Droid 3 camera - how to use it?

I'm unable to find instructions on how to use the camera feature and it's not very intuitie. All the videos I found onine were "removed by user" and the instruction booklet doesn't even mention the camera. Can someone point me to a post or article that can give basics? Thanks!!!!

StreetDocRN, thanks for the link!
CARDIFFDIVER, I understand how difficult it can be to learn how to use a new phone and all of its features. First, visit our support page to where we have a simultator for the Droid 3 that shows several features of the camera. Just click on camera under the simulator and there are several options. Also, here is a video of some of the camera basic features. 
Hope that helps!

Similar Messages

  • HT1695 I know nothing about how to use my new ipod and when reading the little bit of information in the folder that came with it, all I can do is turn it on, but it just powers down after a few seconds.  How do I work this thing?

    I know nothing about how to use my new ipod and when reading the little information that came with it, all I can do is turn it on.  Then in a few seconds it goes black, never having brought up a screen to do anything!  Help!  What do I do to get this thing going?

    You might consider connecting it to the charger and charging up the battery overnight.
    Please Get the iPod Touch User Manual for iOS 5

  • How to use my dv camera on my mackbook(Late 2008)

    hi... my name is Thiago.. and i have an sony digital video camera that i used in my old mackbook with a firewire 6 pin cable..
    but now i cant use my camera because there is no firewire 6 pin connector in the macbook(late 2008)
    my camera have a firewire 4 pin output, and i dont know how to connect my camera to my new macbook.. please help me..
    thaks!

    Matt Clifton wrote:
    Hi
    Unfortunately, you can't. The new Macbooks are not designed to be connected to any Firewire devices. A wrongheaded decision, sure, but you do have to carefully check these things when you buy a new computer.
    Matt
    Matt's right. *Except for the part about YOU having to check carefully before you bought the computer.* See, Firewire is an interface STANDARD for consumer video. Last time I checked, EVERY PC in Best Buy had a Firewire 400 port included. And AFAIK, Apple invented and heavily promoted Firewire for video for the last decade, so it's not unreasonable for consumers to expect all Apple computers to comply with their own standard. ESPECIALLY, Thiago, given the premium price you've just paid for that shiny new MacBook.
    Unfortunately, you need to do one of three things:
    1. Attempt to return the MacBook in exchange for the plastic White model. Be assertive in that it is on APPLE'S shoulders to inform the customer they are omitting the Firewire interface.
    2. Buy a cheap PC for editing video. (Yuck!)
    3. Buy a new camcorder. This is the most expensive option (and billionaire Steve Jobs' recommendation). However, Be Warned! Even with your new camcorder, there is no guarantee it will work with your new MacBook. You DO have to research this option carefully. Search Macworld.com for the article: "Tapeless camcorders are not a Mac's best friend"
    Good luck. And be sure to let Apple know how you feel! They've left a lot of loyal customers in the lurch on this one for sure!
    http://www.apple.com/feedback/macbook.html

  • Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

    Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

    Hello, I am trying to use a photo,that I've opened up in pages on a blank landscape, taken from my camera roll and use it as album cover art. All the custom text's will not paste when I copy.  Pic and texts are saved as a PDF, how can I paste the doc ?

  • How to use the integrated camera in Lenovo THINKPAD X301

    Dear All,
    I would like to know how to use the integrated camera for the THINKPAD X301 LAPTOP?
    Please help

    Hi ,
    For Lenovo product , we need application software to activate this camera. You can use the Picasa software which can search from Google to activate this camera.
    After install Picasa > Picasa > Import > Select Device ( then choose your camera )

  • I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

    I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s

    I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
    Your call of course but IMO a waste of money. Please read this first:
    There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
    You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
    https://discussions.apple.com/docs/DOC-2435
    The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
    More useful information can also be found here:
    http://www.reedcorner.net/mmg/

  • Getting this message when trying to access our cameras, how to fix? This address is restricted This address uses a network port which is normally...

    Just installed Firefox for my boss, and ran into something I've not seen before. When trying to access our private camera system, that uses specific ports, I got this message: "This address is restricted - This address uses a network port which is normally used for purposes other than Web browsing. Firefox has canceled the request for your protection."
    Cannot find a setting in Firefox to correct this problem. Please help.

    Hello,
    Can you please check if either of these links help in the resolution of the issue
    # [http://kb.mozillazine.org/Network.security.ports.banned.override Firefox ports override]
    #[http://blog.christoffer.me/post/2012-02-20-how-to-remove-firefoxs-this-address-is-restricted/ Remove Firefox this address is restricted error]
    Thank you

  • I do have a gray application DVD that came with my MacBook Pro by how to use it

    I do have a gray application DVD that came with my MacBook Pro by how to use it.

