Droid 2 Global unlock to GSM ((

Hello there!
I have a big problem!
I'm not from USA, I'm from Ukraine.
I've bought Droid 2 Global A956 on Ebay. Seller said that it's already unlocked. I've received phone after 1,5months (so I couldn't open case cause time expired). And when I put my SIM - phone said "Enter unlock code" (( I've contacted seller, but he says that phone was unlocked, he lied to me(
I've tried to buy unlock code on ebay but that didn't worked!!
Tell me please, how can I unlock my phone? Or where I can get unlock code?? ((

Thank you.
But I don't have a privilegue to sell on ebay..
Tell me why.. why does VZW change friggin unlock codes??
T-Mobile, AT&T, Sprint does not do that!
Is changing codes used by VZW to raise an army of haters?
I have searched the web - and found many people with problem like mine.
And all of them are speaking bad words in the direction of VZW.
I like Motorola phones, cause they're exclusive in here, but I don't understand VZW politics!!!
Why ?????

Similar Messages

Droid Bionic Unlock Code

Hi all,
Does anyone know if Verizon is willing to provide a SIM Network Unlock code to unlock the GSM side of the Bionic? I've seen a video online where someone purchased a code from a website and got to the screen where it asked for the Network Unlock code....but their code didn't work (probably because the site was shady).
I noticed that Verizon has discontinued selling the Bionic and figured they might be willing to give the out the code.
Any help in unlocking the GSM side of the Bionic is appreciated!

You're much more likely to get help for this kind of question/issue on non-Verizon, non-Motorola sites -- one of the several Droid forums, including but not limited to, xda-developers.
If you've already tried and failed on those sites then I'd guess that it doesn't exist.
Good luck.

Droid dna Unlock code

Hi
i want to use HTC Droid dna in Asia too. My company provides local cdma sims. but Droid dna is unlocked for GSM. is there any unlock code to unlock it and use local CDMA sims and when come to USA use Verizon CDMA sim ?
hope verizon ppl give a positive reply

ok. but saw in some forums for earlier models ppl requested to verizon for unlock code and they were provided which was used and unlocked. in same forum some enquired and the verizon customer care person asked are u using verizon wireless or some
https://community.verizonwireless.com/message/953289
Re: Will my phone can unlockhttps://community.verizonwireless.com/thread/797952

How do you change the text font on the Droid Global Phone

How do you change the text font on the Droid Global Phone. I would like it to be darker (like bold)

Hi.
Below I have provided you with the steps to change your font settings.
From the main menu
Select Settings
Select Display Settings
Select Font Style
You can select from what is available,
Or you select [Get Fonts Online] to find something you want.
Thank you,

Is the iPhone 5 unlocked for GSM in USA

Everything I am reading says that the iPhone 5 is unlocked for GSM and they are required to by law (FCC). Has anyone tried a ATT or T-mobile nano sim in iPhone in USA to verify ? Asking since I want to be able to sell my phone and market it to all carriers
http://9to5mac.com/2012/09/24/verizon-iphone-5-wont-ever-be-locked-most-likely-due-to-the-fcc/
http://www.macrumors.com/2012/09/24/verizon-leaving-iphone-5-sim-slots-unlocked-as-required-by-fcc-network-access-regulations/
My coworker has Verizon iPhone 5 and confirmed SIM unlocked for us in India no issues.

Yes, it is.

HT3275 2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

2 problems: All files are locked - how to globally unlock on the backup drive? I am backing up large video files 500GB on a 2 TB machine. Time Machine repeatedly copies everything using up all of disk space. I only need 1 copy not, twenty. What to do?

My folders missing in email app Droid Global

I can only see the stock folders for my verizon mail on my Droid Global. Why can't I see My Folders that I create?

Hi TyB,
I know it's important to use your email while on the go. I would like to assist, but I do need some additional information. When you mention "Verizon mail," do you mean your verizon.net email? What type of email are you using? Are you using the Mail application on the device (from the Market), or are you accessing Mail from your browser?
When viewing your email on your PC, you do get the option to create your own folders. On your device, only a certain amount of folders are supported, so this may be the reason that the ones you created do not appear. Below is a link for setting up email and all the details for the Droid 2 Global device.
I hope this information is helpful for you, and for other Droid 2 Global users.
http://support.verizonwireless.com/pdf/email_setup/droid2.pdf
Thanks and have a good day!

HT201328 I bought iPhone 5s no-contract phone from virgin mobile...can it be unlocked to gsm carrier?

I bought iPhone 5s no-contract phone from virgin mobile...can it be unlocked to gsm carrier

Their phones are CDMA and locked to Virgin Mobile service only.

