DRM migration issue. Migrating from 11.1.1.3 to 11.1.2.1 using Repository

Greetings, looking for some assistance and hopefully one of our colleagues can assist. When running the repository wizard, we get the following message during the schema copy process: RM_USER -Table does not have a primary key.
Once that message displays the process halts. We checked the RM_USER table and it does have a primary key. Please advise. Thanks.

I would have a look at this
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_install_11121.pdf
Take a read on the upgrade path section for this Note
You can upgrade to Data Relationship Management Release 11.1.2.1 from the following releases:
l 9.2.x
l 9.3.x
l 11.1.x
Note: If you are upgrading from release 11.1.2, install this release over the earlier release. If
you are upgrading from a release prior to 11.1.2*, you must first manually uninstall
the old release and then install the new release.
Let me know if this answers you :)
Edited by: Denzz on Apr 24, 2013 11:28 PM

Similar Messages

DRM migration issue. Migrating from 11.1.1.3 to 11.1.2.1 using the Reposito

When running the repository wizard, we get the following message during the schema copy process: RM_USER -Table does not have a primary key.
Once that message displays the process halts. We checked the RM_USER table and it does have a primary key.

I would have a look at this
http://docs.oracle.com/cd/E17236_01/epm.1112/drm_install_11121.pdf
Take a read on the upgrade path section for this Note
You can upgrade to Data Relationship Management Release 11.1.2.1 from the following releases:
l 9.2.x
l 9.3.x
l 11.1.x
Note: If you are upgrading from release 11.1.2, install this release over the earlier release. If
you are upgrading from a release prior to 11.1.2*, you must first manually uninstall
the old release and then install the new release.
Let me know if this answers you :)
Edited by: Denzz on Apr 24, 2013 11:28 PM

EPM upgrade and migration from 11.1.1.3 to 11.1.2.3 using LCM

Hi All,
We are migrating Hyperion from 11.1.1.3 to 11.1.2.3. Since this cannot be achieved directly,we are planning to upgrade first to 11.1.1.4 and then to 11.1.2.3 using LCM.
Does this upgrade path requires intermediate 11.1.1.4.500 patch to be applied on 11.1.1.4 to migrate to 11.1.2.3 or not?
Thanks

Thanks Harish.
I have gone through the doc but there is no information on whether 11.1.1.4.500 patch is required in EPM upgrade from 11.1.1.4 to 11.1.2.3.
Has anybody done the upgradation from 11.1.1.4 to 11.1.2.3 without the patch 11.1.1.4.500 on 11.1.1.4 successfully? .
Any issues during this upgradation path? please do share.

Migrating from Informix 9.21 to Oracle 9.2.0.4(Using Existing Tables space)

Hi
I want to create tables & indexes on different tablespaces as planned. I have already created table spaces using OEM. (for a given schema different set of tables have to be created on diffrent tablespaces and so on)
But,it appears,"OMWB Table Space Discoverer" is not much of useful. It allows to specify one for tables, one for indexes and TEMP. Is there anyway I can 'discover' all the tablespaces from the target and assign the tables & indexes to various tablespaces as planned.
Any suggestions?
Rgds
Jeya

Hi,
I was unable to reproduce your problem. I carried out the following steps in attempt to replicate the issue:
1. I launched the workbench, version 10.1.0.2, selecting the Oracle Lite "Default Repository".
2. Using the Oracle Enterprise Manager Console, I created a user "rtdb" with the password "rtdb" on my target Oracle 9i database.
3. I captured a test Informix database, generating its source and oracle models.
4. I then proceeded to migrate the database to Oracle and supplied my target Oracle9i database information in the "Migration Wizard, Step 1 of 4: Destination Database Details", supplying rtdb/rtdb as the username/password.
5. My test database migrated with no such error messages reported.
If you carried out the migration steps as I have outlined above, and are still experiencing issues with a "Failed to connect" error, I would contact support.
Regards,
Hilary

Migrate from Hyperion 9.3.1 to 11.1.2.1 using LCM utility

Dear All,
I have successfully exported the BI + artifacts in Hyperion 9.3.1 by using LCM Utility..I have got a listing.xml file and also a LCM folder having info and resource in the directory.
My question is that how can i import the extracted object from 9.3.1 to 11.1.2.1 using LCM utility??Where i can create the ImportPackage.xml file??Please let me know the procedure to import into Hyperion 11.1.2.1..
Revert back to me as early as possible...
Regards
Rahul R

