DRM Activation Error "Number of activations exceeded" (Android reader)

I received this error "Number of activations exceeded" when entering in my Adobe ID in my Android device. I have owned several Android phones and tablets and probably have activated on all of them over the years. How do I reset the activations? Thank you.

It is a vicious cycle. I spoke with two different people by phone (no chat is available that I could find, nor an email address0. The first person said they could not help after keeping me on the phone 20 minutes. I called again and after speaking to two people, my "case" was referred to the Diginal Editions department and someone will contact me within 24-48 hours. No contact so far 30 hrs later. This seems to be a frequent issue according to these forum comments, but Adobe does not seem very customer sensitive or efficient in resolving these fairly simple issues.

Similar Messages

Activation error: Printer not activated, error code 20

I have had my officejet 4215 all-in-one printer well over a year and it has connected and printed whatever I wanted. Yesterday when I wanted to print an email it would not and the following box popped up: Activation error: Printer not activated, error code 20. Then the next box that popped up said: Printer Error An unknown error occurred while printing.
If I copy the email over to a Microsoft Windows page, then i can print it fine.
Any idea how to fix this so I can print email's like I used to?
Rey

What operating system? What email program are you trying to print from?
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Imessage activation error occured during activation try again.

I have updated my new itouch and have tried to activate imessage. I enter my apple accouont and each time I receive the message that an activation error occured during activation try again. I have tried again and again and am at my wits end. Any ideas or help would be appreciated .

I was able to use imessage before having a trip overseas. Then after setting my Date & Time to manual, my imessage could not be activated. I have tried to get a new Apple ID and got it verified. Still it doesnt work for me. Until I read the link http://imbyter.com/2012/01/cannot-activate-imessage/ and changed my Date & Time to automatic, then magic occured

Impdp error number of bytes exceeds limit of varchar2

Hi,
I have a problem migration data from one database with western Europe character set to a new database with UTF-8 charter set. I know that this has to do with some characters using more then one byte in UTF character database. But as I have one column varchar2 is configured with 4000 byte as limit and imp reports error as some rows exceeds 4000 and actual requirement is 4009 byte which is not possible as limit of varchar2 is 4000 byte.
I need to identify the rows that exceed 4000 byte.
Changing datatype is not an option.
Anyone have any ideas on how to identify the rows that exceeds 4000 bytes or anyone have a query that makes it possible to query existing environment with all rows above 3980 byte in this one column?
Regards
933746

JohnWatson wrote:
The csscan Character Set Scanner utility will report all the rows that will be damaged by the character set change (though you'll have to fix them yourself), it is described in the Globalization Support Guide.Thanks I'll look into it.
I haven't run csscan on this database but ofc on all others :)

SAP Best Practices - Error during the activation of Baseline Package

Hello,
I don´t know if this is the right forum to post this message, but I posting here as i didn´t get the info from the related forum, apologies for that.
During the process of activation the Baseline Package 603V8 on ECC6.0 EHP3 (I´m importing all scenarios) from solution builder (txcode /n/smb/bbi)... it stopped and it shows me the following error:
Start activation BC Set: /SMBA0/V_T001P_B0BN_J01
Not activated - error
End of activation BC Set: /SMBA0/V_T001P_B0BN_J01
Can someone help me solve this problem?
Thank you
João Dimas - Portugal

Hello again,
I already solved this specific issue that I reported in my previous message, I did the manual activation (txcode SCPR20) of that BC Set: /SMBA0/V_T001P_B0BN_J01 guided by the document "SAP Best Practices Tools". After this activation I pressed the Change button that is displayed in the Old Status column and I changed the status to successful, after I chose the Activate to continue with the installation. But, once again, other error stopped the installation, now with other BC Set:
/SMBA0/V_T001L_B175_J0A
I tried to solve with the same method through the manual activation, but now it was not possible, when I do that in SCPR20 the activation logs show me four warnings (see the image "BC Sets: Activation logs")... and I don´t want to continue with activation/installation of the full scope without solve this issue or can I continue?!
Can you help me please?
Thank you,
João Dimas - Portugal

Max number of items exceeded?

