DRM patch

Hi Experts,
We were looking to apply the following patch:
Patch 12962660: Patch Set Update: 11.1.2.1.103 to fix login issues in hyperion DRM.
Can you provide any database schema updates with this? Or specific instructions on how to apply this?

Hi
What version do you update?
I've updated 11.1.2.0. to 11.1.2.1. and all db changes were made by Configuraion Console, but there were some problems with datetime type.
Best regards

Similar Messages

Still having problems with Yahoo's Music Service and my Zen Mi

I think I did a pretty good job searching the forums for a solution to my issue, so please don't flame me if I missed something
I'm having major licensing issues with Yahoo's Unlimited Music Service, even after doing the following:
. I'm running Windows XP SP2 (all updates accounted for and installed)
2. I'm running Windows Media Player 0
3. I installed the Windows DRM patch for this issue: KB8922
4. I upgraded the firmware for my Zen Micro from the factory setting to .02.05
I'm still getting errors in MediaSource stating that a license is required to transfer the file I downloaded from Yahoo Unlimited. I get similar errors when trying to transfer in Yahoo's Music Engine.
I read in the forums that firmware version .02.05 is more recent than 2..02. Is this correct? If so, shouldn't version .02.05 have all the enhancements and functionality found in v2?
In any case, this was a gift to my wife for her birthday, and it's currently useless to her at the moment, so any help you can offer would be greatly appreciated!
Thanks!
T.

Thanks for the quick reply, Jason.
I've tried updating from .02.05 to 2..02 several times (although other posts on this forum suggest that this shouldn't be possible). After the dri've on the Micro is formatted during the upgrade process, I get an error when the unit tries to reboot stating that the unit 'can't be started correctly', and that I should reboot and start the process over. The update process fails in the same place every time.
I've tried disabling the Enable Detector feature in MediaSource before updating, but that doesn't help either.
Now, I'm guessing that the only way to upgrade to 2..02 was from .0.03, but I evidently chose poorly. Is there <EM>anything</EM> I can do, or am I stuck with crippled functionality?
Thanks again for your help!
T.Message Edited by terrylar on 05-9-2005 04:6 PM

Acer C710 - USB Ports not working with patched kernel

I have an...
Acer C710-844G01ii
I have replaced the original SSD with a Mushkin 120GB SSD (MKNSSDCR120GB-7)
I've used John Lewis' script at https://johnlewis.ie to flash the firmware. It works great. It loads 64 bit dual arch iso (2014.10.01) written to a USB flashdrive (Well, I'm actually using SD card in a USB reader. Not sure if that makes a difference) without having to utilize the workaround listed on the Chromebook wiki page (https://wiki.archlinux.org/index.php/Ch … stallation). I just create a regular arch bootable usb and it seems to work fine. I can use the bootable USB tools. I can install arch to the hard disk fine. (I did this a couple of times on the original SSD that came with the chromebook before I replaced it, so I know it works without having to change the SSD).
The problem I'm having occurs after I install the patched kernel (linux-chromebook-3.16.4-1-x86_64 or linux-mainline-chromebook-3.17-1-x86_64 I've tried them both. Both times I wiped the hard drive and went through the entire install process from scratch). After booting, everything loads up fine except that I lose functionality of my USB ports. The custom BIOS still reads the arch bootable USB if I choose to boot into it. If I boot from the hard drive though, as soon as the patched kernel loads, the USB ports are not working.
The output of
dmesg | tail
is the same before and after inserting a flash drive into a usb port.
Running the command
lsusb
gives output
unable to initialize libusb: -99

