it in a content store. XMLP will be accessed by EBS and Siebel through a URL.
I am curious to look at your java program and shellscript, could you send me a link to the URL where I can find the information you were refering to?
Thanks!
Pierre-Yves

Correct password doesn't work with Mail interface, but works with web interface.

Mail claims "The POP server “mail.nykayak.com” rejected the password for user “valerie”, yet when I log in through the web interface the password works. All other accounts work. Has anyone experienced this and found a solution?

Mackie, Welcome to the discussion area!
On your iMac G3, go to the AirPort menu and select the network name. It will prompt you automatically for the correct type of wireless encryption password.
I wouldn't trust selecting an option from Internet Connect.
In AirPort Admin Utility, what type of wireless encryption have you enabled? If it is WPA2 the iMac G3 won't be able to connect.
Also ensure that your AirPort Extreme base station (AEBS) is configured to work in an 802.11b compatible mode. The iMac G3 is only 802.11b.

Drilldown on BW report with web interface

I have a BW report that I deliver through our portal using web Templates and my question is if our user selects certain filter values can they then save their selections as a VARIANT much like they can do in BW Analyzer? This way the next time the come visit the report they can somehow bookmark their variant the way they previously ran it?
Thanks

I have not worked with the Portal, but if you right click a cell in the web report, you must be getting the BEx Context menu with options for drilldown, filter etc, right? On this menu you should be able to see an option for Bookmark. See if the last entry on the menu is Enhanced menu, and click that...more entries should open up.
Ref: http://help.sap.com/saphelp_nw04/helpdata/en/5d/53213c51febb2be10000000a11402f/content.htm
Hope this helps...

BR0231E Problem with Legato bACKUP utility

Hi,
I'm try to restore my database with brrestore and I'm get the following error:
BR0280I BRRESTORE time stamp: 2008-03-02 10.12.16
BR0229I Calling backup utility with function 'restore'...
BR0278I Command output of 'E:\usr\sap\DOP\SYS\exe\run\backint.exe -u DOP -f restore -i E:\oracle
\DOP\sapbackup\.rdxjtccy.lst -t file -p E:\oracle\DOP\920\database\init.off.DOP.utl':
BR0375E Backup utility has reported an error while restoring file M:\ORACLE\DOP\SAPDATA10\BTABI_
7\BTABI.DATA7
BR0280I BRRESTORE time stamp: 2008-03-02 10.16.24
BR0279E Return code from 'E:\usr\sap\DOP\SYS\exe\run\backint.exe -u DOP -f restore -i E:\oracle\
DOP\sapbackup\.rdxjtccy.lst -t file -p E:\oracle\DOP\920\database\init.off.DOP.utl': 2
BR0374E 0 of 1 file restored by backup utility
BR0280I BRRESTORE time stamp: 2008-03-02 10.16.24
BR0231E Backup utility call failed
I' have windows 2003 + SAP 4.7 Oracle 9.0.2
Please help
Edited by: Luis Minaya on Mar 2, 2008 3:55 PM

Hello,
Legato log files might tell you more about the root cause.
And here's just a guess: Files permissions have to be considered as well. Did you do backup and restore as the same operating system user? If users are different, then different permissions may be a problem.

CKF in bps_wb (Web Interface)

Hey All-
I know with Enhanced layouts you can create calculated key figures based off of exsisting measures that you have in your planning area. I'm using Web Interface (bps_wb) and I don't see where I can create CKF. Is this even possible with Web Interface?
Please advise.
Thanks,
nv

Hi,
in Web Interfaces you cannot use any CKF's; this works only in web templates or workbooks based on the Integrated Planning.
But you can use calculations (but only summation) in the layout customizing of BPS.
Regards, Clemens

Oracle11g: Problem in web interface

Hi,
I have a problem with web interface.
I obtain this result as status of dbconsole:
>
C:\Documents and Settings\Administrator>emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://WS2003ORA:5501/em/console/aboutApplication
Oracle Enterprise Manager 11g is not running.
I tried this:
>
C:\Documents and Settings\Administrator>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://WS2003ORA:5501/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...Requested service already running.
In the emdctl.trc file I find these lines:
>
2009-04-16 17:59:56 Thread-3604 WARN http: snmehl_connect: connect failed to (WS2003ORA:5501): Impossibile to establish a connection. Persistent deny of the destination host.
(error = 10061)
2009-04-16 18:00:34 Thread-2396 WARN http: snmehl_connect: connect failed to (WS2003ORA:5501): Impossibile stabilire la connessione. Rifiuto persistente del computer di destinazione.
(error = 10061)
2009-04-16 18:01:13 Thread-3864 WARN http: snmehl_connect: connect failed to (WS2003ORA:5501): Impossibile stabilire la connessione. Rifiuto persistente del computer di destinazione.
(error = 10061)
2009-04-16 18:01:48 Thread-2548 WARN http: snmehl_connect: connect failed to (WS2003ORA:5501): Impossibile stabilire la connessione. Rifiuto persistente del computer di destinazione.
(error = 10061)
2009-04-16 18:02:27 Thread-3356 WARN http: snmehl_connect: connect failed to (WS2003ORA:5501): Impossibile to establish a connection. Persistent deny of the destination host.
(error = 10061)
I try to reconfigure the db with dbca but when I click finish I receive a message tells me that it does not exsist a configuration of the db.
How can I solve?
Thanks, bye bye.

