DRM services are not getting up..

Hi,
We have had changed the password for our windows account after which my DRM services is not getting up. the same is working fine with one of the environemnt(prod) but issue is with DEV.
please suggest. thanks
Regards,
Raj

Hi,
thanks for your response.
yes, DRM service runs under this account the the passwrod was chang COM+ apps etc). we restarted IIS and even reboot machine. event viewer doesnt say much. not sure what went wrong.
Regards,
Raj

Similar Messages

App testing phase: Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered

We are testing an app at work and Push notifications are not getting delivered to certain devices (iphone 4S/ios7.0.4 and ios7.0.3 - Push never worked for these two devices for this app). Received OK responses from Apple PUSH services, but notifications not delivered to these tow devices.
PUSH notification were delivered to some of the other iOS devices: (iPhone5 / iOS 6.1.4 and iPhone5 / iOS 7.0.3)

Sounds like you have a battry issue but don't want to believe it.
If a car was running fine on one tank of gas, then you filled it up with another tank of gas and it began to run funny, one might suspect that tank of gas. But let's just say coincidence blew a valve-- would you think the new tank of gas was the culprit?
BUT WAIT!! It just might have been! The gas could have been of higher octane and put more more strain on the valves; you know, like going from 87 octane (OS6) to 93 octane (OS7) and showing you the engine was on the edge of compromise.
Sometimes you have to go with common sense. If everything else is ruled out, it must be the battery. And if it runs fine one moment in OS6 but immediately ***** in OS7, I'd believe my battery was suspect-- though comfy-- in OS6 but the OS7 showed its true power.
Moreover, if you had the answer-- or didn't want to believe someone's more competent advice-- why did you even call? You've already shown that you don't know much when you asked if you could go backwards after setting up the new OS as a new phone.
Additonally, if you're such the know-it-all, but yourself the $29 battery and put it in yourself. It's a piece of cake.
<Edited By Host>

Images from KM are not getting displayed in EP

Hi All,
I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing.
Location of the Images that I received from EP is mentioned below.
http://hostname:port no./irj/go/km/docs/documents/HP_Images/Image_123.jpg
Images are available in the location in the below mentioned path as .jpg files:-
http://hostname:port no./irj/go/km/documents/HP_Images/Image_123.jpg
Difference in both is a DOCS folder missing in between........
Is this is the reason for the image not getting displayed?
Anything more has to be done in KM part to display these images?
May I know how to solve this issue??
Regards,
Athulya

Hi,
the right path look like this: /irj/go/km/docs/<path_to_document>.
You may have to check you URL generator service settings. Here:
Configuration - Content Management - Global Services - URL Generator Service(advanced section)
and then have a look for example for the following values "Content Access Path:" and "Viewer:" normally they both have same value "/irj/go/km/docs".
Hope that will help.
best regards,
--epexpert

Logs are not getting applied in the standby database

Hello,
I have created a physical standby database and in it the logs are not getting applied..
following is an extract of the standby alert log
Wed Sep 05 07:53:59 2012
Media Recovery Log /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Error opening /u01/oracle/oradata/ABC/archives/1_37638_765704228.arc
Attempting refetch
Media Recovery Waiting for thread 1 sequence 37638
Fetching gap sequence in thread 1, gap sequence 37638-37643
Wed Sep 05 07:53:59 2012
RFS[46]: Assigned to RFS process 3081
RFS[46]: Allowing overwrite of partial archivelog for thread 1 sequence 37638
RFS[46]: Opened log for thread 1 sequence *37638* dbid 1723205832 branch 765704228
Wed Sep 05 07:55:34 2012
RFS[42]: Possible network disconnect with primary database
However, the archived files are getting copied to the standby server.
I tried registering and recovering the logs but it also failed..
Follows some of the information,
Primary
Oralce 11R2 EE
SQL> select max(sequence#) from v$log where archived='YES';
MAX(SEQUENCE#)
37668
SQL> select DEST_NAME, RECOVERY_MODE,DESTINATION,ARCHIVED_SEQ#,APPLIED_SEQ#, SYNCHRONIZATION_STATUS,SYNCHRONIZED,GAP_STATUS from v$archive_dest_status where DEST_NAME = 'LOG_ARCHIVE_DEST_3';
DEST_NAME RECOVERY_MODE DESTINATION ARCHIVED_SEQ# APPLIED_SEQ# SYNCHRONIZATION_STATUS SYNCHRONIZED GAP_STATUS
LOG_ARCHIVE_DEST_3 MANAGED REAL TIME APPLY ABC 37356 0 CHECK CONFIGURATION NO RESOLVABLE GAP
Standby
Oralce 11R2 EE
SQL> select max(sequence#) from v$archived_log where applied='YES';
MAX(SEQUENCE#)
37637
SQL> select * from v$archive_gap;
no rows selected
SQL> select open_mode, database_role from v$database;
OPEN_MODE DATABASE_ROLE
READ ONLY WITH APPLY PHYSICAL STANDBY
Please help me to troubleshoot this and get the standby in sync..
Thanks a lot..