Updated the system, now using arch kernel 3.17.1-1
Problem still exists.
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 15 15:04:35 CEST 2014
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000003fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040000000-0x00000000401fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040200000-0x00000000acee3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000acee4000-0x00000000af9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000014f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Google Parrot/Parrot, BIOS 4.0-6588-g4acd8ea-dirty 09/04/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x14f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0AD000000 mask FFF000000 uncachable
[ 0.000000] 1 base 0AE000000 mask FFE000000 uncachable
[ 0.000000] 2 base 0B0000000 mask FF0000000 uncachable
[ 0.000000] 3 base 0C0000000 mask FF0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 write-combining
[ 0.000000] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xacee4 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] reserving inaccessible SNB gfx pages
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14f400000-0x14f5fffff]
[ 0.000000] [mem 0x14f400000-0x14f5fffff] page 2M
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x14c000000-0x14f3fffff]
[ 0.000000] [mem 0x14c000000-0x14f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x14bffffff]
[ 0.000000] [mem 0x100000000-0x14bffffff] page 2M
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x3fffffff]
[ 0.000000] [mem 0x20200000-0x3fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x40200000-0xacee3fff]
[ 0.000000] [mem 0x40200000-0xacdfffff] page 2M
[ 0.000000] [mem 0xace00000-0xacee3fff] page 4k
[ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x379a0000-0x37cc7fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F6DD0 000024 (v02 CORE )
[ 0.000000] ACPI: XSDT 0x00000000ACFEF0E0 00004C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 0x00000000ACFF2720 0000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20140724/tbfadt-618)
[ 0.000000] ACPI: DSDT 0x00000000ACFEF250 0034C7 (v02 COREv4 COREBOOT 20110725 INTL 20140114)
[ 0.000000] ACPI: FACS 0x00000000ACFEF210 000040
[ 0.000000] ACPI: HPET 0x00000000ACFF2820 000038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 0x00000000ACFF2860 00005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 0x00000000ACFF28C0 00003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 0x00000000ACFF3900 000818 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000014f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x14f5fffff]
[ 0.000000] NODE_DATA [mem 0x14f5fa000-0x14f5fdfff]
[ 0.000000] [ffffea0000000000-ffffea00053fffff] PMD -> [ffff88014ac00000-ffff88014ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x14f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x3fffffff]
[ 0.000000] node 0: [mem 0x40200000-0xacee3fff]
[ 0.000000] node 0: [mem 0x100000000-0x14f5fffff]
[ 0.000000] On node 0 totalpages: 1032322
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 158 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10988 pages used for memmap
[ 0.000000] DMA32 zone: 703204 pages, LIFO batch:31
[ 0.000000] Normal zone: 5080 pages used for memmap
[ 0.000000] Normal zone: 325120 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xada00000-0xaf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40000000-0x401fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xacee4000-0xaf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xafa00000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf4000000-0xffffffff]
[ 0.000000] e820: [mem 0xafa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88014f200000 s86848 r8192 d23744 u1048576
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1016032
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=572dffe4-4501-4df5-967f-c535313cfa24 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3981852K/4129288K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 147436K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.000000] NR_IRQS:8448 nr_irqs:440 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1097.469 MHz processor
[ 0.000073] Calibrating delay loop (skipped), value calculated using timer frequency.. 2195.39 BogoMIPS (lpj=3658230)
[ 0.000078] pid_max: default: 32768 minimum: 301
[ 0.000089] ACPI: Core revision 20140724
[ 0.005690] ACPI: All ACPI Tables successfully acquired
[ 0.008808] Security Framework initialized
[ 0.008819] Yama: becoming mindful.
[ 0.009391] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.011193] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.012001] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012017] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.012360] Initializing cgroup subsys memory
[ 0.012370] Initializing cgroup subsys devices
[ 0.012374] Initializing cgroup subsys freezer
[ 0.012378] Initializing cgroup subsys net_cls
[ 0.012382] Initializing cgroup subsys blkio
[ 0.012420] CPU: Physical Processor ID: 0
[ 0.012422] CPU: Processor Core ID: 0
[ 0.012432] mce: CPU supports 7 MCE banks
[ 0.012454] CPU0: Thermal monitoring enabled (TM1)
[ 0.012472] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.012675] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.014781] ftrace: allocating 20674 entries in 81 pages
[ 0.037109] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070117] smpboot: CPU0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz (fam: 06, model: 2a, stepping: 07)
[ 0.070132] TSC deadline timer enabled
[ 0.070178] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver.
[ 0.070223] ... version: 3
[ 0.070226] ... bit width: 48
[ 0.070228] ... generic registers: 8
[ 0.070230] ... value mask: 0000ffffffffffff
[ 0.070232] ... max period: 0000ffffffffffff
[ 0.070234] ... fixed-purpose events: 3
[ 0.070237] ... event mask: 00000007000000ff
[ 0.090307] x86: Booting SMP configuration:
[ 0.090312] .... node #0, CPUs: #1
[ 0.103535] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.103559] x86: Booted up 1 node, 2 CPUs
[ 0.103563] smpboot: Total of 2 processors activated (4391.78 BogoMIPS)
[ 0.105926] devtmpfs: initialized
[ 0.112736] pinctrl core: initialized pinctrl subsystem
[ 0.112812] RTC time: 0:25:43, date: 10/27/14
[ 0.112986] NET: Registered protocol family 16
[ 0.113224] cpuidle: using governor ladder
[ 0.113230] cpuidle: using governor menu
[ 0.113291] ACPI: bus type PCI registered
[ 0.113295] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.113438] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.113443] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.113650] PCI: Using configuration type 1 for base access
[ 0.124189] ACPI: Added _OSI(Module Device)
[ 0.124193] ACPI: Added _OSI(Processor Device)
[ 0.124196] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.124199] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.130313] ACPI: Interpreter enabled
[ 0.130327] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.130336] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.130364] ACPI: (supports S0 S3 S4 S5)
[ 0.130367] ACPI: Using IOAPIC for interrupt routing
[ 0.130407] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136949] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.136960] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.137053] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.137240] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cedff])
[ 0.137249] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.137502] PCI host bridge to bus 0000:00
[ 0.137507] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.137512] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.137515] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.137519] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.137523] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.137526] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.137529] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.137533] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.137536] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.137540] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.137543] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.137547] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.137550] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.137553] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.137557] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.137560] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.137564] pci_bus 0000:00: root bus resource [mem 0xafa00000-0xfebfffff]
[ 0.137567] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.137583] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000
[ 0.137752] pci 0000:00:02.0: [8086:0106] type 00 class 0x030000
[ 0.137774] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.137786] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.137796] pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
[ 0.138004] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.138046] pci 0000:00:16.0: reg 0x10: [mem 0xe0706100-0xe070610f 64bit]
[ 0.138188] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.138353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.138392] pci 0000:00:1a.0: reg 0x10: [mem 0xe0705800-0xe0705bff]
[ 0.138555] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.138624] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.138714] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.138746] pci 0000:00:1b.0: reg 0x10: [mem 0xe0700000-0xe0703fff 64bit]
[ 0.138900] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.138967] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.139051] pci 0000:00:1c.0: [8086:1e12] type 01 class 0x060400
[ 0.139207] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.139354] pci 0000:00:1c.1: [8086:1e14] type 01 class 0x060400
[ 0.139506] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.139671] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.139708] pci 0000:00:1d.0: reg 0x10: [mem 0xe0705c00-0xe0705fff]
[ 0.139869] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.139938] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.140021] pci 0000:00:1f.0: [8086:1e5f] type 00 class 0x060100
[ 0.140331] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.140373] pci 0000:00:1f.2: reg 0x10: [io 0x1060-0x1067]
[ 0.140391] pci 0000:00:1f.2: reg 0x14: [io 0x1070-0x1073]
[ 0.140409] pci 0000:00:1f.2: reg 0x18: [io 0x1068-0x106f]
