DRM DB config error

I am getting following error while running the upgradeof DB scripts from the current to new version (11.1.2.1)
“Index (zero based) must be greater than or equal to zero and less than the size of the argument list”
let me know the inputs for this issues.
regards
ram

You are encountering Bug:3537738:
Bug:3537738
Comp Ver: 10.1
RDBMS Ver: 10.1
Fixed In Ver: 10.1.0.2
O/S: 100 Microsoft Windows 2000
Abstract: DIM-00019: CREATE SERVICE ERROR WITH O/S-ERROR: (OS 1387) DURING DB CREATION
Bug:3537738 has been fixed and Oracle 10g verion 10.1.0.2 was released on OTN.
What you will need to do is download the software again as the version of 10g for Windows, that is out on OTN now, contain the fix.

Similar Messages

  • DRM-79819: Encryption error: Config file encryption is not valid for this m

    Hi ALL,
    Suddenly we got this error while running an export via batch utility. any ideas?
    Error: DRM-79819: Encryption error: Config file encryption is not valid for this machine.

    This could be an issue with your drm-config.xml file, the file that stores the DRM configuration information defined in the DRM Console. If a drm-config.xml was restored from an old backup or copied from another machine, this could well be the issue.
    In this case, you can run the DRM Console to update the file and correct it. You may see a one-time error reported when the DRM Console starts up, but the Console app should correct the file automatically after reporting the error to the user.
    If this does not resolve your issue, review the Windows App Event Log, to determine which DRM Server process(es) are also reporting this error (to narrow down any other potential issues with a config file for one of the DRM Server executables). I am guessing this error was observed in just the DRM Batch client, but related Event Log should also be present in the App Event Log.
    HTH.
    *** An additional note, if your issue proves to be the one above, you may need re-enter passwords on your defined Database Connections for defined DRM Apps. Try just re-running the DRM Console and re-saving the config initially, but be aware this may be a required additional step, re-entering the DB passwords after the updated encryption has been applied to the stored drm-config.xml file.
    Edited by: 680314 on Jan 19, 2013 11:52 AM

  • Cannot find file drm-web.config after installation

    Hi all,
    I am trying to install drm version 11.1.2 on MS Server 2008 64bit. I tried installing the 64bit version of DRM. The installation succeeds but when the configurator is launched I get an error that it closed. I opened the web client and receive an asp.net error that the drm-web.config cannot be found. I went to the directory and it is not there. I read on another site that this happened. The guy reinstalled it and changed some settings in IIS. I tried a reinstall but it made no difference. I reviewed IIS but couldn't see anything to change, although the drm_pool was present. I uninstalled the 64bit version and installed the 32bit version. However, the same error occured. I looked at the support matrix and there is nothing to suggest drm isn't supported on MS Server 2008.
    I would be grateful if someone could let me know of a fix.
    Thanks,
    Nathan

    I think this is what you are looking for:
    User Configuration / Preferences / Windows Settings / Registry:
                    Value Name: Cache – Action: Replace – Hive: HKEY_CURRENT_USER – Key Path: Software\Microsoft\Windows\CurrentVersion\Explorer\User
    Shell Folders – Value Type: REG_SZ - Value data: D:\temp\%USERNAME%
                    Value Name:  Cache – Action: Replace – Hive: HKEY_CURRENT_USER – Key Path: Software\Microsoft\Windows\CurrentVersion\Explorer\Shell
    Folders – Value Type: REG_SZ - Value data: D:\temp\%USERNAME%

  • DRM Batch Client Error - ORA03135 connection lost contact

    Hi All,
    We have the DRM 11g installed on Windows machine and migrated this server recently to a new datacenter(DC1) however the database connected to this DRM server is still on the original datacenter(DC2).
    DRM works fine after the migration except for few issues in the nightly jobs scheduled on DRM server for doing exports. The scheduled job is invoking DRM batch client and failing with the following error.
    Unexpected error in drm-batch-client: Error received from DRM Process Manager service using address: net.tcp://localhost:5210/Oracle/Drm/ProcessManager/: ORA-03135: connection lost contact
    However this error does not occur if we restart the DRM services(thru config console) and rerrun the batch client automatically. Looks like DRM is loosing connectivity to the application server process , is it anything do with the timeouts between IIS and Weblogic server ?
    Any insights on this problem would be really helpful.
    Thanks,
    RB

    Hi RB,
    This isn't going to be connection between IIS and Weblogic as DRM does not use Weblogic (aside from the manual configuration for the DRM web service). The error that you're getting is being returned from your database server and seems to indicate that the connection to the Oracle database server has been dropped for some reason. There are some suggestions on what to do to try and resolve the ORA-03135 error here ORA-03135 Connection Lost Contact Tips
    Regards
    Craig

  • Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements after Mac upgrade to Yosemite 10.10 on iMac

    Is anyone else having Config error 16 issue when trying to start PSE 12 or Premier Elements 12 after the Mac upgrade to OS X Yosemite 10.10 on iMac. I have had a number of issues with software and things after upgrading to OS X Yosemite 10.10 and even 10.10.1.  I have uninstalled and reinstalled both PSE 12 and Premier Elements 12 a number of times and everything goes fine until its ready to launch and then you get an error message. Numerous uninstalled and reinstalls don't removing the problem.  Strangely enough  PSE 11 still appears to boot up and I never owned Premier Elements 11 so I don't know if it will start. I thought with Apple dropping its Apeture software and greater integration of iPhoto and Apeture files into Lightroom 5.7 all would be harmonious between these two players. Im not sure where Adobe wants us to go it recently removed the plugin to allow you to update files from LR to Adobe Revel, whats up with that. I now own two version of Adobe software that no longer work with my Mac and now way of uploading pictures from Lightroom to Revel. Needless to say I am pretty reluctant to sign on to a subscription of Creative Cloud with long term financial obligations when I can't even get my current Adobe software to work independently much less integrate with Lightroom. Frustrated with it all!

    Get rid of 'put disks to sleep when possible' and you may see a dramatic improvement (not necessarily a cure).
    That specific problem is a multiple-Processor (including graphics processor) problem, where one of the processors lost track of whether it should be responding to interrupts. You may have a Hardware problem.

  • Acrobat X Pro Config Error 130:11

    Hello,
    I've now un-installed & re-installed Acrobat X Pro a couple of times in order to get over the issue of Config Error 130:11 - which causes the application to quit (see link to original thread below).
    However, I cannot afford to do this continuously - where do I go from here?
    Thanks,
    Kieran
    http://forums.adobe.com/thread/1013013?tstart=30

    Hi there,
    The workaround we have right now is to:
    Launch any other CS6 product (such as Photoshop or InDesign)
    It will pop-up trial screen at launch.
    Click on License this software and restart subscription.
    Launch Acrobat X after this. It should launch fine
    Our engineering team is working on getting a permanent fix available for this issue.
    I'm sorry for the inconvenience!
    -David

  • DRM Intel i915 errors

    Hi,
    After going out of blank mode, my external VGA monitor will randomly refuse to work (the primary laptop monitor works fine). This seems to be fixable only by rebooting.
    Those errors show up in dmesg just after booting the computer :
    [lun. avril 20 09:15:34 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 09:15:35 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 09:15:53 2015] [drm:intel_set_cpu_fifo_underrun_reporting [i915]] *ERROR* uncleared fifo underrun on pipe A
    [lun. avril 20 09:15:53 2015] [drm:intel_cpu_fifo_underrun_irq_handler [i915]] *ERROR* CPU pipe A FIFO underrun
    Those show up every few minutes or so :
    [lun. avril 20 12:35:30 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 12:38:29 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 13:15:04 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 13:23:17 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 13:23:30 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 13:23:49 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 13:24:03 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 13:57:58 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    [lun. avril 20 13:58:11 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    When coming out of blank mode, those show up :
    [lun. avril 20 14:16:06 2015] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to enable link training
    [lun. avril 20 14:16:06 2015] [drm:intel_dp_complete_link_train [i915]] *ERROR* failed to start channel equalization
    [lun. avril 20 14:16:07 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    I've already changed the acceleration method to UXA, without results (although I believe the problem show up less frequently but I'm unsure).
    Any idea ?
    Thanks in advance

    Hi gentledevil,
    There is a similar thread here https://bbs.archlinux.org/viewtopic.php?id=184857 and also a couple of bug reports [1]  [2]. Unfortunately there is no solution yet.
    gentledevil wrote:[lun. avril 20 12:35:30 2015] [drm:intel_uncore_check_errors [i915]] *ERROR* Unclaimed register before interrupt
    Also, searching the kernel bug tracker for the error above leads to the the following report that may be related https://bugzilla.kernel.org/show_bug.cgi?id=90951

  • Apple Outlook DAV Config error with Windows7; Any help?

    I have updated Windows7 and I have downloaded the icloud control panel.  I keep getting the Apple Outlook DAV Config error.  Any help?

