Drobo NAS and Time Machine restore problems

My HDD crashed. I installed a new one. Reinstalled OSX Mavericks and tried a Migration Assistant from a DROBO 5N NAS (holding the Time Machine sparse.bundles). Profiles reinstalled, no data, no applications. Weird. I have tried Drobo, I have tried Apple consultant - recommended by Apple's support website. No success in getting the restore to take place with Apple software. Wondering if I can do this file by file. I really only care about the 1TB of movies, music, photos I have on iTunes and Aperture backups inside of the sparse.bundle files. Everything else I can reload. Please help. I have been down since July 15 on my home theater and photo library. Need to get this up and running ASAP. Everything looks OK on the backup file. When I try to simply copy the data files to my new HDD I get the dreaded OSX file copy error after about 200GB - which takes an incredibly long amount of time on my wireless home network (about 5 hours). Really need an expert to help out on this one. Please let me know if you can.
Thanks,
GJM120

Hi Bret,
You state it's running 10.5.8 but that it's only 9 months old; those two don't match up. If it is only 9 months old, bring it in to an Apple Store ("genius" bar appointment) and have them check it over. It sounds like it may be a HD issue to me.

Similar Messages

NAS and Time Machine

I am looking at getting some type of NAS. What NAS would i need so that time machines would be able to backup to it? I would be backing up a number of different computers both PC's/Servers and Mac's to it (from what i remember, once time machine uses it, you can't use it for anything else?). The mac's are running snow leopard if that matters.

Not really. It depends on what filesystems the NAS operating system supports as well as what transfer protocols are supported. Those products that specifically say they support AFP - Apple File Protocol - will work correctly with a Mac and many also will work with Time Machine. But if the product doesn't support AFP, then you will run into major issues due to differences in filesystems, and Time Machine will not recognize the NAS.
As for supporting multiple OSes you need to examine the specs for the device. It also may help to try downloading the user manual if the manufacturer puts it online.
There are a number of suitable products. Drobo, Synology, Buffalo, Apple, and others that support AFP and work with the Mac and TM. You might do some searching for product reviews at MacWorld.com, XLR8YourMac.com, BareFeats.com, TomsHardWareReview.com, and StorageReview.com as well as other sites you can find Googling.

Old FileVault crashed my MacBook Pro, had to delete, reinstall and Time Machine restore failed. Trying to manually rebuild. No iPhoto pics, no iTunes music and NO DOCUMENTS found! Any thoughts?

Here's the ordeal. I'm running a 2007 MacBook Pro 17 inch with Lion OS. When I converted to Lion, I didn't have enough room on my harddrive to convert to the new FileVault, so I remained on the old system. Less than a week ago I reboot my computer because iPhoto seems to be stuck on "cataloging" my photos, though after days of letting it run, it doesn't do anything. After the reboot, my computer appears as if it had been reset to factory settings with all my programs gone, etc. I'm like, hey, I've got Time Machine, I'll restore it. After the restore is run, when I go to login, I get the dreadful error message, "You are unable to log into the FileVault user "John" at this time. Logging into the account failed because an error occurred". I searched the internet via my iPhone for suggestions and followed everyone of them, all the way down to erasing my harddrive and reinstalling Lion. So I get back into my computer and think I'm golden. I go to restore my computer via Time Machine and wham....I'm right back to that error message. I think, ok, I'll do it again. This time it messes us even more, giving me two login screens, one for the new Lion like before I restored the computer and then a second, as if it were restored, but unable to login. On top of that, I couldn't get back to the Command-R page! I thought I was really screwed! Well, I finally figured a way back, or maybe it was just that it finally decided to cooperate, I don't know, but I erased my harddrive again, and reinstalled again and thought, well, I'll rebuild manually by selecting what I want to restore from the Time Machine drive. I was able to get all my applications back and running, but to my dismay, I seemingly have lost all my iTunes music (except that which Apple has graciously setup to redownload now "thank you!) plus all my iPhoto's and even worse, all my DOCUMENTS!!!! Here I thought Time Machine from backing all this stuff up, but with over a years worth of back-ups I cannot locate any photos, music, or my documents on my drive to extract! Needless to say, I will never be using Time Machine again to back up my computer, I'll find another program or at least do it all manually. But my question is: am I looking in the wrong places for this files? Are they hidden under some unknowning folder that doesn't list it as music, photos or files? I can manage with the music, I can live with the photos because my wife has many of them on her computer and I have many uploaded to Facebook, but my files! My documents, thousands of them, many with information I won't be able to compile again, seemingly gone unless someone out there has any ideas?!!!
I even had iPhoto search the drive for photos and after hours of the barber shop pole spinning I cancelled the command for I figured it wasn't going to find anything.
If anyone has any suggestions, or if Apple, you are reading this and can provide some direction, I would greatly appreciate it.