the results are as follows..
SQL> select process, status, group#, thread#, sequence# from v$managed_standby order by process, group#, thread#, sequence#;
PROCESS STATUS GROUP# THREAD# SEQUENCE#
ARCH CLOSING 1 1 37644
ARCH CLOSING 1 1 37659
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
ARCH CONNECTED N/A 0 0
MRP0 WAIT_FOR_GAP N/A 1 37638
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS IDLE N/A 0 0
RFS RECEIVING N/A 1 37638
RFS RECEIVING N/A 1 37639
RFS RECEIVING N/A 1 37640
RFS RECEIVING N/A 1 37641
RFS RECEIVING N/A 1 37642
RFS RECEIVING N/A 1 37655
RFS RECEIVING N/A 1 37673
RFS RECEIVING N/A 1 37675
42 rows selected.
SQL>
SQL> select name,value, time_computed from v$dataguard_stats;
NAME VALUE TIME_COMPUTED
transport lag +00 02:44:33 09/05/2012 09:25:58
apply lag +00 03:14:30 09/05/2012 09:25:58
apply finish time +00 00:01:09.974 09/05/2012 09:25:58
estimated startup time 12 09/05/2012 09:25:58
SQL> select timestamp , facility, dest_id, message_num, error_code, message from v$dataguard_status order by timestamp
TIMESTAMP FACILITY DEST_ID MESSAGE_NUM ERROR_CODE MESSAGE
05-SEP-12 Remote File Server 0 60 0 RFS[13]: Assigned to RFS process 2792
05-SEP-12 Remote File Server 0 59 0 RFS[12]: Assigned to RFS process 2790
05-SEP-12 Log Apply Services 0 61 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 62 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 63 0 Managed Standby Recovery Canceled
05-SEP-12 Log Apply Services 0 64 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 65 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 66 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 67 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 68 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 69 0 RFS[5]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 70 0 RFS[6]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 71 0 RFS[14]: Assigned to RFS process 2829
05-SEP-12 Remote File Server 0 72 0 RFS[15]: Assigned to RFS process 2831
05-SEP-12 Network Services 0 73 0 RFS[9]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 74 0 RFS[16]: Assigned to RFS process 2833
05-SEP-12 Network Services 0 75 0 RFS[1]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 76 0 RFS[17]: Assigned to RFS process 2837
05-SEP-12 Network Services 0 77 0 RFS[3]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 78 0 RFS[2]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 79 0 RFS[7]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 80 0 RFS[18]: Assigned to RFS process 2848
05-SEP-12 Network Services 0 81 0 RFS[16]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 82 0 RFS[19]: Assigned to RFS process 2886
05-SEP-12 Network Services 0 83 0 RFS[19]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 84 0 RFS[20]: Assigned to RFS process 2894
05-SEP-12 Log Apply Services 0 85 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 86 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 87 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 89 0 RFS[22]: Assigned to RFS process 2900
05-SEP-12 Remote File Server 0 88 0 RFS[21]: Assigned to RFS process 2898
05-SEP-12 Remote File Server 0 90 0 RFS[23]: Assigned to RFS process 2902
05-SEP-12 Remote File Server 0 91 0 Primary database is in MAXIMUM PERFORMANCE mode
05-SEP-12 Remote File Server 0 92 0 RFS[24]: Assigned to RFS process 2904
05-SEP-12 Remote File Server 0 93 0 RFS[25]: Assigned to RFS process 2906
05-SEP-12 Log Apply Services 0 94 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 95 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 96 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 97 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Log Transport Services 0 98 0 ARCa: Beginning to archive thread 1 sequence 37644 (7911979302-7912040568)
05-SEP-12 Log Transport Services 0 99 0 ARCa: Completed archiving thread 1 sequence 37644 (0-0)