Hi,
I do not know how but now the web interface works but I have a problem in the web console I see, as server host, a wrong ip, how can I change this ip?
I open the web console with this url: https://192.168.132.128:5501/em/console/
but when I try to execute some modify to the db through the interface I receive a login request and the connection string is: 92.168.223.128:1521:ws2003 where the ip is wrong! So I cannot connect to the db.
How can I change the ip?
Thanks, bye bye.

Range of Variable in Web Interface Builder

Hi,
I have created a Web Interface Builder in BW-BPS. I have created Cost Center as a Variable. However, I am unable to get this range of cost centers say 1001 to 1005 in Web Inteface Builder.
Whereas, in the Planning Folder, this works fine and I am able to select the range of Cost Centers from 1001 to 1005.
The issue is only with WEB INTERFACE BUILDER.
Looking forward for some valueable inputs.
Regards,
Ravi

Hi Mayank,
Thanks for your reply.
I will also look at the different options given.
I also found the following thread is more useful.
BSP Value Help Input Field and Select-Options Ranges
I will let you know on this.
Regards,
Ravi

Performance Problems with Web Layouts in web interface

Hello Gurus,
We have a a BPS web interface tool which has the following design:
1> A web interface with several tabs
2> Each tab has around 3-4 input layouts which are dependent on each other
3> In all there are 120-140 layouts that the tool uses...
My questions were in term of performance
1> Is there a limit to how many web layouts you can use per page/tab/view or if SAP recommends specific number of web layouts per page/tab/view ?
2> If there is a limitation...our intention was to convert all the display layouts into BW reports so as to increase the performance of the tool....
3> Would like to know the restriction on the number of users who can log into the tool as a specific point of time ? We may have 50-60 minimum using this tool.
I would appreciate your help in this regard.
Thanks in advance

Hello Rashmi,
Have you got a chance to look at the performance guide and SAP notes on BPS performance. If not here are the details
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/documents/a1-8-4/performance guide - sap sem bw bps.pdf
Enclosed are the few SAP notes related for improving performance.
358921 - Oracle database parameterization for SEM
459897 - SEM-CPM: Performance when reading transaction data
566713 Required information for the analysis of performance problems
560369 - Proposals BW aggregates for SEM-BPS
180605 - Oracle database parameter settings for BW
124361 - Oracle parameterization (R/3 >= 4.x, Oracle 8.x / 9.x)
358529 - Overview of performance notes
350011 - Technical performance: Using the business content
340246 - Techn. performance: Overview of statistics
417091 - Optimize execution time of planning functions
Some of them are Oracle specific, ignore them if you are not oracle database. Hope this helps.
Thanks,
Praveen
PS.Dont forget to reward points

How to call a BPS Web Interface with predefined selections

Hi,
I have read and try to implement the "How to... call a BPS Web Interface with predefined selections" but it is not working.
I have one Web Interface called ZXXXXX, then I created one BSP and copied the ABAP code into the Layout screen.
I checked the ABAP and it concatenates and fill the variable l_url, but the page is not displayed.
l_url = /sap/bc/bsp/sap/zxxxxx/zxxxxx.htm
I have checked that I have no errors in the BPS variables and its values.
It just opens internet explorer and the page displays "<<<" in the top of the screen.
I am working with BW7.0 and BPS 3.5.
If anyone can help me it will be rewarded,
Thanks a lot,
Fernando

I think the problem is in the last part of the code.
<frameset framespacing=0 frameborder=0 border=0>
<frame src="<%= l_url%>" name="x" framespacing=0 frameborder=0 border=0
marginwidth=0 marginheight=0>
</frameset>
It is doing nothing in this point, but the ABAP fills correctly the l_url variable.
Thnks

Web Interface u0096 Characteristic u0093not indicated with comment facilityu0094.