Droid Global and Corporate Sync account - message deletion

This applies to Corporate Sync accounts only! Not IMAP or POP accounts, please.
I've read the many threads on this board regarding syncing emails with a Exchange Server. It seems that on my brand new Droid Global, when I delete an email on the phone, it deletes the email also on the server, and so also on my main office PC.
That is, of course, not what I intend to do.
I'm just trying to keep the inbox on my phone clean and simple. I don't actually want to delete the emails on the server. I receive anywhere from 40-50 emails a day, and don't want them on my phone!!
There seems to be a fair amount of confusion going on. Some claim that they are unable to delete messages on the server. Others, like me, don't want this, and want to manage our main exchange account on our office PCs.
Is there any setting I am missing to "delete from device" only, leaving the message in my Exchange account in-box?
If not, this is a pretty serious problem for the many corporate users who might want to switch from their blackberry to Droid. Something Verizon and Motorola MUST address very soon if they intend to offer competition to the iPhone or Blackberry.
Any help would be greatly appreciated. TIA!

That's understandable, and much thanks for the clear explanation.
Blackberry, of course, also "sync's" but gives the option for those who prefer more control over their email. Hopefully this is a feature that Verizon/Motorola can work on for the next software update, as it is rather critical.
Still strange, IMO, since this feature is built in on my POP account. hmmm?
I noticed that the setting you mention (how much mail to keep on the phone) doesn't always work, though. Until this morning, I had all my Tuesday (Jan 4) emails still on the phone, despite my having the phone set to only keep 1 day sync'd - - so its obviously a little buggy, too.
In any case, I guess I'll have to learn to live with it - Update, hopefully, coming soon

DROID GLOBAL PHONE ?

hello all you droid experts. i went to the lake and caught some fish this weekend. i took some short videos with my phone. now when i try to email the video or "Share" the video, it says that the file is too big. it doesn't ask me if i want to shrink the file so i can send it so......can i shrink the file and send it in an email? thanks in advance.

Thanks Ann154 for that feedback and suggestion!
Deerhunter1, I can understand how frustrating that is. I just recently experienced that exact same issue! It was because the video file was too large for me to send either by MMS (picture/video message), or by email. You may be able to send to another device via Bluetooth, giving your device gives you that option. You can also hard wire sync the file to your computer using your USB cable. The subject line says your device is a droid global phone. Below I am including a link for transferring picture & video files from a Droid 2 Global phone to a computer. The link will actually be for transferring music files, however, the concept is the same.
Transfer Music Files - Motorola Droid 2 Global (A956)
Let me know how this works!

Droid Global in St. Martin

Going to St. Martin in a couple of days with my Motorola Droid Global Black which I purchased specifically for overseas travel. When I was in St. Martin previously, I had to rent two cell phones since part of the island is French controlled and the other is Dutch controlled -- each operating separate telephone systems. Question: Can I use my phone there? How do I switch from the US system to their's. I have never done this before, but paid a nice sum for this phone. Please advise ASAP! Thank you.

I hope you have a great trip. You can certainly use the phone inSt. Martin. I included a link here with all you need to from dialing to coverage inSt. Martin. Have a safe trip! Thank you.

Tricky Global Unlock issue

Hello,
I was told my Verizon iPhone 4s was globally unlocked a few months ago, but I have inserted a foreign sim card into it and received the message "SIM Not valid". I take this to mean my phone was not actually unlocked.
The confusing part is that this phone that I would like to be unlocked is not the current phone on my Verizon network account. I switched my phone on the account about a month ago right before I came overseas (I am currently studying in Scotland) so now the phone on the account is a LG cell. I did this so I would not have to pay data fees on my phone in the US when I am studying abroad and paying for another network anyway. Is there anyway I can get my iPhone to be globally unlocked now even though it is not technically in service? Although it is still locked to the Verizon Network.
I apologize in advance if this is a stupid question, any help would be appreciated.
Thank you very much!

Hi there Lucyrose!
I hope your travels have been super safe and you're enjoying Scotland! I will be more than happy to provide some information to see what we can do for you.
We can't fully support the other providers sim card, so you may just need a new one, or I would contact that provider directly. We can however help ensure that your phone is unlocked as it should have been.
I would recommend contacting our Global Support Team. They can be reached toll free from a landline by following these directions:
Dial 0800-279-5088
• After the tone, enter your Verizon Wireless calling card number and PIN. (Calling Card Number: 9085594899 PIN: 2392)
• After the tone enter 0-908-559-4899.
• The VZW Global Roaming Hotline will then prompt you to enter your 10-digit mobile number.
Study hard and have fun! If you have any other questions, please let us know.
Thanks,
MelissaM_VZW
Follow us on Twitter @vzwsupport

Is droid maxx unlocked?

Before we left for Costa Rica, I asked Verizon whether our Droid Maxx could take a Sim card from a vendor down here. I was assured that it would work.
We tried a Movistar store, but it did not pick up any network.
Is there something special I have to do?
Right now, I only have an HP tablet, running Android and can't get to the support chat
Help me please!