05-SEP-12 Network Services 0 100 0 RFS[8]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 101 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 102 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 103 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 104 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 105 0 RFS[20]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 106 0 RFS[26]: Assigned to RFS process 2930
05-SEP-12 Network Services 0 107 0 RFS[24]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 108 0 RFS[27]: Assigned to RFS process 2938
05-SEP-12 Network Services 0 109 0 RFS[14]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 110 0 RFS[28]: Assigned to RFS process 2942
05-SEP-12 Network Services 0 111 0 RFS[15]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 112 0 RFS[29]: Assigned to RFS process 2986
05-SEP-12 Network Services 0 113 0 RFS[17]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 114 0 RFS[30]: Assigned to RFS process 2988
05-SEP-12 Log Apply Services 0 115 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 116 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 117 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 118 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 119 0 RFS[18]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 120 0 RFS[31]: Assigned to RFS process 3003
05-SEP-12 Network Services 0 121 0 RFS[26]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 122 0 RFS[32]: Assigned to RFS process 3005
05-SEP-12 Network Services 0 123 0 RFS[27]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 124 0 RFS[33]: Assigned to RFS process 3009
05-SEP-12 Remote File Server 0 125 0 RFS[34]: Assigned to RFS process 3012
05-SEP-12 Log Apply Services 0 127 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 126 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 128 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 129 0 Managed Standby Recovery Canceled
05-SEP-12 Network Services 0 130 0 RFS[32]: Possible network disconnect with primary database
05-SEP-12 Log Apply Services 0 131 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 132 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 133 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 134 0 Managed Standby Recovery not using Real Time Apply
05-SEP-12 Log Apply Services 0 135 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 136 0 RFS[33]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 137 0 RFS[35]: Assigned to RFS process 3033
05-SEP-12 Log Apply Services 0 138 16037 MRP0: Background Media Recovery cancelled with status 16037
05-SEP-12 Log Apply Services 0 139 0 MRP0: Background Media Recovery process shutdown
05-SEP-12 Log Apply Services 0 140 0 Managed Standby Recovery Canceled
05-SEP-12 Remote File Server 0 141 0 RFS[36]: Assigned to RFS process 3047
05-SEP-12 Log Apply Services 0 142 0 Attempt to start background Managed Standby Recovery process
05-SEP-12 Log Apply Services 0 143 0 MRP0: Background Managed Standby Recovery process started
05-SEP-12 Log Apply Services 0 144 0 Managed Standby Recovery starting Real Time Apply
05-SEP-12 Log Apply Services 0 145 0 Media Recovery Waiting for thread 1 sequence 37638 (in transit)
05-SEP-12 Network Services 0 146 0 RFS[35]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 147 0 RFS[37]: Assigned to RFS process 3061
05-SEP-12 Network Services 0 148 0 RFS[36]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 149 0 RFS[38]: Assigned to RFS process 3063
05-SEP-12 Remote File Server 0 150 0 RFS[39]: Assigned to RFS process 3065
05-SEP-12 Network Services 0 151 0 RFS[25]: Possible network disconnect with primary database
05-SEP-12 Network Services 0 152 0 RFS[21]: Possible network disconnect with primary database
05-SEP-12 Remote File Server 0 153 0 Archivelog record exists, but no file is found
05-SEP-12 Remote File Server 0 154 0 RFS[40]: Assigned to RFS process 3067
05-SEP-12 Network Services 0 155 0 RFS[37]: Possible network disconnect with primary database

