Drobo FS, Airport Extreme, and iTunes way too slow

I have a Drobo FS, that contains my >600gb iTunes library, plugged in to my Airport Extreme. I access the Airport wirelesly via a MBP and was hoping to play back music and video wirelessly and to sync my iPhone. Unfortunately, iTunes is lagging terribly and I can not sync music to my phone. I had a 3tb My Book attached via usb to the Airport previously without problem. Is anyone else trying this or could offer help? It would be much appreciated. Thanks.

"What you can do is watch your process list to see if other processes are causing itunes to slow down. Also if you have a bunch of processes running that don't need to be then close them down to see if the performance increases." no other processes are taking any noticeable CPU time, and none over 10%, EXCEPT iTunes. Just scrolling in my library causes the CPU to max out at 100%. Try it yourself. Put a CPU indicator in your system tray. Also, downloading podcasts pegs the CPU really high. Also, iTunes misses keystrokes (probably because it hogs all the CPU), and it is slow to respond to mouse clicks. Very annoying! Just lame programming - that's all. No conflicts on my system, no other problem programs running on my system. Just one badly written application called iTunes.

Similar Messages

HT4260 I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?

I have an AirPort Extreme and a linksys router. What is the best way to get 6-8 wired connections with ac speeds?
Appreciate your assistance.

The answer depends on whether the AirPort Extreme is your main router....or...the Linksys device is your main router.
In either case, the two devices must connect together using a wired Ethernet connection using CAT5e or CAT6 cabling.
Any version of the AirPort Extreme produced within the last 5 years will have Gigabit Ethernet ports. In order to get the same speeds from the Linksys router, it will also need to be Gigabit Ethernet capable.
If you need additional Ethernet ports, you will need to add a Gigabit Ethernet switch to either the AirPort Extreme or Linksys router.
It is assumed that your other devices connecting to the AirPort Extreme and Linksys router will also have Gigabit Ethernet capability.
Not sure why you mention "ac" speeds in your post. This relates to wireless connections, not wired.

Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

Recently we changed our Lynksys router to an Airport Extreme and now my MacBook Pro running 10.6.8 will not stream radio through Itunes without constantly rebuffering. Any ideas?

I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I updgraded to Safari 5.1 and the problem is now worse. Any solutions?

I allowed Apple updates about two weeks ago and now Safari is way too slow. I have tried using Airport and Ethernet and the problem is the same. Yesterday, I upgraded to Safari 5.1 and now the problem is worse. Any solutions?

I can't stand peremptory affirmations like "Nothing is wrong with Safari".
Thousands of users can't be wrong (see the discussions).
If I read you the right way, it's never software' fault, it's the user who's the culprit.
Amazing!
In this very case, the fact is we can't give to "christinefromfonthill" a good solution because weren't sitting in front of her Mac.
You give her a good advice which could, perhaps, lead to an improvement.
But must also admit that Safari is a very slow browser compared to Firefox or Chrome.
And you can't ignore all the problems which arose when upgrading to Lion and were related to the new build and specs of Safari 5.1.
The best example is the apparition of "garbage type" (use of Last Resort font) when reading numerous sites. This never occured before and is the direct consequence of Safari compliance to Web Open Type. This standard prohibits the use of Type 1 Postscript Fonts and is the reason why so many people are in trouble.
I use a Mac for more than 25 years.
I am a very "clean" user who hates the bells and whistles of third party.
My Mac is always up-to-date and despite all my Mac loving care, I run into some problems.
Imagine the nightmare which can occurs for the vulgum pecus who isn't, by definition, a power user aware of all the requirements for running a System in optimal conditions.
May be Safari is one step in advance on its time but lambda users are paying the price for it.

Time Machine, Hard Drive, AirPort Extreme, and possible damage?

I plugged in an external HD to my AirPort Extreme (gigabit) base station today and started a Time Machine backup to it. After about 8 hours, I had transferred only 12 gigs of my 46 and ended up stopping it. I realize only the initial backup should take forever, but I am afraid that running the MacBook Pro hard drive constantly for hours could damage it. Are the portable hard drives capable of running for hours on end? What's the risk of damaging it?
I didn't notice any major heat issues with the Penryn MacBook Pro while doing this, but I didn't want the hard drive to break either. Plus, the wireless backup just takes way too long. I can't run an N only network because I have older AirPort expresses (WDS), older G clients in the house, and some iPhones that need to get online. I understand that 802.11g is slower than N, but it's way too slow for wireless backups.