Also - my battery has been telling me "service battery" for a LONG time and then it switched to "replace soon" som time ago. Can't really see what this has to do with anything but whatever.
That could conceivably explain all the problems you're describing. Replacing a Mac's battery should not be postponed since a failed battery will cause other problems to occur. It is also possible that its hard disk has failed, which means the information on it may soon become unrecoverable.
... my latest TM back up was from April 2014, can I just run this when I have rescued everthing and then it might not be as slow?
If that Time Machine backup remains intact, it may be the only viable means of recovering that Mac's information. I suggest you do not attempt to restore its contents to your ailing Mac.
Given that you are having trouble creating a newer Time Machine backup you should stop using that Mac immediately and have it serviced as soon as you are able. Do not take it to anyone other than Apple or a service facility authorized by Apple, for the very reasons you explained. If there are no Apple Stores in your vicinity search for an Authorized Apple Service Provider using the Contact Us link below. Use one of the options that appear under Contact Apple Support. The language on that page will be different for your location.

Time Machine Restore problem

Hey all
I got a problem restoring from my time machine backups, what happened was, i reinstalled leopard thing the migration utility was the thing to use, so i went and reinstalled and did that but it wasn't what i wanted, so i looked it up and learnt it was restore i wanted.
So i went back, reformated my hard drive and clicked the restore choice from the drop down menu in the leopard boot dvd, it found the time machine hard drive, but when i click it, it doesn't find any backups, acts like there are none on there, but when i look in disk utility it still has all the used space from the backups.
So now i've reinstalled leopard and the harddrive is there and i can see the backups all sitting there, but when i go to restore it can't see them.
Does anyone know why? i really need to fix this because their are important files on the time machine and i needed my comp restored.
If anyone could help that'd be great!

I'm having a problem restoring an Address Book card. If I have Finder up when I go to Time Machine it looks and acts as I'd expect. If I Address Book is my active window when I go to Time Machine, for some reason the only active option for a backup is "Now". It doesn't allow me to go to any previous backup. When I search for the card that was recently deleted, it doesn't appear. That seems consistent with the fact that Now is the only copy that seems available in Time Machine, but any ideas why I don't have access to earlier versions?

40gb free space appeared after clean install of Mac OS X and time machine restore? What happened?

Recently, my computer had a display problem, and I brought it in to the Apple store to get it fixed. When they returned it, they had replaced not only the display but also the logic board, and the hard drive, and they did a clean install of the operating system. After OS X was clean installed onto my computer, I restored my files from Time Machine, but my hard drive now shows about 40 gigs more free space than I had before, when I originally brought my computer in. All my files seem to be in place. What am I missing? I was guessing that the cache of my web browsers have been cleared... But 40 Gigs seems like a lot of space to recover solely through clearing the web cache. Any ideas?

Hi, one question & one suggestion...
What possible things are connected at home but not at the store, inlude every cable, etc.
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Mavericks server time machine restore problem

i have a mac mini with mavericks server installed
i have backed up my imac to the mac mni server without any problems can enter time machine and install files but when trying to do a system restore
This is where my trouble arises, initially the window is populated with a username of "root" which is of course the user name I'm running under on the install disk, I change that to my user name or user nickname (have tried both) and enter my password for the osxbackup.local machine and I end up getting a dialog box with "There was a problem connecting to the server osxbackup.local" it goes on to say Check the server name and ip address and if problem continues contact my administrator. So I'm stuck here, I know my username and password are correct I've tried variations between my name and nick name but always get the same error. I get the same error if I use a 10.9.0 install disk as well. It seems that it is unable to contact the server based on the message but clearly the network is operating or we wouldn't have gotten this far. The only thing I see is in the error message it says "osxbackup.local." note the period after local. I assume that is a formatting thing and not an incorrect address and I know of no way to change this anyway. So what I thought would be a "simple matter" has like most things turned into an ordeal getting stuck on something that should be very simple. Hopefully someone can shed some light on this?

