Drobo 800 fs is no longer recognised following upgrade to 10.7.2

Using an Inter I-Mac Mid 2011 and 10.7.1. Drobo 800 fs connected no issue. When I upgraded to 10.7.2 it continued to work. I needed to power down so did and when I switched back on the Drobo 800 fs was no longer recognised by Drobo Dashboard. I have rebooted everytjhing. No firewall is in place and I am using the latest driver for the Drobo & Drobo Dashboard both up to date. Any thoughts on how to resolve. Thanks for your help in advance. Pete

I had the same problem. After the latest update of Lion the Drobo Dashboard does not recognize my Drobo.
The solution: in Finder I eject Drobo then I switched Drobo off. As all light went off I switched it on again.
As Drobo showed in Finder again, I started Drobo Dashboard and everything is OK again.
My Drobo is Drobo Pro FS.

Similar Messages

Canon XM2 no longer recognised since upgrade to Leopard

Can someone please help me understand why my Canon XM2 (PAL GL2), which worked perfectly under 10.4), is no longer being recognised in Leopard??? I've got an urgent job to complete this weekend and couldn't even get the footage off my camera last evening!
Help most gratefully received!

I tried uninstalling and upgrading to quicktime 7.3 last night again. I've tried both Firewire PAL DV and Basic. When I fire up FCP it says the camera is not detected (even though it's on and connected and viewable in the system profiler). If I click "Check Again" it clears the dialogue and goes through.
If I then click "Log and Capture" I get the Capture window pane come up but it says "Preview Disabled". In the status it says [VTR OK] for about 15 seconds before changing to [No Communication]. If during that 15 seconds I press Play in the capture window it DOES start the camera (but nothing is displayed). If I press Stop, it only pauses it (doesn't actually perform a Stop). Then it goes to [No Communication] and there's nothing else I can do.
I just want to reiterate that this was working perfectly in Tiger before I upgraded. I can't say it's definitely Leopard which has induced the problem but it's looking very likely.
Thanks again everyone for all your suggestions. I am trying everything you throw at me

My itunes no longer recognises my ipod nano and won't sync. Any advice?

My ipod nano is no longer recognised by itunes and won't sync. Itunes is on a Window 8 computer and while windows sees the device, itunes won't? Any advice?

Hi caro101,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod nano not being recognized in iTunes.
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
If you see your iPod in My Computer (Windows XP) or Computer (Windows Vista, Windows 7, or Windows 8) but not in iTunes under Devices, try these steps. Start at the top and work your way through the steps until iTunes recognizes your iPod.
If you don't see your iPod in My Computer, follow these steps.
This document is for Windows users and most older iPod models. See the following articles if you have this issue on:
A Mac
An iOS device (iPhone, iPad, or iPod touch)
An iPod nano (5th or 6th generation) (and you see an alert message in iTunes when you connect the device)
Cheers,
- Judy

Zen Xtra no longer recognised by sys

Player: Zen Xtra (30GB)
firmware version: .20.08
I installed the software for my zen from the cd, then I upgraded my software from the CD versions to the following versions, and my player is no longer recognised.
These are the files I installed:
Media Source - CMS_PCAPP_LB_3_30_2.exe
Jukebox driver - JB3MV2_PCWDRV_US__30_03.EXE
Zen Plugin - CMS_PJB3_PCApp_LB_2_00_9.exe
I've connected the same player to other computers and have no problems, and my USB ports all work fine with my USB keyboard and mouse.
The only thing I can think of is that i've run windows update (this is a new PC), and might that have installed some conflicting files/drivers?
Any ideas?

Chet wrote:
I'd plugged in the USB cable to my Zen Xtra before plugging it into the PC. I heard a crackling noise after which the PC would not recognised the Zen. Got a message about unknown USB device.
Plugged a thumbdri've in after that, and got the same message so I thought the USB ports were ruined or something. But after a while, the thumbdri've is ok, but PC still would not recognise my Zen.
The Zen also freezes when the USB cable is plugged in. I had to do a soft reset by poking a straightened paper clip into the reset hole.
What do I do now?
Does the Zen Xtra work fine when NOT connected to the PC?
Also, if you have another USB cable, you might want to try it.