[ 0.140427] pci 0000:00:1f.2: reg 0x1c: [io 0x1074-0x1077]
[ 0.140444] pci 0000:00:1f.2: reg 0x20: [io 0x1040-0x105f]
[ 0.140461] pci 0000:00:1f.2: reg 0x24: [mem 0xe0705000-0xe07057ff]
[ 0.140568] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.140707] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.140738] pci 0000:00:1f.3: reg 0x10: [mem 0xe0706000-0xe07060ff 64bit]
[ 0.140781] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.140941] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.140981] pci 0000:00:1f.6: reg 0x10: [mem 0xe0704000-0xe0704fff 64bit]
[ 0.141361] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[ 0.141432] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
[ 0.141586] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
[ 0.141772] pci 0000:01:00.0: supports D1 D2
[ 0.141776] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.146966] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.146982] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.147186] pci 0000:02:00.0: [14e4:16b5] type 00 class 0x020000
[ 0.147261] pci 0000:02:00.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit pref]
[ 0.147314] pci 0000:02:00.0: reg 0x18: [mem 0xe0510000-0xe051ffff 64bit pref]
[ 0.147412] pci 0000:02:00.0: reg 0x30: [mem 0xe0600000-0xe06007ff pref]
[ 0.147646] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.147839] pci 0000:02:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.147913] pci 0000:02:00.1: reg 0x10: [mem 0xe0520000-0xe052ffff 64bit pref]
[ 0.148270] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[ 0.153657] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.153672] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
[ 0.153686] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[ 0.153903] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.153995] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.154081] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.154165] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.154248] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.154330] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.154413] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.154495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.155375] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 0.155452] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.155654] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.155658] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.155664] vgaarb: loaded
[ 0.155666] vgaarb: bridge control possible 0000:00:02.0
[ 0.155751] PCI: Using ACPI for IRQ routing
[ 0.159478] PCI: pci_cache_line_size set to 64 bytes
[ 0.159577] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[ 0.159581] e820: reserve RAM buffer [mem 0xacee4000-0xafffffff]
[ 0.159584] e820: reserve RAM buffer [mem 0x14f600000-0x14fffffff]
[ 0.159796] NetLabel: Initializing
[ 0.159799] NetLabel: domain hash size = 128
[ 0.159801] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.159829] NetLabel: unlabeled traffic allowed by default
[ 0.159874] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.159885] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.161931] Switched to clocksource hpet
[ 0.171668] pnp: PnP ACPI init
[ 0.171847] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.171852] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.171857] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.171861] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.171865] system 00:00: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.171869] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.171873] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.171877] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.171881] system 00:00: [mem 0x20000000-0x201fffff] has been reserved
[ 0.171885] system 00:00: [mem 0x40000000-0x401fffff] has been reserved
[ 0.171891] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172584] system 00:01: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.172590] system 00:01: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.172671] system 00:02: [io 0x0500-0x057f] could not be reserved
[ 0.172676] system 00:02: [io 0x0480-0x04bf] has been reserved
[ 0.172681] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172727] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.172802] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.172844] pnp: PnP ACPI: found 5 devices
[ 0.181140] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.181153] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.181169] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.181179] pci 0000:00:1c.1: bridge window [mem 0xe0600000-0xe06fffff]
[ 0.181187] pci 0000:00:1c.1: bridge window [mem 0xe0500000-0xe05fffff 64bit pref]
[ 0.181201] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.181205] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.181209] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.181212] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.181216] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.181219] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.181223] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.181226] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.181230] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.181233] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.181237] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.181240] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.181243] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.181247] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.181250] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.181254] pci_bus 0000:00: resource 19 [mem 0xafa00000-0xfebfffff]
[ 0.181257] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.181262] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.181266] pci_bus 0000:02: resource 1 [mem 0xe0600000-0xe06fffff]
[ 0.181269] pci_bus 0000:02: resource 2 [mem 0xe0500000-0xe05fffff 64bit pref]
[ 0.181319] NET: Registered protocol family 2
[ 0.181671] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.181835] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.181980] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.182017] TCP: reno registered
[ 0.182031] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.182066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.182162] NET: Registered protocol family 1
[ 0.182192] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.182773] PCI: CLS 64 bytes, default 64
[ 0.182860] Unpacking initramfs...
[ 0.302677] Freeing initrd memory: 3232K (ffff8800379a0000 - ffff880037cc8000)
[ 0.302693] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.302698] software IO TLB [mem 0xa8ee4000-0xacee4000] (64MB) mapped at [ffff8800a8ee4000-ffff8800acee3fff]
[ 0.302960] RAPL PMU detected, hw unit 2^-16 Joules, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ 0.303038] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x28
[ 0.303051] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x28
[ 0.303148] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.303201] Scanning for low memory corruption every 60 seconds
[ 0.303637] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.303657] Initialise system trusted keyring
[ 0.304287] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.307213] zpool: loaded
[ 0.307219] zbud: loaded
[ 0.307572] VFS: Disk quotas dquot_6.5.2
[ 0.307644] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.307867] msgmni has been set to 7783
[ 0.307975] Key type big_key registered
[ 0.308262] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.308317] io scheduler noop registered
[ 0.308322] io scheduler deadline registered
[ 0.308380] io scheduler cfq registered (default)
[ 0.308697] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.308978] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.309161] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.309165] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.309172] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.309208] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.309212] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.309215] pci 0000:02:00.1: Signaling PME through PCIe PME interrupt
[ 0.309223] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.309253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.309285] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.309344] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.309346] vesafb: scrolling: redraw
[ 0.309350] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.309380] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90004780000, using 4160k, total 4160k
[ 0.315773] Console: switching to colour frame buffer device 170x48
[ 0.321847] fb0: VESA VGA frame buffer device
[ 0.321882] intel_idle: MWAIT substates: 0x21120
[ 0.321884] intel_idle: v0.4 model 0x2A
[ 0.321887] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.322122] GHES: HEST is not enabled!
[ 0.322261] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.323099] Linux agpgart interface v0.103
[ 0.323175] rtc_cmos 00:03: RTC can wake from S4
[ 0.323405] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 0.323444] rtc_cmos 00:03: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.323464] Intel P-state driver initializing.
[ 0.323700] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.323974] TCP: cubic registered
[ 0.324249] NET: Registered protocol family 10
[ 0.324810] NET: Registered protocol family 17
[ 0.325630] Loading compiled-in X.509 certificates
[ 0.325667] registered taskstats version 1
[ 0.326469] Magic number: 2:425:406
[ 0.326624] rtc_cmos 00:03: setting system clock to 2014-10-27 00:25:43 UTC (1414369543)
[ 0.326771] PM: Hibernation image not present or could not be loaded.
[ 0.328979] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.328984] Write protecting the kernel read-only data: 8192k
[ 0.334234] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
[ 0.336362] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
[ 0.352574] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.355532] systemd-udevd[47]: starting version 216
[ 0.387858] ACPI: bus type USB registered
[ 0.387913] usbcore: registered new interface driver usbfs
[ 0.387936] usbcore: registered new interface driver hub
[ 0.388039] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.388042] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.391270] usbcore: registered new device driver usb