Using the Wizard, I have created a Web Interface based on a working Planning Folder.
When I attempt to generate the Web Interface, I get the following error message :
Characteristic ( name assigned to the Web Interface ) is not indicated with comment facility.
Performance Assistant instructs me to Indicate the characteristic as commentable. You make this setting with the transaction UIBW.
No processing occurs. There is no online help to explain this further, and transaction UIBW is unknown.
I can Display Preview the Web Interface, although I do get a pop-up indicating that there is No executable version available and allowing me to set up Dynamic Preview. The results Preview results are consistent with those reflected via the SAP GUI layout.
Has anybody experienced this before ? Have I missed a step ? Any insight or help is greatly appreciated !
Thanks,
Lyle

Hi Lyle,
1) It must be understood that the Message points to the characteristic that you "somehow selected" before this error message came up.
2) Please make sure that the Characteristic which you tried to change/set property ("before error message flashed") has document property activated and is not compounded.
3) When the InfoObject is compounded, you need to activate the document property of the "InfoObject(s)" listed in the last tab of InfoObject Maintenance (Compounding tab)
4) I was able to find out one OSS Note which describes the point (2) and (3). You could also check out and justify if it is applicable to your SEM-BW Version.
OSS Note Number - 580581
5) What you could also try is to create a document manually to make sure things are OK!
5.1) Execute the TA - UIBW or RSD3 and enter the Characteristic.
5.2) Select the Menu entry "Jump->Documents".
5.3) Create a simple document and save things.
I am not sure whether you would mind sending me the screen shots ( Screenshots embedded in PPT or WORD, Zipped?) of Object property (Characteristic which caused all this), characteristic adminstration tabs, compounded characteristics administration tabs at [email protected] (Only when the above points dosen't help you out)
Thanks and waiting for your feedbacks!
Good Luck!

"own checkboxes" in Web with Table Interface?????????u00DF

Hi to all experts,
i have the following scenario:
I am using a query in web. Well in the lines there is a characteristic (for example sales org) and in the columns a keyfigure with an exception and a top10 condition. I think exception and condition are not important for my problem but the table is. Now i want to see in front off all lines a checkbox. That means i have - for example - now 10 sales organizations in my query and in front of all sales orgs there should be a checkbox. I think that should be realized with table interface. Now the user should be able to mark two ore more checkboxes to jump with the Report Report Interface by using a link to another Web report? Is that possible? Sounds hard i think or isnt it?
Regards,
M. Erbil

Hi Memo,
try the following. Create a template with a web item table. Than by using se24 create your own class for table interface. Change method DATA_CELL.
method DATA_CELL.
*CALL METHOD SUPER->DATA_CELL
EXPORTING
 I_X =
 I_Y =
 I_VALUE =
 I_DISPLAY_VALUE =
 I_NUMERICAL_SCALE =
 I_NUMERICAL_PRECISION =
 I_CURRENCY =
 I_UNIT =
 I_ALERTLEVEL =
 I_IS_SUM =
CHANGING
 C_CELL_ID =
 C_CELL_CONTENT =
 C_CELL_STYLE =
 C_CELL_TD_EXTEND =
data: l_cell_content type string.
if i_x = 2 and i_is_sum <> 'X'.
 concatenate l_cell_content '<INPUT type=checkbox value=ON name='
 '' filter '' '>' into
 l_cell_content.
 c_cell_content = l_cell_content.
endif.
endmethod.
You can hold the value from characteristic in method CHARACTERISTIC_CELL:
method CHARACTERISTIC_CELL.
*CALL METHOD SUPER->CHARACTERISTIC_CELL
EXPORTING
 I_X =
 I_Y =
 I_IOBJNM =
 I_AXIS =
 I_CHAVL_EXT =
 I_CHAVL =
 I_NODE_IOBJNM =
 I_TEXT =
 I_HRY_ACTIVE =
 I_DRILLSTATE =
 I_DISPLAY_LEVEL =
 I_USE_TEXT =
 I_IS_SUM =
 I_IS_REPETITION =
 I_FIRST_CELL = RS_C_FALSE
 I_LAST_CELL = RS_C_FALSE
 I_CELLSPAN =
 I_CELLSPAN_ORT =
CHANGING
 C_CELL_ID =
 C_CELL_CONTENT =
 C_CELL_STYLE =
 C_CELL_TD_EXTEND =
data: l_filter type string.
Store characteristic value of current row
if i_x = 1 and i_is_sum <> 'X'.
l_filter = i_chavl.
endif.
endmethod.
Please note that "i_chavl" holds the key value from characteristic.
Now back to method DATA_CELL and insert something like this:
filter = l_filter. "l_filter is set in method characteristic cell
so it look like this:
method DATA_CELL.
*CALL METHOD SUPER->DATA_CELL
EXPORTING
 I_X =
 I_Y =
 I_VALUE =
 I_DISPLAY_VALUE =
 I_NUMERICAL_SCALE =
 I_NUMERICAL_PRECISION =
 I_CURRENCY =
 I_UNIT =
 I_ALERTLEVEL =
 I_IS_SUM =
CHANGING
 C_CELL_ID =
 C_CELL_CONTENT =
 C_CELL_STYLE =
 C_CELL_TD_EXTEND =
data: l_cell_content type string,
 filter type string.
if i_x = 2 and i_is_sum <> 'X'.
filter = l_filter.
 concatenate l_cell_content '<INPUT type=checkbox value=ON name='
 '' filter '' '>' into
 l_cell_content.
 c_cell_content = l_cell_content.
endif.
endmethod.
Hope it works
Regards,
Adem