I am trying to develop a questionaire like application. Most of the logic is stored inside pl/sql functions (that is retrieving the previous or next question with possible answers and answer-types, like, eg. radiogroup, select-list, textarea, ...) while all of the questions and respective possible answers are kept inside a collection. In processing the answers after submit I store given answers inside the same collection, basically by nullifying all possibly previously given answers for the current question and then looping through eg, g_f01.count to refill. The entire application remains on the same page, showing eg., in one 'frame', one or two questions with say 7 checkboxes and two textareas.
Everything seems to work fine, I can go forward and backward and will find new questions or ones that already have been answerd, but!!...
after the 50st item (answer), that is after I reached the 50st radiogroup, checkbox or textarea, new checkboxes or radiogroups even though shown the resulting values will not be stored inside the collection anymore.
generating the page i use:
htp.prn(apex_item.radiogroup(p_idx => 1, p_value => c2.a_id, p_selected_value => c2.qa_id, p_attributes => 'id="P2_QUEST_' || i || '"'));
and in processing correspondingly ...
FOR i IN 1 .. apex_application.g_f01.COUNT
LOOP
FOR c2 IN
(SELECT seq_id,
c001 q_id,
c002 a_id,
c012 qa_id
FROM apex_collections
WHERE c001 = to_char(p_q_id)
AND collection_name = 'ANSWERS'
AND c002 = apex_application.g_f01(i))
LOOP
apex_collection.update_member_attribute(p_collection_name =>
'ANSWERS', p_seq => c2.seq_id, p_attr_number => '12',
p_attr_value => c2.a_id);
END LOOP;
END LOOP;
to me I only use f01 ... f04 say, ... Is it possible that I still hit the max of 50 page-items?
Regards
j.

max number of items exceeded?

I had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help

i had earlier installed adobe dreamweaver cs3 on windows 7 my system got crashed, we have changed the hardware installed win 8.1 now dreamweaver is giving activation error exceeded activation limit please help

Hello,
what concerns your wish about an uinstaller, so you should use
https://helpx.adobe.com/creative-suite/kb/cs3-product-downloads.html >>> AND note this "Read before you download a CS3 product". And esp, "You need your CS3 serial number to complete the installation" but this shouldn't be a problem for you, because you had an official version and so you can use all these informations like https://helpx.adobe.com/x-productkb/global/find-serial-number.html
Hans-Günter

PO: Error number 3 - Failed Activity: Does Approver Have Authority?

Hi,
I know, this is old known error, but I cannot resolve the problem. Many solution I have read a applied, but some workflows still shows: error number 3.
1) user was notified by this:
Document Manager Failed With Error Number while processing Standard purchase order 50025512
2) error shows this error:
Workflow Errors: XXK_POAP, 116384-269277, 50025512
Failed Activity XXKDoes Approver Have Authority?
Activity Type Function
Error Name 1
Error Message User-Defined Exception
Error Stack Wf_Engine_Util.Function_Call(XXK_PO_WFS3Z.XXK_VERIFY_AUTHORITY, XXK_POAP, 116384-269277, 204044, RUN)
Yes, there are customizations.
3) for errored workflows the debug table shows this:
for example:
FUNCTION = fnd_trn_pipe.get_manager
ACTION = 1|No manager defined
RESPONSIBILITY_ID = 20420
RESP_APPL_ID = 0
eBS 11.5.10.2 runs on Win 2003 server.
Thanks.
Audun
Edited by: Audun on 22.2.2012 12:46

The error that appears is a generic error.
But the activity that is erroring out is "XXKDoes Approver Have Authority" is an customized one..
Can you ask your technical engineer to reivew the events associated with the activity, to troubleshoot further.
If you want to confirm, whether the issue is arising out of oracle code - you can forceload the workflow and then retest the issue.
If it still errors - you can ask "oracle Support" to assist.

HT2693 it said activation Error,and i can't get in and see my serial number. what can i do?

it said activation Error,and i can't get in and see my serial number.

Hi tristanbolo,
Thanks for visiting Apple Support Communities.
If your iPad mini powered off unexpectedly and will not power on, try these steps, which apply to the iPad mini as well:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Best,
Jeremy

Adobe DRM Activator error (server code 24)

I updated to the most recent version of digital editions, but uninstalled it due to the fact that it does not support Palm.
I reinstalled the old version of Adobe Reader 7.0. All of my ebooks show up, but when I try to transfer my ebooks to my Palm I receive an error message stating:
Your Adobe software cannot be activated.
A bad session ID was used in the header.
Eden Info: (0x18) A bad session ID was used in the header.
Soap Info: Client: A A bad session ID was used in the header.
Adobe DRM Activator error (server code 24).
Fault location: 12
Contact customer support.
The knowledge base states that Adobe is aware of this issue and I have to contact support.
I uninstalled and reinstalled the program a couple of times but I had the same error message.
I have open two open web cases (#0180655783 on 1/8/09 and #0201592044 on 12/22/09). They both state: "open pending response from Adobe", but I can't get a response (although my case do note that they have been updated???).
When I contacted Adobe via phone they informed me that I could only get assistance by opening a web case. I was assured that I would get a response within 24 Hours! What a bunch of crap!
I really have to have access to my ebooks. I have quite a lot of money invested in books that I cannot access. Some of them I need
for school.
Please HELP!
Operating System: Windows XP Home
Browser: Microsoft IE

well I'm guessing this isn't a question about Adobe Digital Editions 1.5.. I'm guessing your using some older version of Acrobat Reader, yes?
Please post your ebook reader version, and also do you happen to have a Palm device?
Regards,
Bentley Wolfe
Senior Support Engineer, Flash/Flash Player/Digital Editions
Adobe

Can't transfer my ebooks to my nook get error msg E_ACT_TOO_MANY_ACTIVATIONS - Activation limit exceeded worked fine 2 weeks ago.