@Skydaver2,
Let's get you up and running! I definitely understand the importance of being able to use your phone while traveling in Costa Rica.
I do see that the Droid Maxx is a global phone and it is unlocked for you to use a local carrier's SIM card. Unfortunately, we are unable to troubleshoot the phone with a different carrier's SIM card. You will need to reach out to the local carrier for assistance.
If you want to use VZW service while in Costa Rica you will need to add Global services to your line. Visit http://vz.to/1aGvDAs for information on what you need and the rates.
JohnB_VZW
Follow us on Twitter @VZWSupport

Global Service Monitor (GSM) Config

Hello all, I have recently configured GSM with the external monitoring services being in the U.S.
When I look at the monitor - Authoring>MP Objects>Monitors>Multi-URL Template (*Monitor Name*) it shows enabled is set to true.
However when I look at - Monitoring>Monitoring>Application Monitoring>Web Application Availability Monitoring>Web Application Status - The monitor does not have a check mark next to it.
When I look at - Monitoring>Monitoring>Application Monitoring>Web Application Availability Monitoring>Test State - none of the five external servers are checked and they all say "Not Monitored"
So I'm trying to figure out if it's enabled or not and if not where do I go to enable it? When I have setup internal (Non GSM) web tests they are just enabled so I'm not sure what's different with this one.
Thank you,
Matt

Hi,
Would you please restart the health service on the external servers. And we may try to flush health service state and caches for those server.
In addition, have you followed the below link to install GSM:
http://scug.be/christopher/2013/07/11/system-center-global-service-monitor-installation-step-by-step/
Regards,
Yan Li
Regards, Yan Li

Issue in Global Services Monitor GSM

Dear all,
I'm facing a problem in Global Services Monitor.
The Resources pool contains 4 Management Servers; 2 old and 2 recently installed.
The GSM was installed and was working normally on the old Management Servers.
But, after increasing the number of management servers to be 4 instead of two, the problem appeared.
The GSM is firing alerts on the new MS's and their state are critical (old 2 servers are healthy).
The alert description is as below:
Global Service Monitor Modules: Failed to discover Global Service Monitor locations.
Failure step: 'Couldn't get the ACS endpoint from discovery service. SubscriptionId: 'a6846da0-e5d7-4bea-ab13-836d89364b60', OutsideInServiceBaseUri: 'https://gsm-prod.systemcenter.microsoft.com/''
Message: 'Could not establish trust relationship for the SSL/TLS secure channel with authority 'gsm-prod.systemcenter.microsoft.com'.'
Details: 'System.ServiceModel.Security.SecurityNegotiationException: Could not establish trust relationship for the SSL/TLS secure channel with authority 'gsm-prod.systemcenter.microsoft.com'. ---> System.Net.WebException: The underlying connection was closed:
Could not establish trust relationship for the SSL/TLS secure channel. ---> System.Security.Authentication.AuthenticationException: The remote certificate is invalid according to the validation procedure.
at System.Net.Security.SslState.StartSendAuthResetSignal(ProtocolToken message, AsyncProtocolRequest asyncRequest, Exception exception)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessReceivedBlob(Byte[] buffer, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.StartSendBlob(Byte[] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
at System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
at System.Net.ConnectStream.WriteHeaders(Boolean async)
--- End of inner exception stack trace ---
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.IDiscovery.GetEndpoints(String subscriptionId)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.DiscoveryHelper.<>c__DisplayClass1.<DiscoverAcsEndpoint>b__0(IDiscovery service)
at Microsoft.SystemCenter.Cloud.SharedLibrary.RestCallHelper.ExecuteRestCall[TContract](Uri endpointUri, WebProxy webProxy, String accessToken, RestMethod`1 method)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.DiscoveryHelper.DiscoverAcsEndpoint(String subscriptionId, Uri outsideInServiceBaseUri, WebProxy proxy)
at Microsoft.SystemCenter.Cloud.OutsideInUnitModule.DiscoveryWriteActionModule.Execute()'
Any clue?
Regards,
Khaled A. Hamad