    You don't, your signature says you have 10.7.5 and the disk is either 10.5 or 10.6, has outdated software on it.
    Keep it in case of emergency in a very safe place in case you need to reinstall on a new drive, then upgrade to 10.7.5 again.
    https://discussions.apple.com/community/notebooks/macbook_pro?view=documents

  • How to use the camera kit

    Hi does anyone knows how to use the canera kit ? What are the other software that need to download? Thx

    Hi,
    You don't need any software to use it. If you connect your camera through the camera connection kit to the iPad (either by USB or just the SD card), the app Photos will open and you will see the multimedia content on your camera and have the opportunity to select what you want to import on your iPad.

  • How to use the camera connection kit for iPad 3rd generation?

    Hi I just bought a new camera connection kit for my iPad 3rd generation. Does anyone have any experience or knows how to use it? I tried to connect a USB to it and nothing happened. Please help...

    This is how you use it.

  • How to use ans E\external camera as choice in ichat ?

    I have a macbook pro with a built in isight. I've tried using two other cameras as video source with no luck. both are cannon mini viedo cameras, The first camera I needed to get a firewire adaptor for. from a dv port of a camera to the firewire port of the pro. The second from the dv port to the usb port of the pro. I go to avchat preferences/video but only get the isight as a choice. What am I missing ? Do I need to install drivers ?

    You're welcome, Joe.
    I cannot find DV950 as a Canon model.
    (1) Perhaps you mean a Canon ZR950?
    If so, according to the info on page 67 of the ZR950 Instructions Manual, you should be able to connect to the Firewire (iLink® / iEEE 1394) port on the camera.
    More info about some "ZR" Canons: http://support.apple.com/kb/TA26556
    Try the suggestions there or contact Canon, Inc to see if they have ideas that might help you.
    (2) If not, perhaps have a Panasonic PV-DV950?
    If it is a Panasonic, according to the info on page 58 of the PV-DV950 Operating Instructions user manual, you should be able to connect to the Firewire (iLink® / iEEE 1394) port on the camera.
    More info about "PV" Panasonics here: http://docs.info.apple.com/article.html?artnum=113547
    Try double clicking buttons to see if that improves function?
    (3) In either case, no additional drivers or software are needed. Read your manual for hints on how to use your camera as a video source. Concentrate on how to record directly to a VCR from your camcorder, etc.
    Check for tape or head-saver operations. They may limit the functions you want. For example, Canons must be plugged into wall power. Some brands require that you remove tape for it to work. Some require that you leave the LCD view screen open in order for your camcorder to output its DV signal to Firewire. The manual will tell you.
    If nothing else works, unless you are willing to use a different camcorder or computer, try an alternate connector such as those suggested in my previous response.
    Message was edited by: EZ Jim
    Mac Pro Quad Core (Early 2009) 2.93Ghz Mac OS X (10.6.4); MacBook Pro (13 inch, Mid 2009) 2.26GHz (10.6.4)
    LED Cinema Display; G4 PowerBook 1.67GHz (10.4.11); iBookSE 366MHz (10.3.9); External iSight; iPod touch 4.1

  • How to use functions in back camera in ipad2

    Below is the tech spec for "Back Camera" of iPad2 however there is no info or discussion I could find on "how to use zoom function in still mode", can you help?
    Back camera: Video recording, HD (720p) up to 30 frames per second with audio; still camera with 5x digital zoom
    Also if I start a video recording then will it automatically start in HD mode or do I need to make any changes anywhere before recording starts?

    Video is always HD.  You need to read the User Guide, page 61:  User Guide

  • How to use batch processing with jpg pictures taken with iphone cameras?

    How to use batch processing with jpg pictures taken with iphone cameras?

    Open the editor . Go to file>process multiple files
    Sent from my iPad

  • How to use FCPX to edit from multiple cameras and keep audio in sync?

    I apologize if this is obvious.  I thought I saw a discussion about it in this list already but I cannot find it for the life of me.  And I am a relative newbie to video editing.  Here's my question/problem.
    I film live musical performances using a three-camera setup.  Using Final Cut Express, I typically bring the clips into a multi-track timeline and sync the clips to the master audio.  Then to create the edit of the performance, I go through the performance and essentially select a camera angle by cutting it out of it's track and dragging it up to a fourth video track.  Utlimately, this fourth track (with suitable transitions) becomes the final product. 
    The point being that it's critical that all three cameras be kept in sync so I can choose whatever angle works best without having to do additional audio sync of any kind.
    The question is, is this approach to a synchronized multi-camera edit possible/practical in FCPX?  Or is there a different approach/workflow that FCPX encourages that will get the same effect?  Otherwise, I cannot see how FCPX will work for any kind of multi-camera project where there is a fixed timeline imposed by the audio track...
    -Tom

    FCP X has its own forum located here: https://discussions.apple.com/community/professional_applications/final_cut_pro_ x
    -DH

  • How to use iSight camera as security centre

    How to use iSight camera as security centre

    can you elaborate?
    security centre can be many things
    and most hardware and network setups would likely not work with usb webcams
    but again it really depend on what you mean by security centre

Maybe you are looking for