I have a new hard drive and itunes and my computer (windows XP) no longer recognise my ipod. I also had the problem with the registry keys not being present but this has now been fixed. However i can no longer link my ipod up with itunes.

When I first tried itunes with my new hard drive there was the problem with the registry keys but something also flagged up about needing a signed driver. Is this anything to do with why Itunes and my computer no longer recognises when my ipod is linked up? Whatever i try under 'devices' my ipod is never available to sync up. If anyone can help I would be most grateful.

Thanks for your reply. Unfortunately this has not worked. I didn't have quicktime to begin with so I don't know if that makes a difference? After following the instructions, I get the "registry keys missing" problem appear again (which I've subsequently fixed again) and then when I connected the ipod I got the following message - 'Device driver software was not successfully installed'.
I've tried windows update but this doesn't do anything as '...the service is not running'.
Any suggestions?

HP Envy 120 All in One Printer no longer recognises MacBook Air

Since upgrading to Yosemite, my HP Envy 120 no longer recognises my Macbook Air and vice versa via the router, having worked previously (not perfectly all the time admittedly but connection wasn't an issue). I can connect Macbook to printer via HP direct, but this means disconnecting from the internet, scanning, then re-connecting to internet which is a bit of a faff and seems a backwards move.
I have downloaded the latest HP printer driver software, followed all suggestions I can find on this such as deleting the printer on the Macbook under system preferences, but when I try to add it back on, nothing shows. I've tried adding the IP address manually, this comes up with an error message. I've done the wireless wizard on the printer and that was successful so it is connected to the router but is not detecting my computer, which is also connected to the same router.
The printer is still under warranty - I meant to take it back when I had earlier problems but decided to stick with it a bit longer. I'm just trying to work out - is it a HP problem or is it an Apple problem - ie can I return the printer under the warranty?
Or does anyone have any simple fixes? I'm not at all computer literate!
Many thanks!
This question was solved.
View Solution.

Hi,
As you mention that you do able to use the printer with no issues by using HP Wireless Direct, that means that this is neither HP or Apple issue but a network connectivity issue.
Apple devices uses Bonjour to communicate with the printer, that relies on IP Muticasting which need to be supported by your router.
If I clearly understood your description and the device do work as expected using HP Wireless Direct, the router is the cause for this issue as you do not see similar issues while removing the oruter from that acquisition... please also let me know if i have misunderstood your intention about the issue.
Additionally, have you tried rebooting your router by unplugging its power for 10-20 seconds? once it starts up reboot both the printer and then Mac and check for any difference..
Please try that and check if that help. if the issue persists do let me know your router brand and model, its settings or capabilities may cause a such and may prevet this kind of connectivity.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Updated iTunes to latest version (10.4.1.10) resulted in computer no longer recognising my iPhone 4. Uninstalled and then reinstalled iTunes, still my iPhone is not detected by iTunes.

Updated iTunes to latest version (10.4.1.10) resulted in computer no longer recognising my iPhone 4. Uninstalled and then reinstalled iTunes, still my iPhone is not detected by iTunes.
Please can anyone help…..

c) unistalled and reinstalled iTunes
Doublechecking. Have you also tried a complete uninstall of both iTunes and all the other related software components and then a reinstall? If not, try the instructions from the following document:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8

I found my old iPod shuffle and thought I would sync my iTunes library onto it, now my laptop no longer recognises my ipad! Very frustrating!

I found my old iPod shuffle (3rd gen) and thought I would sync my iTunes library onto it, iTunes wouldn't recognise it at first so following forums on here I managed to find some apple software to reset and update the shuffle! This worked and the iPod shuffle was then recognised by iTunes but now my laptop no longer recognises my ipad! Very frustrating!
Please can some one help! I've been searching on here for a few days now and have tried numerous suggestions from other people's questions but nothing has worked yet!