Can't get my ebooks to transfer over to my Nook. reoccurring problem worked 2 weeks ago Got this error msg
E_ACT_TOO_MANY_ACTIVATIONS - Activation limit exceeded Previously I have gotten it fixed with a remote chat from Adobe today no help from them.

This is the Reader forum. You should ask in the Digital Editions one,
http://forums.adobe.com/community/adobe_digital_editions

ADE won't let me read DRM books - 4.0 crashes when opening library books (EVERY. SINGLE. TIME) so I installed 3.0 and now I get an "activation error". I have it authorized to my ID....WHERE IS THE STAFF TO ANSWER QUESTIONS?!?!?!?!?!?!?!?!?!?!?!?!?!!?!?

Working on a MAC with a Kobo. ADE won't let me read DRM books - 4.0 crashes when opening library books (EVERY. SINGLE. TIME) so I installed 3.0 and now I get an "activation error". I have it authorized to my ID....WHERE IS THE STAFF TO ANSWER QUESTIONS?!?!?!?!?!?!?!?!?!?!?!?!?!!?!? I have wasted hours on this and I'm getting really annoyed.

Thank you! This worked. But now I copied my files back, which was successful. But the last file did´t work. I even loaded this file from the bookstore. When I try to load this file, ADE crashes and gives me the following report:
Process:               Adobe Digital Editions [1042]
Path:                  /Applications/Adobe Digital Editions 4.0.app/Contents/MacOS/Adobe Digital Editions
Identifier:            com.adobe.adobedigitaleditions.app
Version:               4.0.3 (1)
Code Type:             X86-64 (Native)
Parent Process:        ??? [1]
Responsible:           Adobe Digital Editions [1042]
User ID:               501
Date/Time:             2015-03-17 17:24:50.622 +0100
OS Version:            Mac OS X 10.10.2 (14C1510)
Report Version:        11
Anonymous UUID:        39575296-9512-7D9E-6037-5A7F3189509D
Time Awake Since Boot: 3000 seconds
Crashed Thread:        0 Dispatch queue: com.apple.main-thread
Exception Type:        EXC_BAD_ACCESS (SIGSEGV)
Exception Codes:       KERN_INVALID_ADDRESS at 0x0000000000000020
VM Regions Near 0x20:
-->
    __TEXT                 000000010fa2d000-0000000110299000 [ 8624K] r-x/rwx SM=COW /Applications/Adobe Digital Editions 4.0.app/Contents/MacOS/Adobe Digital Editions
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   com.adobe.adobedigitaleditions.app 0x000000010ff7ff1f uft::Value::inlineSet(uft::Value const&) + 7
1   com.adobe.adobedigitaleditions.app 0x000000010ff74e54 uft::Value::operator=(uft::Value const&) + 14
2   com.adobe.adobedigitaleditions.app 0x000000010fbcbdbc css::StyleHandler::verifyXMLStylesheetTree(mdom::Node const&) + 300
3   com.adobe.adobedigitaleditions.app 0x000000010fbc868d css::StyleHandler::processXMLStylesheet(uft::URL const&, mdom::Node const&, uft::String const&) + 227
4   com.adobe.adobedigitaleditions.app 0x000000010fbc8586 css::StyleHandler::resourceDownloadComplete(mdom::Node const&, uft::String const&, uft::URL const&, uft::String const&) + 142
5   com.adobe.adobedigitaleditions.app 0x000000010fcef047 pxf::ResourceStreamReceiver::bytesReady(unsigned long, dp::Data const&, bool) + 207
6   com.adobe.adobedigitaleditions.app 0x000000010fcc84cf rmsdk::zip::ZLibDecompressorStream::bytesReady(unsigned long, dp::Data const&, bool) + 683
7   com.adobe.adobedigitaleditions.app 0x000000010fca66b0 package::AESZipDecryptor::bytesReady(unsigned long, dp::Data const&, bool) + 576
8   com.adobe.adobedigitaleditions.app 0x000000010fcc71e6 rmsdk::zip::ZipEntryStream::bytesReady(unsigned long, dp::Data const&, bool) + 34
9   com.adobe.adobedigitaleditions.app 0x000000010fcc7151 rmsdk::zip::Entry::bytesReady(unsigned long, dp::Data const&, bool) + 235

