DRM for 3d on savage cards, please!
I've read about 12 different conflicting articles on how to enable dri on a prosavage DDR, and none work.
I have rebuilt xorg and mesa, installed the drm packages and still error out when modprobing the driver modules.
Help please!
I think this is the wrong forum, bud...
As for DRI on Savage cards, that is borderline impossible. And if you can get it working, you won't get much of a performance boost.
Similar Messages
-
Hi I downladed minecraft of tongbu, and it asked for Apple ID, it crashed I think it is used to get Apple ID and use it on MY credit card please tell me what to do. I do not want to factory reset because I have a lot of gaming progress, tell me what should I do, I beg you.
Hello there wkertisrags,
It sounds like you are concerned about your Apple ID security. I would start by resetting your Apple ID password with this article:
Apple ID: Changing your password
http://support.apple.com/kb/ht5624
You can also add some enhanced security with Two-Step Verification, and here is some more information on that:
Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/ht5570
If you feel your account data or security has been compromised you may want to reach out to our Account Security team with this article:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Thank you for using Apple Support Communities.
Take care,
Sterling -
I entered calculates hands and more than one account and used a credit card please raise security measure for Visa card and thank you
Hi Eva B.,
Please refer to the help document below:
Adobe Store | Online order and payment FAQ
Regards,
Sheena -
All my old tv shows are not working please help my computer sed I have to Atheris 5 computers to play all my old tv shows I Pade for with eney Itunas cards.
What do y mean by not work?
What happens when y try to play them on yur iPod?
What happens when yo try to play them in iTunes on yur computer?
If you get a message what is the exact wording of the message?
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
Some countries do not allow redownloads some kinds of media -
I can't change the country for my new credit card. Help please.
I stopped family sharing, but I still receive a message that I belong to a family when I try to change the country for my new credit card. Help please.
Sometimes logging out of iTunes can free up the editing.
Do you use iTunes Match? -
So I need a new iPhone 3G SIM card to activate my iPhone. I hear you can get one free at Apple Retail Stores. Is this true? If not, can someone please tell me how I can get one? I need it for 3G not 3Gs. Please? I'm desperate..
Apple does not provide SIM cards, carriers do.
Go to your carrier and get a SIM card. Whether it is free or not is up to them. -
Please can someone help me. I have been using my present account card for almost 2 years. Recently when purchasing free apps from store, I put in my password, then it takes me to my account to enter the security code for my card I do this and I have even re-entered the new card and it's still not accepting it.
Hence I cannot update or buy until I do this. The same thing happened with my daughters account and had to use her dads card.Please can someone help me. I have been using my present account card for almost 2 years. Recently when purchasing free apps from store, I put in my password, then it takes me to my account to enter the security code for my card I do this and I have even re-entered the new card and it's still not accepting it.
Hence I cannot update or buy until I do this. The same thing happened with my daughters account and had to use her dads card. -
Help! My iPod touch won't let me download any apps. A message keeps coming up saying "This Apple ID cannot be used for the iTunes store. Please enter another Apple ID" I changed my ID to see if that would work but the same message still comes up.
Where are you physically located?
What country's Store are you using?
The two have to be the same and the payment method for your account also has to be associated (billing address, where iTunes gift card was purchased) with that country.
Has the ID(s) worked before for purchases for this country's store? -
I use labview 8.0 and i can not run daqmx driver for pcmcia 6062e daq card
i use labview 8.0 on window xp .when i installed a PCMCIA daq card 6062E, i could not run daqmx driver.It is fine to see that the traditional version is working well.When i install daq card sometimes it is working well with traditional driver but mostly i see error on reading an analog input from PCMCIA daq device.An error called 'base adress' occures .I use last version of driver that is daqmx 8.0.1. and i have installed this correctly but again i could not see any signal on the test panel for daq-mx driver.I don't know what is the problem.Also when i install PCMCIA daq card Please reply this message.I need your helps.
ThanksHello,
Thanks for your reply.I will try to answer your questions.
I have checked the Device Mananger and I have seen that the device is detected by Windows XP. For another question the card shows up under both NI-DAQmx Devices and Traditional NI-DAQ (Legacy) Devices consistently in the Measurement & Automation Explorer.I use a way that I reset the driver for traditional NI-DAQ in MAX,and then i reset the device for NI-DAQmx driver in MAX and again i tried to run the test panel of DAQmx driver but again i saw a wrong signal or noise signal on the test panel i could not see the sinusoidal signal that i connected. i do get the test panels to run with the card using the DAQmx driver, But could not run the DAQ diagnostic utility.The error was as i specified below.