TF400893: Team Foundation Server services are not available.

Hi Gang
Am getting
TF400893: Team Foundation Server services are not available. This is most likely caused by a network error. Please check your connection and try again.
consistently when trying to access TFS2012 Web Access. I'm on the same domain as the server and able to login however as soon as I try and access a query it asks me to log in again and then presents me with the above message.
Any thoughts am trying to get as many ports open as possible however security's pretty tight here.
Regards

Hi,
Thanks for your feedback!
I recommend you install TFS Power Tools and run a Team Foundation Server Complete Health Check and see if it helps.
TFS 2012 Power Tools download address:http://visualstudiogallery.msdn.microsoft.com/b1ef7eb2-e084-4cb8-9bc7-06c3bad9148f
Hope it helps!
Best Regards,
Cathy Kong
MSDN Community Support | Feedback to us
Develop and promote your apps in Windows Store
Please remember to mark the replies as answers if they help and unmark them if they provide no help.

SRM 7.0, PO details are not getting populated in Contract History Tab

Hello Folks,
I am stuck with an issue and would need your help regarding that.
Scenario: (Extended Classic Scenario) SRM version 7
A catagory Contract is created.
Shopping cart created with Contract as the source of supply.
Once the SC is approved PO is generated.
Now if we open the contract and view the History tab, under Tracking PO details should appear.
However we are not getting any details of the PO in the Contract. Could you please suggest where to look, to resolve this issue.
Your inputs will be highly appreciated.
Regards
Nishant Rajvanshi

RZ20 errors:
Local Errors: Business to Business Procurement(600)
Error reading export data for EXEC transfer of purchase order
Error in local purchase order; no update of references in EXEC system
Backend Errors:
PO 3000000051: No instance of object type PurchaseOrder has been created. External reference:
Purchase order 3000000051: Document contains no items
Purchase order 3000000051: Transfer Failed; Resubmit
Since we are in SRM 7.0 ECC 6.04 Ehp 4, with PI 7.11 + ROS and no SUS.
doent the system uses ESOA Service for PO replication.
We did CCTR / CPPR scenarios too. Both are sucessful.
Do we need to impl BADI PUR_SE_PO_INTERFACE_OUT_SELECT
But thats for Service hierarchy and Service POs - We dont have Service hierarchy or SUS in our SLD.
IF PO replication also uses PI, what configuration do i need to do?

Lync monitoring Details reports are not getting opened, Getting SQL error like "Cannot impersonate user for data source 'CDRDB"

Hi,
Two month before, We have deployed Lync 13 set up with lync monitoring and archiving service enabled. After configuring we have the Lync monitoring and archiving services are working fine... few weeks back I have changed the Admin Password
of the Lync Setup. After that Lync Monitoring and Archiving services are not working.
when I try open Lync monitoring service from web UI,
http://localhost/ReportServer_LyncMonitoring/
Web UI is opening but Reports home page is not Accessible , Getting error Like
"An error has occurred during report processing. (rsProcessingAborted)
Cannot impersonate user for data source 'CDRDB'. (rsErrorImpersonatingUser)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
The user name or password is incorrect"
Please help me to trouble shoot this problem.
Thanks,
Rajarajan.D

Hi Rajarajan.D
You probably need to update the password against the CDRDB datasource in SSRS Report manager, take a look at this article: http://lyncme.co.uk/microsoft-lync-server-2013/cannot-impersonate-user-for-data-source-cdrdb-rserrorimpersonatinguser-error/
If this helped you please click "Vote As Helpful" if it answered your question please click "Mark As Answer"
Georg Thomas | Lync MVP
Blog www.lynced.com.au | Twitter
@georgathomas
Lync Edge Port Check (Beta)
This forum post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

HR iViews are not getting displayed and showing "Page can not be found".

Hello,
I am facing an issue in the EP 7 wherein all the standard HR iViews are not getting displayed and showing "Page can not be found".
We have added S_SERVICE autorisation object to user used for the relative JCO as well by looking at other similar forums but that did not help.
I have attached last part of log from file application.log under "F:\usr\sap\EP1\JC01\j2ee\cluster\server0\log"
#0002A537D2A6006A0000027300001C4C00046E3590936E5F#1247076244733#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12374##n/a##b7291b106be911de8d8a0002a537d2a6#SAPEngine_Application_Thread[impl:3]_27##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A6007A0000001200001C4C00046E35AAA74D33#1247076682222#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A6005F0000026C00001C4C00046E35C2814813#1247077082383#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#SKhatkale#12460##n/a##a7cb51e06beb11de8bd70002a537d2a6#SAPEngine_Application_Thread[impl:3]_6##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
#1.5 #0002A537D2A60075000002BD00001C4C00046E35C3AD4359#1247077102039#/Applications/Xss#sap.com/tcwddispwda#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#SKhatkale#12464##rrisep1p01_EP1_14481150#SKhatkale#b6d348006beb11deb9780002a537d2a6#SAPEngine_Application_Thread[impl:3]_31##0#0#Fatal#1#com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent#Plain###You do not have the authorization to start service sap.com/pcui_gp~xssutils/XssMenu.#
#1.5 #0002A537D2A6007A0000001300001C4C00046E35DDE07029#1247077541575#/Applications/WebApplications##com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Guest#0##n/a##cf997d306af811dec69d0002a537d2a6#Thread[Finalizer,8,system]##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: destroy#
#1.5 #0002A537D2A600650000024600001C4C00046E36B6DBE4D0#1247081181950#/Applications/WebApplications#sap.com/irj#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Administrator#12873##n/a##37e186606bf511de8bf20002a537d2a6#SAPEngine_Application_Thread[impl:3]_0##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.runtime.context.ServletContextImpl#Plain###application [irj] prt: init#
Please let me know if anybody has come across such scenario before.
Thanks
Suhas
Edited by: Suhas Khatkale on Jul 8, 2009 10:09 PM