[ 0.392129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.392223] sdhci: Secure Digital Host Controller Interface driver
[ 0.392228] sdhci: Copyright(c) Pierre Ossman
[ 0.392414] ehci-pci: EHCI PCI platform driver
[ 0.392656] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.392671] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.392674] sdhci-pci 0000:02:00.1: SDHCI controller found [14e4:16bc] (rev 10)
[ 0.392714] ehci-pci 0000:00:1a.0: debug port 2
[ 0.393158] sdhci-pci 0000:02:00.1: No vmmc regulator found
[ 0.393163] sdhci-pci 0000:02:00.1: No vqmmc regulator found
[ 0.395522] mmc0: SDHCI controller on PCI [0000:02:00.1] using ADMA
[ 0.397372] SCSI subsystem initialized
[ 0.400613] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.400649] ehci-pci 0000:00:1a.0: irq 21, io mem 0xe0705800
[ 0.402598] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.402906] libata version 3.00 loaded.
[ 0.408631] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.408994] hub 1-0:1.0: USB hub found
[ 0.409010] hub 1-0:1.0: 3 ports detected
[ 0.409474] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.409486] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.409509] ehci-pci 0000:00:1d.0: debug port 2
[ 0.413433] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.413449] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe0705c00
[ 0.421967] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.422311] hub 2-0:1.0: USB hub found
[ 0.422325] hub 2-0:1.0: 3 ports detected
[ 0.422611] ahci 0000:00:1f.2: version 3.0
[ 0.422819] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 0.422858] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 0.422890] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
[ 0.422896] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pio slum part apst
[ 0.425306] scsi host0: ahci
[ 0.427777] scsi host1: ahci
[ 0.430423] scsi host2: ahci
[ 0.431139] scsi host3: ahci
[ 0.431256] ata1: SATA max UDMA/133 abar m2048@0xe0705000 port 0xe0705100 irq 26
[ 0.431260] ata2: DUMMY
[ 0.431262] ata3: DUMMY
[ 0.431265] ata4: DUMMY
[ 0.475720] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.715469] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.748738] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 0.760911] ata1.00: ATA-8: MKNSSDCR120GB-7, 582ABBF0, max UDMA/133
[ 0.760921] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 0.770881] ata1.00: configured for UDMA/133
[ 0.771363] scsi 0:0:0:0: Direct-Access ATA MKNSSDCR120GB-7 BBF0 PQ: 0 ANSI: 5
[ 0.782066] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[ 0.782627] sd 0:0:0:0: [sda] Write Protect is off
[ 0.782637] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.782810] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.785152] sda: sda1 sda2 sda3
[ 0.786014] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.839907] hub 1-1:1.0: USB hub found
[ 0.840119] hub 1-1:1.0: 4 ports detected
[ 0.935913] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 0.945475] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.069643] hub 2-1:1.0: USB hub found
[ 1.069827] hub 2-1:1.0: 4 ports detected
[ 1.148949] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[ 1.233928] usb 1-1.1: string descriptor 0 read error: -22
[ 1.290134] EXT4-fs (sda1): re-mounted. Opts: data=ordered
[ 1.305272] tsc: Refined TSC clocksource calibration: 1097.506 MHz
[ 1.315437] usb 1-1.3: new high-speed USB device number 4 using ehci-pci
[ 1.344309] systemd-udevd[136]: starting version 216
[ 1.352295] systemd-journald[119]: Received request to flush runtime journal from PID 1
[ 1.607498] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.610413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 1.610471] ACPI: Lid Switch [LID0]
[ 1.610565] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 1.610572] ACPI: Power Button [PWRB]
[ 1.610653] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3
[ 1.610657] ACPI: Sleep Button [TPAD]
[ 1.610758] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 1.610763] ACPI: Power Button [PWRF]
[ 1.626490] mei_me 0000:00:16.0: irq 27 for MSI/MSI-X
[ 1.645724] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.645942] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
[ 1.653739] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.653745] ACPI: Thermal Zone [THRM] (0 C)
[ 1.660772] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 1.665282] ACPI: Battery Slot [BATX] (battery present)
[ 1.666038] ACPI: AC Adapter [AC] (on-line)
[ 1.681337] ACPI Warning: SystemIO range 0x0000000000000528-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000057f (\PMIO) (20140724/utaddress-258)
[ 1.681351] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681358] ACPI Warning: SystemIO range 0x00000000000004c0-0x00000000000004cf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[ 1.681364] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681367] ACPI Warning: SystemIO range 0x00000000000004b0-0x00000000000004bf conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[ 1.681374] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681376] ACPI Warning: SystemIO range 0x0000000000000480-0x00000000000004af conflicts with OpRegion 0x0000000000000480-0x00000000000004eb (\GPIO) (20140724/utaddress-258)
[ 1.681382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 1.681385] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 1.688249] [drm] Initialized drm 1.1.0 20060810
[ 1.691201] pps_core: LinuxPPS API ver. 1 registered
[ 1.691207] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
[ 1.700706] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 1.701200] PTP clock support registered
[ 1.706524] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 1.752871] tg3.c:v3.137 (May 11, 2014)
[ 1.753314] Adding 8167872k swap on /dev/sda2. Priority:-1 extents:1 across:8167872k SSFS
[ 1.757127] Bluetooth: Core ver 2.19
[ 1.757151] NET: Registered protocol family 31
[ 1.757154] Bluetooth: HCI device and connection manager initialized
[ 1.757166] Bluetooth: HCI socket layer initialized
[ 1.757170] Bluetooth: L2CAP socket layer initialized
[ 1.757180] Bluetooth: SCO socket layer initialized
[ 1.771585] usbcore: registered new interface driver btusb
[ 1.771864] snd_hda_intel 0000:00:1b.0: irq 28 for MSI/MSI-X
[ 1.777240] cfg80211: Calling CRDA to update world regulatory domain
[ 1.812626] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 1.812635] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 1.812640] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 1.812643] sound hdaudioC0D0: mono: mono_out=0x0
[ 1.812646] sound hdaudioC0D0: inputs:
[ 1.812650] sound hdaudioC0D0: Internal Mic=0x1b
[ 1.812654] sound hdaudioC0D0: Mic=0x19
[ 1.819178] tg3 0000:02:00.0 eth0: Tigon3 [partno(BCM57785) rev 57785100] (PCI Express) MAC address 20:89:84:c7:a0:92
[ 1.819187] tg3 0000:02:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 1.819192] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 1.819196] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 1.834640] media: Linux media interface: v0.10
[ 1.845475] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input7
[ 1.849543] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 1.850477] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 1.850623] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 1.851058] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 1.851353] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 1.860140] iTCO_vendor_support: vendor-support=0
[ 1.861704] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.861764] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0560)
[ 1.862721] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.863690] Linux video capture interface: v2.00
[ 1.875723] usbcore: registered new interface driver ath3k
[ 1.914247] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
[ 1.926001] systemd-udevd[145]: renamed network interface eth0 to enp2s0f0
[ 1.938186] usb 1-1.1: USB disconnect, device number 3
[ 1.944872] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b336)
[ 1.953353] input: HD WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input13
[ 1.953679] usbcore: registered new interface driver uvcvideo
[ 1.953684] USB Video Class driver (1.1.1)
[ 1.997073] intel_rapl: Found RAPL domain package
[ 1.997080] intel_rapl: Found RAPL domain core
[ 1.997083] intel_rapl: Found RAPL domain uncore
[ 1.999325] [drm] Memory usable by graphics device = 2048M
[ 1.999330] [drm] Replacing VGA console driver
[ 1.999337] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 1.999340] fb: switching to inteldrmfb from VESA VGA
[ 1.999399] Console: switching to colour dummy device 80x25
[ 2.006114] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 2.006130] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.006133] [drm] Driver supports precise vblank timestamp query.
[ 2.006275] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.010165] input: Cypress APA Trackpad (cyapa) as /devices/pci0000:00/0000:00:1f.3/i2c-0/0-0067/input/input14
[ 2.014824] mousedev: PS/2 mouse device common for all mice
[ 2.037823] ath: phy0: ASPM enabled: 0x43
[ 2.037831] ath: EEPROM regdomain: 0x6c
[ 2.037834] ath: EEPROM indicates we should expect a direct regpair map
[ 2.037838] ath: Country alpha2 being used: 00
[ 2.037840] ath: Regpair used: 0x6c
[ 2.044014] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 2.044617] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc90004980000, irq=17
[ 2.050867] ath9k 0000:01:00.0 wlp1s0: renamed from wlan0
[ 2.054438] fbcon: inteldrmfb (fb0) is primary device
[ 2.054543] Console: switching to colour frame buffer device 170x48
[ 2.054559] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.054563] i915 0000:00:02.0: registered panic notifier
[ 2.066878] systemd-udevd[145]: renamed network interface wlan0 to wlp1s0
[ 2.070905] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
[ 2.125455] usb 1-1.1: new full-speed USB device number 5 using ehci-pci
[ 2.154830] tg3 0000:02:00.0: irq 30 for MSI/MSI-X
[ 2.154842] tg3 0000:02:00.0: irq 31 for MSI/MSI-X
[ 2.154849] tg3 0000:02:00.0: irq 32 for MSI/MSI-X
[ 2.714571] Switched to clocksource tsc
[ 2.714588] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[ 2.731648] usb 1-1.1: string descriptor 0 read error: -22
[ 2.850571] random: nonblocking pool is initialized
lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 04f2:b336 Chicony Electronics Co., Ltd
Bus 001 Device 005: ID 0489:e04e Foxconn / Hon Hai
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