Hi Kimberly,
we went through the same uncertain information.
We have been starting fom 9.3.0.1
And YES we had to make the step migrating to 11.1.1.3.
We only performed the schema updates.
Steps in detail:
*11.1.1.3*
Copy Application (HFM)
DB Schema Update 9.3.3
DB Schema Update 11.1.1.3
Export/Import HFM Security
Export/Import (HSS)
Export/Import (HFR)
*11.1.2.1*
ORA DB Data Pump 1:1
Import Schema HFM and HBI
Copy RM1 Folder
Migration Utility for HFM and HFR
Create HSS Schema
Migration of HSS using LCM
We have a picture which describes it nicely. Let me know it you need it.
Regards,
Bernd

Cannot open iTunes or Aperture after "Migrating" from old Mac

I migrated from an old "Black" MacBook to a new Aluminum MacBook using Migration Assistant. Now both iTunes and Aperture will not open on the new MacBook because they cannot open up their respective libraries. The following message appears:
"The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file."
"The Aperture Library file is locked, on a locked disk, or you do not have write permission for this file."
I did run into an issue when migrating when I used the same account name on the new computer as the old. It asked me to rename the old account which I did by appending with the number 1. The Migration Assistant put all the files into a new folder with the renamed account under "users". Not only this, all the folders and files lacked permissions for the new computer. I had to manually "Get Info" and add permissions for the new account on the new computer.

Go to /Music/ and get info on the iTunes folder.
Go to the *Ownership & Permissions* and set *You can* to *Read & Write*.
Also, click on *Apply to enclosed items*.
Do the same for the Aperature folder wherever it is located.

Migration from Small business server 2011 standad to Windows 2012 Server Standard

Hi everyone,
I have a network with SBS 2011 standard (that is the only server) and now we are moving (migrating) to windows 2012 server standard with an exchange 2013 (not yet installed).
The main thing is that when trying to install the migration tool on the SBS server, it will not install because it is not a 2008 R2 server.
is there a workaround for this problem?
I Hope this will help. Amir Ovadia

Hi,
Would you please first let me know how did you perform the migration? Regarding the migration tool, is it the Windows Server Migration Tools in Windows Server 2012 R2? Since you need to install
the Windows Server Migration Tools on the source SBS 2011 server, I suggest we could perform the following steps to install it.
Create deployment folders for ource computers by running the
smigdeploy.exe tool (included with Windows Server Migration Tools) on your destination server.
Register Windows Server Migration Tools on source computers that are running Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, or Windows
Server 2003 by using SmigDeploy.exe.
For details, please refer to the following article.
Install, Use, and Remove Windows Server Migration Tools
http://technet.microsoft.com/library/jj134202
In addition, here are some similar threads about how to perform the migration from SBS to Windows Server 2012 Standard, maybe they are useful to us.
how to Migrate sbs 2011 to Standard 2012 server
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server
Migrate SBS 2011 to Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard
Migrating from Windows SBS 2011 Essentials to Windows Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/41d17523-c6ae-4ba6-851f-a42b16f31d2a/migrating-from-windows-sbs-2011-essentials-to-windows-server-2012-standard
As there is no specific documentation on migrating from SBS to Windows server 2012, if you want the step by step procedure about the migration, we’d better involve
SBSMigration.com for detailed information.
Thanks.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Migrating from a PPC

Anyone have any tips on migrating from a PPC to a a new Intel iMac? Using migration assistant may bring over a lot of stuff which may not be compatible with the Intel Core 2.
Ron Goren

A Basic Guide for Migrating to Intel-Macs
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3 or G4 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior (does not work), TechTool Pro (pre-4.5.1 versions do not work), SuperDuper (newest release works), and Drive Genius (untested) may not work properly on Intel-Macs. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Written by Kappy with additional contributions from a brody.
Here is a list of where your important data is stored ("~" stands for "Home"):
Your Data in Documents:
~/Library/Application Support/AddressBook (copy the whole folder)
~/Library/Application Support/iCal (copy the whole folder)
Also in ~ / Library/ Application Support (copy whatever else you need)
~/Library/Keychains (copy the whole folder)
~/Library/Mail (copy the whole folder)
~/Library/Preferences/com.apple.mail.plist * This is a very important file which contains all email account settings and general mail preferences.
~ / Library/iTunes (copy the whole folder)
~ / Library/Safari (copy the whole folder)
~/ Pictures/iPhoto Library
If you want cookies:
~/Library/Cookies/Cookies.plist
~/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in Documents/Microsoft User Data
Also in ~ /Library/ Preferences/Microsoft

