Droid 2 Gingerbread 2.3.3 Update-ITS HORRIBLE
I am so frustrated with this update for many reasons...
ONE: I didn't have a choice to update or not.
TWO: I can no longer select multiple contacts to send/Fwd a text message. The stupid phone says "No suggestions yet. After I have used the phone a little more, I will find suggestions here that will give me instant access to the people I message the most." THIS IS A BUNCH OF CRAP! I don't want suggestions that people that I message the most! I WANT MY CONTACT LIST BACK! I should be able to get my whole list so I can choose who I want to send/fwd the message to!
THREE: The battery is HORRIBLE! I could go two days or longer(depending how often I used it) without charging it. Now I'm lucky if I can go a whole day without charging it. I have to take my charger with me everywhere I go and pray there is an outlet where I'm going.
FOUR: My phone now freezes, shuts itself off, and toggling through the screens are so much slower.
PLEASE GIVE ME MY OLD PHONE BACK! I USE TO LOVE MY DROID 2.
According to some at the motorola forum's. Verizon has now made the update optional. Would like to know if this is true has anybody else who's phone has not been updated yet had the option to decline this so called update?
Similar Messages
-
My Iphone4S was in the middle of updating its latest software then suddenly it switched off, it hasnt turned on since and I've tried to reset it but only the apple sign appears then the plug into ittnes symbol. I've tried to plug it into itunes but it says my phone is on repair mode which is why it needs to be restored first in order to connect to itunes. I have also then tried to restore it but the error sign appears.
http://support.apple.com/kb/HT1808
-
Droid Razr M Battery after KitKat Update
I recently updated my Droid Razr M with the KitKat update when prompted. Battery life went from not needing to be charged for well over a day, to draining from 100% before the work day ended with light use.
I contacted Verizon and humored them and did the "battery trouble shooting" things with them, even though it appears to be a well known issue. When the troubleshooting had no effect after a few days, we did a factory reset, which also didn't help. I ended up getting a new phone because I had extended warranty coverage.
When I got the new phone, the battery was a dream, just like old times, after 2 days the system prompted me to do the KitKat update, which I did against my better judgement.
Meanwhile my husband also did the KitKat update on his Droid Razr M and started experiencing virtually the same battery problems. Now both of our batteries drain about 50% faster than they did before the update.
My question is, if this is a known issue with Verizon, why bother treating it like user error? It also seems like to "resolve the battery problem" (which they don't acknowledge is a direct product of the update) they ask users to basically not use their phone normally, but limit their usage to get more battery life, which isn't a solution at all. Is there an actual solution related the the problem (the KitKat update) that I can use to extend battery life on my phone? Or should we both call and request replacement phones since the malfunction is not due to any sort of user error?Richard-in-Brooklyn
I'm sorry to hear about the sudden trouble with your battery on the Razr M! Let's check into our options to resolve this. Were any new applications added to the phone recently? Does this continue if you place the device into Safe Mode for 24 hours? Here's how: http://vz.to/LZzdS9
RuthW_VZW
Follow us on twitter @VZWSupport -
i already downloaded the ios 6.0.1 for my iphone when i connected my another iphone to update its asking again to download the ios 6.0.1 how can i use previously downloaded software
plzz help me as soon as possible
-
My mac mini is not updating its software to OSX Lion v10.7.5, which I need for iCloud. I would like to use iCloud on my desktop along with my iphone and ipad but the auto updates are only upto 10.6.8.
You need to get the newer version from the Mac App Store.
(70404) -
My 13" early 2011 macbook pro is having trouble connecting back to internet after going to sleep. before updating to EFI 2.7 it was perfect now after updating its gone bad.
Same issue here too. I will try reinstalling the firmware update. This has happend to me twice. The only way to correct the issue was to reboot.
Thanks! -
when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
whenever you click a picture in photobooth you have to manually insert it one by one in iphoto
i want to know is there any other option in iphoto which can do this type of thing(adding pictures automatically to iphoto )
so that i do not have to do it manuallyOnce you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT -
when ever i click a picture in photo booth it does not automatically update its content is this a bug or i don't know how to do it?
Once you take the photo with Photo Booth, select the photo in the tray at the bottom and click on the iPhoto button just abouve and to the left:
Click to view full size
That will import the photo into iPhoto automatically. But PB does not import any and all photo taken into iPhoto automatically. That choice is left to the user.
OT -
How do I stop a time capsule wanting to update its firmware?
Ive updated my firmware twice and both times I've had to revert back to version 7.5.1 (the version the capsule came fitted with) as the updates have either slowed down its wireless speed or it constantly disconnected and reconnected giving me an annoying warning every couple of minutes to tell me so. It's now flashing orange and 'reporting problems' wanting to update its firmware. How do I prevent the time capsule from wanting to update to a version of the software that doesn't work?
This is one of those hard to find menus.. and it will still not prevent it occasionally requesting updates.. and you might have to reboot it occasionally.
Open airport utility and open the manual setup. In the spotlight box (is that what it is called), in the top right corner which has find a setting.. type updates.
A menu called options pops up.. and you can set it to forget. Check for firmware updates, uncheck.. !!
Update the TC. -
I got my iPhone 5 almost a month ago and updated its iOS but from there on I started having problems, the ph sometimes doesn't respond at all to the touch or apps start to open on their own very rapidly and this continues till it can go no further!