DRM Export creation issue

Hi all, I'm facing issue with POC at the customer site.
I cannot create any type of export.
DRM 11.1.2.1.000 has been installed on Win 2008 server 64 bit machine - polish locale.
I applied straight away after installtion 105 patch. Repositor has been created. We needed later to change server locale to english US.
I imported customer's hierarchies fine and when I tried to create any type of export I'm getting following message:
There was an error proressing your request
The server returned an error: The added or subtracted value results in an un-representable DateTime. Parameter name: value
I tried to google the issue - not successful - only one thread on OTN but not with resolution.
I applied 106 patchset and still getting the same issue.
Other things work slick in DRM in range I needed so far.
Could you please forward to somebody that faced that issue if you're not familiar with
Edited by: jastrzab on 2012-05-30 09:01

Hi,
We encountered the same problem running DRM exports in Ireland.
Subsequently discovered the following SR opened by Oracle :
SR: 3-5740964101 opened for the issue are having with running exports from DRM.
Problem Description: Trying to run or save an export in DRM gives the following error message:
+"The added or subtracted value results in an unrepresentable DateTime. Paramater name: value"+
This error only occurs for non-US (in Ireland) where the DRM instance is hosted in the US; this error does not occur for US based users.
We resolved this by installing patch Hyperion Data Relationship Management 11.1.2.1.107 Patch Set Update

Problems with Dynamic Remastering (DRM) with 10.2.0.4 on Linux Itanium

One of my customers is having severe RAC performance issues, which appeared three times so far. Each time, the performance impact lasted around 10 minutes and caused basically a hang of the application. ASH investigation revealed that the time frame of performance issues exactly matches a DRM operation of the biggest segment of the database. During the problematic time period, there are +50 instead of 2-3 active sessions and they are mostly waiting for gc related events: "gc buffer busy","gc cr block busy", "gc cr block 2-way", "gc current block 2-way", "gc current request", "gc current grant busy", etc.
In addition, there is one single session which has wait event "kjbdrmcvtq lmon drm quiesce: ping completion" (on instance 1) and 1-3 sessions with wait event "gc remaster". (on instance 2)
Does anybody have any experience with DRM problems with 10.2.0.4 on Linux Itanium?
I know that it is possible to deactive DRM, but usually it should be beneficial to have it enabled. I could not find any reports of performance impact during DRM operation on metalink. Support is involved but clueless.
Regards,
Martin

Oracle Support has requested stacktraces of lms processes during the period of performance degradation. We decided to enable OSWatcher to get systemwide linux data and procwatcher to get lms process stacktraces. We created a Grid Control User Defined Metric to check whether the symptoms of a DRM performance problem is taking place. Then we triggered the lms stacktraces with a Grid Control Response Action script of the UDM.
Oracle Support has also requested global hanganalyze and system state dumps but we decided not to collect system state dumps because of the big additional performance impact.
The oswatcher data showed that during the drm period, the lms processes had very high CPU resource utilization.
In the meantime Oracle Support has confirmed that we are hitting 6960699. We have received patch 8516675 which includes the bugfix and have installed it. Now, we are waiting to see whether this indeed fixes the issue.