Connecting a USB HDD to an Extreme can be used for Time Machine backups, but it is not officially supported by Apple. You will have to start a new TM backup if you are using the Extreme as TM backups to a NAS (vs. local disks) will backup as a sparsebundle (vs. your current folder format). The same goes for backup to a Time Capsule.

Some basic question of Airport Extreme and Airport Express

As I know, my G4PB is installed Airport Extreme and it seems like working wireless Internet connection during travel. But which case do I need additional things like Airport Express (if I undestand this wireless technology correctly)?

blue sky,If all really depends on what you are trying to achieve.
If you wish to surf the Internet when you're out and about then you can just walk in to Starbucks, for example, and log-in - you already have all that is required.
If you want to use the Internet wirelessly at home then the Apple Extreme Base Station, an Airport Express or much cheaper 3rd party gear can help (although some additional hardware may be required dependimg on how you connect to the Internet).
If you want to surf wirelessly, stream music from iTunes to your home Hi-Fi and use a USB printer wirelessly then the Airport Express is the puppy.
If you need to share an Internet connection as well as a network with many wired and wireless users then the Airport Extreme Base Station could help.
Try reading the Airport Page to consolidate your ideas of what you want to achieve, or use this home networking wizard.
Either way you should be aware that you don't have a Powerbook Titanium (On a Ti the ports are tidy on the back under a neat cover and it has a slim 1" thin design) but rather you have a PB Aluminium (ports scattered on either side and it's approx 1.25" thick!)
mrtotes

Airport extreme and express & apple TV

I have an airport extreme and express & apple TV. I'd like to do the following:
1) Extend the network via the express
2) Enable the express to stream music to the stereo from the apple TV
I am sure someone has figured this out but I can't find the answer...
Thank you

Firstly, the easiest bit (although I don't believe you need to do this):
I would try "downgrading" the Extreme station's network type to only b/g (excluding n entirely), but I don't see that option in the radio settings anymore
You will get additional settings if you hold down the option key while browsing the radio settings drop down menu.
Moving on: Unfortunately a dropped connections seems to be a problem with umpteen causes and not only is it difficult to troubleshoot with someone in a forum it can also be made even more difficult because many problems are associated with network settings on a router that the person who is trying to help is unfamiliar with.
However you seem to be convinced your problems arise when your express is running which may narrow things down a little if correct, if not it may actually lead us away from the answer to your issue.
Is it the kind of security I'm running? Should I try WEP or... none at all?
I use WPA and have no problems (password = 8 Characters)
Should I attach it a different way? Perhaps manually set it to "participate in a WDS network" or "extend a wireless network?
I have my expresses set to participate in a WDS network, but that's because I use them for other things other than itunes, I would have thought 'join a network' would be fine.
You could check that all your devices are using independent IP addresses and all are using the same subnet. You could also check that no two devices have the same mac address, I've been told a million times this can't happen, but I've seen it. You may be wise to check these things before and after your devices have been 'kicked off the network", you may even want to write them down to see if any are changing.

Difference between Airport Extreme and Airport Express

What is the difference between Airport Extreme and Airport Express? My son is home from college and would like to use his Macbook for an online class. So I need a wireless router and I would also like to be able to play our iTunes over multiple speaker locations with my home stereo. Which one of these could accomplish this. Thanks in advance.

If you can use just one device to both set up a WiFi network and connect to your stereo you have to use an Airport Express. If you have to use separate devices, for instance because your internet connection device and your stereo are not in the same location, you have to use an Express to stream to and you can use either an Express or an Extreme to set up the WiFi.
By the way you have to use an Express for each stereo you would like to connect.

I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

I have been using a Mac Mini with an external hard and Time Machine. I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme. I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme. I have been using the optical drive from the Mac mini to load programs into the Mac Book Air. I think I'm just getting confused in Finder. I am just not seeing the hard drive. I ended up plugging the hard drive back into the Mac Mini and that is work fine again. How do I setting the external hard drive up to the AirPort Extreme and use for both computers? Or at least to start with the Mac mini.