Oracle10g database migration from MID to MIT

Dear all,
im currently doing the migration from production server (MID) to dev server (MIT).
i've use 2 method below but all encounted the error and fail to import. hope some one can point the error and explain the some of my problem.
1. used oracle exp and imp
full database.
- i've exp the full database and drop all the current R3 table by following selection syntax.
select 'drop table sapsr3.' ||table_name|| ';' from user_table.
- but some table fail to drop because some of the table name consist '//'
- after doing imp, R3 cannot be start and keep show yellow status.
- log file display 'waiting for termination icman'
Q1. is that the method i did is correct?
Q2. how do i drop the table which start from '//'
single table.
- i've exp a single table from database then imp.
- while i check on SQL+. the table exist and consist data.
- but when i check on GUI. the table doesn't exist.
Q3. is that the table imported is only import to oracle. but not R3?
Q4. how to make it completely update to R3?
2. used SAP brtools.
full database.
- i've export a complete database backup(MID) by selected
backup and recovery -> database backup -> backup device type (disk)
- then import the backup to MIT
restore and recovery->while dabase reset->select consistent database backup()->
check the status of database files()->restore control files and redolog files()->
restore data files() ->reset program status()
note: () means the whole process.
Q5. database restored from MID to MIT, but the MIT could not start R3. may i know what i miss to cross R3 could not start?
single table
- export single table thru segment management-> export table from MID.
- import single table thru segment management-> import table to MIT.
Q6. error show oracle_home didnt set. but i've check on system enviroment and oracle_home is there. and i double confirm the variable by enter 'set'. Oracle_home still there. should i set oracle_home in cmd again?
note: pls state which method is preferable and which question is answering.
thanks and appreciate from yours reply.

finish patch the r3load and add the dbs/ora/tnsname = <SID> in the tnsname.
but the error is still the same.
INFO 2009-08-17 18:48:29
Output of C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect is written to the logfile R3load.exe.log.
WARNING 2009-08-17 18:48:29
Execution of the command "C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect" finished with return code 2. Output:
sapparam: sapargv( argc, argv) has not been called.
sapparam(1c): No Profile used.
sapparam: SAPSYSTEMNAME neither in Profile nor in Commandline
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: START OF LOG: 20090817184829
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: sccsid @(#) $Id: //bas/700_REL/src/R3ld/R3load/R3ldmain.c#20 $ SAP
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: version R7.00/V1.4 [UNICODE]
Compiled Jul 7 2009 08:04:27
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect
DbSl Trace: Cannot connect: dbs/ora/tnsname in profile missing
(DB) ERROR: db_connect rc = 256
DbSl Trace: Cannot connect: dbs/ora/tnsname in profile missing
(DB) ERROR: DbSlErrorMsg rc = 29
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: job finished with 1 error(s)
C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe: END OF LOG: 20090817184829
ERROR 2009-08-17 18:48:29
CJS-30023 Process call 'C:\usr\sap\MID\SYS\exe\uc\NTI386\R3load.exe -testconnect' exits with error code 2. For details see log file(s) R3load.exe.log.
ERROR 2009-08-17 18:48:29
FCO-00011 The step testDatabaseConnection with step key |NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|testDatabaseConnection was executed with status ERROR .
INFO 2009-08-17 18:48:56
An error occured and the user decide to stop.\n Current step "|NW_Export|ind|ind|ind|ind|0|0|NW_ABAP_Export_Dialog|ind|ind|ind|ind|4|0|NW_ABAP_Export|ind|ind|ind|ind|0|0|testDatabaseConnection".

Data Migration from 4.6C to ECC 6.0

Hi all,
Can you suggest me solution for data migration from 4.6C to ECC6.O which technique to be used!!
if you have the documents regarding the above post it which will be useful!!!
Thanks,
Yogeshwaran K S

Hi Yogesh
OS migrations are more or less painless beside the fact, that most "Unix" operating systems are using a different endianess (aside from Solaris on X86_64). For RFC and other SAP proprietary communication this is done in the kernel but if you use own software to read BINARY data (not talking about textfiles) you need to take care of that in your software.
Hope ths helps
Please reward points
Sunil

Migrating from other Application Server - security questions

Hello guys,
I am newbie with BEA Weblogic, migrating from JBoss/Tomcat.
I am interested in security techniques used in Weblogic.
For example, how can I configure web auth./protected area with authorisation from SQL (MySQL in my case) database? In JBoss/Tomcat I've used to configure JDBC security realm for Tomcat, but in Weblogic 8.1 I can hardly find such ability to configure such realm. I need to say that I see only one default realm.
I am using Weblogic Server 8.1.
Looking forward any your help, thanks!
If you can share some usefull links/articles - this would be great!
P.S. This just the first question. I have many of them dealing with EJB security... :-)

You can write your own "providers"
There are samples available with instructions at
http://dev2dev.bea.com/codelibrary/code/security_prov81.jsp

Migrating from Picasa to Elements

I have always used picasa, and have many thousands of pics on Picasa. I want to move my entire workflow to Elements 7 on windows 7.
Is there any simple way to migrate Picasa albums to Elements?