    I encountered the same problem yesterday.  I have not found a solution but take a look at this thread. https://discussions.apple.com/thread/3377753?start=0&tstart=0  The conclusion (at that time) was a conflict between iClound and reoccurring appointments in Outlook.  The only solution:  delete all of your reoccurring appointments in outlook  (and stop using them going forward too?)........not very feasible for me.
    Let me know if you find anything.

  • Config error, account determ, group missing for paid by company exp.type

    Hi All,
    When I am adding an Expense type to an Expense report,I am getting the following error message:
    "Config error, account determ, group missing for paid by company exp.type"
    I have maintained the configuration in Business configuration>Fine tune activity>Expense reporting-US.
    I have maintained Expense Reimbursement Group as Z1(Customized) as well asExpense Account:-  but not maintained offsetting Account For  Paid Expenses.
    Please find the screenshot.
    Sincerely,
    Rajitha

    Dear All,
    SAP development has created a software correction related to the issue.
    Software correction is  deployed in customer systems on 25th August,2014.
    Sincerely,
    Manasa Anantapur

  • Url-template-config Error Deploying app in WLS9.1

    I am trying to deploy my application in WLS9.1 and using jdk1.5.0_08. I am getting url-template-config error. There is this file "url-template-config.xml"at
    \weblogic91\server\lib\consoleapp\webapp\WEB-INF which is where this error arises and inside that file the schema definition is:
    <url-template-config
    xmlns="http://www.bea.com/servers/weblogic/url-template-config/8.0"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://www.bea.com/servers/weblogic/url-template-config/8.0 url-template-config.xsd">
    Why is weblogic 9.1 using a 8.0 defined template and is this the main problem? Please do help me out.
    -Thanks

    Hi
    Did you get solution for url-template-config issue with weblogic 9.1 . Iam also getting the same error
    15:23:22,531 [[ACTIVE] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)'] ERROR URLTemplateDescriptor:152
    - Exception while loading URL templates, /WEB-INF/url-template-config.xml
    Throwable: javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismat
    ch expected "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
    Stack Trace:
    javax.servlet.ServletException: error: The document is not a url-template-config: document element namespace mismatch expected
    "" got "http://www.bea.com/servers/weblogic/url-template-config/8.0"
    at org.apache.beehive.netui.core.urltemplates.URLTemplatesFactory.getTemplates(URLTemplatesFactory.java:131)
    at org.apache.beehive.netui.core.urltemplates.URLTemplateDescriptor.load(URLTemplateDescriptor.java:133)
    at org.apache.beehive.netui.pageflow.PageFlowContextListener.performInitializations(PageFlowContextListener.java:102)
    at org.apache.beehive.netui.pageflow.PageFlowActionServlet.init(PageFlowActionServlet.java:120)
    at com.bea.console.internal.ConsoleActionServlet.init(ConsoleActionServlet.java:185)
    at javax.servlet.GenericServlet.init(GenericServlet.java:256)
    at weblogic.servlet.AsyncInitServlet.initDelegate(AsyncInitServlet.java:94)
    at weblogic.servlet.internal.WebAppServletContext$AsyncInitRequest.run(WebAppServletContext.java:1641)
    at weblogic.work.ServerWorkManagerImpl$WorkAdapterImpl.run(ServerWorkManagerImpl.java:518)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:179)
    Please let me knwo
    Thanks
    Binu

  • Startup config error after upgrading to ASA from PIX

    Hey guys.  I get the following startup-config errors when reloading our ASA.  A pix->asa conversion was just done on it.  The ASA is currently running 8.2(5), and I am trying to get ready to update it to the most stable release, and wanted to make sure all my ducks are in a row.  What is going on with the "will be identity translated for outbound"? This is part of the VPN configuration, and I understand nat0 is saying to not nat it.  Is this something that I should be worried about?  The ASA is not in production currently.
    Let me know if you need further information
    Thanks,
    .........nat 0 10.37.0.116 will be identity translated for outbound
    *** Output from config line 406, "nat (inside) 0 10.37.0.1..."
    nat 0 xx.xx.xx.xx (PUBLIC IP) will be identity translated for outbound
    *** Output from config line 431, "nat (inside) 0 xx.xx.xx..."
    Line 406
    nat (inside) 0 10.37.0.116 255.255.255.255
    Line 431
    nat (inside) 0 xx.xx.xx.xx (PUBLIC IP) 255.255.255.255
    Corresponding global
    nat (outside) 0 access-list outside_inbound_nat0_acl outside
    nat (inside) 0 access-list inside_outbound_nat0_acl
    ACL
    access-list outside_inbound_nat0_acl extended permit ip 172.16.16.0 255.255.255.0 any
    access-list inside_outbound_nat0_acl extended permit ip any 172.16.16.0 255.255.255.0
    access-list inside_outbound_nat0_acl extended permit ip 10.37.0.0 255.255.0.0 172.16.16.0 255.255.255.0
    access-list inside_outbound_nat0_acl extended permit ip 172.31.0.0 255.255.0.0 172.16.16.0 255.255.255.0

