DRM content and mini display port

Is it (or will it be) possible to broadcast DRM content from a mac to a digital display/TV through the mini display port? (eg from Mac through MDP/HDMI cable to display/TV)

I haven't been able to get a definitive answer on this from anyone. Apple's not talking. And until someone makes a MDP to HDMI adapter, it'll probably remain a mystery.
See this forum discussion for more info: http://discussions.apple.com/thread.jspa?threadID=1752838&tstart=45

Similar Messages

Blue Screen and Mini Display Port Screens

I have a Macbook Air 2011 model, it will connect fine to any Thunderbolt displays but as soon as it's plugged into a screen with the mini display port connector, the laptop will get stuck on a blue screen until it's disconnected, and as far as I know it should be compatible with both types
Usually a PRAM reset will resolve it, but it hasn't and attempted an SMC reset plus a Firmware update, no change either
What else can I try?

Welcome to Apple Discussions
If you experience a black screen, or otherwise have an unusable picture after changing to some resolutions, try resetting the NVRAM first.
If you continue to experience the issue, startup the Mac in Safe Mode. Delete the /Library/Preferences/com.apple.windowserver.plist file and restart the Mac.
If the problem persists you may have a bad adaptor.

Can the 4870 run the dvi and mini display port simultaneously???

basically id like to get a dvi to hdmi converter and use plex on my mac pro, but i also have an apple cinema display connected via mini display port,
are there any problems to me using both outputs on the graphics card?

thank you martin!! i can go ahead with my plans then

Problem with mac pro 2x2.93 GHZ Dual Core and Mini Display Port

Finally I see the button to create new post!
I would like to explain a problem I have with my mac pro 2x2.93 GHZ Dual Core Intel Xeon processors and the ATI Radeon HD 4870.
I have two 30 "Apple. After buying the new Mac Pro is one of the two monitors, only with the monitor all black, small horizontal lines.
This happens only to the monitor connected to the mini display port... So if you reverse it monitors the problem always moves on the board connected to the Mini Display Port.
Apple has already changed my video card and the adapter but the problem is still there.
Someone can tell me if it is the ATI Radeon HD 4870 that has problems to have two monitors 30 "? Or it could be that the mini display port that is hard to read the two monitors and when the background is black (RGB-255-255-255) makes these lines?
Through the Apple store I then bought a new card (EVGA GeForce GTX 285 "). Unfortunately, after three weeks of waiting is not yet arrived. Proof that I want to do before returning to telephone assistance is whether on a card that has two dual-link DVI ports normal all goes well.
Sorry for the repetition of messages, but my English is very bad. This is the first time I connect to this site support
Mario
Message was edited by: marioart

In any case, this system does not support two 30".
I honestly don't think the 4870 with that adapter can support two 30". Just using the adapter itself would not give me the normal resolutions on my 30, where as the DVI port did. Luckily for me the adapter worked fine on my 20".
Truly I don't know why Apple would sell a card and not say just what displays it can power.
So I worked around my problem fine but I chose to get the 285 also. My question to you though is, did Apple make you pay for it? Was it part of a deal with them because the Radeon didn't work? You might want to talk to them about that. That is one expensive card.

Is display port and mini display port the most reliable way to connect to U2515H and alike?

It seems that there are a lot of horror stories with HDMI or DVI-to-HDMI, like not able to get 2560x1440 on U2515H.
So, is using the display port or mini display port the safest way to get U2515H working?
Which cards with display port so far work best with U2515H? Any recommendation?

What is Target Display mode?
Stefan

Connet a thunderbolt monitor and min display port monitor to a mac mini

I have a new late 2012 Mac Mini. I also have an exisiting Apple mini display monitor and just got a new Apple thunderbolt monitor. How do I get these both to work with this Mac Mini so I can have dual monitors? I read something about an external thunderbolt drive. How would that work and what product should I buy that has all the ports on the back? Thank you for the help.

Unfortunately a Mini Displaport monitor will not work when connected via a Thunderbolt display. Nor will a Thunderbolt display work via a Mini Displayport monitor.
See http://support.apple.com/kb/HT5219
You could use a DVI or HDMI monitor in addition to the Thunderbolt display, or you could use two Thunderbolt displays. You could sell your old monitor and buy another new one.

Apple Cinema Display and mini display port

I have purchased (for a ridiculous price) an adapter to allow me to use my cinema display with my new macbook pro retina system. While it does work it doesn't seem to allow me to use anything but best for display which is only 1280x800 resolution which is far less than this monitor supports and looks terrible. In fact for making me spend $30 for a stupid adapter is is very disppointing.
So first question is can anyone tell me if there is some way to get this to actually work?
Second question along the same line, is that I also purchased an adapter for mini display to VGA for using with projector systems that I sometimes need to hook up to when I go onsite to customer facitilites and within about an hour of being attached to an Acer monitor my entire system seg faulted and crashed with a hard reset. Equivalent to the Windows blue screen of death. I've never had this happen before and wondering if this is a known problem?
Thanks for any info you can provide.
Glenn

Do you have your MacBook Pro in mirror mode or extended desktop mode (System Preferences > Displays)? If it's in mirror (the default) then the external display will be limited to the MBP's screen resolution. I use my miniDisplayPort -> DVI adapter all the time with my Sony Bravia TV and have no issues displaying 1920x1080 on the extended desktop.
Officially, the Retina MBP supports:
- 2880 by 1800 pixels (Retina mode)
- 1920 by 1200, 1680 by 1050, 1280 by 800, and 1024 by 640 pixels (scaled mode)
In System Preferences > Displays make sure your display setting is Extended and then select the extended display panel and select 1680x1050. See if that helps. If that works, then try the 1920x1200 setting if your display supports it. BTW, the extended display panel only appears if you actually have the external display connected.
What make/model monitor are you using?
Never heard of a system crashing because it was connected to a projector. I also use the miniDisplayPort -> VGA adapter to project and have never had a problem.
Is there anything else going on with your MBP?