First steps in troubleshooting:
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Then reset: hold down the home button along with the sleep/wake button until you see the apple, then let go. (No data loss) -
when I start up numbers an old version 2.3 fires up but when I go to update its say I have the latest version
Try and force iPad into Recovery Mode:
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times to recover your iPad -
Actually, my iphone was hanged and its screen was not working at all .So, I updated its software from market but for reactivation it require icloud account but i didn't know how exactly it is and i was caught in big trouble . But i have its box and all other accessories .So , kindly help me as early as possible .Thankyou and tell me about its solution
<Email Edited by Host>Basic troubleshooting steps outline in the manual are restart, reset, restore from backup, restore as new. Try each of these in order until the problem is resolved. If you've been through all these steps and the trouble persists, you'll need to bring your phone to Apple for evaluation. Be sure to make an appointment first at the Genius Bar so you won't have a long wait.
Best
GDG -
How to programatically select a row in TableBean and update its column?
Hi,
Can anyone help me on How to programmatically select a row in a TableBean and update its column?
Thanks,
JonHi,
My requirement is I need to update a column in a particular row of the table using fire action...
I have a datefield bean serve as birhdate and base on this I need to update the age column depending on the given dates..
Here's my code under the Process form request for your reference...
if (actionInMainPersonScreen.equals("changeDate"))
String checkId = pageContext.getParameter("paramDatePersonId");
OAFormValueBean depPerId = (OAFormValueBean)depTable.findIndexedChildRecursive("ChildPersonID");
OAMessageTextInputBean depFName = (OAMessageTextInputBean)depTable.findIndexedChildRecursive("FirstName");
OAMessageDateFieldBean dateBirth = (OAMessageDateFieldBean)depTable.findIndexedChildRecursive("BDay");
OAMessageStyledTextBean age = (OAMessageStyledTextBean)depTable.findIndexedChildRecursive("Age");
Date changeBDate = new java.util.Date();
Date dateToday = new java.util.Date();
SimpleDateFormat sdf = new SimpleDateFormat(DATE_FORMAT_NOW);
changeBDate = (Date)dateBirth.getValue(pageContext);
Calendar cal = Calendar.getInstance();
ResultSet empAge = null;
String newAge = null;
OADBTransaction trans = personam.getOADBTransaction();
System.out.println("BirthDate: " + changeBDate + " Date Today: " + sdf.format(dateToday));
String expQuery = "SELECT Trunc((sysdate - To_Date('" + pageContext.getParameter("paramDateBirth") + "'))/365) compAge, Sysdate from dual";
System.out.println("SQL: " + expQuery);
PreparedStatement expPreparedStatement = trans.createPreparedStatement(expQuery ,1);
try
empAge = expPreparedStatement.executeQuery();
} catch (SQLException e) {}
try
while (empAge.next())
newAge = empAge.getString("compAge");
age.setText(pageContext, newAge);
empAge.close();
} catch (SQLException e) {}
regards,
Jon -
How does BDB update its secondary index?
I am asking how does Berkeley DB update its secondary index?
For example, in a BDB table with key value pair ``<k,v1>``, the index database would have reversed pair like ``<v1,k>``. Upon an insert (or essentially an update) ``<k,v2>``, base table record ``<k,v1>`` should be overwritten to ``<k,v2>``.
But how would BDB deal with ``<v1,k>`` in the index table? Will it delete it immediately?Hi,
As long as you correctly open the primary database and secondary index database, and associate the secondary index database with the primary, any update on the primary database will be reflected in the secondary index.
For more information, please refer to Reference Guide for Berkeley DB -> Chapter 3. Access Method Operations -> Secondary Indexes section.
Regards,
Cindy Zeng -
i have purchased a iphone 4s second hand used and when i tried to update its software, it is asking for apple id . i dont have contact with the person to whom i have purchased this device now what should i do
You can't do anything. You have encountered the activation lock. Unless you have some sort of contact with the previous owner you have bought a very expensive paper weight.
You can find out more about activation lock from Apple's site here: Find My iPhone Activation Lock - Apple Support
Maybe you are looking for
-
61 062 & date comes after end of valid factory calendar. (Please correct)
Hi Experts, I am Getting the Error in Creating Purchase Order: Error Message No. 61 062 & date comes after end of valid factory calendar. (Please correct) Please suggest. Regards, Ashok
-
Easy fix for E6 059H6F1 updates - will take 5 minu...
Look, the E6 059H6F1 that we're all stuck with is 100.00000000000% identical, in terms of hardware, with the E6 059D135 that HAS got the Anna and Belle updates. Just make an entry in the update database for 059H6F1 (hereafter known as 'the forgotten
-
Parameters defined for plant and order type
Hi.I want to use the t-code CN25 to create network confirmation. After I input the Network "E00000530001" and press enter,the sap show a error message like below: No parameters defined for plant 1000 order type Z301 Message no. RU010 Diagnosis There
-
Hi experts Is it possible to place F4 help for the function module import parameter like If we excute the FM from se37 the input box should need the F4 help. if possible , let me know the sample code thanks sai
-
I have a formula node with an output variable. When i run my program the first time the output is correct. But when i run it after that, only the previous output value is displayed, the variable is not refreshing. It seems as if the value is copied i