It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

New Airport Extreme and iPhone Issues

I've had the networking day from ****. I previously had a 3rd Gen Time Capsule at our restaurant, connected to a Cisco 26port gigabit POE switch and Comcast digital voice and internet. Over the past few days, employees have reported trouble accessing the the Wifi network. After several restarts and firmware upgrades (including the dreaded "firmware problem" to fine update), nothing worked. I changed channels, back to auto, back to specific channels, back to auto. Made open guest networks. Nothing worked consistently. My iPhone might connect and my friend's might not. Nor his laptop consistently. Our Axis network cameras might take a bit extra time to connect. All quite random and quite frustrating.
So I swap out an older Airport Extreme (4th gen I believe) using the same configuration as the TC (Time Capsule). It works fine, except for the last port not working as expected. No matter, I plug the mac mini into the Cisco switch and off we go. Nevertheless, I'm still told we are suffering random Wifi issues. So I buy a brand new AE (5th gen) today to replace that one. Should work like a charm I thought. Right....
Several hours later, I finally have the new AE working, but only after doing several hard resets/factory restores, the works. For some reason, the mac mini could not successfully update any of the connected AEs - whether connected directly into the same AE, or if the Mini was connected to the switch. Nothing worked. Every time I tried to update the AE, it would hang and force me to unplug and plug it back in. It would also never save setting changes. I finally resorted to a friend's macbook to be able to restore it successfully. And once that worked, the mini was able to update the AE flawlessly. Our Point of Sales (POS) machines connect fine, our cameras connect fine, wifi printer connects, and the mini connects, and everything has internet.
Except my iPhone 5. Of course. It gets a signal fine (full bars). It gets an IP address. But I can't surf the web. Or download email. Or iMessages. Anything. No internet access. I try hard restarts on my iphone. I try assigning IP addresses by MAC address. I try resetting the AE. I try renaming the WiFi name. Nothing. I can make a guest network that works (on a different IP table, btw - 172, not 192.) But other than that, no access. Grrrr.
So I have a "working" AE router where some devices successfully connect (through wifi and ethernet) and some dont' (wifi iPhone). My iPhone connects fine to my home TC. So shouldn't be anything to do with that. But I'm at a loss. I'm going to go back and restore everything and power cycle everything tonight or tomorrow night. I don't know if that will help, but it's worth a try. Lord knows it feels like I've tried everything else.
Anyone have any good ideas of where to start besides voodoo dolls and baseball bats?

I took mine back, because I was having these very same issues. We use contivity too. I was able to connect only to one of three of the servers we manage (in Europe). I couldn't connect to the servers in Asia or here in the USA.
Replaced the Airport Extreme with my trusty old d-link 624, and no issues connecting to any of the three hubs.
Otherwise, I liked the Airport Extreme, and I'll consider buying it again when and if they address this VPN issue. I work at home so its obviously a "deal breaker" for me.

How do I connect Airport Extreme and Time Capsule to my new iMac so that AE is used for network and TC only used for Time Machine backup?

I didn't realize that Time Capsule will only support the print function of a wireless multifunction printer. So I want to use Extreme for my network to have full use of my printer and use TC as the Time machine backup only. How to I make the connections?

Thanks for your response and this is getting complicated but I just purchased a new iMac as well as the Airport TC. I've had the Airport Extreme for a year or so. The Airport Extreme worked perfectly with my old iMac wirelessly and I had all functions of my printer with no problems. I was expecting the same with the TC. But the instruction that came with TC say to connect the printer to the TC via USB...which I did. And the print function worked perfectly but nothing else. In researching I discovered that when wired that way the TC only supports the print function...not scan or fax or anything else. I tried going wireless since my AE worked perfectly via wireless but I got no printer functions at all that way. But I'm wondering also if I tried that during a time I was having other issues...I had to delete and re-add my printer which solved some other problems. I may try that again...and see if I can get all print functions with just the TC connected
As far as connecting both your AirPort Extreme and Time Capsule on your network, we're not clear on exactly how you want to do this. Will the AirPort Extreme connect to your modem using an Ethernet cable and the Time Capsule connect to the AirPort Extreme using an Ethernet cable?.......or......do you want the Time Capsule to connect to the network using wireless?
Well... first of all I would like not to have to use the AE at all...I would prefer using just my TC for network, all print functions and Time Machine backup if that's possible. My printer will not accept Ethernet connections (Canon MX512).
After failing at getting this to work, I decided I would try to use my AE for net and print functions and just use my TC for Time Machine backup. I tried several different connection configurations with no success until finally I connected cable modem to my AE via Ethernet and went wireless with the AE and printer. but connected the AE to the TC via Ethernet and amazingly everything worked like a charm (for a while) and I was patting myself on the back for being so smart. But now I find that the connection only lasts for a short time. If I leave it for a while the TC goes invisible...or at least I see a message saying the Ethernet is unplugged...but it is not... and I lose internet connection even though I have a green light on my AE. So now I'm at a loss. I don't know why I keep losing network signal and why my system thinks the Ethernet is unplugged.
So... after all this...I figured I wasn't so smart after all and I must have things wired incorrectly.
So... it sounds like you are saying I should go back and try again to get my new TC to work as I want it to via wireless instead of connecting via USB...is that correct? Could you tell me exactly how I should wire my equipment from cable modem to AE and/or TC to achieve net capability, full functions of my printer and Time Machine backup...
Thanks...