Hi,
This issue is now resolved. We followed up with SAP and they suggested to update the component EP-PSERV to latest patch which was earlier to patch 1. Later on we upgraded it to patch 4 and this resolved the issue.
Thanks
Suhas

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I updated to OS X Mavericks and now trying to run Logic Pro X on a MacBook Pro mid-2009, using an M-Audio Axiom 49 and an M-Audio Fast Track Pro... Logic keeps telling me that Mac OS X MIDI Services are not available... How do I solve this problem?

I just checked to see if the update to OS X Yosemite 10.10.1 solved any of the issues outlined in my previous post, and to my dismay, nothing has changed -- all of the previous problems persist.
My iMac (8) -- it's renamed itself eight times since the recent troubleshoot with the Apple tech rep -- shows up as a shared device in Finder on my MacBook Pro, but when I click on it, I cannot establish a connection using "Connect As". So I've attempted to connect using the menu "Go/Connect to Server...", using both (alternately) the iMac's name and IP address, to no avail. I get a message which reads: "There was a problem connecting to the server 'Peter's iMac (8)'. This server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again."
Here's what I know:
The server -- Peter's iMac (8) does exist;
The server -- Peter's iMac (8) is available at this time;
The server name -- Peter's iMac (8) -- is correct, as specified in the system sharing preferences;
The server IP address is correct, as specified in the system sharing preferences;
The network connection is active when I attempt to connect.
I'm convinced the problems stem directly from the OS X Yosemite update. None of this was ever remotely an issue in the previous OS X's -- any of them. This is maddening! What can be done? Apple?? Anyone???

Recordings are not getting Purged in MediaSense

Dear All,
I hope you all are in good health, the call records are not getting purged we have set the purging state at 2 days, the Cisco MediaSense Media Service was restarted. Grateful to have a guidance in this regard, if there are anyother settings needed to be changed. The screenshot is attached.
Best Regards,
Durraze Khan

Hi Durraze,
The prune policy is AND and not OR. So based on the screenshot when the recordings are 2 days old and there is no disk space, then auto pruning starts.
Hope this helps!
Regards,
Arundeep

Changes to Excel files are not getting updated

File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected. File updates not reflected. I modified content, added data validation and saved the file back - next day file is still the way it was before modification.
Other file, another site but similar situation.
Content changed - form added but next day the change is not reflected.

Hi,
According to your post, my understanding is that changes to Excel files are not getting updated.
I recommend to configure Excel Services data refresh by using Secure Store and an external Office Data Connection (ODC) file.
For more information, you can refe to:
Configure Excel Services data refresh by using external data connections in SharePoint Server 2013
If you use PowerPivot, you can refer to:
Refreshing PowerPivot Data in SharePoint 2013
If you use Office Web Apps, you can use New-SPWOPISuppressionSetting -extension xlsx -action view to refresh data.
You can refer to:
PowerPivot for SharePoint - Browser Refresh Fails (Data Refresh not supported in Office Web Apps)
In addition, here is a similar thread for your reference:
http://social.technet.microsoft.com/Forums/office/en-US/2c4009f3-62bc-4af0-9e16-e40e9d418e3b/user-changes-to-sharepoint-documents-lost
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Sql services are not able to start in server

We have rebooted inactive the server due to rolling maintenance.
Sql is not running and sql services are not able to start. Getting the below error message while starting the services.
please suggest how to fix?

Could you try:
To resolve the problem, use these steps:
Change the startup account of both the MSSQLSERVER and SQLServerAgent to use the Local System account.
Restart the computer.
https://support.microsoft.com/en-us/kb/307288
Or check NetLogon service is running