Do not rely on Time Machine to backup OSX Server. It does not work for restores and Apple says not to use it for server. Use Carbon Copy Cloner.
Also, you should Raid 1 mirror the server drives so if one drive fails you have the 2nd drive that keeps running and you just swap out the bad drive and redo the mirror. You also need to have another backup and disaster recovery plan in place in case both hard drives fail. This mean an external backup drive to run carbon copy cloner to. Also some sort of offsite backup is also needed.

Time Machine Restore problems

So recently my Mac's hard drive got messed up so I just reinstalled leopard with the installer disk since I've been using time machine to back up my files. So now i've been tryin to use one of the restore points from time mahine and its just stuck at the restore screen with the progress bar not even showing anything. Its been like this for more than an hour for sure so i'm not quite sure what the problem is. It's not showing a estimated time for restore so i'm thinking somethin is wrong. Does anyone know what the problem is?

The progress bar, often as not, is just kidding about what it shows. However, if you think your restore is truly stuck try to see if you can cancel it.
Did you use Disk Utility to verify and/or repair both your internal and your Time Machine disks before you started your restore? If not, you should do so.
Also, unless you have deliberately excluded your system from Time Machine backups it is not necessary to reinstall Leopard from the install DVD to do a full restore. Each Time Machine backup is a snapshot of your drive, including the system, so when you restore everything that was on your hard drive will be exactly like it was when that particular backup was made.

Time Machine Restore Problems: USB --- Firewire

I've got a MacBook running OS X 10.5.6, 2.2 GHz Intel Core 2 Duo, 2 GB 667 MHz DDR2 SDRAM, 112 GB internal HD, 300 GB External Firewire HD, and a Burly enclosure w/ two 750 GB SATAII Barracuda drives in a RAID I config hooked up via USB. I have Time Machine set to backup the internal drive and 300 GB external firewire drive to the Burly RAID.
I'm having trouble restoring files located on the external firewire drive with Time Machine - it returns the following error:
The Finder cannot complete the operation because some data in "File.ext" could not be read or written. (Error code -36)
I have successfully restored files to the internal hard drive, so this seems to be associated with restores to the firewire HD.

Continuing to trouble shoot this problem, I ran disk utility on both the Burly RAID and external firewire drives. The Burly RAID passed verification, but the external firewire drive didn't. The repair operation returned the following error:
First Aid Failed. Disk Utility stopped verifying "EcoCase300GB" because the following error was encountered: Filesystem verify or repair failed."
What next? The detailed output from Disk Utility is below.
Verifying volume “EcoCase300GB”
Checking Journaled HFS Plus volume.
Checking Extents Overflow file.
Checking Catalog file.
Incorrect block count for file ABC World News, 05.07.09.m4v
(It should be 3114 instead of 0)
Incorrect block count for file CNN=Politics Daily 2.m4v
(It should be 3118 instead of 0)
Incorrect size for file download.m4v
(It should be 659456 instead of 2973922)
Incorrect size for file download.mp4
(It should be 0 instead of 667265)
Checking multi-linked files.
Checking Catalog hierarchy.
Checking Extended Attributes file.
Overlapped extent allocation (file 6147034 /Music/iTunes Music/Podcasts/ABC World News (Enhanced Video)/ABC World News, 05.07.09.m4v)
Overlapped extent allocation (file 6147038 /Music/iTunes Music/Podcasts/CNN=Politics Daily (Video)/CNN=Politics Daily 2.m4v)
Overlapped extent allocation (file 6147874 /Music/iTunes Music/Podcasts/NBC Nightly News (video)/NBC Nightly News (video) - 05-11-2009-170302.m4v)
Overlapped extent allocation (file 6147903 /Music/iTunes Music/Podcasts/TEDTalks (video)/TEDTalks _ Why tribes, not money or factories, will change the world - Seth Godin (2009).mp4)
Overlapped extent allocation (file 6147953 /Music/iTunes Music/Podcasts/ABC World News (Enhanced Video)/ABC World News, 05.11.09 1.m4v)
Checking multi-linked directories.
Checking volume bitmap.
Volume Bit Map needs minor repair
Checking volume information.
Invalid volume free block count
(It should be 15429092 instead of 15431280)
The volume EcoCase300GB needs to be repaired.
Error: Filesystem verify or repair failed.