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use?

I have an airport extreme and express, if I use the extreme as a base station connected to my old router can I use the express to extend the signal while also creating a new network that only I can use? Essentially having two wifi connection off the same network? If so how do I set this up?

Extending using a wireless connection always results in a performance compromise.
If the Express is going to extend using a wireless connection, then the Express will need to be located about half way between the AirPort Extreme and the general area where you need more wireless coverage. The more that you have line-of-sight between the Extreme and Express, the better the network will operate.
Remember......the Express can only "extend" the quality and signal speed that it receives, so it needs to be located where it can get a very good signal from the Extreme. Although Apple cleverly uses the term "extend", a more accurate term for the Express would be "repeater".
If the Express will extend by connecting to the Extreme using a permanent, wired Ethernet cable connection......highly recommended for best performance.....then the Express can be located exactly where you need more wireless coverage. There is no signal loss at all through the Ethernet cable, so the Express gets a full speed signal no matter where it might be located.
Post back to let us know which way to you want to go.

How to setup a network with a time capsule, airport extreme and an airport express?

Hello.
First I want to make it clear all my knowledge off wireless networks is going on forums on the internet, before a couple of months ago I didn't realize wireless networking was so intricate so forgive my lack of experience.
I just bought a time capsule (today, 4th generation), I have an airport extreme bought in January 2011 (they just got refreshed so mine is now one generation old) and the same with my airport express (bought in January).
I originally bought the airport extreme and setup a wireless network using the dual band setup. I have no issues with the 5ghz network and most of my devices run on wireless n so I had no issues with them. my only two wireless devices that can not use the 5ghz network is my iPhone 4's which use wireless n but it has to use the 2.4ghz signal. Problem is in my apartment I am bombarded with other peoples 2.4ghz networks so my signal is terrible 10-15 feet from the airport extreme. Near my extreme I am getting signal ranges around 15mb to 20 mb. When Im about 15 minutes away in my bedroom (so one wall in between) my signal plummets to 1-2 mb. sometimes as low as 0.17mb which is not good. I got the airport express to extend my range and placed it in my bedroom. . After setting up the airport express the signal still was terrible. I researched and realized that if the signal strength ***** then the airport express cant boost the signal as much which makes sense in hind sight. I then researched setting up a roaming network or a WDS network. Per research a WDS network was not recommended b/c I was not using a wireless g network. I attempted to create a roaming network and then realized that you can not use an airport express in a roaming network. This has led me to now buy a time capsule.
First, in my setup do I or should I have the time capsule as the primary? I believe its more powerful than the airport extreme but Im not sure if that matters in a network that is distributing wifi from ethernet (thats how I am connected the extreme and the time capsule)
so can I do
cable modem ETHERNET Airport extreme(in the living room where its always been and works great in that immediate area) (3rd generation) ETHERNET Time Capsule(in the bedroom where I usually get poor signal) (4th gen) and then an airport express connecting to the 2.4ghz signal in the bedroom where the time capsule also is EXTENDING the wireless range?
or should it be the time capsule first bc its more powerful?
I tried setting up this setup and everything is green but I don't know if what I am doing is actually working on full cylinders b/c I am confused on some aspects. mainly on the airport extreme which is the primary device I have under the wireless tab selected create a wireless network and on the time capsule it also is on create a wireless network with the network name being exactly the same. Should it be changed to extend a wireless network? and then bridge mode? Should I have different channels for the different devices that are on 2.4ghz?
I am open to hear ANY suggestions, or ideas to improve my setup. PLEASE PLEASE HELP!!!!!!!, lol its been 5 long months of poor internet in my bedroom where my wife has her setup with a roku box and wifi tv (I have those hardwired for now) but mainly for her iPad and iPhone b/c its so bad sometimes she has to turn wifi off and use 3G. I have same issue in my bathroom, sometimes Im getting decent signal and sometimes its so bad I can't open the link on an RSS feed in safari which I have to assume doesn't require that much bandwith?
I have no wireless g devices. The only device I need 2.4ghz for is my iPhone 4's but they both use n also. All my other deivices connect on 5ghz and my 5ghz network is decent, a lot better than the 2.4ghz network atleast.