Problem installing DRM 11.1.1.2.01 on Win7 x64

I am trying to apply the DRM v11.1.1.2 patch 01 server installation on my Win 7 Ultimate 64-bit OS. But the installation quits abruptly, leaving just an error message in the application event log (below).
I have also tried the 11.1.1.2 installer, but with the same result.
In the installation docs, all I can find about installing on an 64-bit OS, is that .Net 2.0 x64 must be installed prior to applying DRM. Which it is.
Anybody successfully installed DRM on Win 7 x64, or have any ideas on how to solve this?
Appreciate input on this issue.
Best regards,
Eigil Økstad
The event log message:
Fault bucket 792032619, type 5
Event Name: PCA2
Response: Not available
Cab Id: 0
Problem signature:
P1: mdm_server_setup.exe
P2: 14.0.0.162
P3: Setup Launcher
P4: Oracle Hyperi
P5: Oracle
P6: 1
P7: 200
P8:
P9:
P10:
Attached files:
C:\Users\mdm_system\AppData\Local\Temp\{413e2f5b-b88e-4828-822e-0e77302a2faa}\appcompat.txt
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\NonCritical_mdm_server_setup_f732f3c7a6f3b124ccc09469fe7ac4e4a2b92b_16c00dc0
Analysis symbol:
Rechecking for solution: 0
Report Id: 1ef57337-df2d-11de-ae74-001e37f667b8
Report Status: 0

The install docs says for Windows 98 Second Edition... Link below...
http://java.sun.com/products/archive/j2se/1.4.2_01/jre/install-windows.html
You should upgrade to Windows 98 SE anyway...
-MaxxDmg...

Boolean property export issue in DRM

Hi All,
We have a boolean property in DRM. In DRM 1.1.2, when we export this property to Database, it populates value as -1 for True and 0 for false.
But in DRM 1.2.2, the values appear as TRUE/FALSE in the column in the database. Is this an expected change in the DRM behaviour?
This is causing problems in our integration logic.
Any help on this would be appreciated.
Thanks & Regards,
Prasad

Hi Shashank,
With the latest patch .306 and a series of prior ones , its more like the Character encoding sets have started working in DRM and they will slip in special characters here and there, I have faced this with the latest releases of DRM.
It would be advisable to use US ASCII encoding or Western European Windows.. that should solve your issue.
If you have to make changes on all the exports and if they are too many in number then search xml tag
<drm:CodePage>20127</drm:CodePage>
and make sure the code page is 20127 which represents US ASCII.

Hyperion DRM SDK 11.1.1 vs. WDK 11.1.2

We're implementing DRM 11.1.2 and will need to do some custom work.
I've downloaded both the WDK and the SDK from: http://www.oracle.com/technetwork/middleware/data-relationship-management/downloads/index.html
The WDK is at version 11.1.2 and the SDK is at 11.1.1. Is the version difference significant? I can't find anything that states whether the SDK (which uses a Java API) will continue to be supported or if Oracle is trying to move everyone to the WDK (which uses Web Services).
Does anyone know why the SDK / Java API is still a version behind?

Have to disagree with previous, 11.1.2 has many bugs apparently, even with the next patch due shortly, have been advised to avoid it for another 6 months. Just went from 9.3.2 to 11.1.12 with only one problem; labels no longer update in exports if you change them. Told they did this to help performance issues.

Hal-flash to watch DRM-protected content in firefox

Hi guys,
I'm facing a weird problem that I cannot find solution for.
I have followed wiki and installed hal-flash + udisks2 on my desktop PC since I wanted to watch some DRM-protected content on internet (person of interest to be precise). All worked great.
But then my wife, who also is running Arch on her laptop (samsung 900x series) wanted to watch the same content on it.
So I quickly ssh-ed to her laptop, installed exactly the same hal-flash and udisks2 + I also removed all the firefox cache - but no success, flash video that is playing nicely on my PC does not play on her laptop.
I checked all relevant software version (that is firefox, hal-flash, udisks2) - the same on both PC and laptop. To my simple understanding it should work on both computers...
I'm feeling a bit dumb because I told my wife using linux will be as easy as using windws and now it seems I cannot figure out something that seems to be a 'simple thing' from her point of view (obviously after reading wiki I know it's a bit more complex and in the same time interesting issue)...
So I humbly ask somebody to direct me what may be wrong here?
Last edited by Gregosky (2015-05-05 22:46:57)

Ok, so I installed pipelight and also I enabled flash - however flash is not appearing on the list of plugins. So I removed my flashplugin (the standard one I installed when setting up firefox) - it seems firefox does not recognise that there is a plugin installed... Trilby, should flash appear on about:plugins page?
--edit--
It seems browser should be closed when installing wine-silverlight. I uninstalled pipelight, closed the browser and installed again - now plugin appears however it's showing error:
[PIPELIGHT:LIN:unknown] attached to process.
[PIPELIGHT:LIN:unknown] checking environment variable PIPELIGHT_SILVERLIGHT5_1_CONFIG.
[PIPELIGHT:LIN:unknown] searching for config file pipelight-silverlight5.1.
[PIPELIGHT:LIN:unknown] trying to load config file from '/home/izulka/.config/pipelight-silverlight5.1'.
[PIPELIGHT:LIN:unknown] trying to load config file from '/etc/pipelight-silverlight5.1'.
[PIPELIGHT:LIN:unknown] trying to load config file from '/usr/share/pipelight/configs/pipelight-silverlight5.1'.
[PIPELIGHT:LIN:unknown] sandbox not found or not installed!
[PIPELIGHT:LIN:silverlight5.1] using wine prefix directory /home/izulka/.wine-pipelight.
[PIPELIGHT:LIN:silverlight5.1] checking plugin installation - this might take some time.
[install-dependency] wine-silverlight5.1-installer is already installed in '/home/izulka/.wine-pipelight'.
[install-dependency] wine-mpg2splt-installer is already installed in '/home/izulka/.wine-pipelight'.
fixme:winediag:start_process Wine Staging is a testing version containing experimental patches.
fixme:winediag:start_process Please report bugs at http://bugs.wine-staging.com (instead of winehq.org).
wine: cannot find L"C:\\windows\\system32\\winemenubuilder.exe"
err:wineboot:ProcessRunKeys Error running cmd L"C:\\windows\\system32\\winemenubuilder.exe -a -r" (2)
[PIPELIGHT:WIN:silverlight5.1] embedded mode is on.
[PIPELIGHT:WIN:silverlight5.1] windowless mode is off.
[PIPELIGHT:WIN:silverlight5.1] linux windowless mode is off.
[PIPELIGHT:WIN:silverlight5.1] force SetWindow is off.
[PIPELIGHT:WIN:silverlight5.1] window class hook is on.
[PIPELIGHT:WIN:silverlight5.1] strict draw ordering is off.
fixme:ole:RemUnknown_QueryInterface No interface for iid {00000019-0000-0000-c000-000000000046}
[PIPELIGHT:WIN:silverlight5.1] replaced API function CreateWindowExA.
[PIPELIGHT:WIN:silverlight5.1] replaced API function CreateWindowExW.
[PIPELIGHT:WIN:silverlight5.1] replaced API function TrackPopupMenuEx.
[PIPELIGHT:WIN:silverlight5.1] replaced API function TrackPopupMenu.
err:virtual:map_file_into_view failed to set 00000007 protection on file map, noexec filesystem?
[PIPELIGHT:WIN:silverlight5.1] pluginloader.c:371:initDLL(): could not load library 'npctrl.dll' (last error = 193).
[PIPELIGHT:WIN:silverlight5.1] pluginloader.c:786:main(): failed to initialize DLL.
[PIPELIGHT:LIN:silverlight5.1] common.c:168:receiveCommand(): unable to receive data.
[PIPELIGHT:LIN:silverlight5.1] basicplugin.c:128:attach(): error during the initialization of the wine process - aborting.
Last edited by Gregosky (2015-05-11 07:25:06)