Time Machine Restore Problem on A New Hard Drive

I am trying to restore my data from my time machine after a hard drive replacement which was done for me at my local Apple Store today. I started my Mac with the new drive and it starts like a new Mac. It then asked me during the first boot if I wanted to transfer from my time capsule which I selected. The transfer process then commenced taking 8 hours. This completed and then it took me Registration Information. This is a form which I filled in but the Continue button is greyed out even though the form is complete. The only field that I cannot enter data into is My Account (a drop down which won't provide me with any options to select). I assume the reason for the continue button being greyed out is because I cannot choose from My Account. However there is no way to select it. So I am in Limbo here. My data has been transfered but I am stuck in this process and can't Go Back (it is also greyed out). ESC doesn't work either. Any suggestions.PLEASE HELP!

Try restoring the specific files.
http://pondini.org/TM/15.html

Ridiculous & grotesque HD crash and Time Machine restore failure! Help?

Trying to make this short. iMac 24" 2009 2.66GHz, 640GB HD, NVIDIA 9400, 4GB ram.
Bought used, installed operating sys from disks, then upgraded to Snow Leopard. All was working fine. Set up Time Machine and it made several backups over two days.
Tonight, for reasons unknown, came into office and screen was on (instead of asleep or screen saver) and fan going 1000 MPH--LOUD!
Cut it off, rebooted, would not boot. Gave me "No bootable device" msg. Booted with OSX 10.5 disk, did UTILITIES/RESTORE FROM BACKUP, restored from Time Machine.
When it rebooted, the gray apple showed up and seconds late a gray shade descended and a black box in center of screen says "You need to restart your computer. Hold down power button until it's off, then press powerbutton again." Says this in 5 languages.
So I did, and the box keeps coming back. Repeatedly.
So then I reboot from OSX 10.5 disk again, go to UTILITIES/RESTORE FROM BACKUP, and restore from ANOTHER Time Machine backup from the iMac 24" I'm replacing, also Snow Leopard updated.
Same result. Black box, "You need to reboot," etc.
***? Am I missing a key step in the full restore? Please advise ASAP as this is driving me batty. not only do I not know what went wrong in the first place (somewhere early on I ran disk utility and did all 4 of the repair/verify options there; all said HD was fine), I have no clue why Time Machine won't restore like I assume it's supposed to!
Please help me before I kill again!

BeerBellyBilly wrote:
My Mac wouldn't boot. Since I had my trusty Time Machine Backup I formatted the drive and tried to use Migration Assistant to use Time Machine Backup to restore everything but when I tried the backup had an error. Is there anything I can do to restore my mac?
You do not use migration assistant to restore from a TM drive.
You boot into your Leopard DVD and use it to restore from TM drive.
You do not need to do anything with your internal drive. Just follow the instructions.

Help! Time Machine Restore Problem From Leopard Server

Hi All,
I just did something dumb with my iMac running 10.6.4 and need to restore all data from my time machine backup.
I have a mac mini running Mac OS X Server 10.5.8 which has a time machine volume on an external USB drive.
I have reinstalled 10.6.4 on the iMac and tried running Migration Assistant to transfer information from a Time Machine backup. I am able to log in to the Time Machine volume successfully but I immediately get an error:
"The Connection Failed"
I have also tried booting into and restoring from the Snow Leopard DVD and get the same results.
I am reluctant to attempt to configure Time Machine for fear that it'll somehow overwrite the backup I have. I do not want to mess with the permissions on the TM backup in order to clone the backup in advance of configuring TM before I get some advice.
Please help! Lost a lot of sleep last night and my wife is very upset.
Below are some console log errors that indicate something is wrong, but google does not turn up anything concrete on the keywords:
11/4/10 7:54:23 AM [0x0-0x14014].com.apple.MigrateAssistant[182] objc[182]: Class MigrationAssistantPane is implemented in both /Applications/Utilities/Migration Assistant.app/Contents/MacOS/Migration Assistant and /Applications/Utilities/Migration Assistant.app/Contents/Resources/MigrationAssistantUI.bundle/Contents/MacOS/Mig rationAssistantUI. One of the two will be used. Which one is undefined.
11/4/10 7:54:23 AM [0x0-0x14014].com.apple.MigrateAssistant[182] objc[182]: Class Process is implemented in both /Applications/Utilities/Migration Assistant.app/Contents/MacOS/Migration Assistant and /Applications/Utilities/Migration Assistant.app/Contents/Resources/MigrationAssistantUI.bundle/Contents/MacOS/Mig rationAssistantUI. One of the two will be used. Which one is undefined.
11/4/10 7:54:27 AM Migration Assistant[182] Couldn't get a connection to the migrateTool after 1 attempt.
11/4/10 7:54:32 AM Migration Assistant[182] (SYS) We've received count = 2 systems
11/4/10 7:54:32 AM Migration Assistant[182] + (SYS) Adding SMSystem : file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/
11/4/10 7:54:36 AM Migration Assistant[182] (SYS) We've received count = 3 systems
11/4/10 7:54:36 AM Migration Assistant[182] = (SYS) Updating SMSystem : afp://server.local./Time%20Machine
11/4/10 7:54:36 AM Migration Assistant[182] = (SYS) Updating SMSystem : file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/
11/4/10 7:54:45 AM com.apple.launchd.peruser.501[85] (com.apple.Kerberos.renew.plist) Throttling respawn: Will start in 373 seconds
11/4/10 7:57:21 AM Migration Assistant[182] (SYS) We've received count = 3 systems
11/4/10 7:57:21 AM Migration Assistant[182] = (SYS) Updating SMSystem : afp://server.local./Time%20Machine
11/4/10 7:57:21 AM Migration Assistant[182] = (SYS) Updating SMSystem : file://localhost/Volumes/Mac%20OS%20X%20Install%20DVD/
11/4/10 8:00:58 AM com.apple.launchd.peruser.501[85] (com.apple.Kerberos.renew.plist[214]) Exited with exit code: 1