You wrote so much that I find it hard to address all your concerns. However, here are some thoughts:
1) I'd configure the Time Capsule as the "main" router, connected directly to your cable modem. Configure it to "create a wireless network" and to "Allow this network to be extended". Configure the other devices to "Extend a wireless network".
2) Put any device that's extending the network half way between the main router and the wireless clients. If the signal from the main router is weak at the cllient's location, then the extending device will also receive a weak signal.

Using an Airport Extreme and a Time Capsule at the same time

Guys I have had an Airport Extreme and a Time Capsule running together for nearly a year now and over the last few days the TC has been behaving badly. I changed its settings and now I'm in a mess. No, I can't remember the previous settings
Does anyone have a definitive list of the settings I need please? I have an ethernet cable modem, and the Airport Extreme is plugged into that as the main router. Two computers and the Time Capsule are plugged into the Airport Extreme using ethernet. The Time Capsule at the moment is just used as a network drive for Time Machine, but at some point I want to move it, with a long ethernet cable, and use it for extending the wifi in the house.
1. Should I connect the TC using its WAN port or one of the other ethernet ports? At present it's one of the other ones.
2. What TC settings should I use to have it function purely as a hard drive? At the moment there's some kind of conflict and my internet connection drops every 30 minutes.
3. Then later, what settings will I need to get the ethernet connected TC to extend the range of my wifi?
I read the Apple doc about WDS and tried setting the TC up that way. Then I discovered there is no WDS option in the AE Wireless settings. Only "Create a wireless network" or "extend a wireless network". The same setting on the TC has these options: "Create a wireless network" "Participate in a WDS network" or "extend a wireless network". Both devices have firmware 7.5.2. It didn't work with only the TC set for WDS, of course, but after that I can't get it back the way it was - which wasn't reliable anyway
Any help in exactly what the Wireless and Internet settings should be would be massively useful. Thanks!

If you use the extreme as a router then the tc should be connected via its wan port to one of the lan ports on the extreme. Tc should be set up in bridge mode. Basically you could set it up to create another wireless network beside the one created by the extreme. There is no need to use WDS or extend the other network.
Use the same SSID and password for both machines. Computers will connect to the strongest signal.

Airport Extreme and a Time Capsule - config recommendations?

Hi!
So I find myself (in a fortunate position?!) with a new Airport Extreme and a Time Capsule.
I have very few requirements - I would like to be able to connect to the Internet wirelessly, and I'd like to be able to backup a couple of Macs using Time Machine (also wirelessly). I realise that the TC can provide me with that functionality nice and easily, but since I have an AE and a TC, I figure it would be good to make use of both, and so I wanted to ask if anyone had any recommendations for a useful configuration?
I think there are 2 basic options I could make use of (have I missed any?!):
1) Use AE as base station and connect the TC to it as an external HD
2) Use AE as base station and also make TC available for back up wirelessly
Does anyone have any thoughts on the above? If you'd recommend 2), what would be your suggested approach as I think I'm right in saying that 2) could be done in several ways? Roaming? WDS? Just setup TC as a stand-alone wireless box with no internet connection? (does this latter approach mean I could connect to the internet and backup at the same time - I'm guessing not?)
If 1) is the way to go, is it just a case of putting an ethernet cable between the 2 boxes?
Any thoughts would be hugely appreciated!
Many thanks

I would use the Time Capsule as the wireless base station connected to the modem. Then I'd use the Airport Extreme to extend the network or to create a roaming network (ethernet cable betwee the units), whichever worked best in the premises. Naturally, Time Capsule would be used for backups of all machines equipped with Time Machine. Have never hooked up any Apple equipment but from my understanding of it, this is what I'd try.

Drobo FS, Airport Extreme, and iTunes way too slow

Similar Messages

Maybe you are looking for