Rules are not getting fired - urgent

Hello
I am a newbie to the oracle rules engine (10.1.3) and introducing the rules engine in our architecture.
I have started to fire a simple rule but looks like the rules are not getting fired.
Here is my code snipped: I am setting a value in the fact if another value is null.
==========
RuleDictionary rDict = RuleFactory.getRuleDictionary(RadiusConstants.RADIUS_REPOSITORY, RadiusConstants.RADIUS_DICTIONARY, RadiusConstants.DICTIONARY_VERSION);
RuleSession ruleSession = new RuleSession();
ruleSession.executeRuleset(rDict.dataModelRL());
ruleSession.executeRuleset(rDict.ruleSetRL(taskName));
RuleMessage ruleMessage = new RuleMessage();
ruleSession.callFunctionWithArgument("assert", moduleVo);
ruleSession.callFunction("run");
ruleSession.callFunctionWithArgument("assert", moduleVo);
// ruleSession.callFunctionWithArgument("assert", moduleVo);
System.out.println(" Module Status " + moduleVo.getStatus());
========
Any help is greatly appreciated. I am not sure if I am missing. I am suing rule author to create the rules.
I am asserting the fact in the rules engine. Here is the RL file generated from the rule author.
==================
ruleset MODULE_CREATE
2.
3. {
4.
5. rule ModuleId_Null
6. {
7. priority = 0;
8. if
9. (
10. (
11. fact gov.sec.radius.admin.service.module.vo.ModuleVO v0_ModuleVO && (
12. (v0_ModuleVO.moduleId == null)))
13. )
14.
15. {
16. v0_ModuleVO.status = "P";
17. assert(v0_ModuleVO);
18. }
19. } //end rule ModuleId_Null;
20. }// end ruleset MODULE_CREATE
=================
thanks very much in advance
Yugandhar

You need to specify the ruleset or rulesets that should be run. If there is only one, you can do:
ruleSesion.callFunctionWithArgument("run", taskName);
or
ruleSesion.callFunctionWithArgument("pushRuleset", taskName);
ruleSession.callFunction("run");
If there are multiple rulesets you want to run in order, then call pushRuleset in stack-order that you want their actions executed.

Nohup.log files are not getting generated correctly

hai,
im a weblogic administrator. Here is my problem in weblogic. My partner has complained that nohup.logs are not getting generated properly. Like for every 5 mins a new nohup .log file is getting generated. But almost 4 to 5 logs are of 0 size and after that the 6 log file is very hug ( around MB). And the status of the managed servers is in FAILED state. When i checked the nohup logs, i can see "E297: Write Error In Swap File" and also the below error. But when i checked the disk space it is only 30 % full. Please suggest me something that can help me in this. Why is this behavior in the nohup.logs? have anyone faced anythign like this? Please help me.
But after the recycle everything is fine. But i want to know what went wrong and why it got recovered after the recycle.
<Feb 11, 2010 7:43:59 AM CST> <Error> <HTTP> <BEA-101246> <Error occurred while flushing HTTP log file for the Web server: wl38_managed1
java.io.IOException: Disk quota exceeded.
java.io.IOException: Disk quota exceeded
at java.io.FileOutputStream.writeBytes([BII)V(FileOutputStream.java:???)
at java.io.FileOutputStream.write(FileOutputStream.java:260)
at com.wily.introscope.agent.probe.io.ManagedFileOutputStream.write(ManagedFileOutputStream.java:423)
at weblogic.utils.io.DoubleBufferedOutputStream.flushBuffer(DoubleBufferedOutputStream.java:58)
at weblogic.utils.io.DoubleBufferedOutputStream.flush(DoubleBufferedOutputStream.java:157)
at weblogic.servlet.logging.LogManagerHttp$FlushLogStreamTrigger.trigger(LogManagerHttp.java:522)
at weblogic.time.common.internal.ScheduledTrigger.run(ScheduledTrigger.java:243)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:118)
at weblogic.time.common.internal.ScheduledTrigger.executeLocally(ScheduledTrigger.java:229)
at weblogic.time.common.internal.ScheduledTrigger.execute(ScheduledTrigger.java:223)
at weblogic.time.server.ScheduledTrigger.execute(ScheduledTrigger.java:50)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:219)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:178)

according to error message, your partition size have not enough disk space from where you are running nohup command. check with df -kh.

Problem in X3, video from you tube are not getting...

Guys, I have activated gprs. videos are not getting played in you tube. Do i need to do any settings? Any pointers wil help. Thank you.
Solved!
Go to Solution.

You require 3G for video streams to play.. Normal GPRS (2G) will not work..
Even if your Service Provider activates this facility your phone should be compatible too.Nokia X3 can handle EDGE so if you want to go for the Data Plan with Higer rate (cost) first confirm if Video stream will work or not.. because with EDGE also the stream may not be as smmoth as you want...
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

DRM services are not getting up..

Similar Messages

Maybe you are looking for