Web Service u0096 IDOC with acknowledgement interface

hi experts,
for this scenario do i need to use ccBPM??
Web Service IDOC with acknowledgement interface.
because we need response from idoc and idoc supports asynchronous processing.

hi,
yes you need to use a BPM if you want to use
acknowledgment to a web service from IDOC interface
more on IDOC can be found in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Help me backup my G4 with OS 9.1 -- is there an easy backup utility?

Hi all,
My old Mac G4 is teetering on death, and I just want to get one good backup before it dies... I've been using Retrospect Express, attempting to backup to a Acomdata firewire hard drive (300 GB). What happens is that I get a crazy set of data files (150 of them, at 2 GB each) which fill up my entire firewire drive. The original data totals +less than 120 GB+, so I don't know what's going on. I've posted a question on the Retrospect forum, but so far have not gotten any responses.
My question for you is, is there an alternate backup utility I can use for Mac OS 9.1? I'd love to find something similar to what I use to backup my MacIntel with Tiger:
http://www.shirt-pocket.com/SuperDuper/SuperDuperDescription.html
This company doesn't seem to offer anything for OS 9.
Here are my specs:
Mac G4, OS 9.1
Retrospect Express Backup, Version 5.1.175
I have two internal hard drives, one with three partitions, one with two partitions. The two drives together equal about 120 GB. I'm trying to back up to an external hard drive -- Acomdata USB 2.0 & Firewire 400 drive (300 GB).
I've reformatted the external hard drive with Mac OS Extended Journal, and have examined it for errors, and it appears to be fine.
Any suggestions?
Thanks!

Hi, tunewizardry -
As I understand it, if I simply copy over the internal drives in the way you described, I wouldn't actually be able to use the applications from the backup disk. Is this right?
Not exactly.
Some OS 9 apps install support files of some kind in the System Folder for the OS running the machine at the time of installation. Many others don't - and those that don't will run quite well regardless of where the OS is that is used to boot the machine.
However - by copying the entire hard drive over to the backup drive, you also capture the System Folder for OS 9 which you've been using as the boot OS. This means it already has copies of any support files needed by an application also copied to the backup drive.
Unlike OSX, an OS 9 System Folder is usable after a simple Finder copy (drag and drop) process. Provided your machine is firewire bootable, you can use the copied OS to boot the machine.
All you need do to make the System Folder usable that way after copying the entire drive is to move the System Folder out of the folder it was placed in, so that it is at the root level of the drive; and also move the Documents and Applications (Mac OS 9) folders out of the folder to the root level of the drive. The root level of the drive is what you see when you first open the drive's icon.
You may also need to "fix" a few aliases, since the pathname in them will not be changed. If you do a Get Info on an alias's icon, there's a Select New Original button presented - use that to reset (fix) the alias so it is linked to the proper original now on the backup drive. These aliases can include one to Sherlock in the Apple Menu Items folder in System Folder; perhaps a few folder aliases in the Application Support folder in System Folder;and perhaps a few others you may have created for your own use.
Once you've done that, you not only have a backup of your data, you also have a backup boot drive with a full array of data files and programs.
One other advantage of doing a full drive backup is that you also capture anything left lying around on the desktop, and anything left in the Trash. Each of those sets will be placed in separate folders, named Desktop and Trash respectively, in the folder created by the copy process on the backup drive (the folder named the same as the original drive).
Typically that's the way I install an OS initially on a firewire drive (unless it's OSX) - copy my known good and complete System Folder from my primary drive to the firewire drive. Without exception they have always been bootable immediately.
About using a firewire drive for booting - speed is a bit slower than an internal drive, but not slower than a CD. As far as selecting it for booting goes, the easiest way to do that (especially if your primary drive has just cratered) is to use Startup Manager to select it during the boot process.

Drivnal - backup utility with web interface

Similar Messages

Maybe you are looking for