[SOLVED] How do I patch the kernel?

EDIT (again): Doesn't seem like the patch is needed anymore. 3.3.1 kernel from the repos seems identical to my custom kernel (also 3.3.1).
EDIT: The patches are for an older kernel but I was able to apply them manually.
Hello. I'm trying to patch the kernel using the patch found on this page: http://lists.freedesktop.org/archives/i … 09584.html
Now, I don't know much about patching but the patch in that post looks more like the program output of several diff commands. How do I format this to create a valid .patch file?
Last edited by Splooshie123 (2012-04-10 04:52:40)

To get back to my original question, making a patch out of what was in that mailing list post:
Does this look ok?
drivers/gpu/drm/i915/i915_drv.c | 4 ++++
drivers/gpu/drm/i915/i915_drv.h | 1 +
drivers/gpu/drm/i915/intel_display.c | 34 +++++++++++++++++++++-------------
3 files changed, 26 insertions(+), 13 deletions(-)
diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c
index 004880aa3a948669b8b4e23d9ad73d132cff81d0..1d88f059a27321ecb681e2b7927bb69029fcb49a 100644
--- a/drivers/gpu/drm/i915/i915_drv.c
+++ b/drivers/gpu/drm/i915/i915_drv.c
@@ -49,6 +49,10 @@ module_param_named(powersave, i915_powersave, int, 0600);
unsigned int i915_lvds_fixed = 1;
module_param_named(lvds_fixed, i915_lvds_fixed, int, 0600);
+unsigned int i915_lvds_channels = 0;
+module_param_named(lvds_channels, i915_lvds_channels, int, 0600);
+MODULE_PARM_DESC(lvds_channels, "LVDS channels in use: 0=(default) probe hardware 1=single 2=dual");
+
unsigned int i915_lvds_downclock = 0;
module_param_named(lvds_downclock, i915_lvds_downclock, int, 0400);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 3fa8681459aa596e12e885568e5b48f0c9a60719..a6aab43e5f39f2d5b92a69a284bf8f72a254ea7c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -886,6 +886,7 @@ extern int i915_max_ioctl;
extern unsigned int i915_fbpercrtc;
extern unsigned int i915_powersave;
extern unsigned int i915_lvds_fixed;
+extern unsigned int i915_lvds_channels;
extern unsigned int i915_lvds_downclock;
extern unsigned int i915_lvds_24bit;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 09f57f29c30c371c213944be473090a780a287db..4dc91400edd8935be45a229cf91292339bca0ce8 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -642,6 +642,20 @@ static const intel_limit_t intel_limits_ironlake_display_port = {
.find_pll = intel_find_pll_ironlake_dp,
+static int intel_is_dual_channel_mode(struct drm_crtc *crtc)
+{
+ struct drm_device *dev = crtc->dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ if (i915_lvds_channels) {
+ /* User has specified desired channel mode */
+ return (i915_lvds_channels == 2);
+ }
+
+ /* User has not specified mode so let's see
+ what the hardware is doing. */
+ return ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) == LVDS_CLKB_POWER_UP);
+}
+
static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
struct drm_device *dev = crtc->dev;
@@ -653,8 +667,7 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
if (dev_priv->lvds_use_ssc && dev_priv->lvds_ssc_freq == 100)
refclk = 100;
- if ((I915_READ(PCH_LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP) {
+ if (intel_is_dual_channel_mode(crtc)) {
/* LVDS dual channel */
if (refclk == 100)
limit = &intel_limits_ironlake_dual_lvds_100m;
@@ -677,18 +690,16 @@ static const intel_limit_t *intel_ironlake_limit(struct drm_crtc *crtc)
static const intel_limit_t *intel_g4x_limit(struct drm_crtc *crtc)
- struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
const intel_limit_t *limit;
if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) {
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (intel_is_dual_channel_mode(crtc)) {
/* LVDS with dual channel */
limit = &intel_limits_g4x_dual_channel_lvds;
- else
- /* LVDS with dual channel */
+ } else {
+ /* LVDS with single channel */
limit = &intel_limits_g4x_single_channel_lvds;
+ }
} else if (intel_pipe_has_type(crtc, INTEL_OUTPUT_HDMI) ||
intel_pipe_has_type(crtc, INTEL_OUTPUT_ANALOG)) {
limit = &intel_limits_g4x_hdmi;
@@ -821,8 +832,7 @@ intel_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
* reliably set up different single/dual channel state, if we
* even can.
- if ((I915_READ(LVDS) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (intel_is_dual_channel_mode(crtc))
clock.p2 = limit->p2.p2_fast;
else
clock.p2 = limit->p2.p2_slow;
@@ -871,7 +881,6 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
int target, int refclk, intel_clock_t *best_clock)
struct drm_device *dev = crtc->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
intel_clock_t clock;
int max_n;
bool found;
@@ -886,8 +895,7 @@ intel_g4x_find_best_PLL(const intel_limit_t *limit, struct drm_crtc *crtc,
lvds_reg = PCH_LVDS;
else
lvds_reg = LVDS;
- if ((I915_READ(lvds_reg) & LVDS_CLKB_POWER_MASK) ==
- LVDS_CLKB_POWER_UP)
+ if (intel_is_dual_channel_mode(crtc))
clock.p2 = limit->p2.p2_fast;
else
clock.p2 = limit->p2.p2_slow;