03.05.2006 09:49:35
Results saved to: C:\Documents and Settings\serkan\Desktop\Diagnostic Results.txt
Selected Device: Dev1
Device Type: DAQCard-6062E
Serial Number: 107509E
Device Support: (PASS)
NI-DAQmx Version: 8.0 (PASS)
Device Reset: (FAIL)
Error -50002 occurred at an unidentified location
Possible reason(s):
The specified device is not a valid device. The operation could not be completed as specified.
------ DIAGNOSTIC UTILITY ABORTED -----
And for your last question i can say that i have used the DAQ card on other laptops.But the results were the same.İ hope to see your reply
Thanks,
Serkan Buhan
Electrical-Elecronics Engineer
Researcher
TUBITAK-BILTEN -
Please I am doing my final year project on secure mobile application using Java Card Technology.
I need to write and an application that can send SMS on a SIM card to another SIM card with the same application. The application will have a server side which manage the storage of messages and at the same time communicate information to the client on the SIM remotely. I am suppose to use wi-fi (TCP/IP) for transmission.
Can anybody please give me ideas and possible working codes and simulators.
I mean step by step procedure of how to start.
THANK YOU.Hi,
I found the following resources helpful when starting out in JavaCard.
JavaCard documentation:
Java Card Technology for Smart Cards: Architecture and Programmer's Guide (Book)
http://java.sun.com/docs/books/javacard/index.html
JavaCard specifications:
http://java.sun.com/products/javacard/specs.html
Global Platform specifications:
http://www.globalplatform.org/specificationview.asp?id=card
Communication between SmartCards and terminals is based on ISO 7816 part 3 and 4 so if you�re completely new to the SmartCard environment it may be helpful getting an overview regarding these specifications. Unfortunately these specifications are not free, they�re available from.
http://www.iso.org/iso/en/ISOOnline.frontpage
Software:
The basis for all development is the JavaCard and Java Development kits.
Java Development Kit
http://java.sun.com/j2se/1.4.2/download.html
JavaCard Development Kit
http://java.sun.com/products/javacard/dev_kit.html
Full installation instructions can be found in JCDevKit_User_Guide.pdf which is contained in the JavaCard Development Kit distribution.
Several companies provide IDE�s that will aid you in developing and deploying applets to JavaCard.
For example:
Aspects Developer
http://www.aspectssoftware.com/devtools/index.html
There are others out there as well. You may need to also buy physical sample cards; however, the IDE�s usually have simulators built in.
Hardware:
To interact with physical cards you�ll require a PCSC compatible card reader.
Omnikey
http://www.omnikey.com/
GemPlus
http://support.gemplus.com/gemdownload/readers/index.aspx
Hope this helps.
Cheers,
Alasdair -
I have an Apple Power Mac G5 Dual 2.3 GHz/6GB RAM/500GB HDD/Superdrive PowerPC Desktop and just bought an Airport Extreme card for it. The card is recognized but will not see the in-house network. This is a pre-intel computer. Do I need an additional antennae? If so, which one because my research is confusing me about what is supposed to work with this computer.
Please check out the following Apple Support article to see if your particular Power Mac model supports an external Wi-Fi antenna.
-
I created an apple ID with iTunes gift card
Then i signed in
I tried to download a game and it said that
My email is not verifyed then I to verify it but
It said that my email is already verifyed for another email
Can someone please help me with this problemMake sure there is no other account using that email. (Try going to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ hitting Reset your password, and then enter the email address.
-
Windows Update installed the drivers for the wrong sound card?
I need serious help with this one.
It all started October 31st when I find that Windows Update lists an update for my sound card - a Sound Blaster Li've! 24bit internal card. I install it, reboot, and realize that my sound is not coming through the speakers (Note, sound was working before I installed this update. I'm not even sure if the sound card is processing to it). I realized that Windows Update seemed to have installed the drivers for the wrong sound card. It installed drivers for "SB Audigy" (it was originally SB Li've!), why they chose to be so generic - I don't know. I later find out that not even Creative's website has this updated driver, but apparently, only Windows Update is issuing this out.
But wait, it gets even more frustrating.
So I don't have System Restore enabled (big resource hog), and I need to go back to the older drivers. I originally do a driver rollback using the Device Manager, which made the drivers go back to what they were before - but still wasn't outputting sound. I think even though the older drivers were being used by Windows, the software that Creative issued wasn't picking up this fact and thought I still using the newer ones for Audigy. So I decided to uninstall everything and start with an actual driver installation executable from Creative's website (SB24_PCDRV_LB__04_0090.exe). What I found out was that if new drivers are detected, I can't actually install over them.