Hi
Is there any requirement to install the Microsoft Root Certificate on the server where SCOM console is working? Shall I need to purchase Windows Azure Subscription also for GSM? Please let me know.
The scenario is - I have one SCOM server (Including all the server roles on the single server) and other server where VMM server and SCOM console is installed. I have installed GSM Management Packs on the SCOM server and configured one Web Availability Monitor
to be monitored from external servers (e.g. Chicago).
I am getting the below error:-
Log Name: Operations Manager
Source: Health Service Modules Ex
Date: 9/11/2014 7:14:26 PM
Event ID: 10001
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: SCOMCLOUD.abc.in
Description:
Global Service Monitor Modules: Failed step: 'Couldn't get the ACS endpoint from discovery service. SubscriptionId: '1f156904-532e-416f-b570-1141438392a3', OutsideInServiceBaseUri: 'https://gsm-prod.systemcenter.microsoft.com/''. Diagnostic context: RequestId
= '0fe72d85-989c-4c1b-89c1-1f4b641c1578', New ConfigHash = '65afc4b6-c18d-5e68-56d3-482e2db1851a', '1' tests, Last ConfigHash = '00000000-0000-0000-0000-000000000000'. Exception: 'There was no endpoint listening at https://gsm-prod.systemcenter.microsoft.com/DiscoveryService/1f156904-532e-416f-b570-1141438392a3/Endpoints
that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.'
One or more workflows were affected by this.
Workflow name: Microsoft.SystemCenter.Omonline.OutsideIn.Discovery.ConfigUploaderRule
Instance name: Global Service Monitor
Instance ID: {298CB0DA-4453-EFD2-A7AC-C2E8F2F7100D}
Management group: SCOMGROUP
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Health Service Modules Ex" />
<EventID Qualifiers="0">10001</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-09-11T13:44:26.000000000Z" />
<EventRecordID>149790</EventRecordID>
<Channel>Operations Manager</Channel>
<Computer>SCOMCLOUD.abc.in</Computer>
<Security />
</System>
<EventData>
<Data>SCOMGROUP</Data>
<Data>Microsoft.SystemCenter.Omonline.OutsideIn.Discovery.ConfigUploaderRule</Data>
<Data>Global Service Monitor</Data>
<Data>{298CB0DA-4453-EFD2-A7AC-C2E8F2F7100D}</Data>
<Data>Failed step: 'Couldn't get the ACS endpoint from discovery service. SubscriptionId: '1f156904-532e-416f-b570-1141438392a3', OutsideInServiceBaseUri: 'https://gsm-prod.systemcenter.microsoft.com/''. Diagnostic context: RequestId = '0fe72d85-989c-4c1b-89c1-1f4b641c1578',
New ConfigHash = '65afc4b6-c18d-5e68-56d3-482e2db1851a', '1' tests, Last ConfigHash = '00000000-0000-0000-0000-000000000000'. Exception: 'There was no endpoint listening at https://gsm-prod.systemcenter.microsoft.com/DiscoveryService/1f156904-532e-416f-b570-1141438392a3/Endpoints
that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more details.'</Data>
<Data>Global Service Monitor Modules</Data>
<Data>Couldn't get the ACS endpoint from discovery service. SubscriptionId: '1f156904-532e-416f-b570-1141438392a3', OutsideInServiceBaseUri: 'https://gsm-prod.systemcenter.microsoft.com/'</Data>
<Data>RequestId = '0fe72d85-989c-4c1b-89c1-1f4b641c1578', New ConfigHash = '65afc4b6-c18d-5e68-56d3-482e2db1851a', '1' tests, Last ConfigHash = '00000000-0000-0000-0000-000000000000'</Data>
<Data>There was no endpoint listening at https://gsm-prod.systemcenter.microsoft.com/DiscoveryService/1f156904-532e-416f-b570-1141438392a3/Endpoints that could accept the message. This is often caused by an incorrect address or SOAP action.
See InnerException, if present, for more details.</Data>
<Data>System.ServiceModel.EndpointNotFoundException: There was no endpoint listening at https://gsm-prod.systemcenter.microsoft.com/DiscoveryService/1f156904-532e-416f-b570-1141438392a3/Endpoints that could accept the message. This is often
caused by an incorrect address or SOAP action. See InnerException, if present, for more details. ---> System.Net.WebException: The remote name could not be resolved: 'gsm-prod.systemcenter.microsoft.com'
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
--- End of inner exception stack trace ---
Server stack trace:
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.IDiscovery.GetEndpoints(String subscriptionId)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.DiscoveryHelper.<>c__DisplayClass1.<DiscoverAcsEndpoint>b__0(IDiscovery service)
at Microsoft.SystemCenter.Cloud.SharedLibrary.RestCallHelper.ExecuteRestCall[TContract](Uri endpointUri, WebProxy webProxy, String accessToken, RestMethod`1 method)
at Microsoft.SystemCenter.Cloud.SharedLibrary.Discovery.DiscoveryHelper.DiscoverAcsEndpoint(String subscriptionId, Uri outsideInServiceBaseUri, WebProxy proxy)
at Microsoft.SystemCenter.Cloud.OutsideInUnitModule.ConfigUploaderWriteActionModule.Execute()</Data>
</EventData>
</Event>
Any HELP would be really Appreciated.
Thanks in advance.
Abhinav | MCTS-Server Virtualization

Droid 2 Global unlock to GSM ((

Similar Messages

Maybe you are looking for