I do have an extra external drive that I can copy this file to, by assigning permissions, but am not sure about how TM hides and secures the files needed. I'm worried about messing up the only copy I have of this data.
Don't change anything in the backups. Ever.
Your best bet may be to do a full system restore of the desired backup from the server to the USB drive; then you should be able to boot the iMac from that.
But if you want to copy the backups, you'll have to be logged-on to the server with an account that has permission to copy the sparse bundle.
If you copy just the desired backup, instead of the whole sparse bundle, it won't be recognized as a Time Machine backup, but might work with either +Setup Assistant+ or +Migration Assistant.+

How to recreate Mavericks OS X Recovery partition on Macintosh HD after HDD replacement and Time Machine restore?

Replaced my HDD in my Mac Mini. Restored Mavericks from Time Machine Backup. OS X Recovery partition is missing. How can I recreate the OS X Recovery partition on my HDD?

It actually did restore. Thanks! disk1 is the disk replaced and I see the recovery partition. It just doesn't display in the GUI Disk Utility.
$ diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk0
   1:                        EFI EFI                     209.7 MB   disk0s1
   2:                  Apple_HFS Macintosh HD 2          499.8 GB   disk0s2
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *256.1 GB   disk1
   1:                        EFI EFI                     209.7 MB   disk1s1
   2:                  Apple_HFS Macintosh HD            252.4 GB   disk1s2
3:                 Apple_Boot Recovery HD             650.0 MB   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *320.1 GB   disk2
   1:                        EFI EFI                     209.7 MB   disk2s1
   2:                  Apple_HFS MyBook 320GB            319.7 GB   disk2s2
/dev/disk3
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *2.0 TB     disk3
   1:                        EFI EFI                     209.7 MB   disk3s1
   2:                  Apple_HFS Time Machine Backups    2.0 TB     disk3s2
/dev/disk4
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:      GUID_partition_scheme                        *500.1 GB   disk4
   1:                        EFI EFI                     209.7 MB   disk4s1
   2:                  Apple_HFS GOFLEX500GB             499.8 GB   disk4s2

Time Machine restore problem with network drive

Hi, I switched from PC to Mac. I bought a Lacie Network Space 2 (network hd) in an apple store (turns out it's NOT an apple store, it's an apple premium reseller according to the 90 days free telephone support guy, and apple's policy is then: you should have bought a 'time capsule' then.) That doesn't help me now. So I'm hoping some of you might have had this or similar trouble before. The Lacie drive is able to back up my macbook through time machine. It recognizes the drive and it does my backups on a time machine enable share on the hard drive. So I thought it worked like a charm. Until i wanted to go back to a previous date and restore all my data. I read you gotta start from the mac os install dvd and choose the restore option in utility. It recognizes the lacie harddrive. But when i want to connect to it it will say connection failed! I tried this over wifi (the hard drive connect to my linksys router with ethernet cable) and i tried this with the hard drive directly connected to the macbook with ethernet cable. It always finds the harddrive but when i want to connect to it to choose a previous date to restore, i can't even get there because it will say the connection failed. I'd really appreciate some help, because I tried to go on support pages and look up an answer, called apple, but can't really figure out what's wrong. So it can backup, it can restore single or multiple files in time machine, but it can't restore the whole OS when used with the install disc? Also made a dmg file with disk utility, but this one doesn't recognize the network drive. Finder does however. Any tips? Any at all, please?