Adobe DRM Activator error (client code 31); HTTP code 404. Fault location: 15

dear all,
a few years ago I installed and configured Adobe Digital Editions. I bought some ebooks as well. Meanwhile I have switched my computer. And today I discovered my ebooks. I clicked on them and the system tells me that I have to install ADE and to activate the computer. So I successfully downloaded ADE installed it and activeated it.
ADE immediately shows me all the books I bought years ago. Then I clicked on the books I wanted to read. A window popped up which told me that the book is no more available - due to a changed path. I found no possibility to change an existing ADE configuration.
I opened ADE and added a book I bought by opening the option to add a file and openend the ebook on its new location. The ebook was loaded, authorized and I could read it. Clever - I thought. Thats the way to clean up my library. First lets delete all the ebooks in the library with the broken location. Afterwards lets add it via the option to add ebooks. Thats what I did. I deleted all the ebooks first. Afterwards I wanted to add all the books like I already did it with the first one. But - I no more could do that!
This is what I get:
Your Adobe software could not be activated. HTTP error on Adobe DRM Activator request. Adobe DRM Activator error (client code 31); HTTP code 404. Fault location: 15
Does this mean that ADE server does no more authorize my bought ebooks after I had deleted the broken-link-ones from my library?
I hope not ! - This would be awfull - all my books would be gone !!
I hope someone could follow my problem description and hope that there is a simple solution for that.
Thanks,
D.

THIS FORUM SUCKS
NO RESPONSE. MY FIREWALL IS OFF, NO PROXY NO VIRUS SCAN AND DRM CRAP SPITS THIS ERROR OUT...
C___Primer_Plus.pdf:
Adobe DRM Error
System: 9
State: 4
Class: 20
Code: 31
Message:
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 500
Fault location: 20
--- end ---
ADOBE HIGHWAY ROBBERY.

Errormessage: "Number of activations exceeded" though I only use 2 devices.

errormessage: "Number of activations exceeded" though I only use 2 devices.
Thank your for helping me with this issue.
I had to reset my mobile phone and my tablet and now this message appears on my mobile phone:
"Number of activations exceeded" though I only use 2 devices.
I use Mantano reader premium.
Kind regards,
Regula

Thank you Dominic, unfortunately your link does not give me the exact help
what to do next.There are only some general links.
Somewhere in the forum I found this:
. If you reach the limit,
contact Customer Service to increase your allowable activations. Please
let us know if these will help in resolving your issue.
Is there an emailadress to contact, sinI am at work and can't chat.
Thank you and kind regards,
Regula
2014-02-17 7:41 GMT+01:00 Dominic Michael <[email protected]>:
Re: errormessage: "Number of activations exceeded" though I only use
2 devices. created by Dominic Michael<http://forums.adobe.com/people/Dominic+Michael>in *Adobe
Digital Editions* - View the full discussion<http://forums.adobe.com/message/6127568#6127568

Adobe DRM Activator error Client Code: 31 - HTTP Code: 500

a few years ago I bought a "C++ Primer" programming book from Amazon. The book is no longer downloadable from Amazon... the DRM version has gone to some other DRM format. THIS IS MY FIRST AND LAST DIGITAL DRM BOOK.
I have not been able to read it although I shelled out a whoppy $45.00 USD. Adobe Digital Edition is stupid and find it awkward to use. I found one copy of the book on my old laptop that appears to be not corrupt. I'm now trying to read it from my desktop (its a 23 inch screen. Adobe suppport SUCKS, I've been at trying to open this DRM book for several Years now. The last time ADE kept kicking back "No internet connection" when I clearly have a one.
Now I'm getting this error pasted from ADE after adding the book to my library (<---stupid term for this but it is what it is). I JUST WANT TO OPEN THE BOOK I PAID FOR. I'm suppose to be able to open this book on SIX different PCs...WTF
C___Primer_Plus.pdf:
Adobe DRM Error
System: 9
State: 4
Class: 20
Code: 31
Message:
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 500
Fault location: 20
--- end ---

THIS FORUM SUCKS
NO RESPONSE. MY FIREWALL IS OFF, NO PROXY NO VIRUS SCAN AND DRM CRAP SPITS THIS ERROR OUT...
C___Primer_Plus.pdf:
Adobe DRM Error
System: 9
State: 4
Class: 20
Code: 31
Message:
Your Adobe software could not be activated.
HTTP error on Adobe DRM Activator request.
Adobe DRM Activator error.
Client Code: 31 - HTTP Code: 500
Fault location: 20
--- end ---
ADOBE HIGHWAY ROBBERY.

DRM Activation Error "Number of activations exceeded" (Android reader)

Similar Messages

Maybe you are looking for