You can try this:
I am assuming you are running Windows:
Plug in your iPad to the PC.
Now go to "Start"   - "devices and printers"
Is your iPad showing there ?   (you may have to scroll down)
If you can see it - right click the iPad icon and select "Troubleshoot"
If the USB driver is missing/incorrect it will tell you.
You can also look here                      http://support.apple.com/kb/TS1538

7.6 upgrade Ipod no longer recognised

I upgraded itunes to 7.6 this morning and now my Ipod is no longer recognised when I connect it. I have plugged it into another pc with an earlier version of itunes and have no problems.
Anyone else having this problem? Is there a way to fix it - without losing my library?

I have the same problem as y'all, my iTunes registers that an iPod is connected but tells me it's corrupted and won't sync. I know it ain't the iPod because I have two of them and they can't BOTH be corrupted. Also, I did restore one and it STILL didn't work. The problem is definitely 7.6. I followed the advice and uninstalled and reinstalled everything. I discovered that no, uninstalling iTunes doesn't uninstall your library (but I'd save it elsewhere, just in case.) However, uninstalling and reinstalling those files did not work to make the system recognize the iPod.
APPLE, ARE YOU LISTENING?????

TS1567 Update - i-phone no longer recognised!

Hi,
I have just updated i-tunes as requested, however my i-phone 5S is now no longer recognised by i-tunes
Has anyone else had this problem?
John

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

USB device no longer recognised

I have a GoPro which was working fine on the Apple, I connected it to my sons Windows computer to edit some video, now when I plug it in to the apple it is not showing anywhere! Likewise the external hard drive I used on his computer to transfer the files is no longer recognised on the Apple.
I must be missing something? They are still there showing on the Windows computer.

Hello John79378,
Thanks for using Apple Support Communities.
To start troubleshooting this issue where your USB devices are not being recognized by your Mac, I'd like you to please follow the article linked to below.
USB and FireWire Quick Assist - Apple Support
Cheers,
Alex H.

HT201071 Mavericks no longer recognises my Nikon D80. Can't mount in Finder or iPhoto. How do I fix this?

Mavericks no longer recognises my Nikon D80. Can't mount in Finder or iPhoto. How do I fix this?

The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
As for the Scan button not working, the following is documented by HP
Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

Following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions?

following upgrade to osx 10.8.2 on my mac mini I can no longer connect to icloud, I wouldn't mind so much but I have come to rely on th eicloud services to manage my work and home services, has any1 else experienced this and has any1 any solutions as this is messed up all of my work relations?

Had the same problem this morning after updating to 10.8.2. Mail was finding my dot-mac account as always, but System Preferences popped up and said my iCloud password was incorrect. Did the "forgot password" reset, but still had the same problem. Then I went to icloud.com in Safari, logged in with the new password, it worked no problem. So I went back to the icloud preference pane, signed out of icloud, answered yes to all the warnings about data being deleted from my mac, blah blah blah, then re-signed in to icloud. Everything worked. I did have to set up my icloud account in Mail again, which now lists the account mailbox as "iCloud", and not "mac.com" as it did before. But so far, everything is working (fingers crossed.)

Why is my Ipod Touch no longer recognised by my computer. I have Vista

Why is my Ipod touch no longer recognised by my computer? please.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears.

IPod no longer recognised

Hoping someone can help me as I can't find any relevant information...
My flatmate recently got a 5th generation iPod which she has registered on my Toshiba laptop. Since this has happened iTunes and the laptop no longer recognises my poor old 2nd gen! It will still charge but that's it.
Any way to fix it?? I've tried to restart both devices, the latest version of itunes is installed, not sure what else to do.

Hello Amy1607,
And welcome to Apple Discussions!
I would start with this Apple support document and we'll go from there. Make sure to try each and every troubleshooting solution as needed.
http://support.apple.com/kb/ts1369?viewlocale=en_us
B-rock

Drobo 800 fs is no longer recognised following upgrade to 10.7.2

Similar Messages

Maybe you are looking for