Interesting Query...
I myself have migrated from Picasa to Photoshop Elements long time back.... But I had few images that time.. I have one solution for you if you were organizing through Folders and if you want those folders as Albums in Photoshop Elements...
Simple workflow is:
- Launch Organizer
- Import all the files into a new Catalog of Organizer
- Go to Folder View
- Select one Folder.. you get an optoon to create instant Album >> Just click on that option and an album will be created. This album will have all the files in that folder and same name will be assigned to that Album...
If files are not organized in folder, there is no standard workflow to migrate from Picasa to Photoshop Elements..
And I have used Photoshop Elements 7 .. Now converted PSE7 catalog of 14000 images (Most of them are NEF) to PSE8 and it works fine for me :-)
I am very happy with this great Product having rich features.... Ohh, Did I miss to mention that Face Recognition in 8th release of Photoshop elements rock!!!

Work book size increased by 4 times after migrating from BW3.5 to BI7

Hi Experts
work book size increased by 4 times after migrating from BW3.5 to BI7
our client runs the report using BI web report and exports to excel sheet.
she asks us to investigate why the size of the work book isincreased by 4 times after migrating from BW3.5 to BI7.
please let me know what you think.
thank you for reading this.
Regards
satish

ANY suggestion would be greatly appreciated

Creation of domain issues - migration from weblogic 10.3.0 to 10.3.5 versio

Hello,
i would like to kindly ask for a help with following issue:
Basically we are migrating from the 10.3.0 to the 10.3.5 version. We are building the domain using the template in "silent mode". And when i try to create the domain with new weblogic 10.3.5 im getting some errors.
The command to run the creation of the domain is following:
${WL_HOME}/common/bin/config.sh -mode=silent -silent_script=${SILENT_SCRIPT} -log=${WLLOGFILE} >> ${LOGFILE} 2>&1
returnCode=$?
SILENT_SCRIPT contains following commands:
read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar";
write domain to "/local/wg372/BM/appl/BmDomain";
set OverwriteDomain "true";
close template;
When i setup new env(solaris) with weblogic 10.3.5 im getting following error when the silent_script command (*write domain to "/local/wg372/BM/appl/BmDomain";*) is executed:
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - succeed: read template from "/local/wg372/BM/appl/config/NEW_DOMAIN_CONFIGURED.jar"
2011-07-18 16:53:00,427 INFO [runScript] com.oracle.cie.domain.script.ScriptExecutor - write Domain to "/local/wg372/BM/appl/BmDomain"
2011-07-18 16:53:00,505 ERROR [runScript] com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask - There was an error executing the script: /local/wg372/BM/appl/installer/silent_script
java.lang.NullPointerException
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.buildSecurityInfo(SecurityGenerateLDIFT.java:460)
     at com.oracle.cie.domain.security.SecurityGenerateLDIFT.<init>(SecurityGenerateLDIFT.java:119)
     at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:718)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.processWrite(ScriptParserClassic.java:573)
     at com.oracle.cie.domain.script.ScriptParserClassic$StateMachine.execute(ScriptParserClassic.java:429)
     at com.oracle.cie.domain.script.ScriptParserClassic.parseAndRun(ScriptParserClassic.java:148)
     at com.oracle.cie.domain.script.ScriptParserClassic.doExecute(ScriptParserClassic.java:110)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:72)
     at com.oracle.cie.domain.script.ScriptParser.execute(ScriptParser.java:35)
     at com.oracle.cie.wizard.domain.helpers.Executor.runSilentScript(Executor.java:68)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.runScriptWithExecutor(RunScriptTask.java:551)
     at com.oracle.cie.wizard.domain.silent.tasks.RunScriptTask.execute(RunScriptTask.java:335)
     at com.oracle.cie.wizard.silent.tasks.AbstractSilentTask.run(AbstractSilentTask.java:28)
     at java.lang.Thread.run(Thread.java:662)
In Windows env im getting following error:
create.domain:
[exec] -mode="silent" -silent_script=J:/_dev/build/installer/silent_script
[exec] << read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] >> succeed: read template from "J:/_dev/build/config/NEW_DOMAIN_CONFIGURED.jar"
[exec] << write Domain to "J:/_dev/build/BmDomain"
[exec] CFGFWK-60550: Script execution aborted. The script may contain an error.
[exec] null
CFGFWK-60550: - doc says
CFGFWK-60550: Script execution aborted. The script may contain an error.
Cause:
Action:
Level: 1
Type: ERROR
Impact: Configuration
I tried to google for this issue, look into the weblogic documentation but with no luck.
So i would like to kindly ask, if anyone of you perhaps could give me a hint/advise with this problem.
Thanks in advance.