ERROR DRM

kept getting the error message Adobe DRM from my samsung galaxy s4 phone using the app Aldiko to open an e book, wondering why since its opened before, Kept saying can not authorize device

Hi,
PSU = Patch Set Update
I downloaded it from Oracle Support (http://support.oracle.com)
Logon to Oracle support -> Click "Patches & Updates" -> enter the patch number 13810554
-> select your plattform and hit search.
You can download it from here.
Best regards,
mwi

Patch for Toshiba nb305 controlling fn screen brightness

kernel patch is available here:
https://bugzilla.kernel.org/attachment.cgi?id=27236
it works and it is safe (tested) against: 2.6.34.x 2.6.35.x and zen (remember to backup drivers/gpu/drm/i915/i915_opregion.c if using git)

Do you like it?
yes, it suits the purpose: photo editing while on the trip (good battery life).
I had to customize a lot of things. This did not take much time but with Toshiba you are on your own as most users have Acer netbooks or AOpen and there is Arch wiki help for these, while Toshiba netbook does not have wiki entry.
The only thing that does not work is suspend to RAM (kernel unable to handle dynamic CPU settings in BIOS), however suspend to disk works very well and system wakes up in less that 5s so I do not miss suspend to RAM very much.

Trying to get suspend/resume on laptop. help me patch kernel

Hello, please help me up on this one, I'm rather new to Archlinux (couple months) but i really like it and feel confortable with it.
My problem is this, i have a laptop with an ATI card (ati radeon xpress 200m), which recently was running fine with the catalyst driver on a downgraded system (kernel 2.6.29). After reading about the new radeon driver and KMS support on the new kernel i decided to try it out and update my system.
Almost everything works fine, except suspension and resuming, which is strange since the site http://www.x.org/wiki/RadeonFeature marks suspension support as "done" for my card.
If I undestood right, the issue is related to DRI (which i want to be on) explained in this bug https://bugs.launchpad.net/ubuntu/+sour … mments=all
In that bug, there's a link to a patch that has solved the issue on some machines http://git.kernel.org/?p=linux/kernel/g … 74d1173f23
I've tried to compile the kernel and patch the file rs400.c but i get an error, it seems i dont know how to patch or some change must be done to the patch to work on ARCH.
please help me patch the kernel, i've followed the archwiki without results. i have installed abs and copied the core/kernel26 folder to my home.
How could i successfuly apply the patch to the 2.6.31 kernel?
$ lspci | grep -i vga
01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon Xpress 200M]
$ pacman -Q | grep kernel26\
kernel26 2.6.31.5-1
$ pacman -Q | grep video-ati
xf86-video-ati 6.12.99.git20091014-1
I get this error while trying to patch:
$ patch src/linux-2.6.31/drivers/gpu/drm/radeon/rs400.c linux-next.git-ea1495a6274c9542a168337536f8ce74d1173f23.patch
missing header for unified diff at line 1 of patch
patching file src/linux-2.6.31/drivers/gpu/drm/radeon/rs400.c
Hunk #1 FAILED at 418.
1 out of 1 hunk FAILED -- saving rejects to file src/linux-2.6.31/drivers/gpu/drm/radeon/rs400.c.rej
Last edited by andreamer (2009-11-09 01:43:33)

You cannot use this patch for 2.6.31 kernels. It is for the upcoming 2.6.32 release. You should wait until 2.6.32 gets released or, if you are the adventurous type of person, use the latest 2.6.32-rc kernel from www.kernel.org. You will have to compile it yourself, though.

Drm web services deploying

we applied patch 11.1.2.3.500 on 11.1.2.3. and the patch has successfully completed.and we have some problem with deployment.
in read me it was mentioned as below
Optional: Redeploy the Data Relationship
Management Web service application (oracle-epm-drm-webservices.ear) to Oracle
Weblogic. The oracle-epm-drm-webservices.ear file is located in the
%EPM_ORACLE_HOME%\products\DataRelationshipManagement\api directory.This step is only required if
applying this patch to an 11.1.2.3.000 installation where the Web service application
has been previously deployed. See the “Redeploying a Web Services
Application” section in the Oracle® Fusion Middleware Security and
Administrator's Guide for Web Services for instructions to redeploy using
Oracle Enterprise Manager.
we tried to redeploy but when we look into oracle weblogic server we dint find erp drm webservices on weblogic server. i think it is not deployed previously. any other way to find weather it is deploed eaerlier.
if it is not deployed how to proceed further.

Hello,
Please ingnore this step becuase in your ENV that .ear is not deployed hence you can ingorne it..Essentially this .ear file is used for communication between EPM and DRM.while setup API adapter then it has to be deploy (this ear file).
Thanks
Subbarao

Req: Muvo2 Firmware upgrade for Janus DRM compatibil

We would like to have an opportunity to use subscription based services offered by Yahoo and Napster.
Please make the Muvo2 Janus DRM compatible.

I bought the Muvo2 last month. WMP 0 has been out since June 2004 now and was in beta for a long time before that.
WMP DRM since a year has implied WMP 0 DRM. And the creative webpage on DRM still has Muvo2 listed under DRM compatible devices.
This is akin to saying a laptop is Windows XP compatible but will not be compatible with the update patches. Or buying a iPod that doesnt work with iTunes 5.0 when it comes out.
<A href="]http://dmzweb3.europe.creative.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=380,E=0000000000058450325,K=645,Sxi=0,Case=obj (4784),Kb=ww_english,VARSET=ws:http://us.creative.com/[/url]
^^^ First search page on DRM on creative site and it says Muvo2 is DRM compatible.
IMHO, its a blatant misrepresentation.

DRM patch

Similar Messages

Maybe you are looking for