    Hi,
    I would imagine that there is no problem as the firewall has not given any kind of error message.
    I do personally wonder sometimes why is it so (atleast in the 8.2 softares etc) that the firewall shows a message on the CLI when you are for example configuring a "global" / "nat" command pair.
    I wonder if this falls into the same category.
    The configuration format for NAT has stayed pretty same leading to the 8.2 softwares. I'm not totally sure what software you are going to go for but you seem to have the latest 8.2 series software so next steps are already 8.3 / 8.4 / 9.0 / 9.1
    ALL of the above mentioned softwares introduce a completely new NAT configuration format to the ASA. While the ASA automatically converts the configurations its not always 100% process not to mention that the NAT configuration probably is far from optimal.
    - Jouni

  • Help with Acrobat X Pro Config Error

    Hello, I'm looking for some assistance with Config Error 130:11 on Acrobat X Pro running on Windows 7.
    The message reads:
    A problem has occured with the licensing of this product. Restart your computer and re-launch the product.
    Error: 130:11
    I'm using the subscription service for CS6.
    Help appreciated!
    Kieran

    Hi Sandeep,
    Thanks for your response.
    Acrobat Reader had been installed on the machine, but not an earlier version of Acrobat - it's a new machine, but I installed CS5 Design Standard before subscribing to CS6.
    Since my CS5 software was an upgrade (as was CS4 - I had been asked to re-enter the CS4 serial number), I think the Acrobat software was never fully installed prior to the CS6 download.
    The permissions for SLStore were:
    System & Administrator - Full Control
    Creator Owner - Special
    Users - Read & Execute
    Users - Speical
    The permissions for Adobe PCD & caps were:
    Administrator - Full Control
    Everyone - Read
    When the Adobe PCD & caps folders were moved to the Desktop & the Acrobat X Pro re-launched, I received an Error: 6 response:
    Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support... etc
    I assume this is my next step?
    Many thanks,
    Kieran

  • AI Group Config Error 10001 using Virtual Channels

    In my LabVIEW block diagram, I usually enter in numbers, e.g. 0,1,2 for the channel string input of AI Config. When I try to use a virtual channel, I simply type in the virtual channel, e.g. 0,K Thermocouple,2. However, this causes AI Group Config Error 10001, which applies to an invalid channel string. What is the correct way to enter a virtual channel into the channel string?

    Do you have channels with virtual names of "0", and "2"?
    If not you may be confusing MAX by using both naming conventions.
    Try using only Virtual names.
    I generally will use an array of strings where each element is the vitual channel name with no problems.
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Indesign CC 2014 config error 5

    Hi there, need help fixing an issue i'm having with indesign CC 2014 coming up with config error 5 when i try to open up the program (not a file). I have tried uninstalling and reinstalling several times, deleting preferences and even reverting back to Indesign CC. Same thing happens everytime. Any ideas?

    Nevermind. I just saw the screenshot.
    I don’t have my Mac open right now but on Windows here’s the folder you need to look at: C:\Program Files\Adobe\Adobe InDesign CC 2014\Scripts
    Make sure that none of the CC extension scripts got moved there. If they did, move them back to the CC folder.

  • Parameter.config error

    Hai,
    iam getting the error parameter.config could not be located or read in apache webserver,forms and reports webserver when i start the applications.i was asked to do the following
    update the value for the guest user end date to null
    but i checked the value for end date column for guest user.it was already set to null.
    what is the reason iam getting the same error paramter.config could not be located or read .wat else can i do to solve the error.
    Iam a fresher.so help me to solve the error.iam analysing this issue for a long time but i couldnot get a proper solution.
    Regards
    orauser123

    Hi;
    >
    update the value for the guest user end date to null
    but i checked the value for end date column for guest user.it was already set to null.
    what is the reason iam getting the same error paramter.config could not be located or read .wat else can i do to solve the error.Plz follow those notes and see its helpful:
    Cannot Read Value From Field Parameter.Config Error When Starting/Stopping Apache  Doc ID:  298143.1
    adstrtall.sh is failing with error 'Cannot read value from field PARAMETER.CONFIG'   Doc ID:  356434.1
    Regards;
    Helios

Maybe you are looking for