Fototom wrote:
I had to mark a 'time machine' checkbox in the Lacie UI for it to be able to work as a time machine drive. So the backups work fine without special terminal commands. It's just weird that it won't restore the full OS back when started up with the install DVD.
Whatever the +LaCie UI+ is, that's probably why you can't do the full restore. That may be doing the equivalent of the Terminal command, to "fool" Time Machine into thinking it's backing-up to a supported destination. But you can't do that when booted from your SL Install disc, so Time Machine can't find the network drive.
I tried the option during Setup Assistant to transfer data earlier, but it won't recognize the drive at that time.
Yes, that's likely for the same reason.
BUT I didn't know about *migration manager*. So the option of installing mac osx again and then creating another user and using the migration assistant, that DOES recognize the time machine backups, will surely work.
Never say "surely" until you know
It would be nice to skip the extra step of having to install the OS first, but this will definitely be a valid option to restore. So for now i'll mark this item solved.
Let us know how it turns out.
If anyone has even a speedier, better option to backup and restore a total disc image (or time machine backup), please let me know.
The time involved is probably about the same; it's just in two steps instead of one.
And there's only one step if you use a "supported" destination: Disks that can be used with Time Machine.

New HD and time machine restore was interrupted. Only half of data transferred.

My HD has been replaced and when backing up from my time machine the transferred got interrupted. When Mac book booted only half the data. So I erased the hard drive to start again although I now can't restore from my time machine as its saying not enough space on HD to restore. Please help coz I'm freaking out!

Follow these instructions for reinstall 10.6, you will need to erase the ENTIRE drive by selecting the drive makers name and size on the left while booted from the 10.6 disk that came with your machine as this is the machine specific version with your free iLife included.
How to erase and install Snow Leopard 10.6
If you use the white 10.6 disk, (it's 10.6.3) then that doesn't have the free iLife, but if you later purchased it from AppStore it can be redownloaded when you get to 10.8 again.
(ideally that older machine should stick with 10.6.8, but you have your files already in 10.8 on the TM drive, so...)
Make sure you erase the entire drive with the Security Erase Zero All Data option, this will "pre-map" off any potentially failing sectors on the drive before they fail with your data on it, it makes your machine a lot more reliable.
Reducing bad sectors effect on hard drives
Once that's all done, log in and setup with your same user name as before (important) and Software Update to 10.6.8, log into AppStore and hold the option key down and click on Purchases, redownload 10.8 and install.
Revisit and redownload other software like iLife etc.
Use the TM drive to bring back copies of your files into their respective folders.
Reboot the Mac holding the command and r keys down, use Terminal and enter resetpassword, a window appears, select your boot volume and user, then reset ACL's, should fix your user permissions issue.
Note: What the AppleStore should have done is installed the 10.8 Recovery HD on your new drive, then you could have just reinstalled 10.8 from that.

Mavericks - clean install with filevault and Time machine restore

Hi All,
I will update my MacBook pro mid 2011 with the new Mavericks OS.
I've activated Filevault on my HDD due to corporate security rules.
I want to make a clean install of the new OS.
I plan the following action:
1 - Make a full backup with Time machine
2 - Create a USB drive with Mavericks on it, I'm using Diskmaker to create it
3 - Start MBP with the USB
4 - With disk utility erase my HDD
5 - Install Mavericks
6 - Reload my data from the Time machine Backup
Question:
I'm a bit Scare about the Time Machine backup and Filevault, any experience with the same configuration, do I risk anythink if I follow my plan ?
Do I need to desactivated Filevault before to lunch my clean install and make the backup after that ?
Thanks in advance for your feedback
Regards
Alain M.

Hi Alain,
I see you never got a reply to this, but I'm wondering what you finally did? I have very similar questions, but I'm "upgrading" from 10.6.8 Snow Leopard. I also have FileVault activated and use a Time Machine backup. Any comments/suggestions/experience you (or others) would like to share would be helpful.
Thanks

Drobo NAS and Time Machine restore problems

Similar Messages

Maybe you are looking for