Are thuderbolt port and mini display port same?

mjfiuiu

Welcome to the Apple Support Communities
Mini DisplayPort and Thunderbolt use the same port, but they are not the same. Mini DisplayPort supports only audio (in some computers) and video, and Thunderbolt supports audio, video and high speed data transfer, so you can find Thunderbolt in the Thunderbolt Display and some external drives for Macs with Thunderbolt ports. Also, Mini DisplayPort cables and adapters are completely compatible with Thunderbolt, but Thunderbolt cables and adapters aren't compatible with Mini DisplayPort

Thinkpad Twist s230U no internal display, works on HDMI and mini display port

Hi,
My Thinkpad Twist does not display anything when turned on except on external monitors. The Device manager shows a greyed out internal display icon, says it is not connected.
1. Could this be the power connect ribbon cable p/n DC002C003W00 have a fractured wire(s)? I have tested for open circuit between PWR1 and PWR2 connectors and there are 4 sequential pins which are open circuit. Is this normal?
2. The touch screen works
3. There appears to be absolutely no LED backlighting working
4. Is there a possible fix for this and if so is it the power cables or some physical problem with the ribbon cables OR is it definitely a new display that is needed using existing cables?
Thanks in advance
Andrew

The last 4 pins on the connector are unused I have determined so it is not the power ribbon cable connector.
I found two wires fractured in the LCD ribbon cable right at the point where it feeds through the twist mount. I expect this could be a common problem after use. After repairing these two wires it did not fix the screen problem. I have ordered a replacement LDVS ribbon cable and will report back once I have replaced that.

Need a mini display port and audio to HDMI adapter for mid 2009 13" macbookpro

Can some body recomend an adapter cable that plugs into the audio (mid 2009 MacBookPro 13") and mini display port and outputs to HDMI with audio and video all together for a TV? I would rather not run a separate audio cable in addition to the HDMI cable.

http://www.kanexlive.com/iadapt51 - 5.1-channel surround sound from sources that provide such a signal
http://www.kanexlive.com/iadapt20 - 2-channel stereo sound

Can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.

hi, i have a late 2008 15 inch macbook pro, which have a mini display port.
I noticed that thunderbolt and mini display port looks a like. So, my question is :
can i connect thunderbolt duo hard drive to the mini display port of a late 2008 macbook pro which do not have thunderbolt port, but have mini display port.
thank you

ken94538,
no, you’d need a Thunderbolt-to-FireWire adapter or Thunderbolt-to-USB adapter to be able to access your Thunderbolt hard drive from your 2008 MacBook Pro.

Why does iTunes not display hdcp content on my second monitor? The adapter monitor and cable have HDCP Support. This also occurs with a rocketfish mini display port to hdmi adapter.

It works for a time and then fails.
ITunes 11.04.
iMac Purchased Early 2013.

Seems to work when I swapped dapaters from theb 3.0 adapter to the mini display port adapter. THis is the same thing that got it worling the first time byt in reverse.
Had already tried clearing the PRAM. If it occurs again, I will have to try redetecting displays next time. Judging by what I saw reading through these forums it will happen again,

What do I need to connect my late 2009 Mac book (mini display port) to the TV and get sound?

I'm totally confused!
I have a late 2009 model Macbook. And I want to connect it to my TV.
So my research has led to believing I need a Mini display port adapter and a HDMI cable - but from some of what I have read, this won't carry sound...
Can anyone clarify this and what I do actually need?

The Mini DisplayPort to HDMI doesn't carry audio unless you have the Mid 2010 model 7,1 and there're no audio plugs on most TVs to work with HDMI since it's expecting audio with theHDMI.
If you have the Late 2009 model 6,1 White Unibody with the MiniDisplay Port there is an adapter that can combine video and audio to HDMI.
http://www.monoprice.com/products/product.asp?c_id=104&cp_id=10428&cs_id=1042802 &p_id=5969&seq=1&format=2

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one view a movie downloaded to the MacAir on a TV screen?

I have a MacAir, mid 2011 model, and want to view video on my TV. I see that I need a mini display port to Hdmi but there are many of these. What exatly do I need and how does one go about viewing a movie downloaded to the MacAir on a TV screen?

Welcome to Apple Support Communities
That's exactly what you need. A Mini DisplayPort to HDMI adapter and a HDMI cable. See > http://support.apple.com/kb/HT4241?viewlocale=en_US
This is the only way to view a video on the TV. After connecting your MacBook Air to the TV, image on your TV should show immediately. Then, press Command and F1 keys to mirror your MacBook Air display, and open the video

How can I connect multiple devices to Mac mini display port? I need to connect a Canon 5D to my Mac and display the result on a VGA video projector. I am using mini hdmi to mini display for the camera. Can I connect the VGA to any other port?

Hi there I am connecting a Canon 5D to my laptop trying to use it as a webcam trough camtwist.
At the same time I need to output the streaming to a videoprojector.
The cam is connected to the mini display port do there is no port available for the VGA cable anymore.
Do I need to use a different port for the projector? Should I buy a video card?
Can't connect the camera via USB as that is too slow and it will freeze.
Many thanks for all your help
Best
Faeve

You might do better on a forum other than this one, which is "Using iPhone"

DRM content and mini display port

Similar Messages

Maybe you are looking for