However, if I uninstall the drivers using the Device Manager, it'll automatically install everything - the control panel, the preferences, drivers, etc for the new "SB Audigy" drivers that were issued Oct 3st once I scan for hardware changes. The reason I need to scan for hardware changes is because if I uninstall the drivers from the Device Manager, it'll remove the instance of "SB Audigy" from the list. This causes problems for the installer for the older drivers (SB24_PCDRV_LB__04_0090.exe) because now it thinks there isn't any hardware to install the drivers for (all because I haven't made the Device Manager actually discover my actual sound card, yet unless I press "Scan for Hardware changes" which as a result, will install the newer drivers from Oct 3st automatically. I hope this makes sense so far).
So now I can't uninstall the newer incorrect drivers so I can install the older ones for the actual sound card. Normally I heard that you can change something in the new driver's installation executable to properly uninstall everything. Only problem is, Windows Update doesn't exactly tell you where it's downloading the driver/hardware installation files. I know in the Software Distribution you can find Windows Update stuff downloading there - but I couldn't find the SB Audigy driver update it keeps installing while "scanning for hardware changes" in the Device Manager.
This was incredibly hard to put into detail, so I hope that it makes a little bit of sense. If you need clarification on anything please let me know and I'll do anything to help eliminate the problem. Just remember I have:
Windows 7 x64
Sound Blaster Li've! 24bit
I think the only problem I'd like to solve is - how could I install older drivers if Windows keeps installing the newer ones even after I uninstall them? Because right now, I can't do much unless I know how to get rid of the installation files for the Oct 3st update so it won't have anything to use. Another way to rephrase the question is, how could I get the Device Manager in Windows to display my soundcard as "Multimedia Audio Controller" for as long as I need so I can run SB24_PCDRV_LB__04_0090.exe which will then detect that there is a sound card that can use the drivers and install them properly?
Thanks for your help guys, I hope we can solve this. Because I've done everything I could. Hopefully I don't need to reinstall the operating system just so I can have sound working.Click on Start> ALL Programs > Creative > Creative Audio Console.
Make sure speakers are set to 5. if that's what you're using. I like to Synchronize with Windows Control Panel. Turn EAX to No effects, and/or turn effects to 0%. On the CMSS 3D Tab, turn the Mode to OFF. -
i live in Bidar,Karnataka,India.I recently updated my firmware.i dont have an official sim card to regain access and complete the process,can u please suggest me where can i buy an official sim card,please?
From the carrier for your cell phone service.
Allan -
How can I asociate a DataSource to a Port for my Video Capture Card???
Hi!
First of all, I sorry for my bad english.
I'm trying to manage ports of my Video Capture Card.It's 4 ports. I believe I can manage it cause running this code I found in a web, I can see a panel called Video Source that contain all my capture devices (the capturer card too) and the four ports. Ports have been asociate like SVIDEO, TVTUNNER, COMPOSITE, COMPOSITE2. I'm trying use PortControl, but I don't ontain nothing. I'm learning java for around only three weeks, I don't know very much.
My question: How can I asociate a DataSource to a Port for my Video Capture Card and so manage 4 streamings data . Should I work Port Control over a medialocator, a datastream, a player...?
I'm looking forward your answers. I'm very sad cause this problem.
Thanx for advance!xinixmayur, please don't post in threads that are long dead. When you have a question, start your own topic. Feel free to provide a link to an old post that may be relevant to your problem.
I'm locking this thread now.
db
Maybe you are looking for
-
Does the apple warrenty start again when apple replace your products
Hi All When apple replace your products like my iphone 5 does the 12 month warrenty start again? as the replacement I have is giving me an electric shock in my ear when on the phone and my phone is on charge
-
Not able to create sales orders.
Dear Friends, am new to SAP-PS. I have following query. - Hide quoted text - m creating an Demo Project for help.sap.com. for - Engineer to Order(ETO) of Trubine - Link is http://help.sap.com/saphelp_46c/helpdata/en/a3/c23cdaa62d11d3b544006094b90caa/
-
Hi there folks, Has anyone else had problems with what I can only describe as screen burn-in from the case logo? I've read reports of people having problems with being able to see the logo in low-light situations, but I can permanantly see the Apple
-
J'ai essayé les différentes choses proposées et rien, c'est choquant on dirait une arnaque RR
J'ai essayé les différentes choses proposées et rien, c'est choquant on dirait une arnaque RR
-
Mostra o ocultar campos segun valor en cuadro de lista
Pues tengo que hacer un cuadro de lista o lista desplegable donde segun la opcion escogida se muestren unos campos de texto u otros. No encuentro la accion que me lo permitiria , creo que se hace con javascript pero eso se me escapa, espero qeu podai