Hi,
thanks for the reply but im not sure if we are talking about the same thing. What i need is to upgrade the weblogic "DOMAIN" not the weblogic installation itself.
Anyway,
after some googling and testing im again stucked with another issue:
1. First i have created the old doman (10.3.0)
2. Then i have tested the domain with the new weblogic version 10.3.5 - as it should be (and is) compatible within those 2 versions
---> worked fine
3. Then via offline WLST(of weblogic 10.3.5) i have managed to create new template with command writeTemplate(nameOfTemplate.jar)
4. But when i try to create the new domain with the new template via WLST(of weblogic 10.3.5) im again stucked (im able to read the template in wlst but not able to writeDomain ) - error:
wls:/offline> readTemplate('/home/wg372/tmp/new_template.jar')
wls:/offline/BmDomain>writeDomain('/home/wg372/tmp/new_domain')
Error: writeDomain() failed. Do dumpStack() to see details.
wls:/offline/BmDomain>dumpStack()
com.oracle.cie.domain.script.jython.WLSTException: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.jython.CommandExceptionHandler.handleException(CommandExceptionHandler.java:51)
at com.oracle.cie.domain.script.jython.WLScriptContext.handleException(WLScriptContext.java:1538)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:803)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.python.core.PyReflectedFunction.__call__(Unknown Source)
at org.python.core.PyMethod.__call__(Unknown Source)
at org.python.core.PyObject.__call__(Unknown Source)
at org.python.core.PyInstance.invoke(Unknown Source)
at org.python.pycode._pyx3.writeDomain$15(/var/tmp/WLSTOfflineIni6651397525640719781.py:71)
at org.python.pycode._pyx3.call_function(/var/tmp/WLSTOfflineIni6651397525640719781.py)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyFunction.__call__(Unknown Source)
at org.python.pycode._pyx24.f$0(<console>:1)
at org.python.pycode._pyx24.call_function(<console>)
at org.python.core.PyTableCode.call(Unknown Source)
at org.python.core.PyCode.call(Unknown Source)
at org.python.core.Py.runCode(Unknown Source)
at org.python.core.Py.exec(Unknown Source)
at org.python.util.PythonInterpreter.exec(Unknown Source)
at org.python.util.InteractiveInterpreter.runcode(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at org.python.util.InteractiveInterpreter.runsource(Unknown Source)
at weblogic.management.scripting.WLST.main(WLST.java:173)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at weblogic.WLST.main(WLST.java:29)
Caused by: com.oracle.cie.domain.script.ScriptException: The application location must have write permission.
at com.oracle.cie.domain.script.ScriptExecutor.writeDomain(ScriptExecutor.java:757)
at com.oracle.cie.domain.script.jython.WLScriptContext.writeDomain(WLScriptContext.java:795)
... 29 more
I tried to have a look around for the "The application location must have write permission." problem but again with no luck.
Furthemore when i try to do the same with old domain template, with old version of WLST (of weblogic 10.3.0), i have no problems with creating of the domain.
Any ideas?
Ill keep you updated :-)

What are the Issues in Migration from oracle 8i to oracle 10g

Hi,
Can you let me know what are the issues that i face when i migrate from oracle 8i to oracle 10g. I will be very thankful if you give me a list of issues that you face while migrating from 8i to 10g

In addition to Max's reply, you must be aware that you have to test your applications agains 10g database before you actually upgrade the database.
If you use CBO, it may produce different execution plans for one query when you run it in 8i and 10g. This may affect your application performances, which you don't like to happen.
Also you have to decide how much downtime you can afford during the migration. Can you afford some downtime and how much? If you can't than this makes the situation more complicated.
How big is your database? You may end up only with simple export/import solution using export import utility.
The bottom line is, whatever you decide, you must test your applications running against 10g database before you actually upgrade your database.

DRM migration issue. Migrating from 11.1.1.3 to 11.1.2.1 using Repository

Similar Messages

Maybe you are looking for